good review secure Channel problem

Similar Questions

• good review secure Channel 4 is valid for vcp 5?

  Hi all

  If I bought a voucher for exam vcp 4 (reduction / not given) is it which vcp 5 review?

  can someone tell me

  Kind regards

  Knani V.

  According to this FAQ page, Yes:

  http://myLearn.VMware.com/portals/certification/FAQs.cfm?UI=www_cert&PID=certification

• Managed review secure Channel before taking the course... can I still get emerit?

  Hello

  I recently took and passed the VCP 310 FRONT to register for the certified course exam.  I got an ID VCP Pearson VIEW when I joined the review and now I would like to take the class needed to become fully certified.  So my questions are the following:

  1. is there a problem with the first of the exam and the class of a second (depending on the certification page VMWare he States simply that you must have once the review and a class to be approved, but don't not specify that one is one prerequisite for the other so I guess as long as you have both, then any order that you do)?

  2. How do I link my ID VCP ACROSS Pearson during registration to review so that I get credit for both.  I have an account to connect to the Pearson VIEW to access their site, but I can't seem to use for the login and password for the site of VMWare.  I want to make sure that I did not test for nothing and I get full credit for all this hard work.

  3. is there a time limit that the review is good for before you take the class... in other words, the available class I take in my are is not until March, which is 2 months from the date I took and passed the exam.

  Advice or information would be greatly appreciated, as I've worked at length and seriously take this test and do not want my efforts to get lost.

  Thanks in advance,

  Chris

  Congratulations on the exam!

  (1) there is no problem take the class after you have passed the exam - VMware prefers the class before the exam, but many people did this way

  (2) certification VMware should be able to relate the test and the class, but safely when you are finished her email certification VMware ([email protected]) with the ID of the secure Channel be received from Pearson/VIEW and ID of the class, the class dates, location and the name of the VMware authorized training center if you took it through ART and this will ensure your certification.

  (3) there is no official deadline but VI-4 will be out some time this year and if VMware follows what they did with ESX 2/VC1.x class about 9 moths after out general, that the class will not be

  available - also note that 3 VI - 3 classes will qualify for the VCP - install and configure, deploy, Secure and analyze (DSA) and fast-track

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Review secure Channel 5 requirements

  Hello friends,

  II have my test VCP510 scheduled November 30, 2011, end of this month, and I'm a VCP4.

  According to the current site VCP4 VMware -there is no requirement of course until February 29, 2012. Means I can give the test without attending any class.

  But I heard from my friends that one of the guys in sales HP told him that it is mandatory to attend classes, and he attended him.

  Someone could erase me please, I'm worried about it.

  Thanks in advance.

  You are right.  If you are a VCP4, you can go to the exam VCP5 with no prerequisite of classtime, prior to the date you sketched out.

• Dear I want to give VM ware secure Channel but it is possibel without ID VM I can give the review I have 3 + Exp on VMware

  My dear, I want to give VM ware secure Channel but it is possible without ID VM I can give the review I have 3 + Exp on VMware

  If you follow the link I posted on VCP6-NV, you can find.

• Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

  I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

  I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

  Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

  "Connection to the blog error."

  An error occurred while trying to connect to your blog

  The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
  You must correct this error before proceeding. "

  Please help me solve this problem. Your valuable advice is apprecited. Thank you.

  Post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect/default.aspx

• EA6500 FTP security & server problem

  I'm fairly knowledgeable about computers, but still learning my way around networking.  There are two ethernet cables to come to my house with optical fiber connections high speed.  There is a router on both of them and I have therefore 2 WI - fi networks.  I have a 2 t HD Seagate attached to the EA6500. Access to records is enabled and I have a name of user and password set up so I can see the drive of all my devices.  It is mapped as a network drive on a window 8.1 machine and a Windows 7 laptop.  I'll try to set up a ftp server on one of them, but when I'm at the EA6500 last week, I discovered that he has built in ftp server.  I turned and tried to open a session.  I tried networks as well as the 4 g network on my phone.  4g just give an error, but the connection request came when I was on one of the networks.  My credentials have been accepted, the ftp screen came, but no drive and no file.  I spent an hour for most useless on the phone with Linksys support, but have learned one thing: when I disabled access to the records, and then the disc with all the files appeared.  However, no newspaper was asked.  Enter "ftp: / / {ipv4 address}" product page ftp in my browser with all the files revealed.  In addition, access to the files on my network was of course now disabled.  I asked the tech by the lack of a connection is required, and she told me that I only knew that the address ip so no one else would be able to see my files.  I almost called her a stupid at this point.  Unfortuneatley she seemed not very security conscious or not even aware of how ridiculous that was.  I have re-enabled access to the folder and the disabled of course ftp again.  A refresh of the page in the browser returned to the blank page of ftp.  Is it possible to use effectively the built in Server ftp securely?

  Now if I'm in a remote location, I can connect account Smart Wi - Fi, will disable access to files and turn on ftp temporarily, then access my files and ftp, then backtrack.  It's a work-around that I don't like.  Someone managed using the Linksys FTP safely while maintaining access to local folders?  Also, is there a way to limit the connection to a particular username?  The customer accounts and admin (password w/router) have already been awarded to highly secure passwords, but the one I used for local access, not so much.  If I get this job, which apparently won't be enough, because it doesn't seem to be a way to make the distinction between a local and a remote user in the settings of the router.

  Hold on!   AHA!  I think that I thought about it!  The correct answer to your question should have been no. only, I created a user, but I did not know that the 'actions' were added to the user by clicking on the blue word 'actions' next to my username.  So NOW, when I try it in Google Chrome, voila! I can see the files.  I turned it back off again, so I can create a combo/part of the user with a good password.  One problem remains.  I tried adding the actions first by clicking on the admin user.  Now, I don't see a way to edit the admin user to disassociate the part.  I really didn't have admin access.  I was only adding the part as a test, but now it seems that it is there to say.  Please don't tell me I have to reset the router to get rid of it.

  What a pity that phone support is not able to explain on the management of stocks.  Just ask me about stocks helped helped focus my attention on the right box.  Thanks, chadster766!  I ' l count this issue resolved and leave the issue with admin for another ad if I can't understand me.

• Port-channel problem between fabric Interconnect and vPC N7K

  Hi all

  I have a problem with the Port Uplink channel between fabric interconnect with N7K using vPC

  It's my network for the UCS deployment topology

  

  N7K I configured vPC for red link and green linkto the fabric Interconnect A I has configured the Port-Channel with Member is Port 1 and Port 2, uplink is red link. Interconnection fabric B, I have configured the Port-Channel with Member's Port 1 and Port 2, uplink's green link.

  The interface port-channel on N7K show is good, each port-channel upwards and have all members. But the fabric Interconnnect, when I see in the UCS Manager, the status of the Port-Channel on Fabic A and fabric B dysfunction not more info: no operational Member. Although all the link is a link to the top and I've got the status of the Port Channel is enabled in the UCS Manager. When I see the properties Port 1, Port to Port-Channel 2, I see the number of members status is: individual. This means channel port is not up and no member in this configuration. I want to using the port-channel load balance and more bandwidth for the uplink of 20Gig. I don't understand why?

  Please help me solve this problem, I have to send the screenshot of UCS Manager when I show the status of the Port-Channel and Port-member in port-channel to reach items.

  Can someone help me solve this problem, thanks a lot. References, please include elements for more details on the fault.

  Thank you

  Trung.

  Hello Nguyen,

  Since the two N7k please collect:

  SH cdp nei

  SH run membership in. X int

  SH sum port-chan

  Thank you

  Matthew

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• Secure channel required

  I'm getting following error while trying to open the Web site "http://www.icicipruamc.com/Sitefinity/Error404.htm?aspxerrorpath=/InvestCorrectly/Invest-the-RIGHT-SIP-amount/3-steps-to-arrive-at-the-RIGHT-SIP-amount.aspx".

  Error details:
  Secure channel required
  This virtual directory requires a browser that supports the configured encryption options.

  You must type the s after http, see:

  • https://www.icicipruamc.com/Sitefinity/Error404.htm?aspxerrorpath=/InvestCorrectly/invest-the-right-SIP-amount/3-steps-to-arrive-at-the-right-SIP-amount.aspx

  But the link takes you to a page not found.

• developer wants to pay me for a good review

  I gave a bad review to an application.  The Director contacted me and said that he would give me $10 to remove and write a good review

  Contact iTunes support and let them know: https://www.apple.com/emea/support/itunes/contact.html

• HP mini 110 unlock, after successful computer unlock, website security certificate problem

  Web site security certificate problem

  Ok

• What is the best way to get certificate of secure Channel, including CCNA, expensive etc. without training?

  Currently, what is the best way to get certificate of secure Channel, including CCNA, etc.?

  In the past, there is a way to get VCP using CCNA without expensive training

  Path 2 on this page: VCP6-NV Certification

  There was already an expiration date on the possibility of using a Cisco certification have the implemented training obligation, but the expiration date has been removed.

• Secure Channel 5 = this new VCP5-DV?

  Hi guys

  I got my 5 secure Channel in January now I see too much any Stu on certification in the vmware Web site... and I want to be sure that my VPC 5 is the same as this new VCP5-DV?

  Thank you very much

  VCP5-DV is the new name for what was VCP5. Here is the new game of the suffixes:

  -DV = the = vSphere Datacenter Virtualization

  -DT = Desktop = View

  -Cloud = Cloud = vCloud Director

• How to check a guy is secure Channel?

  Hello

  A guy says to secure Channel 4 and give me a number.

  Is it possible to check?

  Thank you

  I don't know, can, you can send an email to [email protected] to validate the VCPID.

  Do not have any site to validate directly

  See also http://communities.vmware.com/thread/188735