Getting values null to use in the calculation of data

Similar Questions

• Assignment of values to text to use in the calculation

  Hi, I have extremely limited experience script and am quite stuck trying to get something to work. Any help would be appreciated.

  I have a combo box (ComboBox1) with three other areas of text with three different Option A and Option B Options (or Option C) with numbers in them (NoBox1, NoBox2, NoBox3), I want to use to add up to a total figure.

  Yes ComboBox1 + NoBox1 + NoBox2 + NoBox3 = Total

  I want to assign a numerical value to the text options in the combo box so that I can use in the calculation. Let's say Option A = 8, B = 12 & Option Option C = 16

  Thank you

  Each combo box item can have an assigned value export, so just set it to the number, you want to use for each item. The value of exports of the selected item will become the value of the field to the drop-down list box.

  If more than one element is to use the same export value, it is best to use a different approach, so report it again if this is the case and I'll give you more information.

• Get the field to remain Virgin until the user enters the value in the previous field used in the calculation

  I work on a PDF form and am stuck on one of my calculations. There are two fields 'desired Start Date", which is a date entered by the user. The "desired end" date is one year from date entered by the user. I figured out - however, before the user enters a date, I want this field remains empty. Currently, it fills with 01/00/000. How can I get this field to calculate not unless a date is entered by the user? So far, I tried this but can not get the blank to stay:

  If the field 'Desired Start Date' is empty, leave 'to' field blank

  var myStartDate = new Date (this.getField("Desired_Effective_Date").value);

  If (((myStartDate == 0) & & (getField("myStartDate").valueAsString = "")) {event.value = "";})

  If the field "Desired Start Date" is an effective date, use the date to calculate one year after the date of entry.

  }

  else {this.getField("to").value = util.printd ("mm/dd/yyyy", new Date (myStartDate.getFullYear () + 1, myStartDate.getMonth (), myStartDate.getDate ()))}

  Try the following than the calculation script custom field "to".

  Get the value of the date field beginning

  var sStartDate = getField("Desired_Effective_Date").valueAsString;

  If the start date field is not empty...

  If {(sStartDate)

  Converts a date in a date object string

  Kai = util.scand ("mm/dd/yyyy", sStartDate);

  Add a year

  oDate.setFullYear (oDate.getFullYear () + 1);

  Set this field to the calculated date value

  Event.Value = util.printd ("mm/dd/yyyy", anyway);

  } else {}

  This field blank because the input field is empty

  Event.Value = "";

  }

  You may need to change the date format "mm/dd/yyyy", I used to match the formats of date fields.

• Calculation value that is used in the Condition of year-round

  I found that if I have a text field element in a region and I put its value in a calculation (after the region) that this element will not work in a "condition to evaluate.
  
  Text field element is FirstName. No set of default values and "always replace...". "
  Calculation (after the regions), the value as a static assignment to JOHN.
  
  There is a second computation (after Regions) for another article with a condition. The condition is "the point value to expressin 1 = value of element in the expression 2".
  First name in JOHN and expression1 in expression2.
  
  When I look at the debugging session FirstName prepares to JOHN, but the second calculation does not run.
  
  Now if I give FirstName, a default value of JOHN where the element is defined, then the second calculation runs.
  It appears to me that something different is happening with a calculated value that does not allow to use in a condition. Can anyone help.
  Thank you very much.

  Hello

  I tried to reproduce your case:

  I have a region containing two elements P6_X1 and P6_X2 (no default value and always...):
  For P6_X1, I created the static calculation (after region, sequence 1)
  For P6_X2, I created the math static (after region, order of the sequences 10) with the conditon (value of the element / column is 1 Expression = Expression 2), where Expression1 = P6_X1 and Expression2 = JOHN

  And in my case it works:

  You can see what is happening in my debug

  0.09112     0.00030     Computation point: After Box Body
  0.09142     0.00031     ...Perform computation of item: P6_X1, type=STATIC_ASSIGNMENT
  0.09173     0.00046     ...Performing static computation
  0.09219     0.00093     ...Session State: Save "P6_X1" - saving same value: "JOHN"
  0.09312     0.00031     ...Perform computation of item: P6_X2, type=STATIC_ASSIGNMENT
  0.09342     0.00039     ...Performing static computation
  0.09381     0.00038     ...Session State: Save "P6_X2" - saving same value: "LITTLE"          
  

  Have you checked the sequence of your calculation?
  What is your exact condition for the calculation? For expression2 don't you user JOHN or "JOHN"?

  Kind regards
  Aljaz

• Getting value of an element in the previous record in a table

  Good afternoon

  I'll try to explain my problem:

  I have a block table points X, Y and Z (all are elements of database)...

  On the first record, the user is required to set the values for all the elements...

  For the rest of the records, the value of X must be the value of Z in the previous record.

  How I could do and what is the best way to do it?

  Thanks in advance.

  Daniel Guzzo

  OK, problem solved by myself:

  IF: System. CURSOR_RECORD! = 1 and: global .rec_changed = 0 THEN

  : global .rec_changed: = 1;

  PREVIOUS_RECORD;

  : global .fec_hasta: = to_char(:cret_prod_pol_renovacionesb.crpn_fe_hasta,'DD-MM-YYYY');

  NEXT_RECORD;

  : global .rec_changed: = 0;

  IF: global.fec_hasta is null THEN previous_record; end if;

  : cret_prod_pol_renovacionesb.crpn_fe_efectiva: = to_date(:global.fec_hasta,'DD-MM-YYYY');

  -MESSAGE(:global.fec_hasta);

  END IF;

  If anyone has a better solution, it will be welcome.

  Thank you

• The use of the repository variable date in filter expression

  Hi gurus

  I get the error using repository variable date in filter expression. I use the formula below

  filter (with the HELP of Fact.calls"Sun Time".) ("' Fiscal months end date" = VALUEOF ("month_start"))

  I am getting below error

  The formula syntax is not valid.
  [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 22024] A comparison is performed between incompatible types. (HY000)
  Publ. SQL: SELECT filter (fact. Calls by using "Sun Time" ". Fiscal months end date"= VALUEOF ("month_start")) 'call DATA.

  Then I tried the below format I still get the error

  filter (with the HELP of Fact.calls"Sun Time".) "" Fiscal month end date "= DATE'(VALUEOF ("month_start"))") "

  The formula syntax is not valid.

  [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 46047] DateTime (VALUEOF("month_start")) (VALUEOF("month_start")) value does not match the specified format. (HY000)

  Publ. SQL: SELECT filter (using "Sun Time" Fact.Calls. ("' Fiscal months end date" = DATE '(VALUEOF ("month_start"))') 'call DATA.

  Please let me know what I'm missing or what is the correct syntax of same using the repository of date variable.

  Thanks in advance

  Concerning

  @li

  filter (with the HELP of Fact.calls"Sun Time".) ("' Fiscal months end Date" = CAST (VALUEOF ("month_start") date))

  Try this

  mark, if this can help

• Problem blackBerry Smartphones on the use of the voice and data

  Hello

  When we use the Blackberry Desktop Software for backup/restore data from one phone to another, will check voice and data usage in the session "peripheral and buyer information - status remorse" also be restored from the old phone or affected by synchronization? Or will they count just use since the first use of the new phone?

  Harold Lee

  I have to admit, I am not an expert on this subject, but that is my impression.  Once you get the new phone running, your meter would reset to zero on this phone.

• Error @XREF during its use in the calculation

  I have an XREF that retrieves data correctly (I have values for the corresponding members). The data are only XREF would be if the scenario is real, budget data are entered directly.
  
  However, in the outer cube dimension 'Months' is not the time dimension (the Invoice Date is) in the cube that contains the dimension of the month XREF is the time dimension.
  
  If I use a business rule that says fiscal value for next year, Jan = actual value of last year, Jan X Variable, then the "real value of last year, Jan' uses the function of XREF (since it queue off the coast of real-world scenario).
  
  This is when I receive an Error members (1024012) A-T-J and Jan are not in the same dimension in external reference call.
  
  I changed the XREF of Calc dynamic to the store so when you run a calc all that it store the values and no external reference would be necessary when using the BR, but then I get the error during the calc all.
  
  I am not consciously referencing Y-T-D at a point (I specifically reference Jan, for example). If I use the Excel plugin, Essbase and Jan of reference I get the correct value.
  
  Why the Y-T-D error in calculations using the XREF and what can that I do to remedy short making the size of the month in the external database, the dimension of time?

  Do you have time series dynamics?

  Try to remove it and try again...

  See you soon
  RS

• What are the different Types of domain value card (DVM) used in the SOA Suite

  Are there any 'Different Types in the domain value card' eg based on business domain (telecom finance, media, etc.) or any other technical category.

  Hello

  I'm not sure that understand your use case. If I had to stop people from edit of the composer, I would restrict their access to the composer.

  Kind regards.

• How can I get my printer to use just the color cartridge for the black & white you are exhausted?

  Whenever my on my dell printer black ink cartridge runs out, I'm generally left with a color cartridge, which is a total waste of money, because they are purchased together in a common case; is it possible that I can tell my printer to switch to the color cartridge and use that one until 'she' runs?

  I did a search for authentic cartridges, not refurbished which are cheaper, but not as reliable and these are just a few options, I found. Check the cartridge number I've seen series 2 and no 5. But whatever it is, they are there.
   
  http://www.eBay.com/Sch/i.html?_odkw=Dell+A960+series+5+genuine+ink&_osacat=0&_FROM=R40&_trksid=p2045573.M570.L1313&_nkw=Dell+A960+series++genuine+ink&_sacat=0
   
  http://www.comboink.com/Dell-A960-all-in-one-printer-ink-cartridges-s/1837.htm
   
  http://www.worldclassink.com/Dell-960-supplies-printer12868.html
   
  http://www.staples.com/A960/cat_CL161436
   
   

• create columns to use in the calculations

  Would appreciate help with this project. How to combine queries and add a 2 additional columns to store the results of calculation?
  
  In functional terms, to do the sum of the selected retirement pay for a deduction BDCA R03 code to arrive at total monthly for these deductions.
  
  In other words, the data of payroll deductions amount for 2 periods of payroll PATRICK = 21 & 22 (EMPLOYEE_AMT and EMPLOYER_AMT) and the totals in the new columns are named EENOVR03 and ERNOVR03. Column names EA representative for employee, ER for the employer, for November NOV and R03 for deduction code.
  
  Thanks to all those who can help you.
  
  This is the SQL base without calculations. I need to change SQL to produce the EENOVR03 and the ERNOVR03.
  
  Select SPRIDEN. SPRIDEN_LAST_NAME "LastName."
  SPRIDEN. SPRIDEN_FIRST_NAME "FirstName."
  SPRIDEN. SPRIDEN_MI "MiddleName",.
  SPRIDEN. "CWID SPRIDEN_ID."
  PHRDEDN. PHRDEDN_YEAR 'year ',.
  PHRDEDN. PHRDEDN_BDCA_CODE "DedCode"
  PHRDEDN. PHRDEDN_PAYNO "PayrollNo"
  PHRDEDN. PHRDEDN_EMPLOYEE_AMT "EE21R03"
  PHRDEDN. PHRDEDN_EMPLOYER_AMT "ER21R03".
  of payroll. PHRDEDN PHRDEDN,
  SATURN. SPRIDEN SPRIDEN
  where SPRIDEN. SPRIDEN_PIDM = PHRDEDN. PHRDEDN_PIDM
  and PHRDEDN. PHRDEDN_YEAR = '2011'
  and PHRDEDN. PHRDEDN_PAYNO = '21'
  and PHRDEDN. PHRDEDN_BDCA_CODE = "R03".
  
  Above SQL
  Lines of John Doe:
  
  YEAR PATRICK BDCA EEAMT ERAMT
  
  2011 21 R03 100 150
  2011 22 R03 130 200
  
  Result would be:
  
  NAME = John A. Doe
  ID 1234
  YEAR 2011
  EE21R03 100
  EE22R03 130
  EENOVR03 230
  ER21R03 150
  ER22R03 200
  ERNOVR03 350
  
  Published by: Rowena December 4, 2011 06:42
  
  Published by: Rowena December 4, 2011 06:49

  This looks like a hub for me. One way is:

  select spriden.spriden_last_name "LastName",
         spriden.spriden_first_name "FirstName",
         spriden.spriden_mi "MiddleName", spriden.spriden_id "CWID",
         phrdedn.phrdedn_year "Year",
         sum(case when phrdedn.phrdedn_payno = '21'
                    then phrdedn.phrdedn_employee_amt end) "EE21R03",
         sum(case when phrdedn.phrdedn_payno = '21'
                    then phrdedn.phrdedn_employer_amt end) "ER21R03",
         sum(case when phrdedn.phrdedn_payno = '22'
                    then phrdedn.phrdedn_employee_amt end) "EE22R03",
         sum(case when phrdedn.phrdedn_payno = '22'
                    then phrdedn.phrdedn_employer_amt end) "ER22R03",
         sum(phrdedn.phrdedn_employee_amt) EENOVR03,
         sum(phrdedn.phrdedn_employer_amt) ERNOVR03
  from payroll.phrdedn phrdedn, saturn.spriden spriden
  where spriden.spriden_pidm = phrdedn.phrdedn_pidm
    and phrdedn.phrdedn_year = '2011'
    and phrdedn.phrdedn_payno IN ('21', '22')
    and phrdedn.phrdedn_bdca_code = 'R03'
  group by spriden.spriden_last_name, spriden.spriden_first_name,
           spriden.spriden_mi, spriden.spriden_id, phrdedn.phrdedn_year
  

  John

• using outer joins if the two column is null? Use only (+)

  Hi all

  create the table xxc_tr_num (tl_number number, tr_no number tl_no_id);

  insert into xxc_tr_num values (123,100,222);

  insert into xxc_tr_num values (124,100,333);

  create the table xxc_od_tab (tl_number number, tl_id number);

  insert into xxc_od_tab values (123,001);

  insert into xxc_od_tab values (null, null);

  create table xxc_oth_tab (name varchar2 (10), number of tl_id);

  insert into xxc_oth_tab values('abc',,001);

  insert into xxc_oth_tab values (null, null);

  Wait it out put

  tr_no tl_no_id name

  100 222 abc

  100 333

  using outer joins if the two column is null? use only please of outer joins

  And I tried to use outer joins on both tl_id column but not get values and I use have County (tr_no ) > 1

  Rajesh123 wrote:

  Thank you Kiss it is not possible to use having clause?

  You need to understand the functioning of the group. If you will not be asked this question.

  Check this box

  SQL> select tr_no,
    2         tl_no_id,
    3         count(*)
    4    from xxc_tr_num a,
    5         xxc_od_tab b,
    6         xxc_oth_tab c
    7   where a.tl_number = b.tl_number(+)
    8     and b.tl_id = c.tl_id(+)
    9   group
   10      by tr_no
   11       , tl_no_id;
  
       TR_NO   TL_NO_ID   COUNT(*)
  ---------- ---------- ----------
         100        333          1
         100        222          1
  

  See what returns the count? You have grouped according to TR_NO and TL_NO_ID. You must take into consideration the TL_NO_ID just put COUNT (TR_NO) does not increase the NUMBER of the whole group. To get the NUMBER on the whole group, I used the analytical function and did. Like this, see the number of the analytical function here

  SQL> select tr_no,
    2         tl_no_id,
    3         count(*),
    4         count(*) over(partition by tr_no)
    5    from xxc_tr_num a,
    6         xxc_od_tab b,
    7         xxc_oth_tab c
    8   where a.tl_number = b.tl_number(+)
    9     and b.tl_id = c.tl_id(+)
   10   group
   11      by tr_no
   12       , tl_no_id;
  
       TR_NO   TL_NO_ID   COUNT(*) COUNT(*)OVER(PARTITIONBYTR_NO)
  ---------- ---------- ---------- ------------------------------
         100        222          1                              2
         100        333          1                              2
  

  So to answer your question, yes you can't do in the HAVING clause...

• strange results in the calculation

  Hello
  
  I need another pair of eyes, or maybe another brain here: a miniature of a large area, I want to calculate the position of an object from the position in the big screen. The calculation is
  original pos / large size of the area * size small area
  I think it should be good to get the relative position in the small screen.
  However, Flash comes up with some strange results:
  (20 + 5000) / (2 * 5000) * 119 = 2439.5
  This should result in 59.738 for this calculation. The code for this looks like this:
  
  OMC._x = (omc.x + this.controlr.MAX) / (2 * this.controlr.MAX) * this.display.width;
  
  where omc.x is the x position in the big screen (here 20), MAX is 5000, 2 * MAX is the full size (the point 0,0 is in the Middle, so he has 10000 big), and the small screen is display.width.
  Values seem to be right; the calculation above (20 + 5000...) has been traced from the code. However, the result is totally wrong, and I have no idea why. Any ideas on that?
  
  
  blemmo

  Oh... just realized the numbers came as strings... so it all seemed well in the trace, but calculation of strings with numbers is not very accurate...

  Heck... I remember using the debugger more often.

  see you soon,
  blemmo

• How to disable the warning of validation on the calculation (read-only) field in the table

  Is it possible to add a line in a calculation script (JavaScript) that prevents a dialog box of a calculation field validation?

  Scenario:

  • Working with fields in a table inserted.
  • In each line, I have a couple of fields that the user has entered. These fields have a Validation model has allowed that the user must enter the data correctly.
  • There is a calculated field based on the data entered by the users. It is this field that throws a warning dialog box "the value entered for Total_Row1 is not valid. "To ignore the validations for Total_Row1, click on ignore.

  Even if I turn off the Model Validation on fields used for the calculation of the warning dialog box always appears. So, it seems to be isolated in the field of computing.

  The calculation area displays the time and I got it originally set as a Date/time field, but also tried to use a text field (as the calculation should appear as 0:45 for 45 minutes in this area).

  I have a suspicion that the warning appears only because I used an array for formatting fields, as I used similar validation profiles and other calculation fields and see not the message when the fields do not appear inside the table.

  I think of easier workaround would be to disable validation for this particular calculation field, but I have no idea how the script that. Any help appreciated lot.

  CARI

  I discovered the problem.  In a word: it was a mistake by naming the fields.

  • I have fields named with line numbers in the field name (for example FieldName_Row1).
  • and fields calls with FieldName_Row1.formattedVallue must have triggered some confusion.

  As soon as I removed the word 'Row' of file names, the question of the warning dialog validation mystery Adobe Acrobat for the calculation field have disappeared.

  Ago about 3-4 hours of my life that I won't be back... ha - ha but if someone else has the problem, I thought I better share my discoveries

• I'm figuring (add) a column on a PDF form and on the calculation tab, it doesn't let me select (check) the fields I want to calucalate.  It won't let me type in the fields of the box either.

  I'm figuring the shape (add) a column (sum) on a pdf file and on the calculation tab, it won't let me select (check) the fields I want to use in the calculation.  It won't let me type fields in the box either.  I'm doing something wrong?

  the mouse click on the name of the field and press the space key