GFX.font_rendering. DirectWrite.Enabled is set to false, but continues to use directx

Similar Questions

• I'm having a problem with Firefox nightly since the 28.0a1 update (2013-11-19). By browser.tabs.OnTop configuration is set to false, but the notches are on top. Help?

  Everything was working fine until today. I don't like having tabs on top, and I would like to have in the classic position of firefox, as many people as well.

  I hope you'll solve the problem with the next update.

  You can watch this extension:

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/

  You can set "Tabs not on top" in the options for the extension on the subject: addons page.

• How to set master password, but do not use it whenever I log on

  I am trying to set master password for administrator, but I don't want to type it every time that I log on computer that Suggestions would be greatly appreciated.

  Hi sangeez2005

   

  It is not possible to have a master password for which you can have a choice. You can have a single specific to a password account you will need to provide or enter it each time you connect to this account.

   

  I hope this helps.

• Videos YouTube does NOT play if media.mediasource.enabled is set to true (Youtube with HTML 5 Player). WHY?

  When you watch videos on Youtube, I use the new HTML 5 player. It works fine when media.mediasource.enabled is set to 'false', but then I can't have the full experience because that lack of features!

  If I let no. video will load, which means that I can't watch any video on Youtube!
  As a solution, I installed the Plugin "Youtube Control Center" (missing in the list below). But it would be nice if I don't use this...

  Even better would be if Firefox would be supported WebM. But this doesn't seem to be the case since YT uses exactly this Format with its new player... (And if I activate this media.mediasource.enabled (put "true") nothing works more.)

  Firefox plays the 'old' WebM format in its default configuration (media.mediasource.enabled = false). You can check it out here: http://www.webmfiles.org/demo-files/.

  What I've read, turn on MediaSource will allow you to play the "new" WebM on YouTube from Firefox 31. Even if preference exists in Firefox 30, I don't think that the actual code is there, which would explain why this ability to YouTube advertising causes the blackout.

  See: http://www.ghacks.net/2014/05/10/enable-media-source-extensions-firefox/

• How can I move my tabs down? browser.tabs.onTop is already set to "false".

  I followed the instructions in the help on this article, but when I got to browser.tabs.onTop, it has already been set to "false". So I tried to put it on true, but there was no change. Go back, it was again set to false, but my tabs are always on top. Please help - it is a problem for me!

  If you miss the module bar and the tabs on the bottom option, you can certainly do with extensions!

  • https://addons.Mozilla.org/en-us/Firefox/addon/the-addon-bar
  • https://addons.Mozilla.org/en-us/Firefox/addon/tabs-on-bottom/

• Media.Windows - Media - foundation.enabled set to false does not stop the MP3 files to play rather than the economy. I want my file save instead of the rear. How?

  I used to be able to click on the MP3 files and they would save, according to the setting in my Options. Now when I click on a link to an MP3 file, it goes to a player page, I don't want to.

  I looked through the help here, and it is proposed to amend media.windows - media - foundation.enabled to false. I did, and it made no difference. (Restart after making the change did not help either.)

  I use version 26.0 in Windows XP. I had not downloaded MP3s since July, so I don't know which version this started.

  Windows XP uses Media Foundation, it uses DirectShow (DirectX). To turn it off, it was a different preference:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste media and make a pause so that the list is filtered

  (3) double-click the preference media.directshow.enabled from true to false.

  I don't know if this changes enter into force immediately or after you exit and then restart Firefox.

• What does it mean when accessibility.delay_plugins is set to false?

  I keep having problems with Flash player crashing in Firefox, while Zynga Games. I have the latest version of Firefox, Flash Player, plugins have been reset: I jumped through all the hoops and continue to have problems. I realize realize that games Zynga race very slowly so I decided to start tweaking timeouts in Firefox. What does it mean exactly when the accessibility.delay_plugins parameter is set to false? Is - average access delay is disabled by default?

  See the comments in this file:

  • http://MXR.Mozilla.org/Mozilla-release/source/modules/libpref/init/all.js#723

  722 #ifdef XP_WIN
  723 // Some accessibility tools poke at windows in the plugin process during setup
  724 // which can cause hangs.  To hack around this set accessibility.delay_plugins
  725 // to true, you can also try increasing accessibility.delay_plugin_time if your
  726 // machine is slow and you still experience hangs.
  727 // See bug 781791.
  728 pref("accessibility.delay_plugins", false);
  729 pref("accessibility.delay_plugin_time", 10000);
  730 #endif

• Why security.ssl3.dhe_dss_aes_256_sha is set to 'false' on Firefox 33.0?

  I just noticed that on Firefox 33.0 release (WinXP 32-bit home), the security.ssl3.dhe_dss_aes_256_sha is set to "false" by default. But not the releated more low security.ssl3.dhe_dss_aes_128_sha, which is still to 'true '.

  It must have happened on one of the latest versions.

  Why was the old disabled?

  See this bug for more details report:

  • bug 1036765 - Disable cipher suites that are not in the proposal of "Suite of encryption in the browser" which are always activated

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• The value of browser.urlbar.autoFill is always set to false whenever I restart Firefox 28

  The value of browser.urlbar.autoFill is always set to false whenever I restart Firefox 28.
  I go to about: config and change the value 'true' but, after restarting Firefox it return false, so I can not AutoComplete URLS

  Note that your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.

  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
  You can check its contents with a text editor (right click: open with) If you do not create this file yourself.

  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can delete a possible user.js file and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved

• How can I set _gby_hash_aggregation_enabled = FALSE in 11 GR 2

  Hello
  I am tiring to define together gbyhash_aggregation_enabled = FALSE in my new 11 GR 2 instance using the:
  
  ALTER system set gbyhash_aggregation_enabled is false scope = spfile;.
  
  And I get this:
  
  ALTER system set gbyhash_aggregation_enabled = false scope = spfile
  *
  ERROR on line 1:
  ORA-00911: invalid character

  change the system '_gby_hash_aggregation_enabled' = false;

• JBO.ampool.doampooling set to false during execution.

  Hello everyone,
  
  Is it possible to set the configuration property jbo.ampool.doampooling set to false at run time?
  If possible, how can I do?
  
  Thanks in advance.

  See the section * 40.2.4 how to value Configuration properties programmatically * in
  http://download.Oracle.com/docs/CD/E12839_01/Web.1111/b31974/bcampool.htm#sm0301

  Thank you
  Nini

• TextArea and DateField in DataGrid editable after that 'editable' set to 'false '.

  I have a DataGrid, and although I have set the 'editable' DataGrid 'false' field and also put the field 'editable' 'false', the DateFields and the text box columns are always editable. Someone knows why?

  <mx:DataGrid id="touchpointDG" dataProvider="{contactTouchpointsXLC}" width="100%"
  alternatingItemColors="[0x80BDE0, 0xD2F5E9]" rowHeight="25" editable="false">
  <mx:columns>
    <mx:DataGridColumn dataField="touchpointDate" headerText="Date" 
      itemRenderer="components.DateFieldXML" width="100" editable="false"/>
    <mx:DataGridColumn dataField="touchpointType" headerText="Type" width="170"/>
    <mx:DataGridColumn dataField="touchpointResult" headerText="Result" width="120"/>
    <mx:DataGridColumn dataField="touchpointNextAction" headerText="Next Action" width="205"/>
    <mx:DataGridColumn dataField="touchpointNextActionDate" headerText="Next Date" 
      itemRenderer="components.DateFieldXML" width="100" editable="false"/>
    <mx:DataGridColumn dataField="touchpointDetails" editable="false" 
      headerText="Touchpoint Details" itemRenderer="mx.controls.TextArea"/>
  </mx:columns>
  </mx:DataGrid>
  
  

  It only determines if the DG opens an editing session.  It is not actually set editable = false on the component.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• 'Check if set to True, then continue' - how to implement?

  Hello community LV.

  I am creating a VI that checks if a certain condition (in this case, only the wavelength that is off my monochromator is the correct value) is set to true, then continues and takes the action. I tried to use a combination of a business structure and a timed sequence (see screenshot - I'm an autodidact and a newbie so sorry if it's a stylistic disaster), but the case structure requires that there is an entry from the case 'false' in the tunnel. Just that he do nothing if the case is false - I want all "false" entries would be added to elements of the table 'sum' and spoil my data (right?), so I don't want that.

  Thank you!

  If you expect something to be true, it means that you must keep a loop and test the condition until it happens.

  Heard that you work with an engine displacement and a series of steps that involve certain expectations between the two, it looks like you should develop a "state machine" architecture  Search the forums on this topic.  There is even a model for him in LabVIEW.

  A state machine allows a sequence of events occur, but you build in intelligence, so that he will know when to switch to the next step, or when to return to the stage even (for example to measure something and check the new State), or maybe even go back to an earlier stage.

  I see that you have potential competitive conditions in your current code of how you use local variables.  In the loop just For, you're current wavelength reading in 3 different places and write about it once.  But you have a race between when a reading and an update occurs and when it is read in two other places. Not sure if you have an old current wavelength or wavelength of current newly updated at each iteration of the loop.  Just look at your code, I can't even tell which way you want it to be.

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.

• When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

  When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

  original title: list of Network Service does not illuminate

  Hi SikDude,

  Please use the Forum of the community for Vista.

  Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

  Please let us know if we can do something else.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.