GPS navigation system to crash after update 23.4.A.1.264

Similar Questions

• The night last update (May 11) caused my system to crash after re-booting.

  The night last update (May 11) caused my system to crash after re-booting. There were 4 updates that have been selected.  I've disabled the automatic update (will always to down load) and hidden updates (KB905866, KB890830, KB2509470, KB2536413). Otherwise, someone with this problem and know who is "bad"?

  The OS is Vista Ultimate, and until today, I was downloading/automatic update.

  Hi Mike,.

  Method 1:

  I suggest you to configure your system in clean boot mode and install each update on your computer. You must follow step 7 in the link to restart the computer in normal startup after the problem is resolved.

  Try to perform the update of windows and try to install an update at a time and check

  Restart the computer after the installation of each update.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 2:

  Try to manually install the update, an update at the same time by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  If the problem is not resolved by any of the methods mentioned above, you can check the link for the problems with the installation of updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Location (GPS) service no longer works after update of Os 9.3.2

  My GPS service does not work after update os on IPHONE 6 64 GB. Deleted, hard reboot as well os re - load os, I did, but still unresolved question and google Mao or Apple card does not. It seems that many Iphone user have the same problem after the Os update to 9.3.2.

  My wife also have the same model and updated to Os, but its Google map works perfectly. have online search of dome on the solution, but no luck.

  How to solve this problem?

  Hello, jayantg,

  Thank you for using communities of Apple Support.

  I see that your GPS service stopped working after the update to iOS 9.3.2. I use location Services on my iPhone, so I know how much it is important that we get this problem is solved. I have something I want you to try.

  Job to the subject of privacy and location Servicesand ensure that the location service is enabled and learn how the precision of GPS to improve, in particular, these two sections:

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  All the best.

• COMPUTER CRASHES AFTER UPDATE TO SERVICE PACK 2

  My computer crashes after updating windows service pack 2 for windows vista. I conducted analyses of virus and I'm virus-free. So, what can be the problem. I even restored the computer and updates appear and disappear until I update. I need help I have final exams in 3 days!

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• 10.11.5 update fails, the system crashes after update

  iMac 27 "end 2015, SST 1 GB, 32 GB of RAM

  After update 10.11.4 via App Store 11.5 system hangs on commissioning, all programs seem to have disappeared (they are still on the drive, but cannot be started). Tried to reinstall 11.4, works fine and all is well. Reinstall the update brings back the problem. Cannot start in safe mode. Tried to download the full OS x and install it, same problem as with the update. Not yet tried a clean install.

  someone has an idea to solve this?

  I have exactly the same problem. Unfortunately I do not have a Time Machine to return to backup.

• Atrix HD: Circles Widget crashes after update

  My circle widget freezes and crashes after a period of time since the new update. I had not had this problem before. Is anyone else having the same problem? To fix it, I need to stop the process with the system board and the widget restarts.

  Try going into the settings under apps. Then select the tab all. Then scroll down to the CircleConfig and make sure it is not disabled. Then go to circles and erase the data, and then restart your phone and see if that fixes it.

• MAX crashes after update to SP1 SMU-8381 Suite 2015 in SMU-1082 chassis

  MAX version 15.3 and 16.0 crashes after selecting the devices and interfaces. System ran fine with LabView 2014 suite. Also hangs after trying to generate a report. NO report or error log to share.

  Service request #7500455

  Problem solved. I had 2 questions.

  (1.) the USB-845 x update was not on the final distribution, the latest version to clear an incompatibility problem.

  (2.) the FAM 6584, I had was defective. The only way to detect has been by opening a project reference, and then tap properties/status to show the FMA was defective.

  Thank you

  JB

• Vista crash after update

  confused...
  after update vista Home premium my laptop for all programs crash

  You don't say whether or not you start Windows Vista.

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  Complete restore of the system as stated above to information operations.

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Post back with update KB number, you are having problems with.

  Mick Murphy

• Team Viewer crashes after update 11/11/15

  FYI after execution of updates today, Team Viewer crashes at launch.

  Name: APPCRASH application name: TeamViewer.exe Application Version: 10.0.47484.0...

  I have this resolved for now by running the system restore and have opened a support ticket with Team Viewer for them to consider.

  I'm writing this for the benefit of third parties who may run into this.  I will you update when Team Viewer responds.

  I received the following response today from Team Viewer

  "Thank you for your message. Windows has released another update to correct the problem.

  Could you please update Windows with the latest version and try again?

  If the problem persists after the update, feel free to contact us again. »

  I have conducted an audit of the updates refresh the list pending and then ran 25 updates.  This time, they do not cause a problem with team Viewer.

  I suspect that the problem was in KB3097877 that caused other issues.

  Fix security Microsoft reissues after reports of bugs, crashes

  http://www.ZDNet.com/article/Outlook-crashing-after-Windows-security-updates-you-are-not-alone/

• Windows 8 crashed after update - dual-boot

  Hello all, I installed Kubuntu in dual-boot with Windows 8 (not 8.1) a weeek ago and both ran correctly. I've used Windows later than yesterday, and... Update! Win partition crashed after the auto with the Lenovo logo and 6 balls turning constantly.

  I tried to use Boot-Repair, but it did not solve my problem.

  An error occurred during repair.

  Please write down the following URL:

  http://Paste.Ubuntu.com/9044826/

  In case you are still having a problem starting, enter this address to:

  E-mail address is removed from the privacy *.

  You can now restart your computer.

  The start-up files [the operating system currently in use - 14.04.1 LTS Ubuntu] are far from the beginning of the disc. Your BIOS can't detect them. You can try again after you create a partition/Boot (EXT4, > 200 MB, beginning of the disc). This can be done via tools such as gParted. Then select this partition via the [separate/boot partition:] [Boot Repair] option. (https://help.ubuntu.com/community/BootPartition)

  I don't know how to read these newspapers, and I kindly ask someone to read it and to tell me something. Also, I did not understand the last paragraph, sorry.

  I have an image of Windows Backup in the case and a CD of Rscue to win. He ran, but I wasn't sure of its possible 'reaction' to the presence of GRUB. is it likely to create problems for my startup parameters? I heard that he is likely to erase everything on my HD

  THINGS THAT MAY BE IMPORTANT:

  -Boot-Repair is set to "Secure starting" (checked under "advanced options"), but is not my UEFI/BIOS.

  -analyzing sda4 you notice the presence of boot.ini, it has not been deleted after revenues of bootmgr?

  Hi Max,.

  Using the restore disc, we can format Windows and we will be able to format the partition. However formatting Ubuntu can contact Ubuntu support forums http://community.ubuntu.com/contribute/support/ubuntu-forums/ since they will be able to guide you to the best.

  Hope this information is useful.

• Adobe Flash crashes after update 07/09/14.

  I updated Adobe Flash a few days ago (9/7 if I'm not mistaken) and since that time Adobe Flash frequently stops working and constantly crashes in Firefox (about 15 times according to my function of crash report) - showed a dialog screen that says it stopped operating and questioning if I want to continue to use the card or stop it.

  (I specifically have defined Flash on manual download to understand such things as the last time something like this happened after an audio Adobe update stops on Youtube - and it was a problem from Adobe.)

  
  

  The Firefox forum has a long thread on this current problem... trying to figure out if it's Firefox - but I think it's maybe Adobe (as it was in the case of Youtube).  May I recommend Adobe to install a 'feedback' accident site after updates to so that you can find these more fast - if they really are from Adobe?  The problem of Youtube took nearly two weeks to fix and I think it's because you didn't know.

  Thank you...   If you have another answer that would be great - in the meantime I will continue to use Chrome until I get a reply...

  
  

  p.s. I already turned off protect mode and hardware acceleration in Firefox to see if that helps.  This isn't.

  We shipped a new version yesterday.  It might be useful to update.

  That said, if you could provide links to submitted incident reports, I'd be happy to take a look.

  Go about: crashes

  If the link does not start with "bp", click on the link submit accident report

  Return to the about: crashes page

  Click the subject link and choose Copy link location

• video capuring crashes after update camera app!

  Video capture automatically hangs (1 second) after update to motorola to 4.0.7.5 camera application

  other applications works correctly (google camera)

• machine 2 crashed after update network adapter type E1000 VMXNET3

  What is the reason why the machine is not booting with OS after update of E1000 VMXNET3 network adapter,

  update is done via scripts

  in this case, there is a solution that allows you

  1 remove the adapter NETWORK adapter or remove the connection

  2. adding another type of VMXNET3 adapter new

  3. start Machine... If boot machine... Stop the machine

  then. Remove the new card NETWORK adapter

  and fix the old on or connect an old

  hope it will work.

• A system totally crashed after downloading the update of windows 7 (from VHP) reloaded vista starting the Dell restore partition and reattach the requirements. Now, how can I restart upgrade

  OK, here's the deal... the Dell laptop had a recurring software validation fixed an error that I couldn't keep. I would fix it, Vista should go out and update itself and then I would reboot and bang, back right to the error again, I decided to scrap Vista and install W7. I corrected the error again once restarted in a stable Outlook, downloaded files of Windows 7 upgrade and then discovered that the netframework wasn't right, so I downloaded this solution, am to halfway through it and got a system error. HA! I'll just copy this download upgrade of the window on a USB key, hover over all my personal files on the usb drive, and reinstall Vista from the Dell partition, which I did. Then, I updated all the stuff with the Advisor to upgrade of windows, is gone in Windows 7 upgrade file I moved it to the USB and realized that this point in time, I was an asshole. What a breakthrough!  OK, now how to restart the upgrade process. I paid the money, done the downloads, message, so my hands, discussed and done all the other stuff I've done since the upgrade of Windows 3.1 (each time). Now what...

  First I would contact the people who sold you download and see if they will send again free of charge - explain the problem.  I guess you still have the product key, they have sent you that shouldn't be a problem (it will work with any download the same version of Windows7).

  Then run Windows7 Upgrade Advisor to see if your system can handle Windows7 or if she need for software or material removed or updgraded: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx.  Follow the instructions he gives as a result of the program (in fact, you should do this first - then you can deal with the download).

  After that, you need to further questions in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where people who specialize in the installation and upgrade to Windows7 will be more than happy to help you in the process.  This is a forum for Vista, and you need to talk to experts in Windows7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System randomly crashes after installing the latest update of Windows 7

  I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please?

  Hi Stuart,

  I see that the computer hangs at random after installing some updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. which windows update has been installed recently?

  Let us try these steps and check the status.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Respond with more information so that we can send us your request in an appropriate manner.