Get the error when sending data from IOM through SPMLWS

Similar Questions

• Get the error when loading data into the base cube

  Hi all
  
  I get the error by loading the file of hollow data to the database below.
  Please take suggest me...
  
  I use ESSBASE 9.3.1.3.
  
  
  Error:
  
  Basic charge database
  The Xchgrate database management
  Load the database Interntl
  Sample application loaded - connection established
  Start the application [example] with the process id [1688]
  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile
  Unexpected error Essbase 1030010

  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile

  Essbase has problems with spaces (white space characters) the path names (my personal data)

  Rename your path or move the data file to a location that has no characters/spaces in the path name.

• Ask Timedout error when sending data from planning thorugh Smart view

  Hello
  
  We receive Request Timed out error when trying to send data to the planning application by using Smart view.
  
  "Unable to connect to the provider because: the request has timed out." Contact your administrator to increase netRetryCount and netRetryInterval. "Is someone can you please tell me where I can increase the time-out settings? Can someone give me the link to the document that detailed the steps to do this.

  Go to the knowledge base and search for document ID 744559.1

  Cause
  By design, Internet Explorer imposes a time-out for the server limit return data. Internet Explorer does not indefinitely wait for the server to come back with data when the server has a problem.

  Smart View communicates via HTTP to which Internet Explorer DLLs are used. Smart Display users who run large queries or have a slow network connection might encounter the error, "the request has timed out. Contact the administrator to increase NetRetryCount and NetRetryInterval. »

  This error message may be misleading because this error also occurs if Internet timeout settings Explorer does not respond to large farms. By default, Internet Explorer has a value of KeepAliveTimeout to a minute and another factor limiting (ServerInfoTimeout) of two minutes.

  Solution
  Please see the following two Microsoft articles for more information:

  http://support.Microsoft.com/kb/813827
  http://support.Microsoft.com/kb/181050

  The following steps must be made with the help of your systems management group. It is recommended that a backup of the registry is performed before making any changes.

  On the client computer, add/update the following registry keys:

  1. open the registry, Start-> Run-> Regedit.

  2. Locate the following section:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings].

  3. create the new DWORD key with decimal values:

  ReceiveTimeout = 480000

  KeepAliveTimeout = 180000

  ServerInfoTimeout = 180000

  In this example, the ReceiveTimeout setting is 8 minutes. KeepAliveTimeout and ServerInfoTimeout settings are 3 minutes. These values are set to demand longer running more.

  4 restart the machine for the new settings to take effect.

• Received the error when transferring data from the database file

  Hello...
  
  I have my using SOA 10.1.3.1.0. I am trying to transfer the data from the CSV of the oracle database.
  
  The settings of connection in file xml oc4j DBA adapter file in the path C:\product\10.1.3.1\OracleAS_1\j2ee\oc4j_soa\application-deployments\default\DbAdapter is shown below.
  
  < location connector-factory = name of the connector "ist/DB/DBConnection1" = "Adapter database" >
  < config-property name = "xADataSourceName" value = "jdbc/DBConnection1DataSource" / >
  < config-property name = "dataSourceName" value = "loc/DBConnection1DataSource" / >
  < config-property name = "platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/ >
  < config-property name = "usesNativeSequencing" value = "true" / >
  < config-property name = "sequencePreallocationSize" value = "50" / >
  < config-property name = "defaultNChar" value = "false" / >
  < config-property name = "usesBatchWriting" value = "true" / >
  < connection pooling using 'none' = >
  < / connection pooling >
  < use security-config 'none' = >
  < / security-config >
  < / connector-factory >
  
  
  I get the following error:
  
  < name of part = "summary" >
  < Summary >
  file:/C:/product/10.1.3.1/OracleAS_1/BPEL/domains/default/tmp/.bpel_FileToDb_v1.0_188277739ed1e0b720c1fefd0275d1c0.tmp/FileToAdapterService.WSDL [FileToAdapterService_ptt::insert (FiletodbCollection)] - SISM JCA Execute of operation "insert" has no reason to: could not create/access the TopLink Session.
  This session is used to connect to the data store. Caused by: loc/DBConnection1DataSource not found
  ; nested exception is:
  ORABPEL-11622
  Could not create/access the TopLink Session.
  This session is used to connect to the data store. [Caused by: loc/DBConnection1DataSource not found]
  See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Caused by the Exception TOPLINK-7060 (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.ValidationException
  
  Description of the exception: could not acquire data source loc/DBConnection1DataSource
  
  Inner exception: javax.naming.NameNotFoundException: loc/DBConnection1DataSource not found.
  < / Summary >
  < / part >
  
  
  What is the error in the loc/DBConnection1DataSource line? Guys thank you in advance...
  
  
  Thank you...
  
  Published by: userus007 on January 2, 2010 17:16
  
  Published by: userus007 on January 2, 2010 17:18

  Visit similar thread oc4j - RA.xml and data - sources.xml

• Get the error when sending sms. [I think it's a simple fix. but I'm a newbie]

  package com.iphone4life4;
  
  import net.rim.device.api.system.*;
  import javax.microedition.io.*;
  import java.io.*;
  public class App extends Application
  {
       private String addr = "15198887465";
       private String msg = "This is a test message.";
       private DatagramConnection _dc = null;
       private static String _openString = "sms://";
       public static void main(String[] args)
       {
            new App().enterEventDispatcher();
       }
       public App()
       {
            try {
                 _dc = (DatagramConnection)Connector.open(_openString);
                 msg.getBytes();
                 Datagram d = _dc.newDatagram(_dc.getMaximumLength());
                 d.setAddress("//" + addr);
                 _dc.send(d);
            } catch ( IOException e) {}
            System.exit(0);
       }
  }
  

  This is my code and the error I get is the following:

  Thread [SMS2D(319)id=191674368] (Suspended (exception ClassCastException))
      Protocol.makeMessage(DatagramBase) line: 974
      Transport.send(Datagram, DatagramAddressBase, IOProperties, DatagramStatusListener, int) line: 445
      Transport(DatagramTransportBase).superSend(Datagram) line: 299
      Protocol(DatagramConnectionBase).send(Datagram) line: 320
      Protocol.send(Datagram) line: 418
      App.() line: 23
      App.main(String[]) line: 14
  

  Who is wrong?

  Try like this

  new Thread()
  {
     public void run()
     {
        try
        {
           _dc = (DatagramConnection)Connector.open(_openString + addr);
          // msg.getBytes();
           Datagram d = _dc.newDatagram(_dc.getMaximumLength());
        //   d.setAddress("//" + addr);
           d.setData(msg.getBytes(),0,msg.getBytes().length());
           _dc.send(d);
        }
        catch ( IOException e)
        {
        }
     }
  }.start();
  

  To work or not

  Hit as if you got your answer

• Get the error when sending e-mail - windows Mail

  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was 'MY E-MAIL ADDRESS'. ' Subject 'test11', account: ' pop - server.neo.rr.com', server: ' smtp - server.neo.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78

  I have had no problems until the week last now I can't send anything.  I deleted all the old emails in sent, Outbox, deleted files without help.  My email servers and password have not changed over the years?

  Using Vista with Windows Mail

  "Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25...

  Click on Tools > accounts > {account} > properties. On the servers tab, select my server requires authentication. On the Advanced tab, change the port to 587outgoing mail server.

  I have had no problems until the week last now I can't send anything.

  TWC upgrade all their e-mail servers, including those for the accounts of RR. If you still see an error after changing the settings as above, you could be better implemented in a new account with the parameters given on this page: What are my incoming and outgoing mail server addresses? Disable the include this account when receiving mail or synchronizing in the tab general in the Properties dialog of the existing account in the same time. When you have the account of work, you can transfer messages of files from the old account (e.g., sent items) to a new one, and you can then delete the old account.

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• Get the error when switching from table

  
  Hi all

  I'm moving my procedure table values but no luck. your help in this regard will be highly appreciated. Thanks in advance.

  I created the following procedure:

  -------------

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  END;

  ------------------------

  Now, I want to spend all the values of v_dept_no to one of my name of the procedure as rec_coll that receives the value of v_dept_no and print the value against v_dept_no. for example:

  When v_dept_no = 10 then print all empno against deptno 10 and so on...

  I think I have to do something like below but no luck so far.

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  I'm looping 1.v_dept_no

  rec_coll (v_dept_no (i)); - call the rec_coll procedure and pass in the value

  end loop;

  end;

  ---------------

  create another procedure that will receive the value for v_dept_no

  ------------

  CREATE OR REPLACE PROCEDURE rec_coll (v_emp_no c_dept_no) - create collection with c_dept_no type

  IS

  BEGIN

  I'm looping 1.v_emp_no.count

  dbms_output.put_line (v_emp_no (i));

  END loop;

  END;

  -----------

  I get the error message to create these procedures and if someone help me so I really appreciate it. Thank you

  Concerning

  Shu

  I would just write a single SELECT statement joining EMP and Dept. If this exercise is University (collections of learning PL/SQL types), then you can do something like that.

  I used a PACKET to this implementation. Again, this is not how things are done in the real world.

  SQL > create or replace package coll_pkg
  2 as
  3 type dept_no_tbl is table of the dept.deptno%type;
  4
  5 procedure rec_coll (p_dept_no in dept_no_tbl);
  6 procedure send_coll;
  7 end;
  8.

  Package created.

  SQL > show err
  No errors.

  SQL > create or replace package body coll_pkg
  2 as
  3 procedure rec_coll (p_dept_no in dept_no_tbl)
  4 is
  5. start
  6 because me in 1.p_dept_no.count
  7 loop
  8 d in)
  9 select empno, ename
  10 of PEM
  11 where deptno = p_dept_no (i)
  12                 )
  loop 13
  14 dbms_output.put_line (p_dept_no (i) |) ':' || j.EmpNo | ':' || j.ename);
  15 end loop;
  16 end loop;
  end 17;
  18
  procedure send_coll 19
  20 is
  21 l_dept_no dept_no_tbl: = dept_no_tbl();
  start at 22
  23 deptno select bulk collect into l_dept_no
  24 of the Department;
  25
  26 rec_coll (l_dept_no);
  27 end;
  28 end;
  29.

  Package body created.

  SQL > show err
  No errors.

  SQL > set serveroutput on
  SQL > exec coll_pkg.send_coll
  10:7782:CLARK
  10:7839:KING
  20:7369:SMITH
  20:7566:JONES
  20:7788:SCOTT
  20:7876:ADAMS
  30:7499:ALLEN
  30:7521:WARD
  30:7654:MARTIN
  30:7698:BLAKE
  30:7844:TURNER

  PL/SQL procedure successfully completed.

  SQL >

• Get the error while loading data

  Hello
  
  I get an error when loading the data in the database demo Application based on Essbase 11.1.1.3. I used the format during the loading of the data below
  'Stereo"-Tab-"Boston"-Tab-"Actual"-Tab-"Jan"-Tab-"Sales"-Tab-"100 '.
  But when I try to open this text file in the rule file it said - empty character in the name. No idea what's wrong I do.
  
  The hierarchy of the Demo.Basic database as below:
  Year
  -T1
  -Jan
  Market
  -East
  -Boston
  Product
  -Audio
  -Stereo
  Account
  -Profit
  -Margin
  -Sales
  Scenerio
  -Real
  
  Thank you

  Where is saved the file? I believe that this is the error message you get if you save the files in a folder such as My Documents, in which you will notice a space between my and Documents. Try to save your file in a directory where there is no space such as C:\Hyperion.

  See you soon,.
  Mehmet

• Get the error when you attempt to cancel the shipment of Release 11i

  
  Hi all

  I get the error while I am trying to cancel the amount open against relase expedition with multiple (4) below the distribution lines.

  Send # 2 # 3 quantity invoiced greater than the quantity shipped 2205 88181 Distribution

  Scenario-

  For shipment of release # 2 -

  Quantity ordered - 8820

  Due Qty-2

  Received Qty - 8818

  Qty. to beak - 8818

  Press release # 2 is to have 4 lines of distributions. Against distribution, line 1, 2 and 3 of the delivered quantity is 2205 while distribution on line 4, deilvered qty is 2203.

  But the quantity invoiced is 8818, only line 3 distibution and against the other lineages invoiced quantity is 0.

  Please let me know what to do now in order to cancel (the relase open expedition 2) amount in this case.

  Good reply as soon as POSSIBLE.

  Hi all

  It is not possible ancel relase shipping open quantity (2) in this case in the support environment.

  It is better for finally closed the expeditions of this release.

  But it is worth noting that finally close or cancel actions are intended to prevent additional changes to the purchase order. This includes invoice or receipt.

  This cannot be undone.

  Kind regards

  Piyush

• get the error when apex.war is deployed on several managed server

  Hi all

  I sent apex.war on several managed server on server 11g webloigc

  his work on a single server managed not on others and I m having 3 servers managed as it

  http://ipaddress:7003

  http://ipaddress:7004

  http://ipaddress:7005

  and I m having infront of weblogic server that the server apache web http://IPAddress:80 / app_name

  I m getting this error when I'm trying to access the application of apex

  The environment can be locked to a single Editor access. ENV_LOCKED: The je.lck file could not be locked. Environment is not valid and must be closed.

  
  

  Please guide me how to configure it on several WLS managed server with the server web apache.
  

  
  

  Thanks and greetings

  Shadab akram khan
  

  solved by myself

• get the error when starting weblogic server in jdeveloper

  get an error when you start weblogic server in jdeveloper

  The NEWSPAPER (its sequel shows):

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  The user ' directors [weblogic, directors] =' the role of the administration. All jobs by administrators must go through an Administration Port.

  Authentication failure connecting to the IntegratedWebLogicServer application server. Please check the settings.

  Cannot complete the commissioning of the IntegratedWebLogicServer application server.

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  [End of forcing of IntegratedWebLogicServer]

  Taskkill /F/PID 1620

  Process is complete.

  PLs help me

  User, please tell us your jdev version!

  Somehow your credentials are corrupted. Two possible solution:

  (1) open your folder, system11.1.1.xxxx open the DefaultDomain\servers\DefaultServer\security folder and edit the boot.properties file. Delete the part '(AES)... ". «"after the username and password and write the new example of username = weblogic", password = "Welcome1" Save the file and try to restart the integrated server. Once the server starts the entries are encoded again.

  (2) If 1) doesn't work, remove all of the DefaultDomain file and create a new instance of WLS in jdev.

  Timo