Cannot get the printer driver to install the Satellite Pro C660
tried to install epson rx560 driver printer (windows 7 64-bit) the satellite pro c660 but it fails epson told me to consult a technician because the printer driver is very good
Any help would be welcome
I don t think that it is a mobile phone number.
In my opinion, you should visit and check the Epson support page:
Someone at - he of the drivers from the internet that can run internet on Toshiba Satellite Pro C660? Laptop is preinstalled with Win7 64 bit.
I put t know what the card is inside the laptop. He formerly Atheros, but now his Realtek, was great work until Windows don't update now no link it just says: limited access, even if there are 5 full bars showing, there is a yellow question mark on it.
When I run the troubleshooting it indicates a possible driver problem, but if I check the driver it says working properly. I have been using the system restore and disable windows update, but daily updates are coming back and I have no internet again.
Now the system restore point that I had created that worked went among the dining choices.
My head is paralyzed.
Any help greatly appreciated
Windows updates are listed as important and optional. Under optional drivers are sometimes written drivers for hardware components such as display or WLAN. Please don t install these updates. Install important updates only, and only use the drivers from Toshiba.
Please send us the name of the full model (C660-xxx) and we can check what cards are on the inside.
Try it please check the system again restore and turn on show restore points more. I hope that your restore point will be there. Do it, check the functionality and don t install any driver offered by Microsoft Windows update.
>... Satellite Pro C660-16N - Windows 7 64 bit Home Premium pre-installed...
Nobody knows what the best route is change Win7 64 bit for Win7 32 bit. This model has a 32-bit install on HARD drive recovery option?
Or he will have to do a clean install of Win7 32 bit DVD.
Thank you very much.
I guess that this laptop is available with 64-bit only (specification) and there is only one way to install the version OS 32-bit, you must install it using original Microsoft Win7 32 bit installation disc.
Please note: for the activation of the operating system, you can use the product key from the sticker. You must purchase a new license for your own installation.
By the way: also check if this laptop model is supported for 32-bit version. You can do this on Toshiba support and download page under http://eu.computers.toshiba-europe.com
If you have any other questions you are welcome.
I have a Trojan horse on my Toshiba Satellite Pro C660-21f, I have more available disks to reformat the laptop.
Is there a way that I can do?
You can install recovery image using recovery disk (F8 at startup) facility?
Satellite Pro C660-1RZ
Does anyone know if Firewire can be attached to this model either internally or externally. As my office has finally called it a day I rely on my laptop.
Thank you very much.
According to the specifications of the laptop this model of laptop is not fireweire port.
Generally recently years laptop have firewire port.
Which device you want to connect to your laptop?
G ' Day,.
I have a little problem with my laptop Toshiba Satellite Pro C660.
Unfortunately I had to remove the keyboard and thus dislodged the
fragile plug to connect to the computer.
The 'Shift' key refused to work since. All other keys work as usual.
The only problem is the 'Shift' button does not.
I tried to gently move the plug but made no difference so now have to
Use a USB keyboard.
Can you please help with suggestions for this problem?
Thank you for your time.
See you soon,.
I really put t know what you think when you know that there is no connection for each unique key, but for the entire keyboard.
To be honest I ve changed keyboard several times but never noticed this problem.
Are the two SHIFT keys off function?
I bought laptop Satellite Pro C660 - 2TQ PSC0RE - 01801QGR 2 days ago and found the Fn key does not.
Someone help me to activate it?
Select all programs-> Toshiba-> Flash cards, and then restart this utility.
Now if you press Fn + F8, you should be able to turn on or turn off the WiFi.
The FN + F9 active needs or disable the touchpad.
Support the necessary computer startup.
I have a Satellite Pro A120SE-180. I took out the RAM to check how much I had. Then, I opened the battery compartment without thinking about the consequences. Now I get just a power indicator and that it will not start at all.
I can't open the disk drive or get any life out of it. I was running an upgrade of Vista, which was available as a cheap option when I bought with Windows XP.
What might have happened, is that the operating system and a hard drive can have erased himself when the RAM and battery have been removed at the same time!
The only way to fix and doing things is again to send it to a Toshiba service center and get them to look! Also, do not upgrade to Vista - I'm using XP and it seems to do the job the way it was supposed to! I intend to switch to another Satellite Pro, an A300 running Vista, but I will look for someone who can replace XP on it!
I have trouble displaying to an external source (LCD TV). There is no display when I connect to the TV. When I press Fn + F5 the only option available is the LCD cell phone IE. I checked on the driver settings and there is no option to select the parameters for a secondary/external monitor.
Does anyone know what I need to do so that I can display to an external source?
I use the connection of 15 pins with an adapter to convert video connection - is it ok or should I use the S-video connection on the back of my laptop?
Any help would be appreciated
This TV option does not appear because you have connected the TV to the wrong place.
The TV device must be connected to the laptop s-video port via compatible and s-video cable supported!
Then, you can use FN + F5 to switch the display to the TV set.
Please note: sometimes the s-video channel must be enabled on the TV!
I am completely confused because my keyboard has gone haywire and am pretty annoyed, that I can't fix it
Am running windows 7 on toshiba satellite laptop computer pro and I was wondering if this is a software or hardware problem.
Here's what happens:
-Caps lock light stays no more but it flashes when I press it. It always works well
-Left SHIFT key still works, but when I press on it... it is also creates this symbol ~ at the same time within UK keyboard. If I change U.S. keyboard then it enters the vertical BAR.
-The ~ key above the tab key doesn't do what ¬
- And that the key to the pipe that is above the input Tape button this: #7
I updated the BIOS earlier today, but nothing helps...
Does anyone have an idea on how I can fix this as its quite frustrating! Thanks for all the ideas.
see you soon
Post edited by: asklink
> Am running windows 7 on toshiba satellite laptop computer pro and I was wondering if this is a software or maybe hardware problem.
Keyboard is controlled by a Microsoft driver that is part of the Window System.
So the story is pretty simple either your internal keyboard has failed or the keyboard on the motherboard controller does not work.
How do I know what part is affected?
It is also quite simple, you connect an external USB keyboard.
If you notice the same problems using the external keyboard, the problem is related to the keyboard controller. If you n notice any problems using the USB, the computer keyboard keyboard internal works poorly in this case has to be replaced.
Hi guys, I have a Satellite C660 Pro who has developed a weird problem
When the laptop has been for some time, the mouse pad will start scrolling and horizontal scrolling when I do not want to control the cursor of the mouse almost impossible until I restart, then it works very well for anywhere between 20 minutes and a few hours before it goes nuts new
I tried to update the drivers, I also tried to disable the ability of mouse pad to scroll or do anything other than to be a mouse pad, but this does not seem to have changed anything
any ideas out there?
Have you also tried updating the BIOS?
I need help for my son who is the Satellite Pro C660 1LR laptop.
In this portable hard drive is completely dead, I have not created a disk of recovery for this system of portable computers.
I bought a new hard drive that is installed... However, as you guessed it I have no access to reinstall an OS, this laptop works on windows 7.
I'm not really tech savvy so if someone can advise me please do explain to the fool proof format! I try to avoid having to buy something expensive.
> I'm trying to avoid having to buy something expensive.
Problem is that you don't have many options in this regard.
If you want to have the factory again settings you must install recovery disc. You can order on https://backupmedia.toshiba.eu/landing.aspx of course is not free, but, in my opinion, without a doubt the best solution.
You can buy the Microsoft installation disc and install the clean version. You must purchase a valid license for it.
In this case, you must install all the necessary drivers, tools and utilities for more than one by one.
Just in case you can get this installation of Microsoft and the free license you can save money.
Believe me, the best solution is the original recovery disk command.
Well, Toshiba said the Satellite Pro C660 2DJ is not able to upgrade Windows 10. This time I found statement opposite on other sites and installed it. I'm happy enough, because I use it. Ah there is always a but... the Chicony USB 2 Laptop camera is registered as a device, but with (!) in yellow showing no driver. I found a driver for this device, but under Windows 7 64-bit.
It would be very risky to install an old original driver now that Windows 10 is fine? As a rider to this, I know now there are thousands of people who were sure that their machines would be upgraded to Windows 10 and they are desperate because very little work. Thoughts, anyone?
Win8 Toshiba does not offer driver webcam more as the operating system uses standard Windows driver.
I did not pass my S50 - B Satellite so I do not know if I have an identical problem on my machine.
I'm really interested if another user of the forum has the solution for this.
Original title: new printer
I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer. The printer works fine when printing from a laptop or ipad!
If the web page has not correctly detected your operating system, select it by using the drop-down list. Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.
- Click on the ORB start and go into devices and printers.
- Select (click) the icon of your Epson printer.
- Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar. Click on this button.
- Click the "Drivers" tab on the print server properties dialog box.
- Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
- In the context menu, select "Remove driver and driver package" and click OK
- Click Yes, and then delete
- Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
- Install the driver and the software using the file that you downloaded earlier
At this point, your printer should work fine. However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category
I recently downloaded Windows 8 and now cannot get my printer to print. Tried to print a test page, message says "sent to the printer test page", but it does not print. Can you help me?
You have installed the drivers and software for your printer? Did you go to the printer manufacturer's website to see if they still have 8 available Windows compatible drivers? If the answer is no, then you must do this before all first I try to print.
Maybe you are looking for
I have updated to iOS 9.3 today 8 on my iPhone 5. After the words, I could not activate and couldn't get into the clouds. I managed to activate via iTunes but I can't get cloud to work. I wanted to restore my phone but I can not turn off find my i
Whenever I turn on my computer, a window appears reading: Failed to initialize: 0x800106ba. A problem caused this program service stop. To start the service, restart your computer or search help and Support to find out how to start a service manually
I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4
Hi I'm new and appreciate your patience! I have Xperia Z2 tablet 32 GB to Verizon. What is expandable with a microchip? is there a certain type of microchip, I need, as a mark or? This is new for me to have a tablet. Thank you for the kindness!
I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I tried thi
I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I trie