get photos after making discks of recovery? ___

Similar Questions

• I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message 'too big for the server.

  I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message "too big for the server" responses I've seen so far tell me absolutely nothing

  Well, the error message says it all.  "" too big for server".

  There is a limit imposed by your ISP/mail server, which you don't mention.

  Not only the servers have limits on the size, this is not necessarily the same for incoming and outgoing messages.

  If you say you use the e-mail program and the name of your e-mail server, maybe we can shed light on the more specific issue, but the problem is definitely with them and not Outlook Express.

  P.S. I'm not sure what you mean by 'signature'

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  Molloy10 wrote:

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  What changes?

  What program?

• After making an album, the photos are still under all photos?

  Is there a solution to remove all the photos after creating photo album?

  Thank you

  This is how it is supposed to work - all displays all the photos. Also note that you can put the same picture in multiple albums, if you wish.

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.

• Equium L350 - Vista fails to start after the installation of recovery

  Hello world

  I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
  I get: Windows cannot repair this computer automatically click finished to turn off your pc

  After a format and reinstall my computer broken? He is 13 months here for out of warranty

  Hello

  Normally after the installation of recovery your laptop should work fine again.

  In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
  Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.

  I also recommend to check the RAM for errors: http://memtest86.com/
  Memtest is a good diagnostic tool for the RAM.

  I hope I could help a bit. :)

• Older versions of the iphoto library are not appearing in photos after upgrade to el captain

  I just upgraded to el captain and impossible to find the other version of iPhoto libraries created to store photos older.  With iPhoto, I used the 'option' key when you open iPhoto and could select one of the old libraries to open.  I do not see them in the new application photos after the upgrade.  Where did go and how can I get back them?

  Oh, BTW, I use Time Machine to backup to a local HD so I hope that the worst of the case here, it is that I have to restore from a backup.  But if this is the case, how to create multiple versions of libraries of Photos?

  Pictures of launch with down option, click on another library and access them. You will need to know or know where they are stored on the computer.

  (137960)

• Are Canon SX50 - programming (with RAW) mode you able to review the photo after you take it?

  Just bought my camera and have carefully read the manual.  I want to work in program mode, so that I can shoot in RAW.  However, I can't seem to figure out what combo of menus and functions, I can use so that I can get a review of my photo after consider.  This feature works well in Auto Mode - but in Auto Mode, I can't shoot in RAW.  Anyone?

  Thank you

  You should be able to press the control button to the right of the optical viewfinder to view images, regardless of what you are in the mode. It does not matter if the image is so RAW or JPEG. I assume that you entered in the menu and ensures that you do not have the exam put off.

  Steve M.

• Recover my photos after Ctrl + C

  Hello
  I copied some photo files from my digital camera to my laptop. After copying, I lost the path of it. I tried to get photos and I found them too. I tried to copy files from the search with Ctrl + C Panel and gave a Ctrl + V in my folder, but the message came as "impossible to read the source file. After this message all around 400 not found once again in the search. I pdid any kind of research, but I'm not able to find these photos. My bad time I gave a delete in my digital camera after copying photos. Please help me to recover these photos like these r those very valuable. Is this a bug in the operating system?

  Try Recuva to recover photos deleted from the camera.

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• Get Photos 'from files and folders"does not work beyond the letter 'G '.

  I have PSE - 7 is installed in Windows 7 64 bit. The program seems to work fine except for this:

  I have a very important folder; (141 GB, 2 500 files, 207 000 files) The command 'Get Photos from files and folders' stops working in the middle of the letter 'G'...!

  I have the same folder in a machine running Win XP, and both PSE 5 and 7 PES do not exhibit this behavior. Can I import from any letter of the alphabet...! (LOL)

  The catalog associated with this installation file has been optimized and recovered.

  This folder is located on the "G: /" drive (volume).

  HARD drive "G /: ' has been fully formatted (not a quick format).

  The only exception may be the way things should have been done, is that the catalogue was opened under the drive letter and the serial number of the drive.

  Using the drive letter, this catalog open immediately. Any ideas...?

  I learned that from the PSE 6, PSE uses the serial number of the HARD disk and not the letter of the reader to access the content. However, a catalog will still open and register correctly, using only the letter of the drive from it's previous machine. (Note that this is the same behavior as earlier versions of PSE, such as PSE-5, which depended only on the drive letter).

  --> When we say that the ESP is not dependent on the drive letter to access its content, it doesn't mean that the PSE will display the serial number of the HARD disk in the application. In this case, you have changed the drive letter from E to F, PSE media will not suffer.

  I'm usually import a whole folder. Until the letter 'G', PSE - 7 works as expected. The photos appear in the organizer and are accessible in all directions. After the letter 'G', it is impossible to select any folder inside the dialog box «Get the folders of files and folders» When the element is highlighted, the letters blink and change for other mailings, then selection resets nothing selected. After 'G', I have to use the, command "Get pictures by the research. This works as expected. Once the pictures are inside the Organizer, everything is as it should be.

  --> This is a known issue. Simply select "All Files" in the "File Type" drop-down list present in the import dialog box. After that, it will work very well.

  Just to sum up PSE6 or PSE7 are not supported under Win7 so you could face some issues.

• A Bug in Get Photos and videos of files and folders in PSE 8

  Today, I shot a few pictures with my digital camera, then used the Canon software to load to my computer that is running Windows 7 x 64.  The Canon software created a folder named 2010_05_31 in the C:\CanonPowerShot directory and downloaded files. Explorer Windows see the folders and files.

  I started PSE8, has chosen to organize, then a Ctrl-Shift-G to catalog the new images. Organizer is in the thumbnail view. I've navigated to C:\CanonPowerShot and scrolls to the bottom of the window to find the 2010_05_31 folder. Oops, the list ends at 2010_05_13, the last folder I was cataloged in the Organizer.

  I cancelled the import and switched organizer at the sight of folder location. Since I had already catalogued records of C:\CanonPhowerShot, all files have been listed in the left pane - including the new folder 2010_05_31. I have a right-click on the 2010_05_31 folder icon and selected import feature. The files have been imported correctly.

  I went back to the display of the thumbnail, once again clicked on Ctrl-Shift-G and navigated to the directory C:\CanonPowerShot. Once more the list of files ended with the 2010_05_13 file. This time, I looked through the list of 75 records and found the second 2010_05_31 file from above, as indicated between the 2004_09_30 and 2004_10_01 folders.  In other words, it is out of sequence of collation.

  To summarize: when you try to add pictures using the Get Photos and videos from files and folders, the window to select files is not in the proper sequence of ranking. The files are in the right sequence of classification in Windows Explorer. The files are in the sequence of classification appropriate in the left pane in the location of the Organizer folder view - before and after importation. The only non alphanumeric character in file names is the underscore character (_); There is no periods (.).

  Since the folder is listed in the correct classification sequence in both Windows Explorer and in the left panel of the display location of the Organizer folder, I doubt that there is not displayable character in the name.

  Also has anyone seen this problem?  How we report these bugs to Adobe, or should I even bother?

  I wonder if the Browse dialog box has somehow decided to sort by other criteria.  Refer to the screenshot below and try the following steps:

  1. in the file > get Photos and videos > window of files and folders, click the View Menu (1).

  2. Select Details (2).

  3. click on the column name to sort by name - clicking again changes the order increasing, decreasing and vice versa.

  4 try clicking on some of the other columns to sort by them.

  

  Different versions of windows supposedly remember the last settings for a folder, but I can't ever understand their 'smart' rules to achieve this. Every time I open a file in a standard Browse dialog box or in Windows Explorer, it is often appears in view of evil with the incorrect sort order.

• PSE 8 - files from a restore disappear when I try to get photos

  The "get photos and videos" feature does not work correctly.

  I recently moved from a Win XP computer running PES 6 to a Win 7 PC running PSE 8. On my old computer, I backed up my catalog on a disk hard ext. Then, on the new PC, I imported a few files that I had to work then. Then I restored the catalog on the new computer to a new location - the Adobe folder in my pictures, not to keep the old file structure. All photos appeared in the Organizer. But when I go on "get photos and videos, it brings me to a folder in the Adobe folder, but no name shows from the folder at the top of the selector box. And then when I go up a level to Adobe, a few tens of my photos folders disappeared. When I click on the files that are left to choose the photos inside, several folders disappear generally. So I wonder why this is happening. The folder that is displayed when first trying to get photos is one that I saved to the last night of the HDR Photostudio 2 trial version yesterday while I was PES 8 running. I first noticed the problem after that. BTW, I see thin files in Windows and sometimes I can see all folders before they begin to disappear.

  It's yet another bug - if you put a backup on a drive that also contains photos of the catalogue, and restore you from the backup while the disc is still connected, PSE mad.   To work around it, you need to copy the backup to another drive, disconnect the original drive and then do the restore.   You can disconnect the external disk and file > reconnect > all missing.   See this FAQ to learn how to get the command to reconnect to go fast:

  http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#_Quickly_reconnecting_large

• How to recover a file photo after emptying the trash

  How to recover a file photo after emptying the trash on my Mac book pro?

  Thanks for your response

  Restore your time machine backup file.