Get the error when using odiRef.getPop ("POP_NAME")

Similar Questions

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• Get the error when using remove child

  Hi try to use remove the child I get the following error in the output panel

  Hide videos and learn the buttons
  video removed
  ArgumentError: Error #2025: the supplied DisplayObject must be a child of the caller.
  at flash.display::DisplayObjectContainer/removeChild()
  at DSE_MAIN_dizzy3_fla::MainTimeline/removeMedia()
  at DSE_MAIN_dizzy3_fla::MainTimeline/setNewMedia()
  at DSE_MAIN_dizzy3_fla::MainTimeline/onIntroClick()

  I think that the function that generated the error is called removeMedia()

  This function is called from another function that is called by a buttonpress

  function removeMedia() {}
  If (myVideo! = null) {//Check that a video is on the scene
  myVideo.stop (); / / stop the video so don't continue to play sound
  this.removeChild (myVideo); / / deletion of the video being step
  trace ("video deleted");
  }
  If (myLearn! = null) {//Check that an element of learning is on stage
  removeChild (myLearn); / / Remove swf of the stadium's current learning
  trace ("learning removed swf");
  }
  }

  I tried to parent.removeChild (myVideo);

  and parent.removeChild (myVideo);

  but I got the same error

  Don't know how to fix it or why? its probably something simple I'm missing, any help would be appreciated

  Heres the code in its entirety if you need

  
  / / Code witten by [email protected]

  Stop(); / / Stop to this framework

  Add the Classes required for the application-
  import fl.containers.UILoader;// import uiLoader class to display the elements of learning
  import flash.display.LoaderInfo;// import (required to load flash Vars) class loaderInfo
  import import the FLVPlayback class fl.video.*;// (required for playback of flv)
  FlashVars are passed to this application since the html/php page
  myFolder is the name of the FlashVar and contains the path to the flv file
  and learning of the swf file

  
  Configure the application variables-
  var mySection:String; / / define a variable to hold the current section, we
  MySection = "intro"; / / because it is the first picture on the variable intro MySection
  var myFlv:String; / / define a variable to hold the name of the current flv to play
  myFlv = "loaded dse_introvideo.flv";// like this just to put the variable myFlv for intro.flv.
  var mySwf:String; / / define a variable to hold the name of the element of swf of learning to play
  no need to name mySwf yet as we are in the intro of the article
  var mySecType:String; / / set a variable to contain the type of section 'video' or 'learning '.
  mySecType = 'video '; / / We start playing the videos in order to define us the type of section to the video

  // VIDEO STUFF --------------------------------------------------------------------
  var myVideo:FLVPlayback = new FLVPlayback(); / / create a new FLVPlayback object to contain the video
  myVideo.width = 544;             Set the width of the video
  myVideo.height = 304;           adjust the height of the video
  myVideo.x = 200;                  set the horizontal position of the video
  myVideo.y = 88;                    set the vertical position of the video
  set the skin to control videos
  We read the variable called myFolder that is passed to us from the web page
  my file contains path information to the customers on the Web site directory
  If (this.loaderInfo.parameters.myFolder! = undefined) {/ / check if all flashvars passed through}
  If flashvars adopted include myFolder the path to the external file of the skin
  myVideo.skin = (this.loaderInfo.parameters.myFolder + "SkinUnderPlayStopSeekMuteVol.swf");
  } else {}
  If no flashvars are passed through the skin without the additional path value
  myVideo.skin = "SkinUnderPlayStopSeekMuteVol.swf";
  }
  myVideo.source = myFlv; / / set the video source to the current video stored in the variable myFlv
  addChild (myVideo); / / put the video on the stage
  // END VIDEO STUFF-----------------------------------------------------------------

  // LEARNING STUFF ---------------------------------------------------------------
  var myLearn:UILoader = new UILoader(); / / create a new UIloader to contain the element learing
  myLearn.width = 544;                          Set the width of the element of learning
  myLearn.height = 304;                         define learning points height
  myLearn.x = 200;                              set the horizontal position of the element of learning
  myLearn.y = 88;                              set the vertical position of the element of learning

  We need hide the video and the buttons of learning that they must not be shown again
  This function called viewButtons that will
  to call the function, we use viewButtons ("show"); to show them
  and viewButtons ("hide"); to hide
  function viewButtons(mySwitch:String) {}
  If (mySwitch == 'view') {}
  This.vid_btn. Visible = true;                              show the button of the vid
  This.learn_btn. Visible = true;                              See him learn button
  This.button_bkg. Visible = true;                         show the button background
  trace ("see the video and discover the buttons");          hide the button background
  }
  If (mySwitch == 'Hide') {}
  This.vid_btn. Visible = false;               Hide button vid
  This.learn_btn. Visible = false;               Learn how to hide the button
  background of the This.button_bkg button. Visible = false //hide
  trace ("Hide videos and learn the buttons");
  }
  }
  viewButtons ("hide");               turn the video and learning off because buttons are not necessary
  //END LEARNING STUFF------------------------------------------------------------

  MEDIA FUNCTIONS
  function to delete the current item of the scene.
  function removeMedia() {}
  If (myVideo! = null) {//Check that a video is on the scene
  myVideo.stop ();                    stop the video so don't continue to play sound
  this.removeChild (myVideo);     delete the video being step
  trace ("video deleted");
  }
  If (myLearn! = null) {//Check that an element of learning is on stage
  removeChild (myLearn);               Remove swf of the stadium's current learning
  trace ("learning removed swf");
  }
  }

  function setNewMedia() {/ / function to play the swf or flv files media}
  removeMedia (); call the function removeMedia to stop and remove no matter what media on the scene
  If (mySecType == "video") {//if we're in the video section
  myVideo.source = myFlv;               load and play the new video
  addChild (myVideo);                    put video on stage
  trace ("added videos");
  }
  If (mySecType == "learn") {//if we're in the learning section
  myLearn.source = mySwf;               Load point learning
  addChild (myLearn);                    the point of learning on stage
  trace ("added learning item");
  }
  }

  SET UP THE BUTTONS ON THE STAGE-
  INTRO BUTTON
  function onIntroClick(event:MouseEvent):void {}
  myFlv = "dse_introVideo.flv";                    put the video to load
  viewButtons ("hide");                         hide the video and learning buttons
  setNewMedia();                              load in the media
  }
  set the function to the button intro
  intro_btn.addEventListener (MouseEvent.CLICK, onIntroClick);

  
  VIDEO BUTTON
  function onVideoClick(event:MouseEvent):void {}
  mySecType = 'video ';                    section under video
  setNewMedia();                              load in the media
  }
  set the function to the button intro
  vid_btn.addEventListener (MouseEvent.CLICK, onVideoClick);

  
  TEACH BUTTON
  function onLearnClick(event:MouseEvent):void {}
  mySecType = "learn."
  setNewMedia(); / / load in the media
  }
  set the function to the learn button
  learn_btn.addEventListener (MouseEvent.CLICK, onLearnClick);

  
  COMPUTER BUTTON
  function onComputerClick(event:MouseEvent):void {}
  myFlv = "dse_computerVideo.flv";//set the video to load.
  viewButtons ("show"); show the video buttons and learning
  setNewMedia(); / / load in the media

  }
  set the function to the computer button
  computer_btn.addEventListener (MouseEvent.CLICK, onComputerClick);

  BUTTON OF POSTURE
  function onPostureClick(event:MouseEvent):void {}
  myFlv="dse_postureVideo.flv";//set the video to load
  viewButtons ("show"); show the video buttons and learning
  setNewMedia(); / / load in the media
  }

  posture_btn.addEventListener (MouseEvent.CLICK, onPostureClick);

  Ah, looked carefully at the code, and I think I found the problem.

  You call removeChild for BOTH myVideo and myLearn - when the only one of them is on the display list.

  The if() statement could catch it, BUT you check if they are null, not if they are on the display list.  An object can be non-null and not be on the display list.

  The simplest method (also somewhat sloppy method) to get rid of this would be to add a try/catch around two of these calls removeChild.

  try {}

  removeChild (myVideo);

  } catch (e) {}

  try {}

  removeChild (myLearn);

  } catch (e) {}

  It's messy, it triggers the error again, but it immediately masks because you caught and did nothing, but the error is no longer displayed.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• Get the error when switching from table

  
  Hi all

  I'm moving my procedure table values but no luck. your help in this regard will be highly appreciated. Thanks in advance.

  I created the following procedure:

  -------------

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  END;

  ------------------------

  Now, I want to spend all the values of v_dept_no to one of my name of the procedure as rec_coll that receives the value of v_dept_no and print the value against v_dept_no. for example:

  When v_dept_no = 10 then print all empno against deptno 10 and so on...

  I think I have to do something like below but no luck so far.

  CREATE OR REPLACE PROCEDURE send_coll

  IS

  TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;

  v_dept_no c_dept_no: = c_dept_no();

  BEGIN

  SELECT DeptNo

  TO COLLECT FEES IN BULK

  IN v_dept_no

  EMP;

  I'm looping 1.v_dept_no

  rec_coll (v_dept_no (i)); - call the rec_coll procedure and pass in the value

  end loop;

  end;

  ---------------

  create another procedure that will receive the value for v_dept_no

  ------------

  CREATE OR REPLACE PROCEDURE rec_coll (v_emp_no c_dept_no) - create collection with c_dept_no type

  IS

  BEGIN

  I'm looping 1.v_emp_no.count

  dbms_output.put_line (v_emp_no (i));

  END loop;

  END;

  -----------

  I get the error message to create these procedures and if someone help me so I really appreciate it. Thank you

  Concerning

  Shu

  I would just write a single SELECT statement joining EMP and Dept. If this exercise is University (collections of learning PL/SQL types), then you can do something like that.

  I used a PACKET to this implementation. Again, this is not how things are done in the real world.

  SQL > create or replace package coll_pkg
  2 as
  3 type dept_no_tbl is table of the dept.deptno%type;
  4
  5 procedure rec_coll (p_dept_no in dept_no_tbl);
  6 procedure send_coll;
  7 end;
  8.

  Package created.

  SQL > show err
  No errors.

  SQL > create or replace package body coll_pkg
  2 as
  3 procedure rec_coll (p_dept_no in dept_no_tbl)
  4 is
  5. start
  6 because me in 1.p_dept_no.count
  7 loop
  8 d in)
  9 select empno, ename
  10 of PEM
  11 where deptno = p_dept_no (i)
  12                 )
  loop 13
  14 dbms_output.put_line (p_dept_no (i) |) ':' || j.EmpNo | ':' || j.ename);
  15 end loop;
  16 end loop;
  end 17;
  18
  procedure send_coll 19
  20 is
  21 l_dept_no dept_no_tbl: = dept_no_tbl();
  start at 22
  23 deptno select bulk collect into l_dept_no
  24 of the Department;
  25
  26 rec_coll (l_dept_no);
  27 end;
  28 end;
  29.

  Package body created.

  SQL > show err
  No errors.

  SQL > set serveroutput on
  SQL > exec coll_pkg.send_coll
  10:7782:CLARK
  10:7839:KING
  20:7369:SMITH
  20:7566:JONES
  20:7788:SCOTT
  20:7876:ADAMS
  30:7499:ALLEN
  30:7521:WARD
  30:7654:MARTIN
  30:7698:BLAKE
  30:7844:TURNER

  PL/SQL procedure successfully completed.

  SQL >

• Get the error when saving files, afterSave '_afterSave.htm' is not defined

  Recently I updated my Windows Pro 8.1 for Windows 10 operating system, and then I started to work, using Dreamweaver, but all save, example CRL + S I get the error above, anyone else who has this problem and managed?

  Have a look here http://www.dmxzone.com/forum/topic/32899/

• get the error when apex.war is deployed on several managed server

  Hi all

  I sent apex.war on several managed server on server 11g webloigc

  his work on a single server managed not on others and I m having 3 servers managed as it

  http://ipaddress:7003

  http://ipaddress:7004

  http://ipaddress:7005

  and I m having infront of weblogic server that the server apache web http://IPAddress:80 / app_name

  I m getting this error when I'm trying to access the application of apex

  The environment can be locked to a single Editor access. ENV_LOCKED: The je.lck file could not be locked. Environment is not valid and must be closed.

  
  

  Please guide me how to configure it on several WLS managed server with the server web apache.
  

  
  

  Thanks and greetings

  Shadab akram khan
  

  solved by myself

• get the error when starting weblogic server in jdeveloper

  get an error when you start weblogic server in jdeveloper

  The NEWSPAPER (its sequel shows):

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

  < 25 July 2013 19:19:15 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  The user ' directors [weblogic, directors] =' the role of the administration. All jobs by administrators must go through an Administration Port.

  Authentication failure connecting to the IntegratedWebLogicServer application server. Please check the settings.

  Cannot complete the commissioning of the IntegratedWebLogicServer application server.

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  [End of forcing of IntegratedWebLogicServer]

  Taskkill /F/PID 1620

  Process is complete.

  PLs help me

  User, please tell us your jdev version!

  Somehow your credentials are corrupted. Two possible solution:

  (1) open your folder, system11.1.1.xxxx open the DefaultDomain\servers\DefaultServer\security folder and edit the boot.properties file. Delete the part '(AES)... ". «"after the username and password and write the new example of username = weblogic", password = "Welcome1" Save the file and try to restart the integrated server. Once the server starts the entries are encoded again.

  (2) If 1) doesn't work, remove all of the DefaultDomain file and create a new instance of WLS in jdev.

  Timo

• Get the error when loading data into the base cube

  Hi all
  
  I get the error by loading the file of hollow data to the database below.
  Please take suggest me...
  
  I use ESSBASE 9.3.1.3.
  
  
  Error:
  
  Basic charge database
  The Xchgrate database management
  Load the database Interntl
  Sample application loaded - connection established
  Start the application [example] with the process id [1688]
  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile
  Unexpected error Essbase 1030010

  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile

  Essbase has problems with spaces (white space characters) the path names (my personal data)

  Rename your path or move the data file to a location that has no characters/spaces in the path name.

• Get the error when you attempt to cancel the shipment of Release 11i

  
  Hi all

  I get the error while I am trying to cancel the amount open against relase expedition with multiple (4) below the distribution lines.

  Send # 2 # 3 quantity invoiced greater than the quantity shipped 2205 88181 Distribution

  Scenario-

  For shipment of release # 2 -

  Quantity ordered - 8820

  Due Qty-2

  Received Qty - 8818

  Qty. to beak - 8818

  Press release # 2 is to have 4 lines of distributions. Against distribution, line 1, 2 and 3 of the delivered quantity is 2205 while distribution on line 4, deilvered qty is 2203.

  But the quantity invoiced is 8818, only line 3 distibution and against the other lineages invoiced quantity is 0.

  Please let me know what to do now in order to cancel (the relase open expedition 2) amount in this case.

  Good reply as soon as POSSIBLE.

  Hi all

  It is not possible ancel relase shipping open quantity (2) in this case in the support environment.

  It is better for finally closed the expeditions of this release.

  But it is worth noting that finally close or cancel actions are intended to prevent additional changes to the purchase order. This includes invoice or receipt.

  This cannot be undone.

  Kind regards

  Piyush

• Get the error when running rcu.bat

  Hi all

  After a successful installation on ODI 12 c.

  I am trying to run the rcu.bat but I get the error below.

  "Cannot find the javaw.exe.

  just me to get rid of this error.

  Thanks in advance

  Kind regards

  Fabien Manirao

  HI Vivek,

  JAVA_HOME is a regular path whenever we install JDK in our machine and if it does not support other tools.

  ODI_JAVA_HOME we define as the JDK path even as ODI motor needed Java and backgrond processes for studio ODI

  Kind regards

  Phanikanth

• Get the error when the wsdl

  Hello
  
  I installed WCC 11.1.1.6. I downloaded the WSDL content WebCenter for CheckIn. While hitting the WSDL by SOAPUi, I get the error "the request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the application already includes identification of the authorization information, then the 401 response indicates that authorization was refused for those credentials. If the 401 response contains the same challenge as the previous answer, and that user agent has already attempted at least once authentication, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include diagnostic information relevant. HTTP access authentication is explained in article 11 ".
  
  Any help is appreciated.
  
  Thank you.

  Hello

  Open SOAP UI - projects - - name of WSDL - demand.

  Highlight and select request - down left - ask properties see - here, username / password will be displayed.

  I hope this helps.

  Thank you
  Srinath

• get the error when you use the TRIM method in the collections

  Hi Experts,

  When you use the TRIM method I get below error. I make any mistake here?

  DB: Oracle 11g

  SQL > declare

  2

  emp_tab of type 3 is the employee table % rowtype index directory.

  4 l_emp_tab emp_tab;
  5

  6 start

  7

  8 select * bulk collect into l_emp_tab of employees;

  9 l_emp_tab.trim (5);

  10 dbms_output.put_line (l_emp_tab.count);

  11

  12 end;

  13.

  l_emp_tab. Trim (5);

  *

  ERROR on line 9:

  ORA-06550: line 9, column 2:

  PLS-00306: wrong number or types of arguments in the call to 'TRIM '.

  ORA-06550: line 9, column 2:

  PL/SQL: Statement ignored

  Thanks in advance for your help.

  See you soon,.

  Suri

  For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.

  Gerard

• Get the error when you use the Oracle 9.2 on RRS 4 installation

  Hi all
  
  I was getting error while installing oracle 9.2.0.4 in Red hat advanced server 4
  
  YES was generating a message

   could not able to relink ins_sqlplus.mk  and ins_rdbms.mk

  but I'd ignored, after installation of the oracle s/w, I relinked bleow files
  
  I also tried running the command below
  

  [oracle@oracle lib]$ make -f ins_sqlplus.mk install
  
  but when i try to make ins_rdbms.mk i was getting a error
  
  [oracle@oracle lib]$ make -f ins_rdbms.mk install
  .
  .
  .
  .
  .
  ..
  .
  u01/app/oracle/product/9.2.0.1/db_1/lib32/libgeneric9.a   `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -Wl,-rpath,/u01/app/oracle/product/9.2.0.1/db_1/lib:/lib:/usr/lib -lm    `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -ldl -lm    -lvsn9
  /usr/bin/ld: crt1.o: No such file: No such file or directory
  collect2: ld returned 1 exit status
  make[1]: *** [/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib/extproc32] Error 1
  make[1]: Leaving directory `/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib'

  Please suggest me if this will have an impact on the DB
  
  Published by: user00726 on July 8, 2009 23:06

  If the error only occurs when you start the dbca Wizard, the database itself should be ok. Before using it for the production you can stress test your db using swingbench or hammerora to be sure that iti works well.

  Concerning

  Oliver