Get the username in the workflow process

Similar Questions

• I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  When I go to one of the three users on a Vista Home system, I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  I ran SFC and chkdsk for this user, (took 2 hours) and it is not fixed. Help, please?

  I ended seting up a new user for my wife, the user who is messed up. and I overcame everyting execpt his address book/contacts. She wants me to fix the first. Help, please.

  SpamLessSN

  Hello

   
   
  Are what contacts/address address you referring to?
  
  Perform the following steps in order to correct the damaged user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Hope this information helps.
   

• Always get the host process for Windows Services has stopped working

  I read all responses answered messages ago. I did everything in the answers and always without result I always get the suggested message. Can anyone help with this? Here is the error log

  Signature of the problem
  Problem event name: APPCRASH
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c000071b
  Exception offset: 00088d 15
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0e02
  More information 2: b21b56b606e7544720668ce364087082
  3 more information: 0e02
  Additional information 4: b21b56b606e7544720668ce364087082

  Hello

  The SVCHOST. EXE is connected to many different processes and it is not uncommon to be asked to run a number of times.  As long as Svchost.exe is requested in the system32 folder is not the issue.

  Method 1

  In many cases this would happen because of security software installed on the computer.

  I suggest you disable the security software installed on the computer and check.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2

  If the previous step fails, then it may be due to infections of virus or malware on the computer, I would say that you scan and remove all infections from the computer and check.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use databases of Microsoft security to scan your computer

  http://www.Microsoft.com/security_essentials/

   

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps

• How get the workflow of the package belongs to?

  Hello!

  Is there a better way to get the package (or package list) the workflow is part of the script (which is part of the same workflow), rather than iterating through all the packages the server and find specified workflow in them?

  Thank you.

  Some examples of code. I've updated some code me his words so please test. You need succeed the workflowId that you are looking for.

  var allPackages = Server.findAllForType("Package");
  var packagesForWorkflow = new Array();
  
  for each (var pack in allPackages) {
  
      for each (var wf in pack.workflows) {
          if (wf.id == workflowId) packagesForWorkflow.push(pack);
      }
  
  }
  

• Get the Workflow Notification SMTP sender programmatically

  Hi all
  I get the SMTP information that are set up in oracle applications r12.
  I need to know how we can get it programmatically. Is there a view of database?
  
  for example smpt.gmail.com
  
  We provide installation deducted e-mail from the ADF page.
  
  Thank you
  Suzanne

  Hello

  Please see the FND_SVC_COMPONENTS and FND_SVC_COMP_PARAM_VALS tables (more details on the tables are in the eTRM website).

  Workflow notification mailer sends do not spam
  Re: Workflow notification Mailer sends do not spam.

  Note: 415721.1 - the table that stores the NEW test address 'set override?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=415721.1

  Kind regards
  Hussein

• How can I get the synchronization process to send an email to confirm the account?

  Synchronization program accepts no password and when I try to get the link sent by email is not good

  I just tried it with my account and I received the e-mail to reset very well after a few seconds. It shows a huge blue button with "Reset password". What do you see?
  If this is not the case, can you please send a screenshot showing the email that you got?

• Can not get the updated process / update registry denied

  I can not complete the update process, the system does not allow to install (unauthorized priviliege) to change the registry key is located in HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Impage file Excution\Acrobat.exe. I'm stuck and can't do anything to fix my installation of Acrobat ChineseT 10.1.13. Help, please!

  Hi simonw33448541,

  Please, try the following:

  1 try to repair Acrobat via Add/Remove programs in Control Panel. Then try to install the patch.

  2. If the option above didn't work, then you can use Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove Acrobat completely from your system, then try to re - install Acrobat and then apply the latest patch.

  Kind regards

  Sandeep

• How to get the logical processing Page to run?

  I'm a newbie struggling to overcome the learning curve. I created a very simple page that consists of an element (which do not refer to a database object) and a button. After the user enters a value and click on the button, I want to a PL/SQL code block always fire. I created a new anonymous PL/SQL block in the section of the process. See hierarchy of Application Builder below.
  
  The page definition
  Page processing
  Treatment
  Process
  
  The code is very simple.
  
  Start
  HTP.p ("in the custom code. The htp.p message');
  dbms_output.put_line (' in the custom code.) Dbms_output message');
  insert into PT_ERR_LOG (RUN_UNIT_ACTVTY_TXT) values ('in the custom code.");
  end;
  
  It was designed simply to let me know that the code is accessed. When I run the page, however, I'm not either of the messages from the code or y at - it a line written in PT_ERR_LOG (I created this table).
  
  The question is: "why isn't the enforcement code?
  
  In the area of process Point, to the point of process article is set to "On submit - after calculations" and Validations
  The enforcement process is defined on ' once per visit or when Reset.
  
  In the region of Conditions, Type of Condition is "point value / column in Expression 1 is NOT NULL.
  The value of Expression1 is: P6_PGNT_ID, which is the name of the lonely field on the page.
  
  I tried different combinations of values of the Apex in and around the page in the Page processing. What I am doing wrong?
  
  Thank you
  Kim

  In the Conditions region, Condition Type is set to "Value of Item / Column In Expression 1 Is NOT NULL".
  The value of Expression1 is :P6_PGNT_ID, which is the name of the lone field on the page.
  

  That's the problem. The value must not be P6_PGNT_ID: P6_PGNT_ID (remove the colon)

  P.S. Please configure a user name other than 952822.

  Robert
  http://apexjscss.blogspot.com

• Getting the activity process instance information

  We need following:
  
  The process instance will be created manually or integration of another system. It is not possible to have two instances running in the same process, so we want to check if there is already an instance running for a given process. The company information that uniquely identifies the process are attributes of the process data object.
  
  We know how:
  (1) check if it is already existing instance of the process that gives the information of the company that identifies it
  (2) check that the existing instance is running or completed completed
  
  We want to know if there is no existing API, we can use to achieve the needs above, what are their and where you can find more information of their use.
  
  We tried to look in the documentation of the API which methods might be useful, but we were not able to identify the existing documentation, any one who was able to attend to our needs.
  We have also not found any topic in this forum on this topic.
  
  If possible, please give us some examples of use.
  
  Version: Oracle BPM 11g

  Hello

  In SOA Suite 11 g, you can use the Java API with Composite sensor to achieve this behavior:

  1. first create a composite sensor in the operation to create the composite process instance, during initialization of the sensor with the company information that uniquely identifies the process. This composite sensor can be used to locate the composite instance EM or through the API. See http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_compsensors.htm#insertedID0 for more information about the creation of Composite sensor

  2. with the help of the Java APIs (http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e10659/toc.htm), find the composite instance by the Composite sensor, as explained: http://blogs.oracle.com/soabpm/2009/08/soa_suite_11g_-apipart_3_-_f.html. With a reference to the composite instance, you can check its States of internal components.

  The following libraries must be imported in your java project:
  - /oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar
  - /oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar
  - /wlserver_10.3/server/lib/weblogic.jar
  - /oss_11gr1/soa/modules/oracle.soa.fabric_11.1.1/oracle-soa-client-api.jar
  - /oracle_common/webservices/wsclient_extended.jar

  I hope this can help.

  Kind regards
  Rafael

• Why can't I update my windows? and I get the host process crashing

  Well, I'm not able to update my Windows Vista Home premium and recently I get host process crashing error, I try to updated manually or through the update it gives error code 80072FE and the update was on 05/20/2010.

  Well, if I click on the link to update microsoft it cannot display web page gives, so any solution please help

  Hello CamboiJack,

  Thanks for your post.  Take a look at this article for a possible solution to your problem and let us know if it did or did not work for you.

  See you soon

• Darken your SWF? What is the workflow process?

  I think that it is probably a good idea to hide my swf before delivering it to App World. Anyone done this yet? It seems to be a lot of things about it on the Dev Java forum but nothing here.

  I've never used obfuscation and don't know what the process would be to deliver a .bar completely signed, sealed and delivered to the App World. Could you walk me through it?

  Thank you in advance,

  Brian

  SecureSWF is by far the most popular solution?

  Here's an interesting thread on this on SO

  I use the command line to package and sign my apps (since I use Flash CS5), so I'm not familiar with signature how is executed with Flash Builder.

  1 publish your swf file

  2 obfuscate the swf

  3. package and sign the swf obfuscation by using command line tools

• input parameters for the workflow process in OWB

  Hi all
  
  My plan is to have the number of years input parameters and the date of the beginning of the year. I have included this map in the process flow. When I execute the process flow its does not have input parameters. Someoen can tell me how this can be achieved.
  
  Thank you
  Amrit

  Amrit,
  You must add parameters to processflow then [link parameter mapping | http://download.oracle.com/docs/cd/B28359_01/owb.111/b31278/concept_processflows.htm#BIHCIAFB] to corresponding processflow params

  See also [article on parameters processflow | http://blogs.oracle.com/warehousebuilder/2009/01/process_flow_parameters_1.html] the blog of OWB

  Kind regards
  Oleg

• How to get the workflow rule to copy a picklist value in another field?

  I'm trying to copy the selected value in a list, which we will call "OldField" in the accounts and duplicate exactly in another version of this list of choices, that we will call "NewField" (with all the values in the drop-down list exactly copied). OldField is a required field, but this isn't NewField.
  
  NewField is configured with a default value of OldField, and I created a new rule of workflow as follows:
  
  * (IfNull (PRE ("< NewField > '"), 'Y') = 'Y') OR (PRE ("< OldField > '") <>[< OldField >]) *.
  
  When this condition is met, I created an action to a value equal to NewField * [< OldField >] *.
  
  When I edit an existing account, it copies the value very well, but when I create a new account record and click on save button duplication, fails to occur.
  
  Does anyone have any advice as to what I should do to correct my workflow rule?
  
  Published by: [email protected] on April 3, 2009 08:04

  Add the default value to the new field and check the default post.

• Exclude a member from the entity of Workflow process

  Hi all
  
  How to exclude a member entity shape workflow process?
  
  Thanks in advance,

  Hello

  If users have access to the dummy cost center, it will show in the workflow process.

  Dummy cost centers are not normally assigned to users, but used for calculations etc. But the requirements are different.

  As long as users are not able to change it in the workflow, I would say you need to set the expectations of the user.

  See you soon
  RS