Get the total number of messages in the blog

Similar Questions

• How to list the Total number of messages in the specific queue

  Hi all
  Message queue
  How to list the total number of messages in the specific queue using wlst
  
  Published by: 666666 on 8 March 2012 04:42

  You might have more luck post it on the forum JMS...

• SQL query to get a total number of calls date in 72hrs of another

  I'm writing a query that returns a total percentage complete within 72 hours.
  
  where appt_dt 72hrs of referral_gen_dt I do not know how to configure it?

  For 72 hours is 3 days...

  where abs (appt_dt - referral_gen_dt)<=>

  (oops)

  Published by: SomeoneElse on December 10, 2008 11:34

• How can I get the total number of pages printed on my LaserJet 3055?

  I have a nice 1012 LaserJet that is not supported in Windows 7, but there is a solution which is to set up a Vista driver as if the printer is a LaserJet 3055.  It works, even if sometimes I get a printed statement that it does not work, and when that happens I just turn off the printer and turn on again immediately and it is fine.  I would like to know if there is anyway I can get the total number of pages printed at some point, as I could with the LaserJet 1012.

  P.S. This thread was moved from software for Laserjet. -Hp moderator of the Forum

  Please ignore my post on the LaserJet 3055.  With the help of a good soul on another thread of discussion, I was able to install and operate my LaserJet 1012 printer on Windows 7, exactly as it did in XP.  No errors, no slow printing, no problem.  The LaserJet 3055 thing helped initially as a work around, but the message about the bad personality who stopped the printer until you turned off and turned it back was boring.

• How to get the Total number of nodes XML?

  Hi all

  I have a Flash program that I do in Actionscript 3, using CS6.

  I use the XMLSocket class to read XML data. I'll write some examples of XML that is sent to the Flash

  program below...

  I know with this line here (below) I can access the 4th 'element or node' of XML data.

  To access the XML nodes/elements:

  * I created a Variable XML, called xml, and "e.data" contains ALL the XML data
  var XML = XML (e.data);

  Access to the 4th item of the data:

  . xml MESSAGE[3].@VAR;          -> 'loggedOutUsers '.

  . xml MESSAGE[3].@TEXT;         --->     "15"

  EXAMPLE OF XML DATA:

  
  

  < FRAME >

  0 < VAR MESSAGE = "screen2Display" TEXT = "FRAME_1" / >

  1 < VAR MESSAGE = "numUsers" TEXT = "27" / >

  2 < VAR MESSAGE = "loggedInUsers" TEXT = "12" / >

  3 < VAR MESSAGE = "loggedOutUsers" TEXT = "15" / >

  4 < VAR MESSAGE = "admins" TEXT = "2" / >

  < / FRAMEWORK >

  I'm new to Flash and Actionscript but I am very familiar with other languages and how paintings and other work, and I know for

  example, in a Shell Script to get the total number of items in an array called 'myArray' I wanted to write something like

  This-> ${#myArray [@]}. And since the data processing XML looks a lot like a table I thought that there was perhaps

  a way to access the total number of "nodes or elements" in the XML data...?

  Any thoughts would be much appreciated!

  Thanks in advance,

  Matt

  even if you don't need to run to the loop to know the length

  var levelList: XMLList = xml.children ();

  levelList.length (); This will give you the length of all children in your case of length MESSAGE of nodes;

  Pls click useful if my answer is helpful.

  Thank you

  Bala

• When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?

  When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?
  I'm more interested in the case when this number is smaller than the total.

  Hello

  I think you mean the text stating "x of there matches", to the right of the box where you entered the search term.

  The first number ("x" in my example above) indicates the current entry highlighted on the page that matches the search phrase. If you use the upper and down arrows to navigate through the instances of this term on the page, you will see this number go up and down.

  I hope this helps, but if not please come back here and we can look at another solution for you.

• I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

  I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

  Do yourself a favor and remove the application.  Mac do not need AV applications and at best, they will be not hard (but not good either) and at worst will corrupt your system / OSX's built in protection.  Your concerns are malicious software that requires the cooperation of the user to install, not the virus.

  For more information, please read this:

  http://www.thesafemac.com/

  Ciao.

• When I try to use Windows Update, I get an error message when it tries to check the updates. I get the following error code [error number: 0 x 80070424]

  I get the following message

  Also get the red shield with X saying if off automatic updates.

  Tried fixing it by going to control panel, but it does not allow me to change the settings

  [Error number: 0 x 80070424]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hi, I found the answer! Right click; Start, then on run, copy and paste this command, click OK. Problem solved!

  Bill

  % SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

• Is there a way to get the total number of samples to a TDMS file?

  I'm looking at the documentation for the function of properties Get TDMS and I see that it has a property: wf_samples which "represents the number of samples in the first data segment. Is it possible to get the number of samples in, say, the second segment of data? My goal is to get the number of samples in all segments of data for a single channel.

  To retrieve the total number of samples, I use the properties of 'NI_ChannelLength' to be linked to the function of TDMS properties get.

  The I64 outbut gives you the total number of samples of the selected channel.

  See attachment so useful

  Marco

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• I can't receive emails on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.   Problem seems to be with the program Outlook Express and think I need to reinstall.  How do you do that?
  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Hi MikeGoodold,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• Ligtroom 6 best, I will describe my problem once the hour 1. After 4 weeks, I get the message "trial version Ligtroom 6 expired 2. You will be asked to fill out my license number 3. After completing the restart and get the message "error 16" 4. Never

  Ligtroom 6

  Better, I will describe my problem once right

  1. always after 4 weeks, I get the message "trial version expired Ligtroom 6a

  2. you will be asked to fill out my license number

  3. After completing the restart and get the message "error 16".

  4. all again manager install Adobe again and install this once again repeated problem Ligtroom each month can ensure that this stops my version is a purchased official version

  Now repeat the problem after only 4-5 days!

  Caveat! I'm not a computer specialist are not too complicated solution

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html