Getting the domain name of the computer Client using WebUtil

Similar Questions

• How to get the computer to boot from a USB?

  I use offline windows Defender. Start the computer to the USB you need. How can I get the computer set up to do this?

  my computer is a HP Pavilion e9100z.

  Thanks for any help

  Hello

  We will determine if your PC can not even boot from USB devices.  Plug the USB and turn on your PC.  When you get to the HP splash screen, then start typing the escape key to bring up a boot selection menu. If you do not see the USB device then your PC can't boot from a USB device.

  If your PC does support booting from a USB device and then read this MS post article.

  You always have the option to start Windows Defender from a CD or a DVD.

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• Screen BACK up when you start the computer by using Windows XP

  I did a reinstall of my OS to Windows XP.  Now, every time I turn on the computer, or restart, I get the following message appears on a black screen (BACK):

  (I use the quotes to the messages from the computer).

  "Choose the operating system to start".

  "Microsoft Windows XP Home Edition" (this option is highlighted)

  "Microsoft Windows XP Home Edition" (repeated).

  "Use the top and down arrow keys to move the selection of your choice."

  "Press ENTER to choose."

  "Seconds until highlighted choice will begin automatically."  (There's a digital countdown to 25 to zero... and the computer continues normally)

  "For advanced troubleshooting startup options and for Windows, press F8."

  If I press the key "enter", with the first option highlighted, the computer will resume as usual.  But I've never met this before start screen.

  How can I get the computer to restart normally without stopping on this screen?

  Thank you very much for your help!

  Hello

  You format the drive that had Windows XP and reinstall Windows XP on it?

  The following articles may be useful:
  To specify the default operating system for startup
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_startrecover_default_os.mspx?mfr=true

  How to edit the Boot.ini file in Windows XP
  http://support.Microsoft.com/kb/289022

• Cannot connect to a WPA - PSK with WLAN DW1520 Wireless-N particular, but can when no security is set to wireless. How can I get the card to use WPA - PSK?

  I have a DW1520 Wireless-N WLAN Half-Mini card in an Alienware M17X10. I am trying to connect my home through a TRENDNet TEW-435BRM access DSL issue in WPA - PSK.

  I was able to get the card to use the accounts wireless WPA2-PSK and WPA - PSK in other areas is not a problem directly related to WPA - PSK.

  I can get it to connect to the network when the diffuse TRENDnet without security (free release) and when directly plugged into the wireless router, cable - but every time I go to dissemination of WPA - PSK it can't connect?

  While in WPA - PSK the WLAN card can 'see' the network and wireless router can see the 'computer' (and is a 'trust machine'). I have one couple of other previous model Dells connected to the network without problem or needed changes if any ideas why I would have questions here?

  The driver installed is the 'last' to 5.60.48.35.

  I tried to restart the router and the computer without success. I use Windows Firewall.

  No bright sparks that can point me in the right direction?

  Thank you

  Declan

  Hello

  Try resetting the password in the part of the router wireless, then copy and paste it to the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Can I recover my old version of windows on the computer and use it on my old laptop?

  Original title: windows 8.

  Last year, I bought a new desktop computer Acer with windows 8 and installed my windows professional 8.1 on it!

  My question is! can I recover my old version of windows on the computer and use it on my old laptop because it was purchased with this PC AND how I to get it back?

  I am braking the rules by doing this? the original key was included with the purchase of my new Acer and I should be able to pick it up and install it on another device?

  If I can't, I'll have to buy a new one to upgrade my old windows laptop 7. I'm trying to save money! That's why I ask this question.

  Roger

  No, you cannot transfer the original license that is pre-installed on your Acer, it relates to it because it is an OEM license.

  The OEM of Windows 8 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  So, you need to invest in a new license to upgrade your laptop that is running Windows 7:

  http://www.Windows.com/buy

• get the storage you use vCloud API

  I'm trying to figure out how to get the storage you use in an organization using vCO.

  There is information about the storage profiles used to an Org - vDC, but this information contains only the limit.

  My code looks like this:

  for each (var vdc in {org.getVdcs ()})

  for each (var profile in {vdc.toAdminObject () .getStorageProfiles ())}

  System.log (Profile.ToXml ();
  

  }
  

  }

  
  

  In the XML dump I only see the limit configured for this Org - vDC but not the consumption of this limit.

  The information are present in the Web GUI vCloud, how do I get this information from a code?

  Thank you

  Cristian

  LOL, favorite of this place, it will be VERY valuable to you... now, regarding your question, this help?

  This task scriptable takes an object provider VDC as input:

  System.log("============ Provider VDC: "+providerVdc.name+" ============");
  System.log("NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'");
  var vdcs = providerVdc.getAdminVdcs();
  var host = providerVdc.getHost();
  for each (vdc in vdcs){
  System.log("====== Processing Org VDC: "+vdc.name + " ======");
  var queryService = host.getQueryService();
  var profs = vdc.getStorageProfiles();
  for each (var prof in profs) {
  var expression = new VclExpression(VclQueryAdminOrgVdcStorageProfileField.HREF, prof.getReference().href , VclExpressionType.EQUALS);
  var filter = new VclFilter(expression);
  var params = new VclQueryParams();
  params.setFilter(filter);
  var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINORGVDCSTORAGEPROFILE,params);
  
  while (resultSet != null) {
  var records = resultSet.getRecords(new VclQueryResultAdminOrgVdcStorageProfileRecord);
  //System.log(records.length + " records found");
  for each (var record in records) {
  System.log("Storage Profile Name (usedMB/allocatedMB): " + record.name + " ("+record.storageUsedMB+"/"+record.storageLimitMB+")");
  }
  resultSet = resultSet.getNextPage();
  }
  }
  System.log("");
  }
  
  // --------------------------- End code Snippet
  
  Sample output:
  [2013-03-21 12:27:03.553] [I] ============ Provider VDC: pVDC1 ============
  [2013-03-21 12:27:03.554] [I] NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'
  [2013-03-21 12:27:03.763] [I] ====== Processing Org VDC: demo ======
  [2013-03-21 12:27:03.859] [I] Storage Profile Name (usedMB/allocatedMB): Shared (0/409497)
  [2013-03-21 12:27:03.861] [I]
  [2013-03-21 12:27:03.863] [I] ====== Processing Org VDC: tiny ======
  [2013-03-21 12:27:03.959] [I] Storage Profile Name (usedMB/allocatedMB): Local (1792/6144)
  [2013-03-21 12:27:03.963] [I]
  [2013-03-21 12:27:03.965] [I] ====== Processing Org VDC: CimVDC ======
  [2013-03-21 12:27:04.016] [I] Storage Profile Name (usedMB/allocatedMB): Shared (231680/0)
  [2013-03-21 12:27:04.020] [I]
  March 21 at 12:29 pm
  

• Get the storage you use of a via powercli virutal machine

  Is there a oneliner where I can get the storage you USE a virtual machine?

  example:

  windc configured server used 100 GB 55GO

  I'd like to type something like: get - vm winDC |   Get-usedstorage

  and I want to go 55GO

  I wasn't able to find a good word

  Something like that?

  Get - VM | Select Name, UsedSpaceGB

• Why creative Cloud not connect to my account, but rather the computer I use profile?

  Why creative Cloud not connect to my account, but rather the computer I use profile?

  Sign of the cloud and sign in again using your account

• The computer I use at work is a PC. I know that you are allowed to install programs on two computers, a computer work and a laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

  I don't know if I'm in the right forum for this question, but I don't know where else to ask about installation on platforms. Thus, the computer I use at work is a PC. I know that you are allowed to install programs on two computers, a computer work and a laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

  What exactly Adobe product?

  Clouds: Yes.

  Creative Suite: No.

• After the installation, I get the message "cannot use this product under a guest account. That is what it is?

  I installed Acrobat Pro XI (academic edition).  But I get the message "cannot use this product under a guest account.  What should I do?

  Run as admin / talk to your IT Department.

  Mylenium

• How to get the computer name - forms 10g

  Hello
  
  How to get the name of the server or some other identification forms 10g Application?
  We have several servers and host load balancing redirects user to the X Server and the forms application, I have to get information from the server to which the user was redirected? Is there a way how to do?
  
  It can be the name of the server, Ip or other identifying information...
  
  Thank you.

  As the client that connects to the database is the application server

  CHE_TEST@tcp_asterix_impl> select sys_context('userenv', 'host') from dual;
  
  SYS_CONTEXT('USERENV','HOST')
  ----------------------------------------------------------------------------
  LINZ\CHE-WS
  

  Should return you the host name of your application server.

  See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions165.htm#SQLRF06117 for more information you can get with sys_context

  see you soon

• Get the Thin Client IP address

  Hello. I'm trying to find out the IP address of the machine that I use for programming. I want to use my LabVIEW program on a server. However, the string to the property intellectual VI gives the IP address of the network, so in this case the server IP address. It is a problem, as we hope, in the future, run multiple thin on program clients, if we want the program to know what thin client, it works on. However, I don't have access to the command prompt on the thin client due to administrative restrictions. This eliminates the other solution I found, which was to find the Login Windows user name (each light client has its own unique user name) through different screw which involved the command prompt. Any ideas on how to find the IP address of the customer of the Services Terminal Server Session, I believe that my computer called? Thanks for your time.

  I called and he was referred to this, which worked. We use Citrix server and the username thing worked, and we are now able to run the program for each thin client using his user name.

• Cannot get the DHCP client service to start automatically

  I work on a computer that has been recently infected with a fake AV protection virus.  The user has removed the virus using Microsoft Essentials and Malwarebytes.  Subsequently, they were unable to connect to a network with wired network cards or wireless.

  The afd.sys file has been deleted and couldn't start the DHCP client.  As soon as I restored the AFD, I was able to manually start the DHCP client.  At this point, I was able to connect to the network and get on the internet.

  The problem is that I restarted the computer and saved in Windows, the DHCP client is not automatically start as it should by the setting.  I can still go and start it manually, but it does not start by itself.

  I tried to use Winsock fix, the different netsh commands, / flushdns and enough & renew, tdsskiller and a number other programs I have come across.

  Computer is running Windows XP Service Pack 3

  Microsoft Essentials, Malwarebyes, Superantispyware and CCleaner are all installed.

  Any ideas on how to get this to start running automatically without having to do a reinstall of Windows XP?

  Thank you.

  an error saying there is no hard drive installed.

  This may mean that you have a SATA drive.  If so, you have to activate something like "legacy mode" in the BIOS before you can use the XP CD to do a reinstall (unless you have a floppy drive to add SATA drivers or integrate a CD with SATA drivers).