Gigaframe L80 forget automatic power switch time and brightness settings

Similar Questions

• The A3-A20-K1AY support automatic power switch with flip covers?

  I just bought this Iconia and a folding cover to go with it. I can't find anywhere in the settings to activate automatic power switch. Now, I wonder if this tablet has even this feature.

  Yes, he does not sleep automatically when you close the lid. Better to use the button for this.

• Z440 - M60 BIOS - time and Date settings

  We can configure the Date and time in the BIOS on a Z440 with worm M60?
  If Yes, where is the option?  Sorry if this is a stupid question.

  I guess I don't think it is preconfigured, but I don't know even how to check the current configuration.

  EskoBomb, BIOS Z840/Z640/Z440 has many changes from previous HP workstations.  The user interface of BIOS F10 is different.  I deleted my previous answer, since it applied to the previous HP workstations.  (Sorry, I misread your original message).

  BIOS Z840/Z640/Z440 has NO settings to change the time and Date.  This generation of workstations doesn't have this option.  The time and date can be set after bootinging, and then edit them in the operating system.

  These BIOS settings are no longer needed.

• Windows 7 automatically change the time and date.

  Original title:

  Time changes

  In my HP Pavilion dv6t-3200 suddenly my Win 7 64 bit seems to change the date automatically and when I set to the right time it running an hour and repeat the time I re installed the OS and checked. The problem persists and I also changed the battery and checked them was no change please help me... to solve the problem :-(

  Hello
  1. You have your timezone set correctly? Is - this tick on "automatically adjust clock for daylight saving time?
  2. You did changes to the computer before the show?
  3. Do you have any third-party clock on your computer application?
  We will synchronize the clock of your computer with a time server Internet and check if it works. This means that your computer's clock is updated to match the clock on the time server, which can help ensure that your computer's clock is accurate.

  a. open the Date and time by clicking the Start button, click on the Control Panel, clicking clock, language, and region, and then clicking the Date and time.

  b. click the time tab Internet and then click on change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. Select the check box next to synchronize with a time server Internet, select a time server, and then click OK.

  Set the clock

  http://Windows.Microsoft.com/en-us/Windows7/set-the-clock

• Windows 8 forget my mapped network drives and printer settings

  I have a Dell Precision M4400 I have upgraded from Windows XP to Windows 8 a few months ago.  At work, I have mapped network drives shared on two different servers (called "appsrvr" and "wsbs2008") and use a network HP LaserJet P4014 printer.  At startup, Windows remembers always drives mapped on \\appsrvr\ but not \\wsbs2008\.  Each time you start and sometimes after sleep/hibernation, I have to re - map three drives \\wsbs2008\.  I always leave "Reconnect at sign-in" selected, but Windows 8 seems to have an anterograde amnesia.  It is irritating because I have a lot of files that I use on these drives.  It's bad enough, but it seems it can be related to a problem even more annoying, which is that Windows 8 does not remember that has LJ P4014 printer of a duplex unit installed.  Similarly, it seems to happen every time you start and after little sleep deep.  It is particularly irritating because I prefer to print pretty much any two-sided and it takes several steps more fix manually at least once a day via the control panel.  If I go to the control panel and you try to add a printer, I see two options:

  "HP LaserJet 4014 on APPSRVR" - selection that immediately gives an error: Windows cannot connect to the printer.  Operation failed with error 0x0000007e.

  "HP LaserJet 4014 on WSBS2008" - selection that gives "connect to HP LaserJet 4014 on WSBS2008.domain.local.  Looking for a driver.  Complete the installation.  Windows cannot connect to the printer.  Operation failed with error 0x0000007e.

  I followed several instructions online to resolve this error, nothing helps.

  I was finally able to connect with a limited fan support IT / desktop support person to the small company where I work.  According to the properties of the device, it is connected via a WSD port (whatever it is).

  Did it come all worms down to Windows 8 plays not nice with CAT 2008 (FE Standard with SP2)?  Are there solutions to these problems other than asking the company to upgrade to a newer version of Windows Small Business Server?  Ironically, APPSRVR, which doesn't seem to have a problem with my computer has Windows Server 2003 Standard Edition Rev 2, and I had no problem with either when I had XP.  Remember, despite these problems, I like much better than XP Windows 8, but I like it much more if only he would remember my settings!

  Hi Susan,.
  
  Your question is more complex than what is generally answered in the Microsoft Community. It is better suited for the IT Pro TechNet public.

  See the link below to ask your question.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking&filter=AllTypes&sort=lastpostdesc

  Hope this information helps.

• Pavilion x 360: backward buttons brightness, and brightness settings

  Hi, I'm having a few problems about the brightness of my laptop.

  First of all, when I turn on my laptop, the brightness is always on the dark night I can't see the screen. I've been on all the settings and put the brightness that max for both when it is plugged into the power supply and not. And yet, whenever I turn it on, the light is not on and the screen is completely black.

  Second, my brightness buttons are upside down, so the button should I press to decrease brightness increases actually, and the button I push to increase the brightness decreases actually it.

  Once again, I looked in the settings and can't find anything to change them - I have not downloaded or installed anything that should change them, I literally use the laptop for microsoft office and the internet.

  Help, please

  Try disabling the QuickStarts, which seems to help with the problems of this kind. I hope that the problem will be corrected in a future update, but until then, you can try this:

  Windows + X to open the power options
  Click on choose what the buttons to
  Change settings that are currently unavailable
  Scroll down to the Tower in the quick start (recommended)
  Uncheck the option to turn it off
  Save your changes, and then restart the computer to see if that helped.

  Not with screenshots: http://www.howtogeek.com/243901/the-pros-and-cons-of-windows-10s-fast-startup-mode/

• Time and Date on Portege 3490CT...

  Hello.

  Is it possible to set the time and date settings in the BIOS somehow?
  I'm tired of setting the time and date on my windows every time that I reboot or turn on my computer.

  I hope someone can help!

  Sincerely,

  Daniel A. Johansen aka SiLverFerret

  Hi Daniel,.

  If you have set the date and time every time that you start Windows, so I think that your CMOS battery has expired. It is a small battery used only to keep the parameters of the BIOS (including date and time).

  Normally, the CMOS battery recharges when the laptop is connected to the power supply.

  I would recommend that you contact a Service partner to get your replaced CMOS battery (it is normally attached to the motherboard).

  HTH

• Windows makes the automatic update and my settings are only for download.

  Windows 7 - I've always had my updates the setting that allows them to download, but I chose to install them.  These past few weeks I've noticed that if I refuse and install these updates that they automatically install themselves.  I like to choose how to upgrade usually one at a time, so if there is a problem I know what update caused it.  But in recent weeks a notice that he has downloaded the updates look bad.  So when a few days where I don't bother updating automatically they settle.  I checked my setting of many times, and my settings are correct.  So why are my rules being ignored?

  Once the updates are downloaded, all that is left restarts to install updates

  Some updates that don't require not a reboot will probably install

  Hardly a way to install an update at the same time as you want too.

  I suggest you these parameters personally if install one at a time is your preference

  These settings will be updated also exclude recommended to be mixed in the important section, recommended updates cause most of the problems.

  

• Time and Date setting

  In general - the time and date settings can I put two areas. I want to see two areas on my status bar. Don't want an app for that.

  I'm afraid, which is not supported by the firmware. If you want that for any update to update future iOS, let Apple know your wish using this link:

  Apple - iPhone - Feedback

• I have a Server R2 windows 2012 automatically switches out of his own for several times and it doesn't look like a hardware problem.

  I have a windows server R2 2012 which automatically switches out of his own for several times and it doesn't look like a hardware problem. and I have this problem every day.please tell me what is the reason

  Original title: r2 windows server 2012

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.

• How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  It does not work like that. It cannot be scheduled for a specific time.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn