Laptop with black screen

Similar Questions

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!

• 6 s iPhone restarts with black screen randomly. However, the system always restores the same question.

  I have an Iphone 6 s 128GB. The iphone automatically restarts with black screen and there is no particular application I use when it crashes.

  I did a system restore twice but still the same issue. Could someone please help?

  If the restore does not solve the problem, it is high time to take your device at the Apple Store for more diagnoostics. This may be material / display problem. Good luck.

• HP Pavilion laptop g6: black screen with white cursor, connect

  My laptop is a few years old and today after I log in, I get a black screen with a white cursor. I read a few threads on the forums and have tried to take the battery out and pressing the button for 30secs-2mins (tried twice). I can access everything ok in Mode safe, so made a malware bites scan & clean registry. No maleware was found and I rebooted, but always the same black screen when you connect in normal mode. I tried to access the Advanced tab in the BIOS to make the test hardware, but I do not have this tab. I'm out of ideas. Help, please

  B_S2

  Hello;
  
  Let me welcome you on the HP forums!
  
  As it works OK in safe mode, then it's SOMETHING that is loaded at startup which is screw up the display.  Could be a runtime program. could be drivers, might be a Service.

  No easy way to tell.

  Demarrer start in safe mode, type MSCONFIG in the start area.  When that opens, turn off ALL startup items. Reset.

  The PC now work, if one (or more) of these numbers - and you have to go through a tedious process of re-enabling them one at a time until the PC fails again.  The last of them that you re-activated was the problem.

  Here is a tutorial on how to do it: http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/

  If the PC still does not work with all startup items disabled, then return to msconfig and click on the Services tab.  Check the hide services Ms.  Then turn off half superior Services.  Reset.

  If the problem is resolved, you will need to go through a tedious process of reactivating a Service at a time until you find the one that is the problem.

  If the problem is not resolved, turn off the other half of the services.  Repeat as above.

  No easy way to do...

  Good luck

• Satellite M70 - 350 - recovery disk stopped with black screen

  Hello

  I tried my laptop with the original recovery CD or DVD recovery. He just stopped with the black screen and the error message.

  After that, I tried the advanced recovery mode. By selecting the ghost Image, which gave me the Image corrupt error.

  Weird enough even installing from an original CD of Windows fails. With that before even I can select something, I get a black screen with a blinking cursor. Appers whil the windows cd is loading drivers.
  At the bottom of the screen, there are that many drivers listed one after the other. The last thing mentioned here before the blinking cursor is Partition NTFS.

  Cause the original recovery disc has already deleted all the contend on the laptop it's usless now.

  Any ideas what the problem might be?

  I also think that there is a problem with the HARD drive.
  If possible, try to get a new one and try installing the OS using recovery media again.

  Do you use DVDs of recovery for the first time?

• Satellite L555 simply freezes with black screen (White Stripes)

  Hello

  I'm having some problems with my new Toshiba Satellite L555 laptop, it is simply freeze and appears a black screen with white bands.
  He don't do it regularly, but it's annoying.

  Any suggestions?

  Hello

  The possible reasons:

  1. a malfubction graphics card
  Malfunctioning of the internal display 2. You can view the external monitor to see how it is?

  As little as possible:

  1 a graphics driver
  2 operating system itself. Have you tried to reset to factory settings (F8)?

  Otherwise, you must contact the Asp (SAV) in your country. Your laptop is still new and under warranty, so it will fix it for free.

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I turn on my laptop and black screen remains, what can I do?

  WHEN I TURN OFF MY LAPTOP, I TRY TO TURN IT ON BUT SCREEN STAYS BLACK, THE KEYBOARD LIGHTS ARE ON AND THE POWER BUTTON REMAINS IN

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

• Vista Home starts with black screen with blinking cursor

  Hi, I have a toshiba satellite with Vista home, he stopped last Sunday, when I turn it on, start it start sbooting normally but then I get a black screen with cursor and is not go further. I tried last good known, tired, safe mode, I have same TOSHIBA recovery disk and does not either, when I boot from the CD, it seems that it is loading files, then the yellow bar on the work screen appears, but then I get the black screen with cursor, nothing after that.

  I took out HD and a Sata drive via the usb port to connect to my HP laptop. I was able to open the F and G, but C drive (where the OS is installed which has changed the letter e) could not open, he told me I need to format it.

  I have the original recovery disk for Toshiba, which works when the hard drive is not in the Toshiba, but when I put the hard drive back, I never the option where it asks me to repair or reinstall all.

  is it possible that I can use my laptop HP after the toshiba drive connected via USB, to repair the toshiba C partition (which is called E)?

  There are more than 2 weeks worth of work that are not backed up, and I wouldn't lose. Help, please.

  Hi MB1969,

  This seems like a hard disk failure. You must get in touch with Toshiba to get help.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Windows 8 starts with black screen on startup.

  Original title: BOOT WIN 8 on TOSHIBA SATELLITE

  Hi - I've updated to Win 8 on my Toshiba Satellite laptop.  Now, when I start the laptop, it shows the initial screen of Windows but will not perform the process to the lock screen or splash screen.  The screen is black and goes no further.  I have to press the off button and hopefully get to go in standby mode (i.e. when the power led is flashing).  So, I press the button to wake that then displays the lock screen.

  Someone has ideas on what setting could be the cause.  I have looked in the trunk of the BIOS but can't find anything.  Also can't find anything obvious in settings PC Win

  Thank you

  Richard

  Hi Richard,

  I would be grateful if you could answer the following questions:

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Toshiba Satellite laptop?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

   

  Method 1: To resolve this problem, update the site Web of Toshiba video card driver.

  Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• The Windows Setup program does not open. Stuck with black screen.

  Hi all

  I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."

  I have reset the NVRAM (command + alt + p + r) which did nothing.

  I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.

  The forum has a lot of "black screen problems" but none of their solutions worked for me.

  Any help would be greatly appreciated!

  Thank you

  1. leave BCA creates the installer from USB, but not to partition your drive.

  2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.

  3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.

• Lenovo X 201 laptop computer black screen and LCD does not detect after windows startup

  Suddenly, my Lenovo Thinkpad x 201 shows only a black screen. I checked the LCD screen with a light and I could see a dark image of the Thinkpad logo and then it go completely black. But when he is on safe mode, I saw my desk in black screen (when I use a light).

  I've updated the BIOS also using an external monitor. But still the same. I'm completely at a loss. Please someone help me to slove this problem...

  It is due to the inverter of the screen which has stopped working, it controls the backlight of the LCD/LED screen part when it breaks it causes the backlight to turn off and wont go on then you would need to have ups re-place with a new one.

  Here's an example of how it looks like:

  

  It may seem different on each model, but that's just one example of a lenovo T41.

• Start the system with black screen.

  Original title: black screen D610

  Get a black screen and the low log in box.  able to connect, but cannot see the loading process to be able to try safe mode, can even see the start at the bottom of the screen.  nothing appears on the icons even not. This problem occurs on a dell latitude d610 laptop computer

  It seems that the monitor is bad. Hooked to a laptop spare part and he took care of the problem.  Thank you for your response.