Get the name of the DB file

Similar Questions

• When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working.

  When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems?  Thank you

  Original title: frustrated in New York

  The problem seems to be the igdumd64.dll:

  Fault Module name: igdumd64.dll
  Fault Module Version: 8.15.10.1749
  Timestamp of Module error: 4a5bdf54

  The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.

  You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:

  http://www.Intel.com/p/en_US/support/detect

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I get the jpg files to show after recovery?

  So, I accidentally deleted permanently about 4 000 pictures on my computer today. I found a recovery program that could get back them. Unfortunately, I couldn't have my phone to allow my office transfer images here (for an external hard drive). I advanced and retrieved the files on the hard drive even I had deleted the same if there was a possibility of problems. I discovered that one of the problems is a jpeg images wouldn't show.

  My question is, is it possible to get the jpg files to show? Or am I just more or no chance?

  Thanks for any help.

  It seems that some of the recovered image files are corrupt and are therefore not visible. Microsoft® Security MVP, 2004-2010

• When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed)

  original title: codec

  When you import a song from itunes for windows moviemaker I get the message (file cannot be imported because the game to version Recentepour the file codec is not installed) how can I fix it?

  Install the codec.  Really.

  Something like GSpot to understand that one.

• codec error, I get the message (file cannot be imported because the codec required not installed) how to install appropriate codec?

  original title: codec

  I have windows vista Home premium.  I get the message (file cannot be imported because the codec required not installed) how do we install the right codec

  ... How to install appropriate codec

  There is an excellent set of codecs available here.

• I get the same files repeat KB and how to stop it?

  I get the same files repeat KB and how to stop it?

  The KB record number are KB2478663 and KB2518870.

  Mike

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/how-to-stop-the-KB-file-from-keeping-repeating-to/21fb21b2-9a13-4261-9c1a-e7ef90a9e6a0

• By using the Microsoft XPS document Writer print driver, I no longer get the XPS files indexed.

  By using the Microsoft XPS document Writer print driver, I no longer get the XPS files indexed.
  Open the file "print" with the XPS Viewer XPS and while trying to search inside, I get this message:

  The XPS Viewer has finished searching for the document. The search item was not found.
  There is no searchable text in this document.

  I have 'print' some of my pages on the Bank, internet bank that every now and then I get a searchable history on disk, and opening a XPS I created in April (2011), the text is perfectly accessible, and I can select text with the mouse. However, the next printed file may, the entire document more like a picture. Nothing can be selected, and the message shown above, appears when you try to search for in the document.

  What could be the error? Can I change something to get back to normal "text printing" or is this a deliberate, change that has been installed from Windows update or even?

  Hello

  1. what changes have been made to your machine before the problem?

  I suggest that you follow the steps below and check if the problem persists.

  Step 1:

  Refer to this document to ensure that the settings are correct for Microsoft XPS Document Writer.

  See also: print in Microsoft XPS Document Writer

  Step 2:

  Perform the System Restore to the point that your XPS Document Writer worked very well.

• How to get the mov files to play on ms media player

  Hello how is what we all mov files by our cameras when we're doing videos, that I can up load on youtube very well, but my Media Player will not play. Please don't tell me about codecs unless you include the link to get the mov files. Thank you

  Right-click on the mov file and point to open with, click Windows movie maker,

  Rotation is on the top / center and Save is on the top / right.

• Where can I get the iso file of windows 8?

  I bought a cd of Windows 8, I have the product key, but I don't have the cd anymore. I tried to use the installer of windows 8 on the website, but it keeps saying that he could not tell if my pc is ready to install windows 8. where can I get the iso file?

  Who does not work even when the online version and commercial version are somewhat different and your retail key are except in the download web site. You will need to either borrow a DVD of 8 Windows or contact Microsoft support and get a replacement.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• I need a file to an exact width and height and it must be in png format, because it allows to translucency. My graphics are only the top of the page and when I export only the graph is not exported the entire file. How can I get the entire file to ex

  I need a file to an exact width and height and it must be in png format, because it allows to translucency. My graphics are only the top of the page and when I export only the graph is not exported the entire file. How can I get the entire file of export including blank parts?

  in the export dialog box, you have chcked 'use of work plans? ''

• How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  I want to continue my membership with Adobe, however, not if it requires some additional software purchase.

  For .ai files, you will need to use or know someone who uses Illustrator or another program compatible .ai to convert. If you access a page of image details before license you can see the file type.

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.

• I bought PhotoShop Elements 11 several years ago, I have the serial number, trying to download to my new computer. Can someone tell me where I get the download file?

  I bought PhotoShop Elements 11 several years ago, I have the serial number, trying to download to my new computer. Can someone tell me where I get the download file?

  Download Photoshop Elements products | 10, 11, 12, 13