TextArea and DateField in DataGrid editable after that 'editable' set to 'false '.

Similar Questions

• all characters replaced by square with two zeros on the top and a number below, works ok when uninstall it, reload and start the first time, after that the problem reappears. sometimes works first time to reboot. IE and Chrome ok, light running. v 7, wind

  Set up of fonts etc seems to be ok, still had problems with plug-ins disabled

  Try to set the pref gfx.font_rendering.directwrite.use_gdi_table_loading false on the topic: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• Everything looks blurry and also works very slowly after that graphics drivers have been updated. Other applications or browsers are not affected.

  Another issue that has been ubiquitous since before this problem is that the browser "freeze" for half a second or two while changing / reloading tabs if there are problems connecting to some websites.

  go to the Tools Menu-> Options-> advanced-> general-> uncheck use hardware acceleration when available -> click OK

  Check and tell if its working.

• The water on the keyboard and it does not work after that I cleaned

  Ispilled a bit of water on my keyboard lapyop and wipe immediately, but it's still not working what can I do

  Hi lizfs,

  Give, it drying time and see if that helps.  If not, chances are although the keyboard has gotten watered (pardon the pun) with some type of short circuit or something and must be replaced.  With laptops, the water passes also through the keyboard to the components below, then it may be fairer than.  Computers many do not like water.

  Try contacting the manufacturer of the computer for advice and assistance.  Most keyboards can be removed amd which may help to speed up the drying or show more obvious shorts or water that you missed.

  In the meantime, you can try to attach a USB keyboard to be able to use the computer.  If they can not will not help (and this test will narrow the magnitude of the problem, if this keyboard works or ID a broader issue, if it's not), then your only real choice is a local reputable computer repair shop (NOT Geek Squad or any like that) to see if something can be done.

  Good luck!

  Kosh

• should I uninstall course lightroom and photoshop on my pc after that creative cloud has landed in the photographers plan?

  I just download the map of photographers. I'm on a PC and have you already LR and PS on my computer. Do I need to uninstall versions that I have?

  Hi Jo + crocks.

  No, the amount of the fine to have both versions installed on your computer. A CS 6 or an earlier version can coexist with a creative Cloud version without causing any problem

  Please see the link below:

  Adobe Creative Cloud FAQ

  Let us know if that helps.

• How to transfer a file from my computer to my phone using the usb cable and how to find it after that I did?

  I try to put a software on my phone program that monitors calls etc, I downloaded the program from the provider to my computer, but can't do transfer through on my phone

  You need get the instructions of the supplier of the program. Nobody here would know.

• Wireless Auto configuration does not work after that manual set up

  Wireless Zero Configuration (WZC) stopped working on my computer at random.  I went online found some resources how to click Run, put in a formula and get it up and running again. It worked... once. When I turned off my computer and turned it back the next day, WZC did not work again, so I went through the whole process, once again, but now it doesn't work at all. I guess I should just uninstall and reinstall the Configuration automatic service, but I assure you that I do things. Can someone help me if I can do my work on my computer again? Thank you

  Yes, it's the process that I have lived, more than 15 times.  When you make my hours of searching, he had 3 different codes to use when using:

  Start > run

  1 %SystemRoot%\system32\services.msc/s

  2 ncpa.cpl

  3, sysdm.cpl

  Regarding the third party... my laptop is very old, but I took good care of her. This issue is literally something that started when I turned it on.  Wi - Fi, I have a "Broadcom" symbol (which was always there) in my quick launch.  Other than that there is no component of third-party wireless known on my computer.

  The command symbol Broadcom wireless utility IS a third party.  Although you can have the icon in the notification area since you had the computer, it must have been turned off and is now activated.  Either click or right-click on the icon of Broadcom and see if you can find a section 'options' or 'preferences' which will allow you to disable for Windows order your wireless card.

• HP Officejet Pro 8620: after that I set up my fax, cannot answer phone or answering machine messages

  I recently set up my fax feature and now I cannot answer my phone and cannot get messages on my answering machine.  I'd be ok just to cancel the fax feature that I use really, but do not know how to do this.

  I really need to get messages more faxes.  Any help is greatly appreciated!

  Charles, thanks again for your help.  I have reset my answering machine and now everything works!

  I am so happy!!

  Thanks again

• After that I used movie maker and try to post it on facebook, it is said that I have need a Visual server that is sharing media of Neptune or Mydeo, how can I by pass them and post another way?

  ITI said after that I made my movie with windows movie maker and try to publish it after that I backed up, to publish on the web, it tells me that I need a video host to publish on the web, and it is either share media Neptune or Mydeo, I want to display on my page facebook, how can I work around these video hosting web sites?

  Hey Danny,

  I suggest you to refer to the help article and check if it helps.

  Download & watch videos

  http://www.Facebook.com/help/video

  If the problem persists after the query in Face book support forum for better support.
  www.Facebook.com/help/

  It will be useful.

• Add a homegroup password after that put Windows in place is over and a password was not entered during the set up process

  Hello

  I had a hard drive crash and had a new hard drive installed.  At the end of the recovery process, I was asked to answer questions such as the choice of a language.  I also had the opportunity to put a password in a homegroup. Not entered a password.  BIG MISTAKE.  I can't reach my home group now because I do not have a password.  I don't have the ability to change the password that I never entered one in a first time.  Unless someone can help me, it seems that my only option is to make the process of recovery everywhere.  My concern, there is that I won't be able to download Microsoft Office almost again because it won't let me this time.  I activated once and he didn't allow me to activate again. But he did.  I think that he won't let me activate a third time.  Can someone tell me where I can go to add a password to my homegroup.  No help from HP or Microsoft Windows has been useful.  I have Microsoft Windows 7 Home Premium.

  Hi kschoff.

  
  Thanks for posting your query in Microsoft Community.
  
   
  From your description, I understand that you are unable to add a password for home group after that Windows set up was complete.
   
  I suggest you create a new group home and check.
  
  Follow the link that will help you create a new group of home.
  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1
  
  Hope the above information helps.
  Make it happen to us and made me know the status of your question so that I can fix it as soon as possible.

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• Recently, my laptop was hacked despite the defender of the window and the firewall running. After the accident, I have WINDOWS DEFENDER IS SETTING SWITCHED ON

  Recently, my laptop was hacked despite the defender of the window and the firewall running. After that accident, I reinstalled vista Dell supplied CD. Initially defnder window was running, but I discovered it suddenlly, if off. Attempts to change IT is futile because it shows Run Time error

  There is an installed antivirus program? Windows Defender is not an AV, it protects the system of spyware and potentially unwanted programs.
  Is there an antivirus or Security Suite program that is installed with Windows Vista included on the Dell disk?

  If so, what is disable Windows Defender, such as AV/SS can have a spyware component included with what is supposed to disable Windows Defender to not cause conflicts.

  Expert MowGreen Windows IT Pro - consumer safety

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to stop xp lost / forget my password and force me to restart after only one or two days of availability editions home and professional

  Title says it pretty well, but it is on two different AMD multi-core cpu with a list programs installed for the most part identical and quite long.  I hope that it is a problem of xp, someone has already found and fixed even if I don't the have not found in several searches.  Before that everyone assumed that I forgot my password, let me assure you that is not and has not been and will not be the problem; but when (after one day or more available), I'm trying to connect with my correct password, xp persistently asks me if I forgot it and of course, this means I have to restart, with its side effects, in order to refresh the memory of xp apparently and allow me to connect.  For what it's worth, in this case, no matter if I 'disconnect' screen lock or me with the Windows key + combination L or even to pass time until the locking screensaver mechanism is used automatically.  It seems that over the years something in a few key file or registry or RAM or what is get corrupted, but what is the solution?  I don't remember what happens until fairly recently, so can it be caused by something changed by one of the most recent Windows updates?  Another thought that occurs to me would be whether there all known software conflicts have caused something like this?   I don't run a server, but I have still xp does not have to be reloaded every day or almost and prompt me to worry what else may be getting damaged as well as my password.  I've kept ZoneAlarm Extreme Security uptodate and analyzed regularly without viral invasions/epidemics coming to my attention, so I am at a loss to point a finger there, too.  All my other software is widely used, as surely as if she caused this problem, others would have reported such a conflict before now (?).  Oh, and I don't do betas (unless you count an occasional Release Candidate), so I don't have this kind of problems.  I know that's not the most urgent global problem, but it always makes me think for a moment, what happens if he loses or forget my password - so what I'll do if the restart does not resolve, even if only temporarily.  I guess you could consider my reboot of a workaround, but I want to find is something that is more durable than all of this, please.  I understand there is a somewhat similar problem involving mode XP of Windows 7 and apparently it may concern unique aspects of this OS, but maybe there's an analogy?  Also, is there a limit to (or how to limit) the number of times where XP will connect a particular user (or user attempt?)?   If so, I would like to know how and where this can be changed, to see if it helps me everything.  Remember, however, there must be something that will work on Home and Professional Editions, that's why he left me speechless.  Oh yes, I want to emphasize that both of my computers are free standing without any local network operating, etc., just a router to access internet and shared printer.  If there is more information you need from me, just post a reply with what you want and I'll try to get back with her in 24 hours, if possible.

  Hi victorwhitehead,

   

  Method 1:
  I suggest you perform a SFC scan and check.
  To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow

  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time

  c. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  d. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link for more information on CFS below the scan mentioned:
  http://support.Microsoft.com/kb/310747

   

  Method 2:

  You can check if the hard drive has errors or corrupt, sectors that is causing the problem. Refer to the below provided the link and follow the steps provided to check and repair corrupt hard disk sectors:

  http://support.Microsoft.com/kb/315265

  
  Method 3:
  Step 1:

  If the computer keeps restarting I suggest you to check the hardware of the computer as the battery of the bios, bad diet, loose cables, etc.
  
  As yu may refer to the article below and check, if you can boot into safe mode in Windows XP. Refer to the below section to start in safe mode.
  http://support.Microsoft.com/kb/315222

  Step 2:
  If you are able to start properly in safe mode, then you can perform a boot clean and check for exactly the problem.
  To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -
  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual and check:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I have exactly the same problem in Windows Vista Ultimate Edition.  I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I see that you asked initially that this issue in 2010.  Has there every been a resolution?
  Elliott
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/network-profile-keeps-reappearing-and-displacing/515108df-1aa6-457f-9262-6be835f82198

  My Eureka has been using netsh, explains Superuser.com «How to completely remove a wireless network from Vista» Everything I found on the Microsoft site doesn't give any examples on how to find profiles (netsh wlan name) or the statement appropriate to remove this profile (netsh wlan dlete name = "the name exactly as shown, case-sensitive quotes". That he solved it for me.