Get the Bluetooth driver to install on my Inspiron 1420
Hello
I went to the Dell drivers and downloads of the site in order to get a driver for my bluetooth. The driver that I found was C:\DELL\DRIVERS\R140135, I checked the compatibility and it is supposed to be compatible with my system and Windows Vista 32-bit. However, whenever I try to install it, a window opens asking me to press Fn + F2 or Radio on/off switch. FN + F2 does not work and there is no switch radio. I tried to start again from the beginning, now, that is to say my I need Windows Vista to install this driver... I use Windows Vista. I checked the Device Manager... no typical points or question marks. Anyone know what is happening?
Thank you
Rannuda
I replaced Vista 32-bit with Windows 7 32 bit and I get the same problem, try to install the driver of the blue tooth on my Vostro 1500.
Help, please
Tags: Dell Products
Similar Questions
-
Cannot get the printer driver to install the Satellite Pro C660
tried to install epson rx560 driver printer (windows 7 64-bit) the satellite pro c660 but it fails epson told me to consult a technician because the printer driver is very good
Any help would be welcome
I don t think that it is a mobile phone number.
In my opinion, you should visit and check the Epson support page:
http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-RX560/drivers-support -
I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.
Check this box:
-
HP Pavilion dv6 Notebook PC: cannot install the Bluetooth driver
I have a HP Pavilion dv6 A1U55AV who had a hard drive failure. After replacing the drive and the installation of the operating system, I was able to get all the drivers reinstalled except bluetooth. First of all, the HP support site gives me three options... Looks like it should just give me a. Which should I use?
I tried to use the Intel PROSet Bluetooth Driver, but I get the following error on my machine (FYI - Windows 7 Professional 64-bit Service Pack 1 is my operating system).
I'm using the correct driver, and if so, why the installer does not work?
Hello:
If you are sure that your laptop came with built-in bluetooth (the Realtek 8188CE wireless card can come in a combination or card bluetooth not combination), then this is the bluetooth driver you need for this wireless card.
-
I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery
I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery
How much it costs
I need to perform a recovery for ssd only
I need direct link for that
Nice day.
He was never a way I know of to download games Windows OEM Lenovo recovery disks. That the process is managed by Service, you'll need to contact them directly (see info below). If I understand correctly, they will confirm your OS by checking the serial number of your machine.
I hope this helps.
Kind regards.
-
Problem in installing the bluetooth driver
I have a laptop of model 15-e038tx, the driver bluetooth recommend windows8 is Ralink rt3290-01. This driver is not available in the HP driver package, and any other driver Bluetooth does not work.
Is there any need of parameters to change or no driver to install before the bluetooth driver? Please help me solve this problem.
Hello
Please try:
http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64949.exe
If not, please post back its hardware id using the following method to find out:
http://www.WikiHow.com/find-hardware-ID
Kind regards.
-
I have an Acer Aspire TimelineX 1830 t-68U118. The original hard drive died, so I replaced it with a new hard drive. I loaded Windows 7 x 64 and loaded the chipset drivers and the network drivers. The laptop is always my bluetooth equipment (even if I loaded the drivers Atheros). Does anyone else have this problem? How can I get the bluetooth to work?
It would probably depend on the status of the warranty of the system.
You must contact the service for options.
-
I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?
original title: reinstall Windows VistaI was getting a new hard drive to my HP laptop. Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?
Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.
-
Hi, I bought a PC with Windows 7 pre-installed, refurbished but the case has a product key for Windows 2000, because he's company ex machine that has been upgraded. I installed a new hard drive and to keep my files, I copied all of the old disk to the new including the operating system. It worked well for a while, but I'm now getting the message "this copy of windows is not genuine". I found the product key of the old drive, but when I enter it on the new one it always says that it is not authentic. Is it possible that I can get the new drive to work without the one installed beside it?
Original title: activate windows 7
How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) to select your "country" you are in the drop-down list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700What's the relationship between activation and genuine Windows?
http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-WindowsWhat is the validation, and how does it work?
Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvistaAuthentic Microsoft software program privacy statement
What data is collected?
http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement- Product key numbers and letters .
Not confused the letter B with the number 8, the letter Q with the letter O.
the letter G and the number 6.A, E, I, O and u are not used.
---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspxRegister Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/register
Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
filled with tips, creative tips and other information to you help get the most out of Windows 7.
You also get a subscription to the monthly newsletter of Windows Explorer,
where you will find other tips and tricks, as well as special offers.Learn about Activation:
http://TechNet.Microsoft.com/en-us/library/ff793423.aspxJ W Stuart: http://www.pagestart.com
-
Hello
During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.
I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.
Problem: I get the cannot install because it is a GPT partition.
Y at - there no way to make these 2 USB sticks work?
Thank you, Brad
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.
The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.
You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.
After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.
If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.
In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".
I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
HP 15 laptop: the bluetooth driver problem
I have a HP 15 Notebook PC with operating system windows enterprise 8.1 N.
my bluetooth driver does not work, it is very difficult to install the driver and activate bluetooth.
my product number is J8B79PA #ACJ.
can you please send me the link to install the bluetooth driver...
Hello:
According to the list of parts for your laptop, it has a Ralink RT3290LE 802.11bgn 1 x 1 Wi - Fi and Bluetooth 4.0 adapter combination WLAN.
It would be the bluetooth driver you need for this model of the wireless card.
This package contains the installation package driver for Bluetooth Mediatek (Ralink) in the laptop models running a supported operating system.
File name: sp69545.exe
-
How to get the display driver for hp250 g1 for windows7 32 bit
Hi, I bought a laptop HP 250 G1 & installed windows 7(32bit) but I'm not able to find the display for this driver. The i found on the site of hp drivers named AMD graphics high definition hd extracted al drivers driver in drive c, but there is no display in driver. Please help me to get the display driver. I will always be grateful.
Paiva
Hello:
I see that your model comes with an AMD graphics adapter. See page 4 on the link below.
http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04111387
See if this Intel graphics driver works for you...
-
Pavilion dv6 6154tx: installation of the Bluetooth driver
Tried to install the ralink bluetooth driver software but a message like
"Bluetooth hardware must be enabled to run this installation package.
Please help me to install.
Model: pavilion dv6 6154 tx
OS: windows 7 Home premium (64-bit)
Hello:
Yes, that should be the correct driver to install bluetooth.
This package contains the installation package driver for Ralink/Motorola Bluetooth and high-speed (HS) adapter in the notebook models that are running an operating system supported.
File name: sp55063.exe
Did you install the HP connection manager and try to turn on the bluetooth device using the software?
-
adjustment T61 to boot from the cd drive to install the OS
My problem started with my T61: alert one halfway BSOD windows loading and then progressed slowly data hard drive get completely corrupt and be... Well, to all intents and purposes empty it.
I have a windows XP installation disc and want to start form the disk, to format the hard drive and install a new XP installation.
I can't do that, however, because the BIOS does not allow me to make changes to the boot priority) or anything else.
I turn the computer with the CD inside and all I get is a black screen with an underscore flashing in the upper left corner.
I'm away on vacation right now (and for a month) so I can't have a lenovo support center technology or anything.
Any advice?
Welcome to the forum!
Your BIOS password is locked?
-
Can any1 help me get the bluetooth on an inspiron 1525 running
Any1 can help me get the bluetooth on an inspiron 1525 race I think Norman 2 uninstall the driver and reinstal, but I do not know how to run vista 32 thank you
Hello
________________________________________________
read these tutorials on how to set up bluetooth:
How to set up a Bluetooth connection
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection
Set up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device
__________________________________________________________________
Here are solutions to some common problems with Bluetooth devices.
You can also try a convenience store for diagnose and fix common problems with equipment and devices running.
_____________________________________________________________________
If the above does not correct it contact the manufacturer of the hardware/device
__________________________________________________________________
Here are the drivers for it
and a link to a manul cat it
Maybe you are looking for
-
What are the named files. DS_Store added by OSX for
When you work on my iMac, OS10.6.8, the system adds a techy stuff file in folders with my files named. DS_Store. What are and can I put them in the trash without losing something useful.
-
Tecra M9: What is the "PCI Simple Communications controller"?
Hello I just rolled back a Tecra M9 - 12R (T7300) to XP Pro.I found all the drivers on the site but now I installed all and yet, I get a non recognized "PCI Simple Communications Controller" in Device Manager.I installed the card ethernet and wi - fi
-
How can I save my iPhone if it's not new and I don't want to restore from old session?
So, I've been really bad at backing up my iPhone. I have the iPhone 6 and had essentially when it came out. I backed up the phone right about then (11/10/14). Since then, I've only really imported my photos in iPhoto, but has not actually backed up t
-
I have a vi (written in labview 8.6) that I am trying to run it on another pc; However, after you install the trial version on the other pc and daqmx base, I can't run it. The PDM vi is missing. They are not in the basic version of data acquisition?
-
Halo 2 live will be back