Given by the user security report

Similar Questions

• ACS Auth: Use of group data for the authentication of the user-> security problem?

  IM only using a VPN-installation (router, ACS, Cisco VPN Client) and I noticed that the name of the Group and the Group decrypted password can also be used in the second step of the authentication (the extent of authentication or authentication of users), which is a big security concern. What wrong with my setup.

  For the test I have set up a VPN configuration as described in cisco documents. Here, it also works. The identification information of the Working Group in the authentication of the user, too, which is quite logical, because the group credentials are also a user in the database of GBA. Of course, this user can be authenticated in the user authentication process.

  Who is wrong? How other admins to solve this problem? Am I wrong in my approach?

  Thank you!

  Yes, permission will have password for "cisco", at least for isakmp and pki. The group will send its name and password Cisco to receive the av pairs (ASA has a function to create a "good word of different past" but he's not here on IOS, AFAIR)

  It is a restriction known - you should not use the same server for authentication and authorization, with IOS and ASA.

  Did you give this property (either / or):

  -local isakmp authorization

  -l' authentication certificate (Group)

  -sharing features for authentication and authorization between servers.

  I don't think we can do much wise configuration to prohibit this behavior.

  Edit: spelling correction.

• Include the user in report currency

  Hello
  
  I want to know how I can include the code of the user who is signed in currency in the report.
  Is there a session variable, that I can use for this?
  
  Kind regards
  
  Ingeborg

  Hi, try VALUEOF (NQ_SESSION. USER_DEFAULT_CURCY)

  -John CRMIT

• Gateway connection user security report

  I'm wanting to have a weekly e-mail report that will give me a list of all users that connected to view 6 through our security rather than gateway server in their own country. We want to be able to keep track of who is connected to workstations of House / office. Is this possible? Thank you!

  -Brian

  Thanks for the info! I ended up creating a connect/disconnect base script that adds both logging and the computer names for each of our users. In this way we can just go to the log folder and select the file username.txt to see when they connect to. But is not ideal was quite simple to achieve what we wanted. I'll check Splunk. Thank you!

  -Brian

• query for the path of the hierarchy of the child to the parent for a child key given by the user

  CREATE TABLE EMP_ID
  (
    HEAD_ID  NUMBER(4),
    TAIL_ID  NUMBER(4),
    NAME     VARCHAR2(20 )
  )
   
  Insert into EMP_ID  Values  (1011, 1008, 'C11');
  Insert into EMP_ID  Values  (1008, 1003, 'C8');
  Insert into EMP_ID  Values  (1012, 1003, 'C12');
  Insert into EMP_ID  Values  (1020, 1003, 'C20');
  Insert into EMP_ID  Values  (1025, 1003, 'C25');
  Insert into EMP_ID  Values  (1015, 1012, 'C15');
  Insert into EMP_ID  Values  (1012, 1005, 'C12');
  Insert into EMP_ID  Values  (1005, 1017, 'C5');
  COMMIT;

  now my requirement is like this
  
  If choose the head_id as 1012 and 1017 as tail_id
  It should cross the path shaped tail to print the path as shown below

  c12/c5/c17/c12

  such as this shows that tail_id was used previously as head_id in the path of the hierarchy.
  
  Here is the hierarchy as shown below

  1015
        1012
              1005
                  1017

  Rede,
  Is that what you want?

  CREATE TABLE EMP_ID
  (
    HEAD_ID  NUMBER(4),
    TAIL_ID  NUMBER(4),
    NAME     VARCHAR2(20 )
  );
  
  Insert into EMP_ID  Values  (1011, 1008, 'C11');
  Insert into EMP_ID  Values  (1008, 1003, 'C8');
  Insert into EMP_ID  Values  (1012, 1003, 'C12');
  Insert into EMP_ID  Values  (1020, 1003, 'C20');
  Insert into EMP_ID  Values  (1025, 1003, 'C25');
  Insert into EMP_ID  Values  (1015, 1012, 'C15');
  Insert into EMP_ID  Values  (1012, 1005, 'C12');
  Insert into EMP_ID  Values  (1005, 1017, 'C5');
  Insert into EMP_ID  Values  (1017, 1012, 'C17');  ---- ==== This was missing in your setup example
  COMMIT;
  

  QUERY and OUTPUT

  SELECT *
    FROM (
  select
    connect_by_iscycle as CYC
   ,dt.head_id
   ,dt.tail_id
   ,sys_connect_by_path
                    (  dt.name
                     ,'/'
                    ) AS EMP_PATH
  from   emp_id dt
  start with dt.head_id = 1012
  connect by  NOCYCLE  dt.head_id= prior dt.tail_id)
  ;
  
  CYC     HEAD_ID     TAIL_ID     EMP_PATH
  0     1012     1003     /C12
  0     1012     1005     /C12
  0     1005     1017     /C12/C5
  1     1017     1012     /C12/C5/C17
  0     1012     1003     /C12/C5/C17/C12
  

  If you want just the printed path

  SELECT *
    FROM (
  select
  max(sys_connect_by_path
                    (  dt.name
                     ,'/'
                    )) AS EMP_PATH
  from   emp_id dt
  start with dt.head_id = 1012
  connect by  NOCYCLE  dt.head_id= prior dt.tail_id)
  ;
  
  /C12/C5/C17/C12
  

  pre
  Sudhakar B.

• Restrictions of the user through DADS.conf

  Hello
  
  
  
  I created a database user and given that the user select the only rights on certain tables in my database. Then, I set an entry DADS.conf specifying the name of user and password as the PlsqlDatabaseUsername and the PlsqlDatabasePassword.
  
  
  
  For example:
  
  
  
  create user testuser identified by testpass;
  
  grant select on my_table testuser;
  
  
  
  Then in my DADS.conf file
  
  
  
  
  
  & lt; Location/maps/apex & gt;
  
  Order deny, allow
  
  AllowOverride None
  
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  
  Docs PlsqlDocumentPath
  
  PlsqlDatabaseConnectString server.domain.com:1521:mydb ServiceNameFormat
  
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  
  PlsqlAuthenticationMode Basic
  
  SetHandler pls_handler
  
  PlsqlDocumentTablename wwv_flow_file_objects$
  
  Testuser PlsqlDatabaseUsername
  
  Apex PlsqlDefaultPage
  
  PlsqlDatabasePassword testpass
  
  PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
  
  Allow all the
  
  & lt; / location & gt;
  
  
  
  
  
  Yet, that the user still has access update to database tables that I granted only select access rights.
  
  
  
  Is there some why to control this?
  
  
  
  
  
  Don

  The user in the DAD creates the database session. For security reasons, this user should have any right other that "create session". When your application is running (using any DAD) all SQL and PL/SQL is parsed as the scheme designated as the owner or the scheme of the analysis of the application.

  Scott

• I'm trying to generate a table of random numbers 30. After each 5 readings a new vi must open and indicate to the user than 5 readings were made. and continue with the generation of the table again.

  because I don't have a sensor now, I am currently generating a table of random numbers 30. After each 5 readings a warning should be given to the user 5 readngs are completed. This cycle must be repeated. the size of the table is 30.

  Please help me, waiting for response as soon as possible.

  Once I have the transducer, I'll take 30 analog samples and then after each 5 smaples this wraning will be displayed din a new VI

  Use a while loop with a delay time representing your sampling interval.

  Use is equal to the count Terminal to see if 4, then 4th iteration = 5th sample.

  Use a box structure. The real deal will only run on the 4th iteration.

  In the case of true place a Subvi with your message of your choice in the front panel. Go to the properties of the VI window and set ' open the front panel when it is called.

  The condition to closing of attention is not given to your description.

  Consider that rather than usign a Subvi to do this, you can use the "dialog box one/two/three button" or "display message" live in the palette "user interface and dialogue."

  Please try it out and send your own VI. Do not provide us with a working solution.

  Kind regards

• the user profile service has not logon. TouchSmart 300-C

  Can not connect.  Given message: the user name or password is incorrect.  Entered the correct user name.  Don't have a recovery disk to reset the password.  Other options?

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• SQL Developer 3.1 EA3 impossible to import / export user defined reports

  Hi gentlemen,
  
  Name says it all. Import / export do not appear more or in the drop down menu to the users defined reports, or export to other reports (DD or shared reports).
  
  Best regards
  Olivier.

  They now save as / Open...

  Hope that helps,
  K.

• Not receive a computer given to nine, but don't know the user name and password

  I got a refurbished computer and I don't know the user name and password. Someone knows what to do?

  * original title - I received a refurbished computer and I don't know the user name and password. Someone knows what to do? *

  Hello

  Reinstall vista

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Financial Reporting - the user can access the POV dimensions

  Hello. In collaboration with the 11.1.2.3.700 version. Have a HFM user that can go in HFM and see all members and data (scenarios, entities, customs, etc.) within HFM. When he goes to EN to run reports, however, he has problems with dimensions that are secured in HFM - entity, scenario, (custom) data type. If one of these dimensions is the point of view, they do not show when it displays an overview from the point of view and then the report does not work because there is no selection. If these dimensions are defined in the report (which is not part of the POV), the report runs well.

  There is no preference user limiting POV members and reports are not confined to specific user POV members. Other people can run those reports very well. Also tried to make this user a HFM and the Foundation (which EN) administrator and even there the problem.

  Any thoughts?

  Thank you

  Eric

  Hello. A great co-worker has solved the problem. She used the ManageUserPOV.cmd utility to export users POVs. The user in question had an entry for the missing dimension, so he was never invited to do and reports failed. Imported and supplied the lack of dimension and it works fine now.

  Eric

• Send an OBIEE report to the user no OBIEE Mail (customer) in OBIEE11g

  Hi Patricia,
  
  I'm fresher to OBIEE, I need step to 'send an OBIEE report the user no OBIEE Mail (customer) in OBIEE11g. searched on-line got only OBIEE 10 g Documents that one also followed but no results. Please help me... step to config a courier for external users.
  
  Thnaks,

  That the SMTP server configured by your admin and create a privilege given to your role agent. Then schedule an Agents to yourself / Testuser with the report to be sent to external users as its content. Configure the profile of delivery to the recipient. In the implementation for electronic device - profile of delivery specify the external e-mail address. This might be useful

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/bi11115/delivers/alerts.htm

  Thank you.

• How to limit the rows returned from the user role-based interactive reports

  Hello
  
  I'm a new Apex-PL/SQL Developer, looking for some recommendations on how to implement an interactive report to display different lines in your current application ROLE service.
  
  For example let's say you have an application for orders and 2 different roles: superuser and sales-rep
  
  Now, if super user connects to the application, it should be able to see all the rows in the orders table, however, if the user 'john' connects with the commercial list, he should see those orders assigned to him.
  
  I don't think I can use "dynamic" sql and build my where clause on the fly if I choose an interactive report so I was looking around and came across the concept of a common function but it seems that some other people do this with collections of the APEX. Is there anyone with a recommendation for one to use? A few books I've read recommend putting most of the logic that you can on your database (easier to maintain in the long term) that's why I thought about pipep functions using, but I thought I would check with the experts first.
  
  Thank you!

  If you are allowed to use an Enterprise Edition database and to apply these restrictions, through the entire application, or across multiple applications, then use of private virtual database (DPV), with the security attributes of PL/SQL Code to the initialization/cleanup APEX application to set and reset the settings in your application.

  Should you not use EE, then you can roll your own VPD use parameterized views.

  If the restriction is only required for this unique IR, then, simply use a union of two mutually exclusive predicates opportunities:

  select ...
  from orders su
  where :app_role = 'super-user'
  union all
  select ...
  from orders rep
  where :app_role = 'sales-rep'
  and rep.salesman = :app_user
  

  All of these approaches should outperform functions in pipeline, collections, or a user-defined function (which, in a predicate that is executed for each line, mudra stopped the large datasets because of context switching).

• Bug report: application process runs even if the user is not authenticated.

  Hi all
  
  I just stumbled on something that looks like a bug or a security problem for me:
  When you have an application at a point 'Load - before the header (header of page template)' this process is executed no matter if a user is logged on or past validates a session ID in the URL.
  
  
  Example:
  In my Application, I have an application process to download a file when a certain application is defined. I chose the application process to hide the url/location of the user files and make sure that this file can only be downloaded in an application context (thank you Dene for inspiration: [http://apex.oracle.com/pls/otn/f?p=31517:15]). This works really well and did all the things I want to do.
  But then I tried to call my download URL (for example http://myhost:myport / mytest/pls/f? p = 1234:0:123123123123:DOWNLOAD_FILE:NO ::) from another computer without logging in.) I expected to get the login screen of my application and all my pages require authentication, but I got the file.
  
  To work around this problem, I put in condition of the pl/sql process ": APP_USER IS NOT NULL AND: ASK 'DOWNLOAD_FILE' = ', now it works as expected and shows the login page if the user is not authenticated or given to the session id is null/not valid."
  
  
  I am mistaken and that the process should not run? I put same authorization "must not be public user" who has been ignored as well.
  
  Peter

  Peter and Dene,

  Thank you for this comment. I agree that this is a bug and we'll fix it. A solution you can set the attribute Public user of your application to PUBLIC_USER. As long as your FATHER connects as apex_public_user it shouldn't break anything.

  Scott

• Component report from a form with the input of the user parameters

  Hello
  
  I am new to Oracle reports. I have an application coded 6i. I currently use the application in Oracle Forms Builder 9i. There are also few reports which are called Forms. Given that the application has been developed in 6i, the report was called using Run_Product. Forms are a set of parameters of the user of the report using the parameter list pl_id. The syntax used is Run_Product ('D:\Report\sales.rdf', SYNCHRONOUS, DURATION, REPORTS, FILE system, pl_id, NULL);
  
  I learned that the Run_product does not work in 9i and we need to use run_report_object. I changed the code to use run_report_object and using web.show_document () I am able to run the report in the form. There are 2 parameters that should be passed to report forms. The parameters are from_date and to_date which will prompt the user to enter the performance of the form. In the report, the initial values of these parameters are defined. Thus, the report runs fine for the initial value always. But when I try to change to the form_date user input and to_date, the release of the report does not seem to take the new values, instead the old report with initial values (defined in the report) is running again.
  
  Can someone give me the code to pass the parameters defined by the user to the State of the forms? I defined a report object in the node forms such as REPTEST and defined a parameter list pl_id and form_date and to_date adds pl_id and uses the following encoding:
  
  vrepid: = FIND_REPORT_OBJECT ("REPTEST");
  vrep: = RUN_REPORT_OBJECT (vrepid, pl_id);
  
  But it does not work.
  In addition, the parameters defined in the forms and States should have the same name?

  Hello

  If you want to send the settings when you use RUN_REPORT_OBJECT, you simply line:

  SET_REPORT_OBJECT_PROPERTY (report_id, REPORT_OTHER,' FROM_DATE ='|: BLK_INPUT.) FROM_DATE | "= TO_DATE' | : BLK_INPUT. TO_DATE | »
  paramform = no ");"

  The hidden_action parameter is required to use PARAMFORM = YES and RUN_REPORT_OB JECT

  PARAMFORM Specifies whether to display the form of run setting when you run a report through CGI or a servlet. PARAMFORM is only used to supply parameters to the layout of paper reports, Web reports no JSP-based.

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/Cmdline/common/bld_paramform.htm

  Regardss