EA6500 FTP security & server problem

Similar Questions

• See 4.5 Security server problems since installing SSL certificate

  I'm having some very strange problems with my view view connection Server 4.5 (front and back) running. I hope someone could shed some light on the problem, because I have tried everything I know to do this job properly.

  Before installing a certificate self-signed server of external connection again, I was running the default VMware certificate. Everything worked very well in this configuration. I installed a new self-signed certificate and now I'm having intermittent problems, the connection to the server:

  1. in the connection from a windows machine I CAN reach the site URL/HTTP to download the client from the view. Once I run the client to view I got the following error: failed connection to connect to the server view. Network error.

  2. I tried to connect via the IP address of the server, ensure that the external URL is correct (everything worked fine before the installation of the SSL certificate).

  3. completely removed security server and reinstalled, restart the services etc. Still not connect on some machines. Connecting from a Wyse compatible iPad still works, never a problem.

  4. If I connect the VPN of the company on the machine that does not work, then launches the Client to view and connect everything works as it should. When I disconnect the VPN and try to connect again, I can connect very well! So I need to connect to the VPN to connect to browse... its really weird. I checked DNS etc and everything is identical with the default certificate. I did so that machines that have problems approve the certificate and I also followed the Cisco ASA firewall logs, I do not see happneing anything different between periods of work and does not.

  Someone at - he never lived something along these lines or can think of anything I can try?

  Thank you!

  I came across this same thing.  The conflict is between the customer to view and your new self-signed SSL certificate.  More precisely the thing causing the problem is the version of the wininet.dll file provided with IE8.  The wininet.dll file provided with IE8 causes some kind of conflict with the customer view 4.5 (if using other SSL certificate that the server generated one) and will not allow the client to view 4.5 software to connect to your server security.  I reported this to VMware (2 weeks ago) so that they should be aware of the problem.

  If you remove your new SSL certificate and return to the one created by the display server then everything works perfectly again.  If you are using a machine with IE6 or IE7 XP remove IE8, it also works very well.  I tried taking the file wininet.dll from XP SP3 IE6 machine and restore this file after installing IE8 and everything seemed to work ok, but probably not the best solution.

  Bottom line is until VMware resolves the conflict with their client to view, you may not use any SSL certificate (other than that of the server is) If you are going to connect to windows machines running IE8 or newer.

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• changed Kapersky security with mcafee and cannot retrieve e-mail messages. problems of server on the computer. McAfee can enter my password and my email. they say that I have a server problem.

  changed to mcafee kapersky and cannot receive my e-mail address. McAfee can use my username and password and receive my email. they say that I have a server problem.

  Hello

  I suspect that the problem is with your e-mail service provider, therefore, suggest you to contact your provider of messaging for better help.

• How will I be informed when getting in and out a site with a secure server

  I can't find where to set the option for this. I could on Firefox 3.6
  Firefox 3.6 gives me a pop up that says I'm entering or leaving a site with a secure server. It's PARAMETERS in the Messages of warning on the Security tab in the window options. When you push the button PARAMETERS, a number of checkboxes allow for different parameters. I can't find it in Firefox 8.

  The settings for the 5 Warning Messages has been removed from security section in Firefox 4 and newer versions. These settings should be accessible through Subject: config now. So you're looking for the first and the third in the list below "parameters of the former in Firefox 3.6 on the Security Panel.

  See: http://kb.mozillazine.org/About:config

  1. type of topic: config in the URL bar and press the Enter key.
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = security.warn_
  4. Double-click the pref in the lower panel on the subject: config display to toggle to true or false according to the descriptions below (scroll down to security.warn to see these particular preferences)
     • http://kb.mozillazine.org/About:config_entries #Security.

  Parameters of the ancients in Firefox 3.6 on the Security Panel
  
  Display a dialog warning when:

  • I'm about to view an encrypted page
    • Pref: security.warn_entering_secure
  • I'm about to view a page that uses low-grade encryption
    • Pref: security.warn_entering_weak
  • I leave a page encrypted to one that is not encrypted
    • Pref: security.warn_leaving_secure
  • I submit, information that is not encrypted
    • Pref: security.warn_submit_insecure
  • I'm about to view an encrypted page that contains unencrypted information
    • Pref: security.warn_viewing_mixed

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• KEYCHAIN ISSUE: You have chosen not to trust "COMODO RSA organization Validation Secure Server CA"

  Hi, I work with Umoja, an application that uses the citrix receiver. I use it to work with windows computers, but now and then I also access my mac home. All of a sudden (not sure what happened, really!) I started to get this message: you have not chosen to approve "COMODO RSA organization Validation Secure Server CA", the issuer of server security you can tell me exactly what I need to do? I tried to add the certificate as a result of Keychain some instructions I found on the internet, but it does not work, I'm not even sure that I managed to do. I would be very grateful if someone could help me solve this problem.

  Keychain Access.app > Browse your own and bunch of system for the certificate in question > mark it reliable.   If trust you him.

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Server problems

  Hello everyone,

  I have problems connecting to the server. I recently downloaded Microsoft Office 365, and I have the product installed on my computer. However, when I click on the ""Sign in"button in the upper right corner of Microsoft Word (Excel, Powerpoint) it sends a message saying"Sorry, we have temporary server problems."" At first I thought the problem was just of Microsoft Office, but now, I've seen other products I was installing have said similar things such as "cannot connect to Server", "is there a problem with your connection", or 'server '.

  I have wifi and there are always 4-5 bars in the lower right corner, and I am able to use the internet browser (I use it as I type this). The first thing I looked at was the server information. Most of the information went over my head, because I am a novice at this stuff, but the essential, that they mentioned was to connect the clock of the internet via the control panel. I did and I still have these server problems. Another thing to check, I saw was the bing via the command prompt. I tried and it said 0% loss (4 envoys and 4 received) and server problems have continued.

  I have a Windows 7 Inspiron 537 s, and my internet is provided by AT & T.

  This office has been mainly sitting back where it has not been used much (my brother and I used sporadically). I decided to move instead of easier access, because it's a good computer.

  The main culprit, I can think of is the wireless network adapter I bought, so this computer is Wi-Fi (instead of an Ethernet cable on the floor), but like I said that the computer has a strong wifi connection. The adapter is a Netgear AC1200.

  No other devices on my network are facing this problem, it's just this office.

  So, just a little recap

  1. I have a wifi connection, and I am able to use internet browsers and download files.
  2. I can't connect to the "servers", such as Microsoft Office.

  Any help would be appreciated, because I can't seem to find someone with a similar problem on the internet.

  This is a link to where I posted this question in the Forum Office (Accident, I didn't see it), where a person tried to help me and there is a little more information. Aid has led to post me here, and the guest in this thread is the same as exact as this thread.

  http://answers.Microsoft.com/en-us/Office/Forum/office_365hp-office_install/server-problems/e8fdace1-4CEC-4B36-95a8-8508dc90af45

  Hello

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, it seems that there could be a chance of third-party applications, services or security software are limiting to connect.

  So I would you suggest temporarily disabling security software and perform the clean boot and then try to sign in to Office 365 and see if it helps.

  Step 1

  Try temporarily disabling security software and then see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Step 2

  Perform a clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  In addition to that I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Hope it would help. If the problem still persists, post back with the current state of your computer and the result of the suggestions, we will be happy to help you.

  Kind regards

• Windows Live Mail send any emails. "Your server has terminated suddenly the connection. The possible causes for this include server problems. »

  original title: live mail not sending

  My windows live mail 7 stopped sending a reason any.  It has worked very well.  It receives mail ok.

  Whenever I try to send an email I get the following error

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Topic 'task on cognition.
  Server: 'smtp.tiscali.co.uk '.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  Any help appreciated.

  It can be something as simple as turning off email in your anti-virus program that is unnecessary and can cause this. However, if it does not, ask the experts in this forum. Here, few people use this e-mail program.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• PCoIP Raccordementvia security server view Horizon 6.2.1

  Given the problem with connecting to the office via a security server view VDI.  She starts to connect, is a black screen for about 10 seconds, then disconnects.

  This is my setup

  All ports are two-way.

  Public IP address is NAT for the Security server in the DMZ.  I have TCP 80, TCP 443, TCP & UDP 4172 open ports on the Security server.  (I tested by telnet to the public IP address on 80, 443, & 4172.  It works)

  From the Security server in the DMZ, I ports TCP 4001, 8009, 4172, 3389 UDP 4172 open from the Security server to my login server in-house.

  From the Security server in the DMZ I have ports TCP 3389, TCP and UDP 4172 open for VDI desktops.

  I am able to connect to computers correctly using the server for internal connection on PCoIP.  It is only on the Security Server I'm getting the black screen problem.

  Any ideas?

  I found actually just the problem.  I had to activate the secure gateway PCoIP and I had to enter the public IP address and the port 4172.  Initially, I activated it and he used internal connection server address it and it did not work so then I changed it to the IP address of the DMZ security server and it still doesn't work.  While I was reading upward on the setting that I saw that had to be the accessible public address.  Once he did that, he started to work!

• Cannot "connect as current user" via the Security Server

  Hello community,

  I had a problem using the "connect as current user" option against a network outside of the enterprise security server. Connection by manually keying in the name of user and password works very well from the outside the company network For internal connections using a connection to the server instead of security server, everything works as expected without having to manually type the name of user and password.

  Single domain

  Customer of the horizon is 3.5.2 and joined to a domain

  2 Security Server 6.2.1 x

  2 Server 6.2.1 connection x

  On one of the servers of connection I got the following error message when you try to connect through the horizon customer using the option "connection as the current user:

  2015 12-28 T 20: 21:15.207 + 01:00 INFO (B 0, 08 - 0E34) < ajp-nio-8009-exec-7 > [PAEContext] (SESSION: a774_ * _b2fb) Idle Timer executor by using 1 thread (s)

  2015 12-28 T 20: 21:15.625 + 01:00 ERROR (0744-0AEC) < MessageFrameWorkDispatch > [ws_winauth] [GSSApiProcessServerContext]: negotiate failed. Error 0 x 0000000080090300 (not enough memory is available to complete this form) {SESSION: a774_ * _b2fb}

  2015 12-28 T 20: 21:15.626 + 01:00 (B 0, 08-04 B 8) WARN < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) failed connection GSSAPI: not enough memory is available to complete this application

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) cannot close the context 7 36 d-*-00D 3 with the error: unable to locate the context requested

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiAuthFilter] (SESSION: a774_ * _b2fb) authenticate GSSAPI performance problem - GSSAPI_ERROR: GSSAPI failed: not enough memory is available to complete this application

  The connection to the server has 12 GB of memory in total and 9.5 GB of memory free/available.

  In the windows event log, the following error message appears:

  BROKER_USER_AUTHFAILED_GENERAL

  Failed to authenticate the user < UNAUTHENTICATED >

  Attributes:

  Node = hostnameofconnectionsserver.mydomain.com

  Gravity = AUDIT_FAIL

  Time = Mon 28 Dec 19:51:16 THIS 2015

  Module = broker

  UserDisplayName = < UNAUTHENTICATED >

  Source = com. VMware.VDI.Broker.filters.GssapiAuthFilter

  Recognized = true

  Just tried from a machine arrived in the area via the Security server. Cannot open a session as the current user. We also enabled on the external connections of MFA, but I don't think that should make a difference.

• javaw.exe missing on view Security Server - view 6.2.1

  Hello

  I'm trying to associate a view Security Server with a connection to the server (point 6.2.1).  Both servers run Windows 2012 r2 and ran into a new error (for me anyway).

  I have install the matching password, and when I go to install the Security Server component, I get an error of coupling .  I can access the server from the server security with https connection and think that other DMZ Firewall rules are configured correctly.

  Looking through the papers, I find a mistake on not being javaw.exe is not a recognized command.  I drill down to the path of the log entry and find that javaw.exe is not where it seems expected.  It seems to be a dynamic path created by the installation process

  serverInstUtil : 18/12/15 10:15:11 lancement « « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe »-Dcom.vmware.vdi.orchestratorj.nativelib=ws_java_nativeNODEP-Djava.net.preferIPv4Stack=true-Djava.library.path="C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\bin » -cp « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\sslgateway\lib\ * » ; «C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\lib\ * «;» check the 8009 "C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\cache" com.vmware.vdi.tunnelpairing.XmlAjpClientNew 10.97.1.129 ".

  serverInstUtil: 18/12/15 10:15:11 Matching of Java SS returned cheque ' ' C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe "' is not recognized as an internal or external command ".

  serverInstUtil: 18/12/15 10:15:11 ERROR: an unexpected error occurred while determining if advanced Security Server matching is supported

  I used this binary installer to install the server of connection corresponding without problem I've noticed so far.  I just downloaded the 6.2.1 installers yesterday (17/12/15) and the files are dated 08/12/15.   I have not found any related to the release notes for this version, or in the installation guide.

  I can certainly install java runtime and copy the files in place (although I do not know what version).

  Any suggestions or ideas?

  File this one, by virtue of be sure to double check...

  I have disabled UAC, re-directed the installer - the same error.

  I saw the event log and has detected an error (event ID 11335) MSIInstaller

  Product: VMware Horizon 6 connection Server - Error 1335. The file ' Replic ~ 1.cab ' required for this installation is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  It turns out that it was the MSI. When I have re-uploaded the file, it works beautifully.   I had just used this file 10 minutes before.  Will show measure twice... really does matter

  Save this here for others to avoid my mistake ;-)

• One of my view security server shows as "unknown" in Administrator dashboard view

  Hello

  One of my view security server (view Horizon 5.2) shows as UNKNOWN in Administrator dashboard view.

  I tried with the declared, rebooted Server services restart, still no luck.

  The stated server is accessible via RDP and the Services are running.

  Can someone help me on this?

  This problem has been resolved by disabling Windows NLB NETWORK adapter settings.

  We used Windows NLB long back for security servers, recently we removed view Security Server NLB Windows and place in F5 load balancing.

  Not sure for some reason, the Windows NETWORK load balancing service came active, disabled, and the problem solved.