GlobalAutomatic with voidable wait interval

Similar Questions

• x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

  Hello

  recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

  Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

  Any help would be appreciated.

  Hello

  This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
  Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
  What is some external device connected to your Qosmio laptop?

  Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• How can I replace the same clips with the same interval of time (same settings)?

  Dear Adobe Premiere CS5 Forum,

  I have the following problem, and I would look forward to receiving solutions:

  As I couldn't cut my video with clips in avi codecs (it is very difficult to cut in avi codecs, except that you have a very fast computer), I converted my raw clips in lower codecs. Then I cut my video in low quality codecs. My video is now ready to export.

  But before I want to export my video, I need to replace all the clips in avi codes so that my video is in good quality.

  Now the problem:

  How can I replace the clips (poor quality video codec codec avi), in order to have the same clips in a different codec always the same interval of time. I want the replaced clip immediately have the same interval of time.

  For example: a raw whole clip takes 2 minutes. But just a part / interval of the clip (from 01:00 minute 01:10 minutes) is shown in the video. Now I want to replace this clip with the same clip in avi codec. But it must be the same interval (from 01:00 minute 01:10 minutes).

  I tried to replace a clip. But they each have a different time interval (the lower quality clip is from 01:00 to 01:10 minutes and if I would like to replace the same clip in avi codec is the time interval between 0:00 to 0:10 minutes).

  How can I replace the clip with the same interval of time?

  Thanks in advance

  Leonardo

  Hold down the Alt + Shift; It is Shift that maintains the reference timecode. In addition, this will work only if your proxy clips contains timecode. If they all start to 00:00:00:00, this will not work for you.

• WFQ with tail waiting

  Dear friends,
  I am not able to understand the relationship between the parameter QUEUE WAITING and Conversation value of WFQ.
  I put this concept in my lab and concluded that "SHOW INTERFACE" command shows the tail parameters waiting in the QUEUE to EXIT and Conversation in parameter of the CONVERSATION.
  I reduced the line waiting at its minimum and observed value packages were lost when flows are higher that the queue active. Then,

  I reduced the conversion to its minimum and observed value packages were lost when flows are higher that the queue active

  My understanding on this is tail waiting FIFO and WFQ is used the maximum value where an aggressive fall will happen in CDT either tail drop and DAVID will happen. Then, TAIL WAITING should be of higher value than the value of the Conversation.

  Am I wrong? Please let me know your point of view if I am deviant

  best regards & thanks in advance

  Sairam

  Hello Sairam,

  In this case, if i have different traffic flows, then ultimately all will be in class-default only.Thus, that much flows may be created inside class-default. Here what is the tool used to drop the excess flows as CDT does in typical WFQ??
  

  There are several mechanisms here:

  • You can use the command limit the queue to set the maximum size of the queue by default together (which includes all lines of conversation if the WFQ is activated in the default queue)
  • You can use the DAVID on the default queue at disposal for proactive drops based on chance, until the queue is full

  Note If you know that there is some delay can behave badly, or that require special treatment, you should not place in the default class but rather a special class for them and set the QoS provisions separately. The default queue should be considered as the best effort queue. The router will attempt to give a fair treatment to all streams, but with no special guarantees. If you want these guarantees so the flow is not supposed to be in the default queue.

  Also note that even if there was no CDT, WFQ himself mechanism would work enough just because its principle is always at the service of the queue that has been most neglected (the so-called equity of max - min). That means CDT is a further improvement - if a packet arrives it's limit, but which can be managed to be sent back in time then fine - let it go at the expense of some other packages that would be the case, or so later sent. WFQ in implementation of Cisco, as active directly on an interface, is basically a closed solution and untweakable - you cannot change its basic behavior - so he's trying to be as smart as possible. The CDT in plain WFQ allows to ensure a package of priority higher who arrive later can still be queued at the expense other packets in different queues. You can do it in CBWFQ by the presence of a separate category for these packages, while WFQ, it was somehow cope alone. The CDT is a fine concept in plain WFQ with many implications. However, with the advent of CBWFQ, it is kind of superfluous.

  NOTE: Initial topic (CDT > HQ) is still not clarified. please help, however efforts has been taken from my side to get the answer
  

  Well, sometimes, the answer is simple is perhaps the closest to the truth - we try to find an answer sophisticated to a simple fact - the test of validation on the relationship between the TRC and HQ just is not implemented in IOS. Maybe the filmmakers forgot to do, maybe they wouldn't have to do as you can use it to effectively disable the CDT... There are several places in the IOS CLI where it is up to you to enter the healthy values of mind and IOS will not try to outsmart you and tell you that you are wrong. Maybe it's just one of these.

  Best regards

  Peter

• When I stopped my PC, I get a black screen with message (waiting for substantive programmes close).

  When I stopped my pc I get a black screen with message (waighting for background programs close) then under this 'force close' yes/no of suggestions?

  Original title: background programs

  Depends, if shortly after the sys stops, don't worry, otherwise follow the advice given

• I misordered that Photoshop elements for Windows but have a Mac. I have a restitution order number with refund waiting for return. How can I return a download?

  How can I return a download? I waited to get instructions for over a week now. I ordered in error for Windows, but I'm on a Mac.

  You don't have to return it, just go here

  Product order | Platform, language Exchange

• Average data with columns of type of data INTERVAL DAY (99) second (99)

  Hi all
  I'm trying to get an average of the run_duration column in the view of oracle JOB_RUN_DETAILS SCHEDULER(11 g R2). The data type for the run_duration column is INTERVAL DAY (3) to SECOND (0).
  How we can perform mathematical functions (sum, avg, diff) on the columns with data types (INTERVAL DAY) (3) OF SECOND (0) or TIMESTAMP WITH TIMEZONE?
  
  Thanks in advance
  VB

  user5526066 wrote:
  How we can perform mathematical functions (sum, avg, diff) on the columns with data types (INTERVAL DAY) (3) OF SECOND (0) or TIMESTAMP WITH TIMEZONE?

  For some reason any Oracle allow to add/subtract intervals but does not aggregate the. If you don't care about fractions of a second:

  select  owner,
          job_name,
          numtodsinterval(avg((sysdate + run_duration) - sysdate),'day') average_run_duration
    from dba_scheduler_job_run_details
    group by owner,
             job_name
  /
  
  OWNER                          JOB_NAME                                                          AVERAGE_RUN_DURATION
  ------------------------------ ----------------------------------------------------------------- -------------------------------
  EXFSYS                         RLM$SCHDNEGACTION                                                 +000000000 00:00:00.015873015
  ORACLE_OCM                     MGMT_STATS_CONFIG_JOB_1                                           +000000000 00:00:00.000000000
  SYS                            PURGE_LOG                                                         +000000000 00:00:00.290322580
  ORACLE_OCM                     MGMT_CONFIG_JOB                                                   +000000000 00:00:00.479999999
  ORACLE_OCM                     MGMT_CONFIG_JOB_1                                                 +000000000 00:00:01.439999999
  SYS                            AUTO_SPACE_ADVISOR_JOB                                            +000000000 00:00:19.680000000
  EXFSYS                         RLM$EVTCLEANUP                                                    +000000000 00:00:00.000000000
  ORACLE_OCM                     MGMT_STATS_CONFIG_JOB                                             +000000000 00:00:01.000000000
  SYS                            GATHER_STATS_JOB                                                  +000000000 00:01:52.400000000
  
  9 rows selected.
  
  SQL> 
  

  SY.

• ORA-00600: internal error code, arguments: [qmcxeExUseLoc93] with xmltable and big bows in the CLOB column

  Hi all

  Running the following:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  PL/SQL Release 11.2.0.2.0 - Production

  "CORE 11.2.0.2.0 Production."

  AMT for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production

  NLSRTL Version 11.2.0.2.0 - Production

  Create a view of a relational table and XMLTABLE and extract nodes from voluminous of the xmltable, mapped text using COLUMNS. I concatenate the text nodes in an xml element in the XQuery xmltable, simple sequencing:

  <CONTENT>
  {$i/summary/text(),$i/know/text(),$i/considerations/text(),$i/look_for/text(),
  $i/nc//text(),$i/level1//text(),$i/level2//text(),$i/ipocc//text()}
  </CONTENT>
  

  SQLDeveloper query execution and right on when I scroll the 50th outcome accordingly set or... DB connection is closed and stack following error appears:

  [ORA-00600: internal error code, arguments: [qmcxeExUseLoc93], [], [], [], [], [], [], [], [], [], []]

  00600 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s] '.

  * Cause: It's the generic internal error for Oracle program number

  exceptions.    This indicates that a process has encountered a

  Exceptional condition.

  * Action: Report as a bug - the first argument is the internal error number

  I went site Oracle Support to use the 'search' for these types of errors, but he found nothing to the argument: "qmcxeExUseLoc93"... any ideas short of opening an SR with Oracle support? S/n reports that no problems with memory or tablespace... trace files report a stack trace is complete:

  [ORA-00600: internal error code, arguments: [qmcxeExUseLoc93], [], [], [], [], [], [], [], [], [], []]

  = Dump for incident 32114 (ORA 600 [qmcxeExUseLoc93]) =.

  2014-04-08 07:31:51.369

  dbkedDefDump(): from the default crash dumps (flags = 0x2, level = 3, mask = 0 x 0)

  -Run SQL statement for the current session (sql_id = 0qn4zxr0stgjh).

  SELECT ID, CONTENT of ort_active_content_en_vw

  -Call trace stack memory-

  call call entered the argument values in hex

  location point type (? means dubious value)

  -------------------- -------- -------------------- ----------------------------

  skdstdst () + 40 bl 107ca 9980 FFFFFFFFFFD99A8? 000002004?

  000000001? 000000003?

  000000000? 000000002?

  000000001? 000000000?

  ksedst1 () + 104 call skdstdst() FFFFFFFFFFD89B0? 000002004?

  110641000? 1098C 1164?

  110641000? 000000000?

  FFFFFFFFFFD8AE0? 700000007?

  ksedst () + 40 call ksedst1() 3030000000000? 002050033?

  1098C 1158? 700000000025C?

  000000000? 000000000?

  1098C07B8? 000000000?

  dbkedDefDump (+ 2828) call ksedst() FFFFFFFFFFD8B90? 000000000?

  000000000? 000000000?

  000000000? 000000000?

  000000000? 300000003?

  …….

  -Binary stack dump-

  = FRAME [1] (skdstdst () + 40 - > 107ca 9980) =.

  defined by pointers frame 0xffffffffffd88b0 and 0xffffffffffd8840

  CALL TYPE: bl ERROR REPORTED: no COMPONENT: (null)

  0xffffffffffd8840 to 0xffffffffffd88b0 memory dump

  FFFFFFFFFFD8840 0FFFFFFF FFFD88B0 42422220 098C 1158 [...] BB '... X]

  08EBE70C FFFFFFFFFFD8850 00000001 00000001 10641000 [... d..]

  FFFFFFFFFFD8860 00000000 00000000 0FFFFFFF FFFD89E8 [...]

  FFFFFFFFFFD8870 0FFFFFFF FFFD99A8 00000000 00002004 [...].

  FFFFFFFFFFD8880 00000003 00000000 00000000 00000001 [...]

  FFFFFFFFFFD8890 00000000 00000000 00000000 00000002 [...]

  FFFFFFFFFFD88A0 00000000 00000001 00000000 00000000 [...]

  = SETTING [2] (ksedst1 () + 104-> skdstdst()) =.

  defined by pointers frame 0xffffffffffd89b0 and 0xffffffffffd88b0

  TYPE of CALL: call ERROR REPORTED: no COMPONENT: KSE

  0xffffffffffd88b0 to 0xffffffffffd89b0 memory dump

  FFFFFFFFFFD88B0 0FFFFFFF FFFD89B0 42422220 10317 68 A... 1zh BB"]

  FFFFFFFFFFD88C0 1033F758 00000001 00000001 0014963C [... <...] 3.X]

  FFFFFFFFFFD88D0 09ED0CA9 1873F04F 28422848 73743231... Sagna (B (Hst21]

  FFFFFFFFFFD88E0 0FFFFFFF FFFD89B0 00000000 00002004 [...].

  FFFFFFFFFFD88F0 00000001 00000001 10641000 098C 1164 [... d...d]

  FFFFFFFFFFD8900 00000001 10641000 00000000 00000000 [... d...]

  ……

  -Status of the Dump process (2).

  ===================================================

  STATE OF THE PROCESS

  -------------

  Global information process:

  process: 0x700000012b18de8, call: 0x70000000b880ee0, xact: 0x0, curses: 0x700000012bf11f0, usrses: 0x700000012bf11f0

  in_exception_handler: no

  ----------------------------------------

  SO: 0x700000012b18de8, type: 2, owner: 0x0, flag: INIT /-/-/ 0x00 if: 0 x 3 c: 0 x 3

  proc = 0x700000012b18de8, name = process, queue = ksu.h LINE: 12451 ID:, pg = 0

  (process) Oracle pid:42, ser:153, called heart/high: 0x70000000b880ee0/0x70000000b880ee0

  flags: (0x0).

  Flags2: (0 x 800), flags3: (0x0)

  Intr error: call error 0,: 0, sess error: error of txn, 0, 0

  queue intr: vacuum

  ksudlp FALSE to the location: 0

  (post info) last message received: 0 0 0

  Last message received-card: no post

  last process affect me: no

  Last message sent: 0 0 26

  Last message sent-map: ksa2.h LINE: 282 ID:ksasnd

  last process posted by me: 6 1 700000012af9058

  (info from latch) wait_event = 0 bits = 0

  Process group: by DEFAULT, proc pseudo: 0x700000012b4db88

  Info of the o/s: user: tst214, duration: UNKNOWN, ospid: 4370650

  OSD pid Info: Unix process pid: 4370650, image: oracle@mldb2385

  ----------------------------------------

  SO: 0x700000010430ba0, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1

  proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0

  (FOB) flags = 2050 fib = 700000010de3758 incno = 0 waiting for IO cnt = 0

  fname=/tst214_01/oradata/TST214/temp01.dbf

  FNO = 201 lblksz = 8192 fsiz = 36608

  ----------------------------------------

  SO: 0 x 700000010430578, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1

  proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0

  (FOB) flags = 2050 fib = 700000010de2b40 incno = 0 waiting for IO cnt = 0

  fname=/tst214_03/oradata/TST214/ort_data01.dbf

  FNO = 6 lblksz = 8192 fsiz = 25600

  ----------------------------------------

  SO: 0x70000001042ff38, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1

  proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0

  (FOB) flags = 2050 fib = 700000010de1310 incno = 0 waiting for IO cnt = 0

  fname=/tst214_01/oradata/TST214/sysaux01.dbf

  FNO = 2 lblksz = 8192 fsiz = 89600

  ----------------------------------------

  SO: 0x70000001042f910, type: 10, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: c: 0x1 0x1

  proc = 0x700000012b18de8, name = FileOpenBlock, leader is ksfd.h LINE: 6337 ID:, pg = 0

  (FOB) flags = 2050 fib = 700000010de0d10 incno = 0 waiting for IO cnt = 0

  fname=/tst214_01/oradata/TST214/System01.dbf

  FNO = 1 lblksz = 8192 fsiz = 96000

  ----------------------------------------

  SO: 0x700000012bf11f0, type: 4, owner: 0x700000012b18de8, flag: INIT /-/-/ 0x00 if: 0 x 3 c: 0 x 3

  proc = 0x700000012b18de8, name = session, lead = ksu.h LINE: 12459 ID:, pg = 0

  (session) sid: 41 ser: 1263 trans: 0x0, creator: 0x700000012b18de8

  indicators: (0 x 8000045) USR /-flags_idl: (0 x 1) BSY /-/ - /-/ - / -.

  Flags2: (0 x 40008) - / -.

  DID:, DID in the short term:

  TXN branch: 0x0

  Oct: 3, prv: 0, sql: 0x70000000c59dbd0, psql: 0x70000000b196c38, user: 73/ORT_READ

  ksuxds FALSE to the location: 0

  name of the service: the USERS of SYS$

  Customer details:

  Info of the o/s: user: norman.jonker, duration: unknown, ospid: 6224

  machine: G4021165 program: SQL Developer

  application name: SQL Developer, hash value = 1012150930

  Battery active waiting:

  No waiting; last waiting ended 2,617517 sec ago

  Wait state:

  fixed_waits = 0 flags = 0 x 21 limit = 0 x 0 /-1

  History of waiting for session:

  elapsed time of 2,617552 sec from last wait

  0: waiting for 'direct path read '.

  number = 0 x 6, first s/n = 0 x 2901, block cnt = 0 x 2

  wait_id = 2222 seq_num = 2223 snap_id = 1

  wait time: snap = 0,000035 s, exc = 0,000035 s, total s = 0,000035

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,029003 seconds time elapsed

  1: expected "asynch descriptor resize.

  #aio in circulation = 0 x 0, the current limit of aio = 0xc8, this capping aio = 0 x 145

  wait_id = 2221 seq_num = 2222 snap_id = 1

  wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003

  wait time: max = 307445734561 min 49sec

  wait charges: calls = 0 os = 0

  After 0,000710 seconds time elapsed

  "2: expected ' SQL * Net message to client"

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2220 seq_num = 2221 snap_id = 1

  wait time: snap = 0,000005 dry, exc = 0,000005, total = 0,000005 sec

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,001452 seconds time elapsed

  3: expected ' SQL * Net client message'

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2219 seq_num = 2220 snap_id = 1

  wait time: snap = 0,499033 s, exc = 0,499033 s, total s = 0,499033

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,000034 seconds time elapsed

  "4: expected ' SQL * Net message to client"

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2218 seq_num = 2219 snap_id = 1

  wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,000048 seconds time elapsed

  5: expected ' SQL * Net client message'

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2217 seq_num = 2218 snap_id = 1

  wait time: snap = 0,061319 s, exc = 0,061319 s, total s = 0,061319

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,000028 seconds time elapsed

  "6: expected ' SQL * Net message to client"

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2216 seq_num = snap_id 2217 = 1

  wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,000048 seconds time elapsed

  7: expected ' SQL * Net client message'

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2215 seq_num = 2216 snap_id = 1

  wait time: snap = 0,063435 s, exc = 0,063435 s, total s = 0,063435

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,000045 seconds time elapsed

  "8: expected ' SQL * Net message to client"

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2214 seq_num = 2215 snap_id = 1

  wait time: snap = 0,000003 s, exc = 0,000003 s, total s = 0,000003

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,000070 seconds time elapsed

  9: expected ' SQL * Net client message'

  pilot-id = 0 x 54435000, #bytes = 0 x 1, = 0x0

  wait_id = 2213 seq_num = 2214 snap_id = 1

  wait time: snap = 0,060780 s, exc = 0,060780 s, total s = 0,060780

  wait time: max = infinite

  wait charges: calls = 0 os = 0

  After 0,000030 seconds time elapsed

  The Session history sampled session 1263 series 41

  ---------------------------------------------------

  History of the sampled session is built by sampling

  the session target all the 1 second. The sampling process

  capture to each sample, if the session is in an active waiting.

  a wait inactive, or not in a wait. If the session is in a

  active wait interval then one is indicated for all samples

  the session was in the same active waiting. If the

  session is in an inactive waiting or not waiting for

  consecutive samples then one interval is indicated for all

  consecutive samples. If we post these consecutive

  samples in a single interval session may NOT be permanently

  inactive or not in a wait (the sampling process is unclear).

  The history is displayed in reverse chronological order.

  sampling interval: 1 s, max 120 sec history

  ---------------------------------------------------

  [3 samples, 07:31:51 - 07: 31:53]

  not waiting at each sample

  [18 samples, 07:31:33 - 07: 31:50]

  waiting in each sample slowed

  [2 samples, 07:31:31 - 07: 31:32]

  not waiting at each sample

  [42 samples, 07:30:49 - 07:31:30]

  waiting in each sample slowed

  [4 biopsies, 07:30:45 - 07: 30:48]

  not waiting at each sample

  [7 samples, 07:30:38 - 07: 30:44]

  waiting in each sample slowed

  [sample 1, 07:30:37]

  waited for ' SQL * Net break/reset for customer ', seq_num: 1149

  P1: 'driver id' = 0 x 54435000

  P2: 'pause '? = 0 x 0

  P3: "= 0x0

  time_waited: 0,013444 sec (sampling interval: 0 sec)

  [14 samples, 07:30:23 - 07: 30:36]

  waiting in each sample slowed

  [4 biopsies, 07:30:19 - 07: 30:22]

  not waiting at each sample

  [26 samples, 07:29:53 - 07:30:18]

  waiting in each sample slowed

  ---------------------------------------------------

  History of the sampled plenary:

  longest_non_idle_wait: ' SQL * Net break/reset for customer '

  [sample 1, 07:30:37]

  time_waited: 0,013444 sec (sampling interval: 0 sec)

  ---------------------------------------------------

  the temporary object counter: 2

  ----------------------------------------

  Virtual discussion:

  kgskvt: 700000011f06658, sess: 700000012bf11f0 sid: 41 ser: 1263

  VC: 0, proc: 700000012b18de8, id: 41

  News consumer group: OTHER_GROUPS (upd? 0) maps: DEFAULT_CONSUMER_GROUP, orig:

  vt_state: 0x100, vt_flags: 0xA030, blkrun: 0, numa: 1

  inwait: 0

  place where last insched series: kgskthrrun

  place where insched last reset: kgskthrrun2

  place where inwait the last value: NULL

  place where inwait last reset: kgskbindfast

  is_assigned: 1, in_sched: 0 (0)

  QCLs: 0, qlink: FALSE

  vt_active: 0 (pending: 1).

  vt_pq_active: 0, dop: 0

  used quanta: 0 (cg: 0) usec, num penalty: 0

  start of CPU time: 0

  idle time: 0, time: 0 (cg: 0)

  yields of processor: 0 (cg: 0), expected: 0 (cg: 0), wait time: 0 (cg: 0) usec

  e/s expected: 0 (cg: 0), wait time: 0 (cg: 0) usec

  ASL in queue wait times: 0, time: 0 (NEWS 0, 0 cg)

  PQQ in queue wait times: 0, time: 0 (NEWS 0, 0 cg)

  Violation of the time to wait in queue: 0

  aborted calls: 0, num is exec hit limit: 0

  Cancel current: max k 0: 0 k

  I/O credits: small = 0 General = 0

  I/O waiting credits: small = 0 General = 0

  KTU Session Commit Cache Dump for IDLs:

  XID: 0x0009.008.00002025 RCS: flg 0x0000.00cd4e90 = 0x1

  XID: 0x0006.018.00001f5a RCS: flg 0x0000.00cd4e90 = 0x1

  XID: 0x0009.015.00002024 RCS: flg 0x0000.00cd4e90 = 0x1

  XID: 0x0005.004.00001f30 RCS: flg 0x0000.00cd4e90 = 0x1

  XID: 0x0006.021.000011ed RCS: flg 0x0000.00cd4e90 = 0x1

  KTU Session Commit Cache Dump for Non-IDLs:

  ----------------------------------------

  KKS - UOL used: 0 locks (used = 19, free = 3)

  KGX atomic operation Log 70000000b30a840

  Mutex 0 (0, 0) oper idn 0 NONE

  Cursor Parent uid 41 DTS 4 w/h 7 slp 0

  Oper = pt1 NONE = 0 pt2 pt3 0 = 0 =

  PT4 = 0 = 0 = 0 stt u41

  KGX atomic operation Log 70000000b30a890

  Mutex 0 (0, 0) oper idn 0 NONE

  parasite of the slp whr 6 table uid 41 DTS torrent 4 0

  Oper = NONE pt1 = 70000000d1485e8 pt2 = pt3 148678 = 0 70000000d

  PT4 = 0 = 0 = 0 stt u41

  KGX atomic operation Log 70000000b30a8e0

  Mutex 0 (0, 0) oper idn 0 NONE

  FSO uid 41 DTS mutex 0 w/h 0 slp 0

  KGX atomic operation Log 70000000b30a930

  Mutex 0 (0, 0) oper idn 0 NONE

  FSO uid 41 DTS mutex 0 w/h 0 slp 0

  ----------------------------------------

  KGL - UOL SO Cache (total = 182, free = 107)

  KGX atomic operation Log 70000000 b 045538

  Mutex 0 (0, 0) oper idn 0 NONE

  Library Cache uid 41 DTS 5 w/h 85 slp 0

  Oper = 0 = 70000000b 227350 pt2 = pt3 = 0 70000000c5df180 pt1

  PT4 = 0 = 0 = 0 ub4 pt5

  KGX atomic operation Log 70000000 b 045590

  Mutex (0, 0) 70000000c5b11d8 idn 69fd5d60 oper NONE

  Library Cache uid 41 DTS 4 w/h 77 slp 0

  Oper = pt1 pt2 70000000934fb60 0 = = 0 = 0 pt3

  PT4 = 0 = 0 = 0 ub4 pt5

  KGX atomic operation Log 70000000b0455e8

  Mutex 0 (0, 0) oper idn 0 NONE

  Library Cache uid 41 DTS 4 w/h 79 slp 0

  Oper = 0 = 70000000b 225950 pt2 = pt3 = 0 70000000c382cb8 pt1

  PT4 = 0 = 0 = 0 ub4 pt5

  KGX atomic operation Log 70000000 b 045640

  Mutex (0, 0) 70000000b225a80 idn ae8e84f6 oper NONE

  Library Cache uid 41 DTS 4 w/h 70 slp 0

  Oper = 0 = 70000000b 225950 pt2 = 0 = 0 pt3, pt1

  PT4 = pt5 0 = 0 ub4 = 4

  KGX atomic operation Log 70000000 b 045698

  Mutex (0, 0) 70000000b225a80 idn ae8e84f6 oper NONE

  Library Cache uid 41 DTS 4 w/h 70 slp 0

  Oper = 0 = 70000000b 225950 pt2 = 0 = 0 pt3, pt1

  PT4 = 0 = 0 = 0 ub4 pt5

  KGX atomic operation Log 70000000b0456f0

  Mutex 0 (0, 0) oper idn 0 NONE

  Library Cache 41 DTS uid 0 w/h 0 slp 0

  Oper = pt1 pt2 = pt3 0 = 0 0 = 0

  PT4 = 0 = 0 = 0 ub4 pt5

  KGX atomic operation Log 70000000 b 045748

  Mutex 0 (0, 0) oper idn 0 NONE

  Library Cache 41 DTS uid 0 w/h 0 slp 0

  Oper = pt1 pt2 = pt3 0 = 0 0 = 0

  PT4 = 0 = 0 = 0 ub4 pt5

  KGL SO hide

  SO = 70000000c5df180 link = 70000000c5df1f0 [70000000b115e38, b 70000000, 045520]

  FLG = 8000 use its 700000012bf11f0 = 700000012bf11f0 =

  SO = 70000000b115dc8 link = 70000000b115e38 [70000000c5df380, 70000000c5df1f0]

  FLG = 8000 use its 700000012bf11f0 = 700000012bf11f0 =

  SO = 70000000c5df310 link = 70000000c5df380 [70000000c7abab8, 70000000b115e38]

  FLG = 8000 use its 700000012bf11f0 = 700000012bf11f0 =

  Hello

  I'm not saying that it will solve the problem, but you must use XMLCast in this case, not XMLSerialize.

  Try also with fn:local - name instead (unless you need information namespace as well):

  Select (xmlcast)

  XMLQUERY)

  "for $dcrContent in fn:collection("oradb:/PUBLIC/DATA_CAPTURE_RECORD_CONTENT") / ROW.

  where $dcrContent/DATA_CAPTURE_RECORD_CONTENT_ID = xs:decimal ($id)

  "return fn:local - name($dcrContent/CONTENT_XML/*)"

  from 608 as "id".

  contents of return

  )

  as varchar2 (100)

  )

  Double;

• How to create a new action Set with script?

  Is this possible?

  I managed to go full screen and full screen with 1 second interval in the actions of the output.

  But I can't seem to create a temporary folder SET for the action menu item Insertion

  Here are the scripts:

  = Open fullscreen =.

  var idslct = charIDToTypeID ("TPCV");

  var desc9 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref8 = new ActionReference();

  idMn var = charIDToTypeID ("min");

  var idMnIt = charIDToTypeID ("MnIt");

  var idscreenModeFullScreen = stringIDToTypeID ("screenModeFullScreen");

  Ref8.putEnumerated (idMn, idMnIt, idscreenModeFullScreen);

  desc9.putReference (idnull, ref8);

  executeAction (idslct, desc9, DialogModes.NO);

  wait 1 second

  $.sleep (1000);

  = of fullscreen =.

  var idslct = charIDToTypeID ("TPCV");

  var desc6 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  ref5 var = new ActionReference();

  idMn var = charIDToTypeID ("min");

  var idMnIt = charIDToTypeID ("MnIt");

  var idscreenModeStandard = stringIDToTypeID ("screenModeStandard");

  ref5.putEnumerated (idMn, idMnIt, idscreenModeStandard);

  desc6.putReference (idnull, ref5);

  executeAction (idslct, desc6, DialogModes.NO);

  = actions clear game 1 =.

  var idDlt = charIDToTypeID ("Dlt");

  var desc7 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  ref6 var = new ActionReference();

  var idASet = charIDToTypeID ("ASet");

  Ref6.putName (idASet, 'Set 1');

  desc7.putReference (idnull, ref6);

  executeAction (idDlt, desc7, DialogModes.NO);

  App.Refresh)

• The time in the calendar works with an hour between start and end time

  Until recently, calendar worked OK but now only allow me to have a time of an event if I try to put the first gestures of time within an hour of arrival times longer.

  There is a symbol link to the right of the time of departure and arrival. If the points are in contact with the time interval that you have in the calendar (by default 60 minutes) options will be kept when you change the time. Click on this symbol, and the points will be away and stop this action.

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• Problems starting with the Satellite C870D - 11 X

  I have a Satellite C870D - 11 X 8.1 Windows running.

  The laptop was running progressively slower, but now when I start it sticks on the screen "Toshiba Leading Innovation". Finally, he moves to a blue screen saying that your computer needs repair "a required device cannot be accessed 0000185 0xc error code. I tried a reset by pressing '0' at the beginning, to the top and I see the process of disk recovery hard screen and press enter for Yes and I get the "Toshiba Leading innovation" screen with please wait. After the circular points are displayed for a few moments, then the screen becomes white.

  Unfortunately, I don't have a recovery disk to try this option. I'm looking at a hard drive failure? I hear a feint clicking of the HD as if hunting for something.

  If I buy a disc is it likely that I will be able to reinstall using this media?
  Thanks a lot for your suggestions.

  At first, I must say that you have made a mistake after that you bought your laptop you didn t create disk recovery or the so-called recovery media with the original version of Windows 8 that you got with your machine.
  I really do not understand why so many people make this mistake and do not create bootable recovery media installation backup image recovery.

  In any case, on this path virtual that is not easy to say what the problem is here and, in my opinion, the better you can do is to back up all your important data and install original recovery image. After doing this, you can test the functionality with the factory settings.

  A few days ago, I found interesting options paper of recovery limited after update to Win8.1 - http://aps2.toshiba-tro.de/kb0/TSB4403L30001R01.htm
  You should try to install the HARD drive recovery original anyway. How is it that you can read on http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm or http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm (Win8/8.1).
  Order recovery media can be your last step.

  Clicking noise could be sign of drive HARD doesn't work well anymore. Is the warranty for your machine still valid?

• Bad step Wait() runtime

  Hello

  I have a very strange problem. We still use TestStand 3.1 for our tests of production and we are currently running TestStand 12 different test stations.

  I just got a new nootbook that I use for the development of tests, but now I have a very strange problem. When I run the tests with a Wait step (execution)

  time for this step takes 3 - 5 times longer than the number of seconds that I put in the expression. For example if I do a sequence containing a single

  Wait (5) this should take about 5 seconds to perform the step but it takes 15 to 25 seconds to run! And to make it more strange, the execution time report

  Watch 5.1 seconds? All the other steps I run runs at a normal speed, my own or types of standard step (at least what I've discovered so far).

  I had installed on my laptop, older without problems TestStand. I have tested both on XP with and without SP3, but no luck!

  Now I must find out if TestStand or my laptop that is causing this problem, it is not easy to explain this problem for people a HP. What clock makes the

  Wait for the use of the service and could I do a sequence of debugging that could give me more information about my problem.

  I have now reinstalled my phone 3 times and reinstalled TestStand 6 times so I do desperate to me, anyone could give me some ideas what could cause this problem.

  Concerning

  Anders

  Although this talk article of a bug related to an AMD processor and your machine has a processor intel CPU, maybe the solution it might still work. I think what the computer to use a different hardware clock by adding the indicator/usepmtimer to the boot.ini file.

  http://support.Microsoft.com/kb/895980

  This links makes it sound like the problem or a similar problem can also occur with intel hyperthreading or enhanced speed step systems and circumvention of boot.ini even use/usepmtimer is one of the suggested options.

  http://support.Microsoft.com/kb/835730

  I don't know how he is sure to try this workaround but I understand if you do not prefer. I would definitely support upward everything you have is important before you try the boot.ini changes incase she ends up making the machine unbootable. If you do not end up try this workaround it please let us know how it goes.

  Thank you

  -Doug

• NEITHER 3202 - SAMPLING INTERVAL ADJUSTMENTS

  Hello!

  I need clarification on the concept of sampling interval wrt nodes NI WSN (3202, 3212, 3226) training and even with my kit. I list the approaches that I have known,

  • Approach I: in Structure case 'Node target VI'--> 'Start '. Choose the mode "VI Driven" and together with a constant interval sampling.
  • Approach II: In the case 'Node target VI'--> 'Start' Structure. Choose mode "Host Driven" and the sampling of sets interval via "user Project dialog box" (*.lvproj), choose particular node, do a right click-> properties-> tab node-> change the number in the collection interval box. "»
  • Approach III: Using the API host WSN, something as pic shown sideways

  Question 1: I tried this III, with "VI Driven" approach, does this independent approach of mode affect you?

  • Approach IV: In 'Target node VI'--> placing 'ConfigNode VI' and set the sampling interval according to the logic of the user in "Sample" and other Structures of the case. [Interval sampling mode: VI led]

  Question 2: Considering III feasible approach in mode 'Led VI', did any priority is offered by node approach III against approach IV?
  [For example.] I set my Interval(say 45 <->60) of sampling to change in the order through certain events trigerred (BatteryLevels, LinkQ, SampledDataRange) and using VI host suite III approach I want to change the sampling interval (say 30) for a while. [So now sampling 30 sec interval remains static or it keeps changing (45/60) to 30 when the target node running sample structures & received Msgs.]

  Question 3: We have the chance to change the sampling for each channel (AI0... intervals AI3) or in groups of two channels and even with digital channels, if there is no restriction of internal hardware ADC/MUX invloved let me know.
  [For example.] If my sample data (range: 1-6 volts) to channel AI0 grave in particular area (say, 1 - 3V), work are perpendicular, but if it falls in the range (say 4-6 v) I want to change the sampling interval, while other channels (AI1... [A13) remain the same, regardless of either]

  Hi PP_BABU,

  This would work except that it might be difficult to corelate the sample # in the message to the user for the IO AI1 variable. A better approach may be to enter the data locally and combine multiple samples in a user-defined variable. You can change the AI1 data to a string, and then concatonate several in a larger string. Then send bursts of data. That should help with the battery life you could send each second instead of constantly backdata.

  Provided that the user has taken, there is no limitation. You just need to drop a basic I/O node and select digital i/o > User LED , then right click on the same I/O node, then select change write.

  See you soon,.

  Brian has

  R & D Product Support Engineer | WSN/network DAQ

  National Instruments