getting data to and from the DOS window

Similar Questions

• Y at - it a syntax better/more runs to get data to and from stored procedures?

  To test the stored procedure call, I created a simple package

  create or replace package TEST_PROCEDURES as
  
  procedure Test1 (
     arg1 in number,
     arg2 in number,
  
     res1 out number,
     res2 out number);
  
  end;
  
  

  and a page with fields number four (P1_INPUT_2, P1_OUTPUT_1, P1_INPUT_1, P1_OUTPUT_2) and a button excuting the code following PL/SQL:

  declare
    arg1 integer;
    arg2 integer;
    res1 integer;
    res2 integer;
  begin
    arg1 := :P1_INPUT_1;
    arg2 := :P1_INPUT_2;
  
    TEST_PROCEDURES.Test1(arg1, arg2,
                          res1, res2);
                      
    APEX_UTIL.SET_SESSION_STATE('P1_OUTPUT_1', res1);
    APEX_UTIL.SET_SESSION_STATE('P1_OUTPUT_2', res2);
  end;
  
  

  It works, but it looks like a lot of unnecessary code to me. Any suggestions?

  TryingAPEX wrote:

  To test the stored procedure call, I created a simple package

  create or replace package TEST_PROCEDURES as

  procedure (Test1

  in number arg1,

  arg2 in number,

  RES1 number,

  Res2 number);

  end;

  and a page with fields number four (P1_INPUT_2, P1_OUTPUT_1, P1_INPUT_1, P1_OUTPUT_2) and a button excuting the code following PL/SQL:

  declare

  whole arg1;

  Whole arg2;

  integer res1.

  whole Res2;

  Start

  arg1: =: P1_INPUT_1;

  Arg2: =: P1_INPUT_2;

  TEST_PROCEDURES. Test1 (arg1, arg2,

  RES1, res2);

  APEX_UTIL. SET_SESSION_STATE ('P1_OUTPUT_1', res1);

  APEX_UTIL. SET_SESSION_STATE ('P1_OUTPUT_2', res2);

  end;

  It works, but it looks like a lot of unnecessary code to me. Any suggestions?

  Why would you do that? APEX may be referenced in the same way as all the other bind variables (although it is worth noting that their type is always VARCHAR2, so in this case, it will rely on the implicit conversion):

  begin
    test_procedures.test1(:p1_input_1, :p1_input_2, :p1_output_1, :p1_output_2);
  end;
  

  For the previous discussion on this topic, see set manually with PL/SQL session state .

  Always advanced postal code using the functionality of the syntax highlighted in the editor.

• How to read the text from a DOS window in real time?

  I call an executable file that downloads a file to flash memory.  This program displays status information in real time as the percentage of completion in one window BACK.   It also makes account of the CRC of the file as it downloads.  I am currently redirect the output of the DOS window in a text log file.  This works fine for obtaining of the CRC when the file is actually downloading but the operator loses the visibility of the State in the percentage of download.  Is there a way to read text information in a DOS window with my request of LabWindows/CVI real-time?

  Hi Brent,

  If redirect you the output from the first application in a log file, you would be able to read the contents of the file streaming to your second request, and whenever the content changes (such as the download value percentage), couldn't display you this information immediately with the second request in one window DOS or some other GUI?

  Luis

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• need to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista

  you want to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista. I have 3 accounts going 2 for children and one for the parents/administrator. I found ophcrack in several places on the computer. any help would be greatly appreciated

  The only question the idea of Malkeleah, that is when you put a password on BIOS, all you need to do is pop the battery from the motherboard and the password is gone. Faronics has in some programs such as anti-executable and a few other programs that may block the name or ID of a process and prevent it from running (some antiviruses have that option, such as Avast, but usually is a pain in the ass to configure)

• I restored the computer to an earlier date and now the password windows 7 won't save us.

  I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

  I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

  This means that a different password was in effect at this point, even if your daughter thinks otherwise. There are a lot of options built into Windows to help you out of this situation:

  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

  The most important point would be: run a machine without a spare admin account is about as risky to have a house key. Sooner or later, he is at risk for any number of reasons.

• How to get the files to and from the host

  Is there something that I can read which explains how to get the (ftp, memory stick or other) files to and from the host?

  Sorry if this is a noob question, I looked but could not find something specific...

  There are many ways of doing so:

  1 activate not supported ssh and scp use

  2. use VI Client access to your storage space on configuration files and server transfer

  3 configure the iSCSI or NAS to deal directly

• Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

  I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

  At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
  I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
  , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
  (a # 169 instead of a # 192)
  In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
  'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
  Results: connection Test
  Test details:

  I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

  X "Ping 0.0.0.0 Gateway: failure.
  !  "No DNS server is available for this connection.
  ! "No WINS server is available for this computer.
  X "Ping 0.0.0.0 network: failure.
  ------------------- -------------------------------------------------------------------------------------------------------------
  In this same window of diagnostics under the "LinksTab".
  Link current test status: (what is determine the current connection speed of the adapter and link partner)
  Results:
  ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

  The best link options-results of the speed test:
  ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
  (Note that these link tests are online and I can't online)

  Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
  Depending on the tab is the Hardware tab
  Hardware diagnostics check for I/O conflicts...
  Results: all the tests:
  EEPROM test
  FIFO test
  Test register
  Interruption of the tests
  Loopback test

  I also went in the prompt type in IPCONFIG... c which shows:
  Ethernet connection to the Local network card:
  ConnectionSpecific DNS suffix: (it's completely empty here)
  Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
  Autoconfiguration IPv4 address: 169.254.160.220
  Subnet mask: 255.255.0.0
  Default Gateway: 0.0.0.0

  I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

  I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

  I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
  Thank you!

  Hello
   
  We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.
  
  Open the destination folder where the files are extracted and run the Setup file to complete the installation.
   
  To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
   
  For more information on downloading and installing the drivers, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  I hope this helps.
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• everytime I have start watching videos sreaming they all start as they should, but later, they get real slow and it the effects of the performanced spped PC

  everytime I have start watching videos sreaming they all start as they should, but later, they get real slow and it the effects of the performanced spped PC

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what browser do you use?

  In response to the questions above could help us help you better. However, you check to see if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

• Problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  Original title: Put WET on the old computer

  When I try to use WET to transfer from old Win XP Win 7 again, I need trasfer WET to the old computer.  So I choose this option and move on to the part where it says "Select the USB flash drive where you want to save WET".  Well, in the window is the word "computer" I can't click on it, nor is the OK button light up.  What's wrong?

  Hello

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  I suggest you try the procedure described in the link and check if it helps.

  Transferring files and settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  For more information, please see the links.

  Transfer files and settings from another computer
  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Windows Easy transfer

  http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I get about one second from the previous movie when the scene selection in the menu of the DVD

  I have PE 12 for mac and have a 21.5 "iMac with 4 GB RAM and 1 TB hard drive.  I asked questions on here before all of a DV footage.

  I have a delay of 1 hour, 20 minutes and used markers to scene to go to the cinema in the timeline panel.  There are 11 movies in the video.  Markers are at the beginning of the scene in question.  On some of the later scenes, I get about one second from the previous movie before the start of the current movie.  I did thorough tests 12 EP in order get my imported correctly DV film.  I finally decided to use LifeFlix to get the imported records.  When I was testing the creation of DVD, I have not found this second of the previous film in the current issue of the film.  The problem seems to be that less pronounced during playback on my DVD than VLC Player or Apple's DVD player.  I use DVD Widescreen Dolby Preset for the DVD.  I did a DVD earlier using brands of menu with the result being 11 main menus.  I decided to abandon this approach.  Two DVDs have the same second or so of the previous clip before the current movie.

  I tried to stop markers in the DVD to recreate what I had with Pinnacle Studio, but this resulted in a DVD with a 'mistake' at the stage of decision-making case and record a DVD with menus blacks half but for the buttons.  I had added some empty frames between scenes when adding the judgment of brands, such as advised by ATR, but this failed.

  I would like to use markers to stop it again, but the problem of the second or last if a clip is more pressing.  The previous screen is sometimes less than a second and has no picture, just sound.

  Never had this problem with my old program.

  I also had "Unknown error 2131042562" when writing a normal DVD with the project and the checkbox "adjust to the content of the available space." checked.  I also got this when trying to write on a normal DVD - RW disc, to test the DVD for 'Previous film' problem as stated above.

  My burner is a USB 3 Litton Blu - ray burner.  It worked without a problem since I bought it.  I also used TDK DVD that I used for a number of years without any problems at all.  Today I wrote a data DVD without any problem.  I also wrote the content of a DVD folder on the disc, after generating an image using disk utility and it worked successfully, I realized the same DVD using the software 'Burn' successfully.

  Again, I have never had such problems in the display of the videos on DVD before.

  Your help is very appreciated.

  I managed to get a DVD with 5 images of black video between the scenes I wanted.  Video of Black made sure the brands menu worked!  Started it at the beginning of the relevant scenes.  I've never had to do this before in any program.

  Add stop markers did not.  Brands menu would go up to a point half a second or a second before the required stage, as have no black video.  I tried all sorts of things to resolve this, even to copy the project using the project archiver and the opening of the copy, but nothing helped.  I don't really know how ATR has managed to get markers to stop working.  I even added 12 frames of black video between frames with markers of the judgment at the beginning of the black video and the marker of the scene at the end.  It did not work.  I have nothing out.  The program seems to create a folder, but there is no error message and no file at the end.  He writes date folder much faster than normal when using markers of the judgment.  Also do not work 12 images of the video I think.

  I gave up at stop markers.  The normal use of the menus seems OK.  Other programs like Apple Compressor have this type of menu structure.

  Note the use of 5 images of the black video locks marks menu successfully.

• Download disappears from the download window after completion

  When I download a file from the internet in Firfeox, download window stays open as soon as the download is finished, but the file name disappears from the window. In previous versions of Firefox downloaded file would remain visible in the download window after download was complete and I could simply click on the download window and open it. Now, because it disappears from the download window, I have to open Windows Explorer and navigate to the folder that contains the newly downloaded file to open it, which is a pain. I activated the "remember my browsing and download history ' in the options as suggested in the previous answers to this question on the forum, but this makes no difference. Is it possible to make Firefox display the file in the download window after uploading?
  Thank you gas

  You are welcome

• Mixed language in the stop/restart/logout dialog and in the login window

  Since I upgraded to El Capitan my shutdown/restart/logout dialog and in the login window appears in 2 different languages. My mother tongue is Italian, but I have a message in English.

  My default language is System Preferences is Italian and that is not installed.

  Try I'have:

  In the menu bar, select

   ▹ System Preferences... ▹ Language & region

  Deselect each language unwanted from the list and click OK. Then select your region in the menu of the region.

  Close the preferences window. You may need to sign out and then sign back in before the change takes effect.

  If there is no change, reset the PRAM.

  But nothing!

  Can you help me please?

  Do you have other users accounts in your mac?

• How can I get my contacts and all the other stuff I had on the old email?

  Original title: I changed my email because they said my old email was invalid... How can I get my contacts and all the other stuff I had on the old email? They said, it has been deleted

  If my email isn't valid how I used it?

  Hello

  1. which email account you are referring to?

  2. What is the version of Windows installed on the computer? For example, Windows 7, Vista

  Please answer these questions and provide additional information so that we can better guide you.

• Is to reinstall windows and reformatting the same windows? How can I reformat windows? TQ.

  Is to reinstall windows and reformatting the same windows? How can I reformat windows? TQ.

  There are essentially two different methods to "install Windows":

  1. a clean install (which is basically all wipes) imply the shape of the disk (or partition).

  2. a repair install (which is supposed to leave all your programs and data intact) does not imply the formatting.

  Here are some useful guides:

  http://michaelstevenstech.com/cleanxpinstall.html

  http://michaelstevenstech.com/XPrepairinstall.htm