Get the error when sending sms. [I think it's a simple fix. but I'm a newbie]

Similar Questions

• Get the error when sending e-mail - windows Mail

  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was 'MY E-MAIL ADDRESS'. ' Subject 'test11', account: ' pop - server.neo.rr.com', server: ' smtp - server.neo.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78

  I have had no problems until the week last now I can't send anything.  I deleted all the old emails in sent, Outbox, deleted files without help.  My email servers and password have not changed over the years?

  Using Vista with Windows Mail

  "Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25...

  Click on Tools > accounts > {account} > properties. On the servers tab, select my server requires authentication. On the Advanced tab, change the port to 587outgoing mail server.

  I have had no problems until the week last now I can't send anything.

  TWC upgrade all their e-mail servers, including those for the accounts of RR. If you still see an error after changing the settings as above, you could be better implemented in a new account with the parameters given on this page: What are my incoming and outgoing mail server addresses? Disable the include this account when receiving mail or synchronizing in the tab general in the Properties dialog of the existing account in the same time. When you have the account of work, you can transfer messages of files from the old account (e.g., sent items) to a new one, and you can then delete the old account.

• Get the error when sending data from IOM through SPMLWS

  [11/12/10 4:12:29:834 EST] 00000040 SystemOut O ERROR, November 12, 2010 04:12:29, 830, [XELLERATE. ACCOUNTMANAGEMENT], class/method: tcUtilityFactory/getPropertyValue some problems: cannot load the class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  java.lang.ClassCastException: unable to load class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  at com.ibm.rmi.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:372)
  at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:137)
  at com.thortech.xl.ejb.interfaces.tcUnauthenticatedOperationsUtil.lookupHome (unknown Source)
  at com.thortech.xl.ejb.interfaces.tcUnauthenticatedOperationsUtil.getHome (unknown Source)
  at Thor.API.tcUtilityFactory.getUnauthenticatedOperations (unknown Source)
  at Thor.API.tcUtilityFactory.getPropertyValue (unknown Source)
  to Thor.API.tcUtilityFactory. < init >(Unknown Source)
  to com.oracle.xl.spmlws.oim.eventhandler.OIMCallFactory. < init >(Unknown Source)
  at com.oracle.xl.spmlws.framework.eventhandler.OIMEventHandler.handleRequest (unknown Source)
  at com.oracle.xl.spmlws.framework.event.EventMediator.executeEventHandlerSequence (unknown Source)
  at com.oracle.xl.spmlws.framework.event.EventMediator.processEvent (unknown Source)
  at com.oracle.xl.spmlws.framework.engine.Engine.process (unknown Source)
  at com.oracle.xl.spmlws.framework.engine.Engine.provision (unknown Source)
  at com.oracle.xl.spmlws.ws.server.websphere.HttpSoap11BindingImpl.processRequest (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeMethod(JavaDispatcher.java:178)
  at com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeOperation(JavaDispatcher.java:141)
  at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processRequestResponse(SoapRPCProcessor.java:453)
  at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processMessage(SoapRPCProcessor.java:414)
  at com.ibm.ws.webservices.engine.dispatchers.BasicDispatcher.processMessage(BasicDispatcher.java:134)
  at com.ibm.ws.webservices.engine.dispatchers.java.SessionDispatcher.invoke(SessionDispatcher.java:204)
  at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:228)
  at com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCHandler.invoke(JAXRPCHandler.java:152)
  at com.ibm.ws.webservices.engine.handlers.WrappedHandler.invoke(WrappedHandler.java:64)
  at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:228)
  at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:228)
  at com.ibm.ws.webservices.engine.WebServicesEngine.invoke(WebServicesEngine.java:336)
  at com.ibm.ws.webservices.engine.transport.http.WebServicesServlet.doPost(WebServicesServlet.java:831)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
  at com.ibm.ws.webservices.engine.transport.http.WebServicesServletBase.service(WebServicesServletBase.java:341)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1075)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:550)
  at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
  at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3391)
  at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:267)
  at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811)
  at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1455)
  at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:115)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:267)
  at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
  at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
  at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:556)
  at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:606)
  at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:979)
  to com.ibm.ws.tcp.channel.impl.WorkQueueManager$ Worker.run (WorkQueueManager.java:1064)
  to com.ibm.ws.util.ThreadPool$ Worker.run (ThreadPool.java:1473)
  [11/12/10 4:12:29:857 EST] 00000040 SystemOut O ERROR, November 12, 2010 04:12:29, 856, [SPMLWS. ENGINE], commissioning has failed
  [11/12/10 4:12:29:863 EST] 00000040 SystemOut O ERROR, November 12, 2010 04:12:29, 857, [EXCEPTION when the TREATMENT USEFUL load], SPMLWS. Utility
  com.oracle.xl.spmlws.framework.engine.EngineException: com.oracle.xl.spmlws.framework.engine.EngineException: com.oracle.xl.spmlws.framework.event.EventException: com.oracle.xl.spmlws.framework.event.EventException: com.oracle.xl.spmlws.oim.eventhandler.OIMEventException: Thor.API.Exceptions.tcAPIException: cannot load the class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  at com.oracle.xl.spmlws.framework.engine.Engine.provision (unknown Source)
  at com.oracle.xl.spmlws.ws.server.websphere.HttpSoap11BindingImpl.processRequest (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeMethod(JavaDispatcher.java:178)
  at com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeOperation(JavaDispatcher.java:141)
  at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processRequestResponse(SoapRPCProcessor.java:453)
  at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processMessage(SoapRPCProcessor.java:414)
  at com.ibm.ws.webservices.engine.dispatchers.BasicDispatcher.processMessage(BasicDispatcher.java:134)
  at com.ibm.ws.webservices.engine.dispatchers.java.SessionDispatcher.invoke(SessionDispatcher.java:204)
  at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:228)
  at com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCHandler.invoke(JAXRPCHandler.java:152)
  at com.ibm.ws.webservices.engine.handlers.WrappedHandler.invoke(WrappedHandler.java:64)
  at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:228)
  at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:228)
  at com.ibm.ws.webservices.engine.WebServicesEngine.invoke(WebServicesEngine.java:336)
  at com.ibm.ws.webservices.engine.transport.http.WebServicesServlet.doPost(WebServicesServlet.java:831)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
  at com.ibm.ws.webservices.engine.transport.http.WebServicesServletBase.service(WebServicesServletBase.java:341)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1075)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:550)
  at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
  at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3391)
  at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:267)
  at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811)
  at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1455)
  at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:115)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:267)
  at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
  at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
  at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:556)
  at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:606)
  at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:979)
  to com.ibm.ws.tcp.channel.impl.WorkQueueManager$ Worker.run (WorkQueueManager.java:1064)
  to com.ibm.ws.util.ThreadPool$ Worker.run (ThreadPool.java:1473)
  Caused by: com.oracle.xl.spmlws.framework.engine.EngineException: com.oracle.xl.spmlws.framework.event.EventException: com.oracle.xl.spmlws.framework.event.EventException: com.oracle.xl.spmlws.oim.eventhandler.OIMEventException: Thor.API.Exceptions.tcAPIException: cannot load the class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  at com.oracle.xl.spmlws.framework.engine.Engine.process (unknown Source)
  ... more than 40
  Caused by: com.oracle.xl.spmlws.framework.event.EventException: com.oracle.xl.spmlws.framework.event.EventException: com.oracle.xl.spmlws.oim.eventhandler.OIMEventException: Thor.API.Exceptions.tcAPIException: cannot load the class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  at com.oracle.xl.spmlws.framework.event.EventMediator.processEvent (unknown Source)
  ... more than 41
  Caused by: com.oracle.xl.spmlws.framework.event.EventException: com.oracle.xl.spmlws.oim.eventhandler.OIMEventException: Thor.API.Exceptions.tcAPIException: cannot load the class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  at com.oracle.xl.spmlws.framework.eventhandler.OIMEventHandler.handleRequest (unknown Source)
  at com.oracle.xl.spmlws.framework.event.EventMediator.executeEventHandlerSequence (unknown Source)
  ... more than 42
  Caused by: com.oracle.xl.spmlws.oim.eventhandler.OIMEventException: Thor.API.Exceptions.tcAPIException: cannot load the class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  to com.oracle.xl.spmlws.oim.eventhandler.OIMCallFactory. < init >(Unknown Source)
  ... more than 44
  Caused by: Thor.API.Exceptions.tcAPIException: could not load class: com.thortech.xl.ejb.interfaces._tcUnauthenticatedOperationsHome_Stub
  at Thor.API.tcUtilityFactory.getPropertyValue (unknown Source)
  to Thor.API.tcUtilityFactory. < init >(Unknown Source)
  ... more than 45
  [11/12/10 4:12:29:918 EST] 00000040 SystemOut O DEBUG, November 12, 2010 04:12:29, 917, [WEBSERVICE METHOD PROCESSREQUEST ENDS], SPMLWS. Utility

  810444 wrote:
  Hello

  It's useful link: http://download.oracle.com/docs/cd/E10391_01/doc.910/e10366/spml.htm#sthref96

  Thank you
  Gyanprakash

  Thank you. I have read this document, but an upside allows external application change passwords, recover and so on.

  Best regards
  Jorge

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  Restart the computer and try again.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  Look herehttp://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/when-i-access-internet-explorer-a-message-says/25bef4a4-bb01-46ac-bc68-11c81e7b55e7

• get the error code 66A message, what to do and how to fix it?

  get the error code 66A message, what to do and how to fix it?

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Get the error when switching from table

  
  Hi all

  I'm moving my procedure table values but no luck. your help in this regard will be highly appreciated. Thanks in advance.

  I created the following procedure:

  -------------

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  END;

  ------------------------

  Now, I want to spend all the values of v_dept_no to one of my name of the procedure as rec_coll that receives the value of v_dept_no and print the value against v_dept_no. for example:

  When v_dept_no = 10 then print all empno against deptno 10 and so on...

  I think I have to do something like below but no luck so far.

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  I'm looping 1.v_dept_no

  rec_coll (v_dept_no (i)); - call the rec_coll procedure and pass in the value

  end loop;

  end;

  ---------------

  create another procedure that will receive the value for v_dept_no

  ------------

  CREATE OR REPLACE PROCEDURE rec_coll (v_emp_no c_dept_no) - create collection with c_dept_no type

  IS

  BEGIN

  I'm looping 1.v_emp_no.count

  dbms_output.put_line (v_emp_no (i));

  END loop;

  END;

  -----------

  I get the error message to create these procedures and if someone help me so I really appreciate it. Thank you

  Concerning

  Shu

  I would just write a single SELECT statement joining EMP and Dept. If this exercise is University (collections of learning PL/SQL types), then you can do something like that.

  I used a PACKET to this implementation. Again, this is not how things are done in the real world.

  SQL > create or replace package coll_pkg
  2 as
  3 type dept_no_tbl is table of the dept.deptno%type;
  4
  5 procedure rec_coll (p_dept_no in dept_no_tbl);
  6 procedure send_coll;
  7 end;
  8.

  Package created.

  SQL > show err
  No errors.

  SQL > create or replace package body coll_pkg
  2 as
  3 procedure rec_coll (p_dept_no in dept_no_tbl)
  4 is
  5. start
  6 because me in 1.p_dept_no.count
  7 loop
  8 d in)
  9 select empno, ename
  10 of PEM
  11 where deptno = p_dept_no (i)
  12                 )
  loop 13
  14 dbms_output.put_line (p_dept_no (i) |) ':' || j.EmpNo | ':' || j.ename);
  15 end loop;
  16 end loop;
  end 17;
  18
  procedure send_coll 19
  20 is
  21 l_dept_no dept_no_tbl: = dept_no_tbl();
  start at 22
  23 deptno select bulk collect into l_dept_no
  24 of the Department;
  25
  26 rec_coll (l_dept_no);
  27 end;
  28 end;
  29.

  Package body created.

  SQL > show err
  No errors.

  SQL > set serveroutput on
  SQL > exec coll_pkg.send_coll
  10:7782:CLARK
  10:7839:KING
  20:7369:SMITH
  20:7566:JONES
  20:7788:SCOTT
  20:7876:ADAMS
  30:7499:ALLEN
  30:7521:WARD
  30:7654:MARTIN
  30:7698:BLAKE
  30:7844:TURNER

  PL/SQL procedure successfully completed.

  SQL >

• Get the error when you attempt to cancel the shipment of Release 11i

  
  Hi all

  I get the error while I am trying to cancel the amount open against relase expedition with multiple (4) below the distribution lines.

  Send # 2 # 3 quantity invoiced greater than the quantity shipped 2205 88181 Distribution

  Scenario-

  For shipment of release # 2 -

  Quantity ordered - 8820

  Due Qty-2

  Received Qty - 8818

  Qty. to beak - 8818

  Press release # 2 is to have 4 lines of distributions. Against distribution, line 1, 2 and 3 of the delivered quantity is 2205 while distribution on line 4, deilvered qty is 2203.

  But the quantity invoiced is 8818, only line 3 distibution and against the other lineages invoiced quantity is 0.

  Please let me know what to do now in order to cancel (the relase open expedition 2) amount in this case.

  Good reply as soon as POSSIBLE.

  Hi all

  It is not possible ancel relase shipping open quantity (2) in this case in the support environment.

  It is better for finally closed the expeditions of this release.

  But it is worth noting that finally close or cancel actions are intended to prevent additional changes to the purchase order. This includes invoice or receipt.

  This cannot be undone.

  Kind regards

  Piyush

• get the error when apex.war is deployed on several managed server

  Hi all

  I sent apex.war on several managed server on server 11g webloigc

  his work on a single server managed not on others and I m having 3 servers managed as it

  http://ipaddress:7003

  http://ipaddress:7004

  http://ipaddress:7005

  and I m having infront of weblogic server that the server apache web http://IPAddress:80 / app_name

  I m getting this error when I'm trying to access the application of apex

  The environment can be locked to a single Editor access. ENV_LOCKED: The je.lck file could not be locked. Environment is not valid and must be closed.

  
  

  Please guide me how to configure it on several WLS managed server with the server web apache.
  

  
  

  Thanks and greetings

  Shadab akram khan
  

  solved by myself

• get the error when starting weblogic server in jdeveloper

  get an error when you start weblogic server in jdeveloper

  The NEWSPAPER (its sequel shows):

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  The user ' directors [weblogic, directors] =' the role of the administration. All jobs by administrators must go through an Administration Port.

  Authentication failure connecting to the IntegratedWebLogicServer application server. Please check the settings.

  Cannot complete the commissioning of the IntegratedWebLogicServer application server.

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  [End of forcing of IntegratedWebLogicServer]

  Taskkill /F/PID 1620

  Process is complete.

  PLs help me

  User, please tell us your jdev version!

  Somehow your credentials are corrupted. Two possible solution:

  (1) open your folder, system11.1.1.xxxx open the DefaultDomain\servers\DefaultServer\security folder and edit the boot.properties file. Delete the part '(AES)... ". «"after the username and password and write the new example of username = weblogic", password = "Welcome1" Save the file and try to restart the integrated server. Once the server starts the entries are encoded again.

  (2) If 1) doesn't work, remove all of the DefaultDomain file and create a new instance of WLS in jdev.

  Timo

• Get the error when saving files, afterSave '_afterSave.htm' is not defined

  Recently I updated my Windows Pro 8.1 for Windows 10 operating system, and then I started to work, using Dreamweaver, but all save, example CRL + S I get the error above, anyone else who has this problem and managed?

  Have a look here http://www.dmxzone.com/forum/topic/32899/