Get to the main menu.

I can't to my main menu by pressing the menu key. Am I missing something?

I have a brand new Clip 2 GB. I put some mp3s on it according to the instructions. Fortunately, I listened to the music. I decided to see what could make the Clip. So I stopped the music for the game (pause) and then pressed the Menu button which just brought me back to the 'Music' helmet page. Pressing the Menu button repeatedly everything just switches between the song paused and the helmet page 'music'.

I downloaded the updated firmware (2.0.xx?). This did not help.

The only thing that seems to work is when I get to the page 'Music' helmet, I can push upwards and downwards on the control disc, and he travels by music - FM Radio - voice - settings - music. But no main menu.

I tried looking for the Sansa Clip Knowledgebase with + menu, but got a lot of success. I looked around, but didn't see anyone else having this problem. And I can't remove the batteries to reset. :-)  (BTW, I don't have reset (15 seconds until power slider) and it did nothing.)

Any help would be appreciated! Thank you.

Paul

Thank you! Everything works as you said. Gracias! -Paul

Tags: SanDisk Sansa

Similar Questions

  • can't get to the main menu with my remote

    Hi guys, someone throws forward? I have a main menu and 3 menus of scenes.  When I hit the "menu" button on my remote, it goes to the menu stage 1.

    I created a certain projects until now and my remote worked well with them.

    But on this project, in every single scene menu, if I hit the top menu, it goes to the menu stage 1.

    I have reviewed my settings and can't seem to find where this fact is somehow indicated on my project. IF I don't reach my "main menu" button it will go to the main menu.

    Thanks for any help! very much appreciated.

    NAVE

    Now, how can I change these?

    Here's my menu with the Routing button:

    Note this button number 6 titled "gravity" is followed by the key #7 "I had my mom.  He is one who WILL not arrow down. So if I'm on "gravity" and "arrow down", it goes to the "funkytown" and refuses to go to "I got from my mom.

    To change this, first select the menu in the project Panel and now in the properties panel, uncheck the "Automatically Route buttons" in the properties of the menu.

    Now in the figure above, you will see that the mouse pointer becomes a hand icon when you hover over any number of the rectangle button number.

    Simply drag the desired number and you're done.

    For example, in your case, to go to the #7 button when you press the #6, go to the reduction in the rectangle of the #6 key and drag and drop it to number 7.

    Then, you'll see that the rectangle button # 6 number 7 instead of the number 8 (which is in the figure right now.)

    Do this for each button.

    Good luck.

    Thank you

    Ramesh.

  • How are you going to the main menu while watching a dvd

    While watching a dvd how do you get to the main menu?

    In Media Center, right-click and select controls then menu options to go to the DVD menu.

  • How do I get my Apple TV purchased apps to appear on the main menuHow to get my Apple TV purchased apps to appear on the main menu

    How to get my Apple TV purchased apps to appear on the main menu? I got all my apps on the main menu. I had to reset and reinstall Apple TV to get Airplay for work. It worked, but now my apps are only visible when I go to the window "purchased apps.  I would do again all back on the main menu. There are 19 of them. How can I move them into the main menu? That's where they were all before resetting. Apple TV Gen.4. I asked the President, but she did not.

    Apple TV does not display the cloud purchases would be in the same way, an iPad or Mac. You must re-download your applications so that they will appear on your home screen. Good luck.

  • I have remove the version options in the main menu bar in Daemon tools pro advanced 5, now I can't get back them.

    I remove options in the main menu in Daemon tools pro advanced version 5 bar, now I can't get back them, can someone help me how to recover the menu buttons in the user interface of the daemon tools toolbar

    original title: daemon pro tools

    Hello

    The question you posted would be better suited to the community of Daemon Tools. Please visit the link below to find a community that will provide the support you want.
    http://www.daemon-tools.cc/Eng/support

  • video gets sent back to the main menu after the first chapter

    Last night, I burned this DVD and it was perfect - no error message to check the project.  It burned on a disc very well.  Then I went to bed happy.  I woke up and popped the DVD in a DVD player.  When I hit the play movie button, it plays a chapter only before returning to the main menu.

    So I went to the scene selection, and when I choose the 1st chapter to look at, it's going to do the same.  After the first chapter, it goes back to the main menu.

    If I choose the 2nd chapter, he continued to play through the video normally.

    It makes me carzy, so I thought that I was watching the movie in the preview.   Sound disappears and the video freezes for the first chapter.

    Here are some screenshots of my project and the flowchart:

    full_project.jpg

    flowcart1.jpg

    flowcart2.jpg

    Any help is very appreciated.  Thank you!

    Edited to add: after preview freezes, and I close out of it, he says: "unspecified error of drawing."  I just made another preview, just to play the movie and the sound was there, but it froze after a little in the chapter.

    The complete project JPEG is too pixelated to really say much about it and the linked version has a header error and does not open. Can you redo this JPEG and maybe use a PS JPEG about 9 frame? It would also be useful to have a close-up view of the timeline with chapter markers.

    Now, what are the Actions of end for each of these chapters?

    For the Play of All, have you looked in a chapter Playlist? If you create one, with the chapters in any order you want, and then set end of Playlist Action chapter to return to your main Menu, "replacing" the end of chapter Actions. NOTE: I use the term 'override' as a verb and the noun "ignore."

    Regarding replacements, this sounds like there might be still a TAPI on. They can be applied in many places, and it's a bit of work to check all the buttons, chapters, timelines, etc.. They can be literally anywhere and should not be used.

    Forward the new screenshots. Might be something obvious here.

    Last question: how long is your first chapter?

    Good luck

    Hunt

    PS - most of us ignore an "answered", or similar icon and read almost all the wires without worrying.

  • I need to disable the 'Help' option in the main menu.

    I am running Public Fox 1.09 as an addition in our school district, because it allows me to keep the students from our proxy. They discovered that all that they have to go to 'Help' and 'restart with disabled modules. They can then select "Not of Proxy" and get anywhere that they want. I need to disable the 'Help' option in the main menu.

    Hello NeonLeon, if it would be possible in principle to hide some menu entries, the next thing that your students will discover is that you can also get in safe mode by pressing the SHIFT key while launching firefox, so it's no solution...

    You can use a mozilla.cfg file in the firefox program folder (where the students hopefully will have no write access) to lock some preferences as the configuration of your proxy, for more information, see: http://kb.mozillazine.org/Locking_preferences

  • Why is the main Menu on the BB Desktop Manager BlackBerry Smartphones lack email settings?

    The image on the screen for the BlackBerry Desktop Manager, as described in the User Guide, shows six options on the main Menu.  On my BlackBerry Storm 9530 Verizon, when I go to BB Desktop Manager (4.7), I see only five options.  One that is missing on my device's e-mail settings.

    Anyone know why?

    This icon appears only if you have installed using the BlackBerry Enterprise/redirector option during installation. If you have installed using the Internet Service so you don't get the e-mail settings icon.

  • Display msg text blackBerry Smartphones to the top on the main menu and can not remove it

    All of a suddend a text msg popped up on the main menu under messages.  I have since read the message and deleted, but he is still listed in the main menu.  I deleted numerious times but can't seem to get rid of it.  Any suggestions?

    Restart the device taking (with the phone lights up) take out the battery for 30 seconds and then reinstall again, try again to delete the SMS and let me know

  • How can I add a text field for the main menu?

    I have a project with a menu.  He has a title.  I wanted to add an additional track on the menu, what I had done in an earlier draft.  I would have thought he would have intuitively obvious, as highlighting the existing title I and do a copy and paste.  However, I learned that nothing is intuitive with Premiere elements 12.  Can someone tell me how to get a 2nd title on my main menu?  I have done it before, but apparently did not write it and I was faced with that I falsely assumed would take me 30 seconds to accomplish.  Thank you.

    Rick

    Do you really need a second title for the page in the main menu and the selection of scene or you page fixed for your Adobe title in more than one line?

    I wonder

    I wanted to add an additional track on the menu, what I had done in an earlier draft.

    Is it possible that as soon as you use a theme which came with 'subtitle', as the trip/Beach Resort, not all do.

    Workaround for the title with more than one line of text can backfire on you. But you can try. Excerpt from my first items 13 on this blog

    0019 first Elements 13 movie Menu title question: multiple lines of text


    A first elements 13/13.1 user reports that, if it creates a 3 lines of title text for the main menu of the fake big screen theme in the customization area of Movie Maker project, these 3 lines of text eventually "encoded" in the project of reopening after that that there had been closed.

    We have confirmed this report and extended it to include this problem appears for 13 of Menus other than the fake Widescreen cinema. This issue is not seen in first items 12/12.1 and earlier versions.

    BEFORE REOPENING THE CLOSE SAVE

    Figure 1. Main menu of Spring Flower home with 3 lines of text, as seen before the closure of the Reopen

    AFTER THE REOPENED NARROW SAVE


    Figure 2. Spring Flower main Menu title initially with 3 lines of text, as seen from the closure of the Reopen



    The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to.


    Many variables were examined to explain this behavior. So far, no answer for why.

    If you are determined to use a particular theme that comes with the title menu and subtitle, look at the text of the Palette layers layers in the editing menu .psd file (.psd Editor could be Photoshop CS or higher).

    Regarding

    on my project last year that was the menu that I liked with 2 text fields, I have also got rid of the "arrow" shortly before the text that was the menu key.  Anyone know how I do that?  I can't figure that out now.

    Could you be more specific. But, for now, consider... If you Play All text, you double-click to open the text of the amendment, the deleted text, click OK. Play All disappeared. Sometimes, in page and removal of text "main menu" scene selection to the navigation button... double click on the button to open the changes to the text, delete text, press ENTER, and then bar spacing, and click OK.

    Please let us know if everything above the target you wanted to know.

    Thank you.

    RTA

  • How to create drop down menus in the main menu?

    How to create drop down menus in the main menu?

    such as:

    1 menu 2 menu 3 menu 4

    menu one

    menu b

    menu menu menu x c y menuz

    menu d

    I have the top menu, but don't know how to get the submenus

    Help you to appreciate in advance

    You must set the 'Pages' menu preferences:

  • Empty folders in the main menu

    Hello

    I've set up some users, but I have a problem.

    Some records remain in the main menu (whithout even showing all pages inside) which is a little annoying. Does anyone know how to remove them?

    Also, I was wonderign if it was possible to change the composition of the record? For example, put pages in different folders?

    Kind regards
    Stijn

    Yes, deleting it would remove all users. You don't want to delete it. When you have found the folder in the Structure and the content, click on edit, then go to the Security tab. From there, change the list of lists of permissions for authorization lists used by the child ARB corresponds to the list.

    A folder must contain all authorization of each of his children ARB lists. Sometimes, these can get out of sync.

  • where is the main menu button

    I'm looking for the main menu button

    The main menu depend on your phone.

    If you have a phone with a menu button Android it will be activated by this button.

    If you have a phone with a switch button Android app it will be activated by pressing the three points or lines near the address bar.

  • Some dropdown menus drop on the left edge of the page instead of under the main menu

    Some drop-down menus at the left edge of the page instead of under the main menu.
    This does not happen on all web sites. Very confusing.

    Yes, I see the same thing with Firefox 21 with the menu container.

    Works fine for me with the beta version of Firefox 22 and later, it's broken in the current Firefox version 21.

    You can consider making a custom of the beta version of Firefox 22 Setup or wait a few weeks until Firefox 22 is released.

    You will need to create a new profile for the beta version, so not to launch Firefox after installing the beta.

    See:

  • Imported bookmarks in safari are in a bookmark called IMPORTED FROM SAFARI. Can they be merged into the main Menu of bookmarks?

    I had a few existing Firefox bookmarks but wanted to add a bit of Safari. Now, the imported bookmarks from safari appear as a bookmark called IMPORTED FROM SAFARI. How can they be merged so that all bookmarks fall under the main Menu of bookmarks?

    You can move or copy/paste to another folder in the library (bookmarks/history Manager) through the context menu or the menu organize button on the toolbar.

    • Bookmarks > show all bookmarks

Maybe you are looking for

  • Tecra S2: Problem start & stand-by - black screen - no POST

    Description of the situationAnytime battery & ac adapter, only battery or only the AC power is connected, sometimes the following happens: -Portable-> boot (black) screen. No post no hd activity. No beeps or other strange noises as well.-What laptop

  • Where is Apex 4.26 on the workspace?

    Deal all,I recently signed up for the Apex Oracle workspace free. It showed version 4.26.So I bought a book 'beginning Oracle Application Express 4.2'. I studied thebook and doing the exercises on the Oracle workspace. Now, the workspace is Apex vers

  • First elements 13 accidents with Mac when I try to do the narration

    I tried all different inputs and output settings hardware (from system preferences), and when I see the counter of fluctuating volume (suggesting that the software is listening), the program will crash either start recording or later to stop recordin

  • Make a null object to draw a line

    I'm doing the null object to create a line. The goal is to have a line to attach to a person's head as it climbs through the screen. How to create this effect? I have already created an object draw and it's a solid track. I don't know how I'm suppose

  • Creative setup of cloud with 72 code error

    Hello worldAnd I'm sorry to ask these questions. Well let start it:1: I'm trying to install Adobe Creative Cloud desktop application for mac and all it tries to download his file after a few sec I get error 72 and I look around to find what is wrong,