Get the username of person connected to the BPM 11 g workspace.

Similar Questions

• applying the BPM in the score editor

  Hi people, I have studied the score editor in logic 10.2 since last week and I printed my first lead sheet BUT! for the life of me I can't get the BPM to paste into the box of the game, every thing in the area of the game seems to work, but when I click and hold and drag the little icon BPM until the beginning of my manuscript, it does not remain and disappears, it must be something small I am doing wrong any help would be appreciated.

  Kind regards

  Darby

  This symbol must be applied to a bar/beat station personnel. It can be placed freely anywhere because it must be fixed on a stand to place first, and then it can be moved with the page layout tool, where you want.  Turn on Guides so you can see the anchor points and drag a measure - then move it where you want.

  You cannot drag the partition without attaching to a post.

  

  Selected - "selected items below" so you can see the guideline after it has been inserted.

  

• I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say I'm dum

  I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say that I'm connected to the Internet when I try to do.  Anyone have an idea what is wrong?  Thank you.

  Please try: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Get the "failed connection: incompatibility of username/password when you use IE accessing the page of Configurator vco.

  When configuring a device to vCO 5.5.2 I can't login the configuration page https://:8283/ using IE as your browser. I constantly get the message: ' failed connection: incompatibility of the username/password or account temporarily blocked after too many failed attempts. But not changed the error even after that I changed the password. Suresh -

  Use a different browser (Firefox or Chrome) and it will work ;-)

  Kind regards

  Marc

• How can I get the last connection time and full usernames on hyperion?

  I use essbase 9.3.1 with shared native security services. Is it possible that I can get the list of users with the latest log in time (the list that you get when you go to the security-> users-> users Bulletin Board... in EAS)? EAS shows the list which designates the data exists somewhere. Can someone tell me how I can get the data in the system so I can see it in an editable form... like excel?

  Reading- Re: the last details of the users connection Info

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I deleted by mistake my certificates. Now, I get the error messages trying to connect to gMail, eBay and my bank accounts, etc.

  I recently did some "housekeeping" on my computer and for reasons known only to nini-gods, I delected all my security certificates. Now, when I try to log in to gmail, ebay, my bank accounts or any https:// site, I get a warning message "this connection is Untrusted." I click on the links provided to overcome the safety message, but whenever I return to the site I have to jump through all the hoops again. I see a small box that can be clicked to confirm security exception, but the little box that must be clicked to "make the permanent exception" is always grayed out. I know I'm on the right sites - have been using the links on the personal bar for years without problems. It started right after I deleted the certificates.

  I've tried everything. Firefox RELOADED (use 3.6.4) deleted and reloaded the bookmarks, follow the instructions when I get the error message. Nothing works. As soon as I close the browser, and then go back online, I'm back to error messages.

  Can anyone help?

  COR - el: thanks a lot for this solution. Everything works fine now.

  However, I had a problem with deleting the files. I dragged to the trash, and then tried to access the sites in question and received the same message. I restarted the computer and when I checked the files I was dragged to the trash were right where they were before. The only file that are been trashed was the .txt file.

  So I renamed them as you suggested and now everything works fine.

  Thank you again once - I tried to understand by using the troubleshooting Firefox site, but your explanation was simple and easy to follow.

  Val

• I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.

  Multiple connections to a server or resource shared by the same user

  I get the following error when I am trying to connect to a network by using different credentials.

  1219 system error has occurred.

  Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...

  I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.

  Kindly give me the solution as I am now frustrated with this issue.

  Kind regards

  Sajid

  Hello

  ·         Have you tried to access the files that were on Skydrive?

  ·         Did someone else uses your computer?

  From now on, I suggest you try the steps mentioned in the article below.

  Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.

  http://support.Microsoft.com/kb/938120

  You can also ask your question in the forum of the Tech Net Windows Server using best.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope this information is helpful and let me know if you need additional assistance.

• HP 9470 m Ultrabook, Win8 - how to get the 3G connection?

  Hello

  I got a Ultrabook 9470 m of work with Win7 installed. Everything works, cool, but I wated Win8 (64 bit) for my own stuff. So, I installed Win8 (dual-boot) for my use personal. Of course, I have no HP drives or whatever it is. -No worries, I found all drivers for Win8-64 in this site ok. And now everything is recognized correctly.

  But I don't know how to get the 3G card to connect. On Win7 HP connection manager takes care of that. But there is no connection manager for Win8. And google results only direct me to choose the network in the bar 'charm '. Great, but there are only available WiFis appear...

  ... --- ...

  Well, I finally got this resolved. -As usual, it'S just a driver issue, as always with Windows... I suppose that there is nothing new under the stars.

  In any case. Thanks for Cloud_Strider to point to the firmware upgrade. I did, but it alone did not help. BUT I don't know if it was still a part of the solution. So, thank you!

  Unfortunately, Ericsson or Navatel drivers broadband did the trick. -It's the only ounces available on the site of HP support for this laptop. = (Fortunately, I had (finally) look in Device Manager to see what drivers are installed. Seems that this braodband card is a HP un2430. Looking for these drivers for WIndows 8 on Google showed me finally good page on HP which she link to fresh (from March 2013) drivers for this card.

  After removing the old drivers (+ restart) and new (+ reset) installation, broadband is now available. I now write this with happiness through 3 G connection. =)

• I get the error 0x800ccc92 with Windows Mail asking for my username and password.

  The username and password I used does not work.  How can I get my username and password or implement new?

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• When I connect I get the 404 not found error message file

  Original title: 404 File not found

  I was the connection of a webcam that allows me to observe a bird's nest.  I went there

  several times a day for about 6 weeks.  When I log in now, I get the 404 not found error message file.

  I returned to view history and tried to bring it up like that without success.  All other programs seem to

  to work properly, no recent changes I know.  The eggs should be hatching, and I can't wait to

  Download this issue is resolved.  Any ideas?

  Perhaps that the eggs have hatched and the webcam has been removed.

  The problem is not just about anything on your computer.  You have to ask the person who is the owner of the webcam.

  The 404 or not found error message is an HTTP standard response

  Code indicating that the client was able to communicate with a given

  Server, but the server did not find what was requested.

  The web site hosting server usually generates a "404 Not Found"

  Web page when a user tries to follow a link broken or dead; That's why

  the 404 error is one of the most recognizable errors on the

  The World Wide Web.

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After getting a username / password Adobe download Adobe Digital Editions 3.0 and borrowing from my public library and download e-books to my Kobo Glo, I received the following message: "this document is protected by Adobe digital rights management.

  After getting a username / password Adobe download Adobe Digital Editions 3.0 and borrowing from my public library and download e-books to my Kobo Glo, I received the following message: "this document is protected by Adobe Digital Rights Management (DRM) and is not currently authorized for use with your Adobe ID.  Please connect with the authorized Adobe ID and try again"

  [moved from the download, installation, commissioning to Adobe Digital Editions]

• How can I get the user name of the current user? Not the name of the user, but the user name is connected to.

  Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.

  Thank you!

  Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.

  Sounds to me like you may need to get hands on with the services of a JavaScript programmer.

• get the username on vsphere client of web

  Hi all

  How can we get the currently logged in user name in the web client of vsphere. Son of https://communities.vmware.com/message/2297455#2297455 and https://communities.vmware.com/message/2246358#2246358 have been useful, but in the nets, code connects to the vCenter server, I want to get currently logged user. How can we get UserSession object without calling vimPort.login. Is it possible to get connected vimPort currenlty logged the user object in the web client of vsphere.

  I need to know the name of the current user logged to the customized access privileges to give in my plugin.

  Any help will be greatly appreciated.

  Best regards

  Sumit Tyagi

  UserSessionService.getUserSession () .userName gives you the username.

• Get the source of Weblogic database connection

  Dear all,
  
  Hopefully, you guys right. :-)
  
  How to get the Source of Weblogic database connection string?
  
  I have a Source of data created in my WebLogic.
  
  Because I want to get my Java Bean connection string for Jasper report.

              Class.forName("oracle.jdbc.driver.OracleDriver");
              con = DriverManager.getConnection("jdbc:oracle:thin:@hostname:1521:orcl", "username", "pass");

  Please advice.
  
  Best regards
  Angelique
  
  Published by: Alexis on January 23, 2012 18:37

  Hello

  If you have configured the data source name in the Weblogic, then
  below the code is obtained the connection based on the name of the data source.

          java.sql.Connection connection = null;
          try {
              javax.naming.Context initialContext = new javax.naming.InitialContext();
              javax.sql.DataSource dataSource = (javax.sql.DataSource) initialContext.lookup("<>");
              connection = dataSource.getConnection();
          } catch(Exception e){
               e.printStackTrace();
          }
  

  Kind regards
  Hari