Assignment of values to text to use in the calculation
Hi, I have extremely limited experience script and am quite stuck trying to get something to work. Any help would be appreciated. I have a combo box (ComboBox1) with three other areas of text with three different Option A and Option B Options (or Option C) with numbers in them (NoBox1, NoBox2, NoBox3), I want to use to add up to a total figure. Yes ComboBox1 + NoBox1 + NoBox2 + NoBox3 = Total I want to assign a numerical value to the text options in the combo box so that I can use in the calculation. Let's say Option A = 8, B = 12 & Option Option C = 16 Thank you
Each combo box item can have an assigned value export, so just set it to the number, you want to use for each item. The value of exports of the selected item will become the value of the field to the drop-down list box.
If more than one element is to use the same export value, it is best to use a different approach, so report it again if this is the case and I'll give you more information.
Tags: Acrobat
Similar Questions
-
Assign a value based on a condition of the varaible
How can I assign a conditional numeric value to a variable based on the value of an xml tag. That is if she is 'company A' give it 12 if it is 'company B' 17. Also be able to use this value later in the model.
Thanks in advanceUse this:
To retrieve and print its value later in the model simply put:
It is documented here:
http://download.Oracle.com/docs/CD/E12844_01/doc/BIP.1013/e12187/T421739T481157.htm#4535390
Please spend some time to read the documentation for it.
concerning
Jorge
-
Getting values null to use in the calculation of data
Hey guys, I'm trying to "capture" a zero reading before starting the measurement of my data. I have 4 analog channels that are run continuously thanks to a producer/consumer architecture. I want to press the button 'Start', and hold the most recent value for these 4 channels to calculate certain conditions later in my code. Is there a way to do this without the help of local variables?
Hi glskinner,
When you are unsure about the use of the shift register, you should take online courses available on NI.com.
See this:
-
I work on a PDF form and am stuck on one of my calculations. There are two fields 'desired Start Date", which is a date entered by the user. The "desired end" date is one year from date entered by the user. I figured out - however, before the user enters a date, I want this field remains empty. Currently, it fills with 01/00/000. How can I get this field to calculate not unless a date is entered by the user? So far, I tried this but can not get the blank to stay:
If the field 'Desired Start Date' is empty, leave 'to' field blank
var myStartDate = new Date (this.getField("Desired_Effective_Date").value);
If (((myStartDate == 0) & & (getField("myStartDate").valueAsString = "")) {event.value = "";})
If the field "Desired Start Date" is an effective date, use the date to calculate one year after the date of entry.
}
else {this.getField("to").value = util.printd ("mm/dd/yyyy", new Date (myStartDate.getFullYear () + 1, myStartDate.getMonth (), myStartDate.getDate ()))}
Try the following than the calculation script custom field "to".
Get the value of the date field beginning
var sStartDate = getField("Desired_Effective_Date").valueAsString;
If the start date field is not empty...
If {(sStartDate)
Converts a date in a date object string
Kai = util.scand ("mm/dd/yyyy", sStartDate);
Add a year
oDate.setFullYear (oDate.getFullYear () + 1);
Set this field to the calculated date value
Event.Value = util.printd ("mm/dd/yyyy", anyway);
} else {}
This field blank because the input field is empty
Event.Value = "";
}
You may need to change the date format "mm/dd/yyyy", I used to match the formats of date fields.
-
Conditional display in the text box based on the calculated value
Hello
I have radio buttons that each have a numerical value. For example = 1 A = 2 C = 0. In the example below, the total is equal to 5.
The sum is displayed at the bottom of the document and is passed to another text box:
Instead of '5' displayed in the text box on the right, it should display a "Control" Word like this:
The displayed word is based on the totals through this range:
1-2 = 'absorbing '.
3-4 = 'practitioner '.
5 to 6 = "control".
The script I used to pass the value from the left to the right text box in the chart above is:
name of the field to text box;
var cTextBox = 'Cabinet Talent strategy knowledge - total';
get the value of the field with the name in cTextBox;
var sTextBox = this.getField ("cTextBox") .value;
Set the value of this field;
Event.Value = sTextBox;
That I need to add to this script to show one of the words, such as "control" above?
I am a complete novice to scripting. I found the above script online and somehow got it to work.
I thank very much for any help or pointers, you can provide.
Best regards
Sorry, there were some errors in the code that I provided above. Try this:
If (sTextBox > = 1 & sTextBox)<= 2)="">=>
Event.Value = "absorbing";
} ElseIf (sTextBox > = 3 & sTextBox)<= 4)="">=>
Event.Value = "practitioner";
} ElseIf (sTextBox > = 5 & sTextBox)<= 6)="">=>
Event.Value = "master";
} else {}
Event.Value = "";
}
If it still does not respond, you can send me the file at [email protected] and I'll check...
-
How to assign a value of string comman separated in the Clause of SELECT m
In table A, I followed values
Price ID
-- ------
1 100
2,200
3 300
4 400
6 500
Now, in table B, I have following values
Product price combi
--------- ----- --------
OIL 600 '1', ' 2 ', 3'
What I do is, first of all get the combi in table B value and then get the count of the table has.
In condition, it should return 3...
create or replace procedure amit_combi_test
as
v_combi varchar2 (100);
tot_row number (10);
cursor table_combi is
Select combi
b;
BEGIN
OPEN table_combi.
LOOP
EXTRACT the table_combi in v_combi;
EXIT WHEN table_combi % NOTFOUND;
dbms_output.put_line (v_combi);
Select count (1) INTO tot_row
a.
WHERE ID in (v_combi);
dbms_output.put_line (to_char (tot_row));
END LOOP;
CLOSE Table_combi;
END;
But the problem is... it shows the value of the variable tot_row = 0; It should come 3...ace_friends22 wrote:
Thank you all, but it seems regexp_ functions and xmltable are not available in Oracle 9.2... I tried to use it, but it says invalid identifier......So why it is always a good idea to display the version of your database with your question, especially if you use a version not supported by the database, otherwise we have to assume that you use one of the latest versions supported. This saves also we are wasting our time.
-
Access the value of text column header inside the loop forEach to a dynamic table: ADF 11 g
JDeveloper: 11.1.2.1.0
We have a requirement in which a dynamic array must be created. We are able to create the table. But we need the values for the dynamic to be columns the same as the name of the column.
We have written the following code. Column header is is filled correctly. But the outputText (i.e. the column values for each row are coming as null.
< af:forEach items = "#{backingBeanScope.backing_ReportsInterfaceBean.tableList}" var = "dynamicColumn" > "
< af:column sortable = "false" headerText = "#{dynamicColumn}" id = "c3dwd" >
< af:outputText value = "#{dynamicColumn}" id = "aot1" > < / af:outputText >
< / af:column >
< / af:forEach >
We are stuck
Emergency aid is much appreciated!
Hi Ashish,
Its a dynamic array. We had to access the column header.
I've solved through hit and trial. If I change the bean has been prominently worn rather than extensive backup of bean, it works. I don't know what is the reason for this, but now it works.
Thank you all.
-
How to assign a value to an attribute column in the table in the ADF
Hi all
BindingContext ctx = BindingContext.getCurrent ();
DCBindingContainer bc = (DCBindingContainer) ctx.getCurrentBindingsEntry ();
Iterator DCIteratorBinding = bc.findIteratorBinding ("StudentVO1Iterator");
Line r = iterator.getCurrentRow ();
FacesContext facesContext = FacesContext.getCurrentInstance ();
Application app = facesContext.getApplication ();
ExpressionFactory elFactory = app.getExpressionFactory ();
ELContext elContext = facesContext.getELContext ();
ValueExpression valueExp =
elFactory.createValueExpression (elContext, "#{data.") StudentAMDataControl.dataProvider} "(,Object.class);"
AMEST StudentAMImpl = (StudentAMImpl) valueExp.getValue (elContext);
String newno = amest.getEstNoGenerate ();
System.out.println ("new number" + newno);
r.setAttribute ("StudentNo", newno);
BindingContext ctxdet = BindingContext.getCurrent ();
DCBindingContainer bcdet = (DCBindingContainer) ctxdet.getCurrentBindingsEntry ();
DCIteratorBinding iterdet = bcdet.findIteratorBinding("StudentDetailVO1Iterator");
Line rdet = iterdet.getCurrentRow ();
System.out.println ("row" + rdet); print null
rdet.setAttribute ("DtlStudentNo", newno);
in code above my header part can affect return value, but the level of detail, it cannot affect. which shows nullpointer exception. because the Row rdet object become null. Why does this happen? it comes out when I press a button.
I code in backing bean Tin and running on the commercial version of jdeveloper 11g 2...
help jumping... anyone who knows...
Thank you.A good starting point are the docs (http://docs.oracle.com/cd/E28280_01/web.1111/b31974/bcentities.htm#sm0126).
Example http://dstas.blogspot.de/2011/10/master-detail-data-presentation-and.htmlTimo
-
Display lines without values in a table (using only the answers, 10g)
Hi gurus, I tried bumping the blank in a PivotTable , but since it s beating Pavilion 'responded' it probably won´t get any attention :) That solution seems good, but I get the error message "[nQSError: 10058] a general error has occurred." [nQSError: 22027] Union of incompatible types. (HY000) "when practice columns
My problem is that when a line in a dimension has no value it does not show. Often, it's good, but my requirement is that, even if she hasn´t got the values it should show:
For example
Total sales:
Sweden, 1234
Norway, 4321
Denmark, 1111
Sales - ice hockey clubs
Sweden, 1234
Norway, -.
Denmark--
OBIEE normally removes the Norway and the Denmark in this case, but I want that all the regions to show all the time.
Thanks in advanceOkay, now that you have validated your code, I would have been able to help, but you figured out where is the incompatibility. So now that you know the method works, you can mark this 'proper' and others who seek the same solution can benefit as well.
Thanks and good luck!
-
Error @XREF during its use in the calculation
I have an XREF that retrieves data correctly (I have values for the corresponding members). The data are only XREF would be if the scenario is real, budget data are entered directly.
However, in the outer cube dimension 'Months' is not the time dimension (the Invoice Date is) in the cube that contains the dimension of the month XREF is the time dimension.
If I use a business rule that says fiscal value for next year, Jan = actual value of last year, Jan X Variable, then the "real value of last year, Jan' uses the function of XREF (since it queue off the coast of real-world scenario).
This is when I receive an Error members (1024012) A-T-J and Jan are not in the same dimension in external reference call.
I changed the XREF of Calc dynamic to the store so when you run a calc all that it store the values and no external reference would be necessary when using the BR, but then I get the error during the calc all.
I am not consciously referencing Y-T-D at a point (I specifically reference Jan, for example). If I use the Excel plugin, Essbase and Jan of reference I get the correct value.
Why the Y-T-D error in calculations using the XREF and what can that I do to remedy short making the size of the month in the external database, the dimension of time?Do you have time series dynamics?
Try to remove it and try again...
See you soon
RS -
create columns to use in the calculations
Would appreciate help with this project. How to combine queries and add a 2 additional columns to store the results of calculation?
In functional terms, to do the sum of the selected retirement pay for a deduction BDCA R03 code to arrive at total monthly for these deductions.
In other words, the data of payroll deductions amount for 2 periods of payroll PATRICK = 21 & 22 (EMPLOYEE_AMT and EMPLOYER_AMT) and the totals in the new columns are named EENOVR03 and ERNOVR03. Column names EA representative for employee, ER for the employer, for November NOV and R03 for deduction code.
Thanks to all those who can help you.
This is the SQL base without calculations. I need to change SQL to produce the EENOVR03 and the ERNOVR03.
Select SPRIDEN. SPRIDEN_LAST_NAME "LastName."
SPRIDEN. SPRIDEN_FIRST_NAME "FirstName."
SPRIDEN. SPRIDEN_MI "MiddleName",.
SPRIDEN. "CWID SPRIDEN_ID."
PHRDEDN. PHRDEDN_YEAR 'year ',.
PHRDEDN. PHRDEDN_BDCA_CODE "DedCode"
PHRDEDN. PHRDEDN_PAYNO "PayrollNo"
PHRDEDN. PHRDEDN_EMPLOYEE_AMT "EE21R03"
PHRDEDN. PHRDEDN_EMPLOYER_AMT "ER21R03".
of payroll. PHRDEDN PHRDEDN,
SATURN. SPRIDEN SPRIDEN
where SPRIDEN. SPRIDEN_PIDM = PHRDEDN. PHRDEDN_PIDM
and PHRDEDN. PHRDEDN_YEAR = '2011'
and PHRDEDN. PHRDEDN_PAYNO = '21'
and PHRDEDN. PHRDEDN_BDCA_CODE = "R03".
Above SQL
Lines of John Doe:
YEAR PATRICK BDCA EEAMT ERAMT
2011 21 R03 100 150
2011 22 R03 130 200
Result would be:
NAME = John A. Doe
ID 1234
YEAR 2011
EE21R03 100
EE22R03 130
EENOVR03 230
ER21R03 150
ER22R03 200
ERNOVR03 350
Published by: Rowena December 4, 2011 06:42
Published by: Rowena December 4, 2011 06:49This looks like a hub for me. One way is:
select spriden.spriden_last_name "LastName", spriden.spriden_first_name "FirstName", spriden.spriden_mi "MiddleName", spriden.spriden_id "CWID", phrdedn.phrdedn_year "Year", sum(case when phrdedn.phrdedn_payno = '21' then phrdedn.phrdedn_employee_amt end) "EE21R03", sum(case when phrdedn.phrdedn_payno = '21' then phrdedn.phrdedn_employer_amt end) "ER21R03", sum(case when phrdedn.phrdedn_payno = '22' then phrdedn.phrdedn_employee_amt end) "EE22R03", sum(case when phrdedn.phrdedn_payno = '22' then phrdedn.phrdedn_employer_amt end) "ER22R03", sum(phrdedn.phrdedn_employee_amt) EENOVR03, sum(phrdedn.phrdedn_employer_amt) ERNOVR03 from payroll.phrdedn phrdedn, saturn.spriden spriden where spriden.spriden_pidm = phrdedn.phrdedn_pidm and phrdedn.phrdedn_year = '2011' and phrdedn.phrdedn_payno IN ('21', '22') and phrdedn.phrdedn_bdca_code = 'R03' group by spriden.spriden_last_name, spriden.spriden_first_name, spriden.spriden_mi, spriden.spriden_id, phrdedn.phrdedn_year
John
-
Business rule - unable to name the text data using substitution variables
Hello
I can't assign a value of text stored in a variable substitution. I read the posts that you can't assign string values I just want to check if it was possible using substitution variables.
For example.,.
Trouble (scenario, Version and year)
"Test year".
(
"Test year" = &;
);
EndFix
& those is a substitution variable whose value is "FY13.
Please advice.
Thanks, CzThe same rules apply, you must apply a numerical value, because this is what is stored in essbase data compared to the intersection.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Error ESTK "cannot assign a value.
Dear friends, started a new project - and of course the new problems:.
The SumOf (list of values) function works perfectly,
but an equivalent of the function VsumOf (list of variables) stops at line 16 in the first iteration of the loop: cannot assign a value.
At this point, the result variable is just - 132.09 - out sort of a numerical problem.
var z = SumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); alert ("SumOf the numbers = " + z); // giving 166.610000014305 (figures after the 000 are artifacts) var z = VsumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); alert ("VsumOf the numbers = " + z); function VsumOf (valuePairs) { var nArguments = arguments.length; var j, z, result = 0; if (Math.floor(nArguments/2) * 2 !== nArguments) {return undefined;} for (j = 0; j < nArguments; j=++2) { if (isNaN(arguments[j])) {return NaN;} // should be skipped in calling environment if (isNaN(arguments[j+1])) {return NaN;} z = arguments[j] * arguments[j+1]; result = result + z; // <<== Can not assign value ??? } return result; } // this one works correctly function SumOf (values) { var nArguments = arguments.length; var j, result= 0; for (j = 0; j < nArguments; j++) { if (isNaN(arguments[j])) {return NaN;} // should be skipped in calling environment result = result + arguments[j]; } return result; }
Any ideas what really does this error message mean?
Hi Klaus,
Just change your line 12 for
for (j = 0; j< narguments;="" j="j+2)" {=""> It should work.
-
Who join use in the situation below?
Hello
I have 2 tables with structures like below
Table:-Machine
(machinename char (5),
MachineId char (6),
date StartTime,
end date,
quantity)
Table:-stop
MachineId char (6),
date of shutdowntime,
shutdownmins char (5)
What I want to do, is change machine starting and endtimes table according to the table to stop stops.
Basically I will be leading table having structures like the machine table with just the difference in time of start and end according to the cases.
Means that I will have a query select selection of fields that from the machine table table stop but will only be used for the calculations of time change.
I am little confused here what join to use or have any other way to solve this problem.
I need select only query response.
Experts help me!
Thank you
Mahesh>
So basically I will not need to select any since the closure just for the calculation
>
Well, which makes no sense.
The only way that you can use "shutdown" calculation is to choose in this one.That's what Salomon showing you; How to select the data that you need it and do the math.
-
assign a value to a text element using the PL/SQL function body
Hello
I want to assign a value to a text element using PL/SQL function body option in the Source elements. But the below error when I try to apply it.
Source code:
declare
name varchar2 (100);
Start
If v ("P3_CREHIDD") = 'Edit' then
Select ename in the name of cpy_emp where empno = v('P3_EMPNO2');
end if;
end;
ERR-1904 unable to calculate the default item: type = computation_type = function body declare name varchar2 (100); so start v ('P3_CREHIDD') = 'Edit' and then select ename in the name of cpy_emp where empno = v('P3_EMPNO2'); end if; end;.
Thank you
David.Hello
Your body of the function doesn't return anything.
Maybe it worksdeclare l_name varchar2(100); begin if v('P3_CREHIDD') = 'Edit' then select ename into l_name from cpy_emp where empno = v('P3_EMPNO2'); end if; RETURN l_name; end;
BR, Jari
Maybe you are looking for
-
When I search using the address field, I am is more directed directly on the site I look for ex-BBC, as I was before. Instead Google web page appears with a list of proposals, and I have to click on the link to the BBC it to get on the site. Ways you
-
I would like that because when I open a new tab, it opens a blank page. More often, I want a tab to provide a new research process, and to the far right of the screen when the new tab is activated on the left side of the screen seems disjointed.
-
Protocol GPS in Toshiba NB100 12 H
Hello!I have computer Toshiba NB100 12 H. My Manifold GIS program can recognize the version 2 NMEA protocol, but cannot recognize this Toshiba GPS. Someone knows what kind of version with GPS NMEA protocol in my computer. Thanks, Matjaz
-
I am more able to share a piece of garageband on iTunes
I'm Impossible to send the song (share) a garageband to iTunes. I select actions, and the process hangs at the stage of conversion, which goes and until what I force quit garageband as the only way out. It is a new problem of the band. I have garageb
-
Support for non-EXISTENT slate TPT
It's amazing the number of negative threads I have seen/created myself regarding slate TPT and Lenovo has not yet responded to any of them. I never thought I'd be THAT disappointed by Lenovo. You guys have always exceeded my expectations, but when it