Glitches video while trying to change

Similar Questions

• slide show does not and 'error occurred while trying to change modules.

  I've been using Lightroom + module slide show for years, but suddenly it does not! When I start lightroom, whenever it says 'an error has occurred while trying to change modules' and I can't listen to extracts, to play or export slideshows. I tried computer restart, does not help. I need for a client this morning! Help please!

  Hi Jeng,

  Please visit the link below and follow the steps.

  Troubleshooting Guide for errors that can occur when you change the modules in Lightroom

  Kind regards

  Assani

• error message trying to run a clean boot "an access error was returned while trying to change a service."

  While trying to solve a problem with IE 8, I have a problem trying to run a clean boot.  When I start up I get a message on change in the config file. Click ok and sys config is displayed. Now, if I make a modification, OR not, I get an error message - "an access error was returned while attempting to change a service. You may need to log on using an administrator account to make the specified changes. "First of all I am logged on as administrator, secondly I get this error even when I select"normal start ". I used the clean boot before without problem.  Any ideas?  I am running win xp sp3.  I started having problems after the sp3 upgrade.

  Given that you are not using the standalone SP3 Installer AND since McAfee was working at the time of installation, that's what I'd do (well, I would do it only if I was almost 100% convinced there was no malware on my system):

  1. download the McAfee removal tool.

  2. download the installation file for the free version of Avira AntiVir.

  3. download the standalone SP3 Installer.

  4. download the standalone installer of IE8.

  5. physically disconnect from the Internet.

  6 turn off the automatic updates (temporarily).

  7 uninstall McAfee.

  8 run the McAfee removal tool to make sure that all other loose ends are supported.

  9 Uninstall SP3.

  10. run the system restore, select the before date SP3 has been installed.

  11 uninstall IE8 (and IE7, if necessary). Reason: It is important to be at the level of IE6.

  12 install the SP3. Reset.

  13 Installing IE8. Restart twice.

  14 install AntiVir.

  15 re - connect to the Internet.

  16. download and install the update of AntiVir.

  17 go into Windows Update and install all post-SP3 SECURITY update (stay away from any optional object).

  18 re-rockers automatic updates.

  After the back if you need links to the downloadable.

• Painted Windows Trusted Installer, refusing permission for administrator accounts, while trying to change the paper

  Original title: Windows Trusted Installer, refusing permission for administrator accounts

  I have a netbook with Windows 7 starter.

  Trying to change the wallpaper (trivial, I know) I realized that even as an administrator I am blocked for this. I tried to change the permissions of the records, but the options are grayed out.
  Would be interested to know
  (1) if there is a way around that?
  (2) what are the other rights are denied to me although it is my own machine and me being logged as administrator?
  If there is no way this tour without the upgrade of Windows (paid) or switch to Linux (free)?
  Thanks in advance for any help

  Hello

  Method 1, the only option is to upgrade the operating system. Unfortunately there is no alternative workaround.

• video downloaded on my computer from an SD card, can not get the sound of these videos while trying to play

  Original title: uploaded the video on my computer from an SD card

  I've just uploaded 45, very short, videos from SD card to my video library on my laptop.  I'm sure that I've adjusted all the volumes on my laptop, but there is no noise coming from the videos at all.  My laptop I s on the possible sound highes and fact that the buzzing when something is strong. The videos all had sound until I downloaded.  Help, please

  Hello

  1 are. what type of video files?

  2 do you mean you can see the video only and no sound in fate?

  3. you play these files on windows media player?

  4. are you able to play other files stored on the computer?

  Check for file types supported by windows media player 12 using the bottom of the article. If the type of video file that you are trying to read is not supported then you may need to install the codec to play.

  Windows Media Player C00D1199

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

• I recently installed Thunderbird on a new computer Windows 8.1. While trying to change the storage location of my emails to another disk, the program will not o

  Thunderbird does not open and I get the following message "Thunderbird is already running, but does not." The former Thunderbird process must be closed to open a new window. »

  I tried to uninstall and reinstall Thunderbird, but this has not solved the problem.

  Any ideas how I can fix the problem please.

  Kind regards
  Neil

  Restart your computer
  Or
  Use the Task Manager to kill the Thunderbird running task.

  If does not work, delete the parent.lock file in your profile folder.

• Error message Exception Type: B5C2EE48 while trying to change the parental control filter

  I'll be back just to use family safety for my pc to control the use of my grandchildren.  Whenever I try to change one of their parameters and filtering, I get this message: Exception Type: B5C2EE48

  Is there any help to fix this?

  Thank you

  Hi Judy,.

  I'm sorry to know that the problem is not resolved.

  Please try to remove the family safety filter and install again on the Windows 7 computer.

  Follow the steps in the article below:

  http://Windows.Microsoft.com/en-in/Windows-Live/Family-Safety-remove-uninstall-FAQ

  Hope this information helps, let us know if you need more assistance.

• [HELP] H264 video camera trying to change HelloVideoCamera

  I am very new to recording video and video encoding of the animals.

  In this line, I have error 22

   

  camera_error_t error = camera_start_encode(mCameraHandle, NULL, NULL, NULL, NULL, NULL);
  
  fprintf(stderr, "camera_start_encode() error %d", error); // It returns 22
  

  I checked here https://developer.blackberry.com/native/reference/core/com.qnx.doc.camera.lib_ref/topic/camera_error... what is the error 22, but I do not see the error with 22 values

  Here's my complete code

  HelloVideoCameraApp::HelloVideoCameraApp(bb::cascades::Application *app) :
          QObject(app),
          mCameraHandle(CAMERA_HANDLE_INVALID),
          mVideoFileDescriptor(-1)
  {
      mViewfinderWindow = ForeignWindowControl::create().windowId(QString("cameraViewfinder"));
      mViewfinderWindow->setUpdatedProperties(WindowProperty::Position | WindowProperty::Size | WindowProperty::Visible);
  
      QObject::connect(mViewfinderWindow, SIGNAL(windowAttached(screen_window_t, const QString &, const QString &)), this, SLOT(onWindowAttached(screen_window_t, const QString &,const QString &)));
  
      mStartFrontButton = Button::create("Front Camera").onClicked(this, SLOT(onStartFront()));
      mStartRearButton = Button::create("Rear Camera").onClicked(this, SLOT(onStartRear()));
      mStopButton = Button::create("Stop Camera").onClicked(this, SLOT(onStopCamera()));
      mStopButton->setVisible(false);
      mStartStopButton = Button::create("Record Start").onClicked(this, SLOT(onStartStopRecording()));
      mStartStopButton->setVisible(false);
  
      mStatusLabel = Label::create("filename");
      mStatusLabel->setVisible(false);
  
      Container* container = Container::create()
          .layout(DockLayout::create())
          .add(Container::create()
              .horizontal(HorizontalAlignment::Center)
              .vertical(VerticalAlignment::Center)
              .add(mViewfinderWindow))
          .add(Container::create()
              .horizontal(HorizontalAlignment::Left)
              .vertical(VerticalAlignment::Top)
              .add(mStatusLabel))
          .add(Container::create()
              .horizontal(HorizontalAlignment::Center)
              .vertical(VerticalAlignment::Bottom)
              .layout(StackLayout::create()
                          .orientation(LayoutOrientation::LeftToRight))
                          .add(mStartFrontButton)
                          .add(mStartRearButton)
                          .add(mStartStopButton)
                          .add(mStopButton));
  
      app->setScene(Page::create().content(container));
  }
  
  HelloVideoCameraApp::~HelloVideoCameraApp()
  {
  }
  
  void HelloVideoCameraApp::onWindowAttached(screen_window_t win, const QString &group, const QString &id)
  {
      int i = (mCameraUnit == CAMERA_UNIT_FRONT);
      screen_set_window_property_iv(win, SCREEN_PROPERTY_MIRROR, &i);
      i = -1;
      screen_set_window_property_iv(win, SCREEN_PROPERTY_ZORDER, &i);
      screen_context_t screen_ctx;
      screen_get_window_property_pv(win, SCREEN_PROPERTY_CONTEXT, (void **)&screen_ctx);
      screen_flush_context(screen_ctx, 0);
  }
  
  int HelloVideoCameraApp::createViewfinder(camera_unit_t cameraUnit, const QString &group, const QString &id)
  {
      if (mCameraHandle != CAMERA_HANDLE_INVALID)
      {
          qDebug() << "camera already running";
          return EBUSY;
      }
  
      mCameraUnit = cameraUnit;
  
      if (camera_open(mCameraUnit,CAMERA_MODE_RW | CAMERA_MODE_ROLL,&mCameraHandle) != CAMERA_EOK)
      {
          qDebug() << "could not open camera";
          return EIO;
      }
  
      qDebug() << "camera opened";
  
      //camera_set_video_property(mCameraHandle, CAMERA_IMGPROP_VIDEOCODEC, CAMERA_VIDEOCODEC_H264);
  
      camera_error_t error = camera_set_video_property(mCameraHandle,
                                                                  CAMERA_IMGPROP_VIDEOCODEC, CAMERA_VIDEOCODEC_H264,
                                                                  CAMERA_IMGPROP_WIDTH, 640,
                                                                  CAMERA_IMGPROP_HEIGHT, 352,
                                                                  CAMERA_IMGPROP_FRAMERATE, (double)30.0);
  
      if(error == CAMERA_EOK)
          {
                  qDebug() << "VIDEO PROPERTY SUCCESS";
          }
          else
          {
                  qDebug() << "VIDEO PROPERTY ERROR: " << error;
          }
  
      if (camera_set_videovf_property(mCameraHandle,CAMERA_IMGPROP_WIN_GROUPID, group.toStdString().c_str(),CAMERA_IMGPROP_WIN_ID, id.toStdString().c_str()) == CAMERA_EOK)
      {
          qDebug() << "viewfinder configured";
  
          if (camera_start_video_viewfinder(mCameraHandle, NULL, NULL, NULL) == CAMERA_EOK)
          {
              qDebug() << "viewfinder started";
              mStartFrontButton->setVisible(false);
              mStartRearButton->setVisible(false);
              mStopButton->setVisible(true);
              mStartStopButton->setText("Start Recording");
              mStartStopButton->setVisible(true);
              mStartStopButton->setEnabled(true);
              return EOK;
          }
      }
  
      qDebug() << "couldn't start viewfinder";
  
      camera_close(mCameraHandle);
      mCameraHandle = CAMERA_HANDLE_INVALID;
      return EIO;
  }
  
  void HelloVideoCameraApp::onStartFront()
  {
      qDebug() << "onStartFront";
  
      if (mViewfinderWindow)
      {
          // create a window and see if we can catch the join
          if (createViewfinder(CAMERA_UNIT_FRONT,mViewfinderWindow->windowGroup().toStdString().c_str(),mViewfinderWindow->windowId().toStdString().c_str()) == EOK)
          {
              qDebug() << "created viewfinder";
          }
      }
  }
  
  void HelloVideoCameraApp::onStartRear()
  {
      qDebug() << "onStartRear";
  
      if (mViewfinderWindow)
      {
          // create a window and see if we can catch the join
          if (createViewfinder(CAMERA_UNIT_REAR,mViewfinderWindow->windowGroup().toStdString().c_str(),mViewfinderWindow->windowId().toStdString().c_str()) == EOK)
          {
              qDebug() << "created viewfinder";
          }
      }
  }
  
  void HelloVideoCameraApp::onStopCamera()
  {
      qDebug() << "onStopCamera";
  
      if (mCameraHandle != CAMERA_HANDLE_INVALID)
      {
          // closing the camera handle causes the viewfinder to stop which will in turn
          // cause it to detach from the foreign window
          camera_close(mCameraHandle);
          mCameraHandle = CAMERA_HANDLE_INVALID;
          // reset button visibility
          mStartStopButton->setVisible(false);
          mStopButton->setVisible(false);
          mStartFrontButton->setVisible(true);
          mStartRearButton->setVisible(true);
      }
  }
  
  void HelloVideoCameraApp::onStartStopRecording()
  {
      qDebug() << "onStartStopRecording";
  
      if (mCameraHandle != CAMERA_HANDLE_INVALID)
      {
          if (mVideoFileDescriptor == -1)
          {
              soundplayer_play_sound_blocking("event_recording_start");
  
              char filename[CAMERA_ROLL_NAMELEN];
  
              if (camera_roll_open_video(mCameraHandle,&mVideoFileDescriptor,filename,sizeof(filename),CAMERA_ROLL_VIDEO_FMT_DEFAULT) == CAMERA_EOK)
              {
                  qDebug() << "opened " << filename;
  
  //                if (camera_start_video(mCameraHandle,filename,NULL,NULL,NULL) == CAMERA_EOK)
  //                {
  //                    qDebug() << "started recording";
  //                    mStartStopButton->setText("Stop Recording");
  //                    mStopButton->setEnabled(false);
  //                    mStatusLabel->setText(basename(filename));
  //                    mStatusLabel->setVisible(true);
  //                    return;
  //                }
  
                  camera_error_t error = camera_start_encode(mCameraHandle, NULL, NULL, NULL, NULL, NULL);
  
                                  if(error == CAMERA_EOK)
                                  {
                                          qDebug() << "Encoding started\n";
                                          mStartStopButton->setText("Stop Recording");
                                          mStopButton->setEnabled(false);
                                          mStatusLabel->setText(basename(filename));
                                          mStatusLabel->setVisible(true);
                                          return;
                                  }
                                  else
                                  {
                                          qDebug() << "Encoding Failed\n";
                                  }
  
                                  fprintf(stderr, "camera_start_encode() error %d", error);
  
                  qDebug() << "failed to start recording: " << error;
                  camera_roll_close_video(mVideoFileDescriptor);
                  mVideoFileDescriptor = -1;
              }
  
              soundplayer_play_sound("event_recording_stop");
          }
          else
          {
              soundplayer_play_sound("event_recording_stop");
              camera_stop_encode(mCameraHandle);
              qDebug() << "stopped recording";
              camera_roll_close_video(mVideoFileDescriptor);
              mVideoFileDescriptor = -1;
              mStartStopButton->setText("Start Recording");
              mStopButton->setEnabled(true);
              mStatusLabel->setVisible(false);
          }
      }
  }
  

  Any help is appreciated. Please, I beg you. Thank you.

  Thank you... I eliminated the camera_start_encode function

  my main problem was I really need to encode H264 video recording... and now I have the solution... Knobtviker taugtht me... I used the BestCam sample...

  added to this camera_init_video_encoder(); to the constructor

  and added this line after the opening of the camera

  camera_set_videoencoder_parameter (mHandle, CAMERA_H264AVC_BITRATE, 1000000, CAMERA_H264AVC_KEYFRAMEINTERVAL, 3, CAMERA_H264AVC_RATECONTROL, CAMERA_H264AVC_RATECONTROL_VBR, CAMERA_H264AVC_PROFILE, CAMERA_H264AVC_PROFILE_HIGH, CAMERA_H264AVC_LEVEL, CAMERA_H264AVC_LEVEL_4);

  These properties too

  QByteArray groupBA is mFwc-> windowGroup () .toLocal8Bit ();.
  QByteArray winBA is mFwc-> windowId () .toLocal8Bit ();.
  ERR = camera_set_videovf_property (mHandle, CAMERA_IMGPROP_HWOVERLAY, 1, CAMERA_IMGPROP_FORMAT, CAMERA_FRAMETYPE_NV12, CAMERA_IMGPROP_WIN_GROUPID, groupBA.data (), CAMERA_IMGPROP_WIN_ID, winBA.data (), CAMERA_IMGPROP_WIDTH, CAMERA_IMGPROP_HEIGHT, 720, 720, CAMERA_IMGPROP_MAXFOV, 0);
  ERR = camera_set_video_property (mHandle, CAMERA_IMGPROP_WIDTH, CAMERA_IMGPROP_HEIGHT, 720, 720, CAMERA_IMGPROP_AUDIOCODEC, CAMERA_AUDIOCODEC_AAC, CAMERA_IMGPROP_STABILIZATION, 1); CAMERA_IMGPROP_VIDEOCODEC, CAMERA_VIDEOCODEC_AVC1,

  now I can record video in H264 format.

• Multiple messages while trying to change the attributes of the user, check service cannot resolve the identity of the user

  Hello

  When you try to modify a user, I got this message. It's not compatible but it appeared second time while I captured a screenshot.

  
  

  

  What could be the problem here. Please suggest

  Thank you

  EXTWEBLOGIC was in a disabled in IMO State because it was the date of expiry.

  Now we are not the problem now.

  Thank you

• How to reset a bios password on Aspire 5570Z? I deleted mine while trying to change

  I am giving my Aspire 5570Z to my neighbor and I wanted to remove the bios password.  I went into the bios and delete the password and pressed on enter new password and confirm.  Now I'm locked up.  Help, please!

  I want to thank the entire community for the help! I was able to reset the password is by disconnecting the CMOS battery for an hour then without replacing the HD or the battery and reconnect the AC adapter. Then I booted the machine past POST. I unplugged the AC and reassembled the machine. He now starts without the password of the bios. I hope it helps someone who has the same problem. Thanks again to all!

• Why lightroom says "an error has occurred." trying to change modules

  I am trying to download some pictures on LIGHTROOM 2015 CC - and when I click on the library, he said: "year error occurred while trying to change modules ' what have I done wrong?

  [Ask in the correct forum allows... Left comments for Lightroom... MOD]

  Hello

  This problem normally occurs when the files of Adobe to launch Lightroom do not have read/write permissions.

  Please follow this article changing the error modules and grant permissions to required files

  Here's a double thread Lightroom: "an error occurred when attempting to change modules."

  Let us know if this helps

  ~ Assani

• I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

  I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

  Can drag you across the message in the Outbox overview to get the Red delete button? It's been a while since I had paste an email in the Outbox, so I don't remember if that's possible.

  IF your account is an IMAP account, try to delete the e-mail on the Mac. Actions sync between devices in IMAP email, so they should be in the Outbox on the server and you should be able to get to them in the Mail from Mac application, use you it, or in a web browser on the server.

  IF this is not possible for some reason, try the mail application to the phone reboots and the closing force force the phone and then try again. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Blow up the Swipe on application brief mail app to close

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• In window xp sp3, while I m trying to change the MAC ID of the loopback network adapter, its reflected in the registry but shows don't not in al/ipconfig or network connection details

  In the window xp sp3 while I m trying to change the MAC ID of the loopback network card.

  Its reflecting in the registry but does show is not in the details of network connection or ipconfig/all

  its very urgent for me so please help me out to solve this problem

  Note--> I tried to reproduce the same configuration in 5 systems XP SP3 but no luck! I so think its bug of XP SP3 because even works great for XP SP2 & 2007

  Hello

  You can follow the steps from the link below: http://social.technet.microsoft.com/Forums/en/itproxpsp/thread/0e1bf137-01e3-4dd5-9ce0-d686e6934ce4

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• I accidentally choose Canada French instead of English while trying to set up my account.  I can't read the French.  How to change my account to ENGLISH, please!

  I accidentally choose Canada French instead of English while trying to set up my account.  I can't read the French.  How can I change my account to the ENGLISH language, please?

  Hi sharie59301931,

  Where do you read in French, the language of the application or the default language on your Adobe account?

  Please go to Adobe ID & Sign In using your Adobe ID, under the tab accounts, you will be able to choose your preferred language.

  Kind regards

  Nicos

• a disk error has occurred while trying to write the following file

  I was working on my video and I put in a video file and a 10 seconds later, I get an error saying "a disk error occurred while trying to write the following file.

  and audio of the video was not working I close Premiere Pro and open again to do the same thing and it happens again if you know how to fix this please tell me I need to change my video so I can get it to the top on youtube tomorrow.

  I contacted support and it turns off everything, I had to do was move the first clip on the desktop... lol Thanks much for the great help! Sorry for the trouble