Giving acccess share on a server running Windows Server 2008, Enterprise Edition

Similar Questions

• Task Scheduler in Windows Server 2008 Enterprise Edition

  We have Windows Server 2008 Enterprise Edition by using the Task Scheduler to run 4 tasks on a daily basis. Recently, we have applied the Microsoft updates and restarted the server, and now the scheduled tasks do not work with the field. It says logon failure: unknown username and password incorrect (0x8007052E). The domain administrator credentials (or domain administrator credentials), we applied initially used but it still does not work, but it works with the local administrator account. A new task was created by using the credentials of the domain and the task could not start showing the username and password wrong. I studied unsuccessfully Microsoft Knowledge base. Please advise on how we solve this problem?

  For assistance, please ask for help in the Forums Microsoft TechNet for Windows Server.

  Thank you & good luck.

• A problem with Windows Server 2008, Enterprise Edition

  Hi, I have a problem with ad on windows server 2008 Enterprise that when I try to install active domain services directory for me this message appear:

  
  
  http://img826.imageshack.us/img826/7508/39552832073804633241230.jpg
  
  Notice: I'm sure that password is complex and I erase and I disabled complex password policy and it appears again.
  Anyone has a solution or this problem before him

  Hello mohammedtayea,

  The question you have posted is related to Windows Server 2008, Enterprise Edition, and would be better suited to the TechNet ITPro community.
  Please visit the link below to ask your question in a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you

• I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible?

  Urgent please give me a Solution. I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible? If possible tell me that the process .it is a domain controller. If there is any tool? answer me. Thanks in advance.

  That you were previously informed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/i-want-to-take-the-backup-of-Active-Directory-in/d7aa33cd-5a4a-40D1-BCAC-70743cd4372d

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Don

• Expiration date and time in SQL server 2008 Enterprise Edition

  Please tell me the exact expiration Date and time in SQL Server 2008 Enterprise, and 2008R2 edition?

  Please tell me the exact expiration Date and time in SQL Server 2008 Enterprise, and 2008R2 edition?

  Hello

  Please post this question in the SQL Server forum.

  Category of the SQL Server:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Concerning

• SQL server 2000 will run on a server with windows server 2008 enterprise edition R2 operating system

  New server with the windows server 2008 r2 enterprise operating system.  You want to load sql Server2000 on it.  Is it compatible?

  Please repost your application in the Windows Server Forum.  Thank you!

• Virtual run Win Server 2008, Enterprise Edition on ESXI 4

  Hi all

  I have MS Windows 2008 Enterprise Server that allows up to 4 Windows servers to run as VMs using the same VM license key. Can I run the server of Windows 4 VM on ESXi 4 platform using the same VM license key? I think that if MS allows the VM 4 of to run on their Hyper V Server 2008 then I am able to run the VM on ESXi 4, using the license key a VM.

  Thanks in advance.

  VinnyP

  I think that it's evolving especially with Hyper-V now.  I think that there are some differences between people licenses but I'm the last Q / A on the virtual FAQ which is -

  Q. Windows Server 2008 virtualization licensing fees apply when used with non-Microsoft software virtualization technologies?

  A. Yes. Usage rights apply regardless of the virtualization product used. However, other than Microsoft software virtualization technologies are not supported by Microsoft. For more information about support policies, please see the following articles of the basis of knowledge Microsoft (KB):

  I take that to mean licensing concepts apply whether you're running Hyper-V, ESX, Virtual PC or work/VM Workstation Server

  Who knows with Microsoft, however, their reasoning is completely stupid and obviously tax based without thinking about anything through.

  -Kyle

  «"RParker wrote: I guess I was mistaken, everything CAN be virtualized"»

• Help with Windows server 2008 Enterprise Edition

  Issue 01

  I have problems with plug a USB in my server it says found new device, but when I click on the little icon sometimes as an unknown device on the computer and it happens for each USB device y at - it a reason for this and is there a way to fix it I tried to re install windows, but doe some reason my computer doesn't start from the dvd :(
  Issue 02
  When I tried to install 2 hard disks that are dynamic disks it won't let not mt assigned disk numbers or anything that he says only: file not found
  How can I fix that if possible

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• ESX 3.5 hosting Windows Server 2008 Enterprise comments

  Can someone tell me if ESX 3.5 supports Windows Server 2008, Enterprise Edition, and if so what should I do to install a 2008 Enterprise Server?  We run ESX 3.5.0 64607.

  Thank you.

  PJ.

  Yes, it would be a great place to start

  http://blogs.VMware.com/guestosguide/

  page 40

  If you believe this or any other answer was helpful please consider marking as 'correct' or 'useful' assign points

• Windows Server 2008 Enterprise upgrade of 2008 has beaten the bad standard

  Hello

  I installed a virtual server for production of Windows Server 2008 Standard, Windows Server 2008, Enterprise Edition (32-bit x 86/i386, support of license Volume and MAK), because I needed some additional features in the Enterprise edition.  During the upgrade process, the server hung a few times, requiring a "hard reset" to continue the installation (which seems normal for the installation of Server 2008 on this virtual hardware).

  However, after the installation is "complete", the server seems badly broken: the local view is empty, with a mobile mouse pointer.  Remote Desktop connection with takes a long time (more than an hour!, even after additional restart), to go beyond 'Application user settings', and once connected, the basic points are broken: starting server manager reports that it might not activate a plugin whose GUID I can't find in a web search, open the 'centre' of the network shows a blank window by typing "NET START someservicename" or 'SC START someservicename' hangs rather than launch this service or signals an error.

  Anyone know how to get out of this quagmire, short copy the latest data and wiping the hard drive?

  Please repost your request in one of the most appropriate Microsoft Windows Server Forums, thank you!

• Windows Server 2003 Enterprise Edition x 86 - Server starts fine with 8 GB of memory but runs slowly

  I have a client with a Windows Server 2003 Enterprise Edition x 86. The server starts fine with 8 GB memory [in any config] but runs super SLOW [like 10 minutes to load slow Windows] with 10 GB of memory. The operating system supports 64 GB of memory and material support it 16 GB of memory, so everything is compatible. Is there something that should be set to 8 GB term well?

  Please repost your request in the Forums of Windows Server.  Thank you!

• Allocation maximum vCPU for Windows Server 2008 Enterprise running on vSphere 4 Enterprise (ESXi 4.1)

  Hello

  I have a guest of Windows Server 2008 Enterprise (x 64) running on ESXi 4.1 with a vSphere Enterprise license 4. I believe that the comments and hypervisor should be allowed for and support 8 virtual processors, but when I add more than 4 and try to turn on the virtual machine, I get "market of the VM [virtual computer name] Virtual machine has 8 virtual processors but the host only supports 4. The number of virtual processors can be limited by the selected guest OS for the virtual machine or the granting of licenses for the host".

  The selected guest OS is 'Microsoft Windows Server 2008 (64-bit)'. There is no option in the drop down menu to 2008, Enterprise Edition.

  This configuration is actually supported? If so, what should I do to get it working?

  Thanks in advance,

  Matt

  Hi Matt.

  .. .on ESXi 4.1 with a vSphere Enterprise license 4...

  For vSphere 4, you need an Enterprise Plus license if want to create 8 vCPU VMs.
  In vSphere 5 will do a license...

  / Rubeck

• Implementation of a virtual disk that is shared for clustering in Windows Server 2003 Enterprise Edition

  Hello world

  I'm relatively new to Vmware, and I have no knowledge of Linux commands. Here's my problem I have Vmware Workstation 7 installed on my PC, I installed Vmware ESX 4.1 in and use Vsphere client to connect to the ESX Server. I installed 3 Virtual Machines each running Windows Server 2003 Enterprise Edition. The first DC1 server I set up like the DC with AD, DNS and DHCP, the other two servers called CLR-SVR-1 and/CLR-SVR-2 I have joined to the domain, but did not make them a domain controller. I want to create a 2 cluster nodes, but when I try the installation I get an error message not Quorum shared disk was found, and a second NETWORK adapter is required (although I have 2 network cards installed on the virtual machine).

  I tried to use the vmkfstools to create a floppy disk, but when I turn on the virtual computer, I get an error that I have not used the thick option (I entered this command, vmkfstools thickness - a free - 1 c d G vmfs/volumes/datastore2/CLRDISK/CLR.vmdk, but it didn't work).

  Can someone explain please how to do step by step to someone who knows nothing about Linux or vmware CLI commands commands?

  PLEASE IF ANYONE CAN HELP ME IT WOULD BE GREATLY APPRECIATED. THANKS TO YOU ALL.

  Take a look at http://kb.vmware.com/kb/1004617. This KB links to documentation MSCS he for different versions of ESX. I think the last doc on 4.0 U1 should work for 4.1 as well.

  André

• Update for Windows Server 2008 HPC Edition

  I have a server that is running Server 2008 HPC Edition and want to upgrade to Server 2012 Standard.

  I can't find any information that tells me if 2008 HPC Edition can be improved at the 2012 standard or not. In fact it is not all that much information about 2008 HPC Edition in general. I think it was not so much and that I see, then it was replaced by the standard 2012 provided that the editions go.

  If it cannot be upgraded, then I realize I have to do a new installation for such. I'm just curious to see if someone knows and could tell me in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• lost my password of windows server 2003 enterprise edition

  I use windows server 2003, enterprise edition. I forgot windows administrator (only one user in my system) to connect password. How to reset the password or how to connect in.other the format option of os because data and important software are here. I want it.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.