Grant table with the nested column.

Similar Questions

• A better way to treat the form as a table with the variable column type?

  I wanted to make a column to return according to the status of a flag column as readonly. I have a column defined as follows in the report query.
  
  Decode (sys_flag, 'Y', APEX_ITEM. DISPLAY_AND_SAVE 3, TYPE_CODE, APEX_ITEM. SELECT_LIST_FROM_LOV (3, TYPE_CODE, 'LOV_TYPE_CODE_LOV')) AS TYPE_CODE
  
  To get the SRM process noting that column, I had to put this 'band of HTML code' to 'No', then the column attributes, I put:
  "Expression HTML" to "#TYPE_CODE #
  ' Display under "to"text display (saves the State).
  
  And then it took me to get new lines of work:
  "Default of Type" to "Expression of PL/SQL.
  'Default' to APEX_ITEM. SELECT_LIST_FROM_LOV (3, NVL(:P18_TYPE_CODE,'LOV_TYPE'), NULL, 'LOV_TYPE_CODE_LOV', ' NO')
  
  This makes large, however submit that it seems that the checksum of line used by MRU included the raw HTML generated by the APEX_ITEM package and not just the value of the column. I worked around this by including an element hidden checksum and creating a process that replaces the checksum generated automatically with my custom.
  
  Is there a better way to intercept this checksum, preferably before it is rendered on the page? I now hide the sum of hidden HTML control in the output HTML of another column, so it's a bit ugly. If not, is there an easier way to achieve what I'm looking for? I tried several combinations, and it seems to work better. It's just a shame there's no way to have a standard hidden column included in the SRM process.

  Hello

  I tried different possibilities and seems to run the following:

  Create a report questioning in NORMAL SQL function to help:

  SELECT
  APEX_ITEM.HIDDEN(1,EMPNO) || APEX_ITEM.TEXT(2,ENAME) ename,
  CASE WHEN DEPTNO = 10 THEN
   APEX_ITEM.HIDDEN(3, SAL) || SAL
  ELSE
   APEX_ITEM.TEXT(3, SAL)
  END SAL,
  EMPNO,
  DEPTNO || APEX_ITEM.MD5_CHECKSUM(ENAME, SAL) DETPNO
  FROM EMP
  

  Do not specify something special for column definitions.

  Create a button that submits the page.

  Create a PL/SQL process that runs "On submit - after calculations" and Validations, triggered by this button and using the following code:

  BEGIN
  APEX_ITEM.MULTI_ROW_UPDATE('#OWNER#:EMP:EMPNO,1:,|ENAME,2:SAL,3');
  END;
  

  I've done here: http://htmldb.oracle.com/pls/otn/f?p=55041:35

  Any element with the value of DEPTNO 10 has the value SAL, read-only, as otherwise it's editable. This is done by creating a hidden input field for the actual value, followed by the text version OR by creating a single entry field. This ensures that we have the correct number of SAL elements on the page.

  APEX_ITEM. MULTI_ROW_UPDATE is the "manual" version of the MRU that you would normally get with a form of table and works for above normal as sql based query reports. The format of this very strict is that you must always allow for two primary keys. See the text of presentation here: http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/api.htm#CHDFDACC

  Andy

• How to compare one by an element of a column with the first column in the other table?

  Hello

  I have two files into a single file has only Id numbers and the second file has table with for example the column 4, and his first column identification number.

  So I want to compare the first item in the User.ID file with the 1st column all the table file items in this column until it finds matches.

  If compare match then LED will be IT other wise LED will be OFF.

  Here as an attachment, I've attached the two file.

  Please guide me how can I do the same thing.

  Thank you much in advance.

  
  

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon

• update to column values (false) in a copy of the same table with the correct values

  Database is 10gr 2 - had a situation last night where someone changed inadvertently values of column on a couple of hundred thousand records with an incorrect value first thing in the morning and never let me know later in the day. My undo retention was not large enough to create a copy of the table as it was 7 hours comes back with a "insert in table_2 select * from table_1 to timestamp...» "query, so I restored the backup previous nights to another machine and it picked up at 07:00 (just before the hour, he made the change), created a dblink since the production database and created a copy of the table of the restored database.
  
  My first thought was to simply update the table of production with the correct values of the correct copy, using something like this:
  
  
  Update mnt.workorders
  Set approvalstat = (select b.approvalstat
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi)
  where exists (select *)
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi)
  
  It wasn't the exact syntax, but you get the idea, I wanted to put the incorrect values in x columns in the tables of production with the correct values of the copy of the table of the restored backup. Anyway, it was (or seem to) works, but I look at the process through OEM it was estimated 100 + hours with full table scans, so I killed him. I found myself just inserting (copy) the lines added to the production since the table copy by doing a select statement of the production table where < col_with_datestamp > is > = 07:00, truncate the table of production, then re insert the rows from now to correct the copy.
  
  Do a post-mortem today, I replay the scenario on the copy that I restored, trying to figure out a cleaner, a quicker way to do it, if the need arise again. I went and randomly changed some values in a column number (called "comappstat") in a copy of the table of production, and then thought that I would try the following resets the values of the correct table:
  
  Update (select a.comappstat, b.comappstat
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi - this is a PK column
  and a.comappstat! = b.comappstat)
  Set b.comappstat = a.comappstat
  
  Although I thought that the syntax is correct, I get an "ORA-00904: 'A'. '. ' COMAPPSTAT': invalid identifier ' to run this, I was trying to guess where the syntax was wrong here, then thought that perhaps having the subquery returns a single line would be cleaner and faster anyway, so I gave up on that and instead tried this:
  
  Update mnt.workorders_copy
  Set comappstat = (select distinct)
  a.comappstat
  mnt.workorders a, mnt.workorders_copy b
  where a.workordersoi = b.workordersoi
  and a.comappstat! = b.comappstat)
  where a.comappstat! = b.comappstat
  and a.workordersoi = b.workordersoi
  
  The subquery executed on its own returns a single value 9, which is the correct value of the column in the table of the prod, and I want to replace the incorrect a '12' (I've updated the copy to change the value of the column comappstat to 12 everywhere where it was 9) However when I run the query again I get this error :
  
  ERROR on line 8:
  ORA-00904: "B". "" WORKORDERSOI ": invalid identifier
  
  First of all, I don't see why the update statement does not work (it's probably obvious, but I'm not)
  
  Secondly, it is the best approach for updating a column (or columns) that are incorrect, with the columns in the same table which are correct, or is there a better way?
  
  I would sooner update the table rather than delete or truncate then re insert, as it was a trigger for insert/update I had to disable it on the notice re and truncate the table unusable a demand so I was re insert.
  
  Thank you

  Hello

  First of all, after post 79, you need to know how to format your code.

  Your last request reads as follows:

  UPDATE
    mnt.workorders_copy
  SET
    comappstat =
    (
      SELECT DISTINCT
        a.comappstat
      FROM
        mnt.workorders a
      , mnt.workorders_copy b
      WHERE
        a.workordersoi    = b.workordersoi
        AND a.comappstat != b.comappstat
    )
  WHERE
    a.comappstat      != b.comappstat
    AND a.workordersoi = b.workordersoi
  

  This will not work for several reasons:
  The sub query allows you to define a and b and outside the breakets you can't refer to a or b.
  There is no link between the mnt.workorders_copy and the the update and the request of void.

  If you do this you should have something like this:

  UPDATE
    mnt.workorders     A      -- THIS IS THE TABLE YOU WANT TO UPDATE
  SET
    A.comappstat =
    (
      SELECT
        B.comappstat
      FROM
        mnt.workorders_copy B   -- THIS IS THE TABLE WITH THE CORRECT (OLD) VALUES
      WHERE
        a.workordersoi    = b.workordersoi      -- THIS MUST BE THE KEY
        AND a.comappstat != b.comappstat
    )
  WHERE
    EXISTS
    (
      SELECT
        B.comappstat
      FROM
        mnt.workorders_copy B
      WHERE
        a.workordersoi    = b.workordersoi      -- THIS MUST BE THE KEY
        AND a.comappstat != b.comappstat
    )
  

  Speed is not so good that you run the query to sub for each row in mnt.workorders
  Note it is condition in where. You need other wise, you will update the unchanged to null values.

  I wouold do it like this:

  UPDATE
    (
      SELECT
        A.workordersoi
        ,A.comappstat
        ,B.comappstat           comappstat_OLD
  
      FROM
        mnt.workorders        A      -- THIS IS THE TABLE YOU WANT TO UPDATE
        ,mnt.workorders_copy  B      -- THIS IS THE TABLE WITH THE CORRECT (OLD) VALUES
  
      WHERE
        a.workordersoi    = b.workordersoi      -- THIS MUST BE THE KEY
        AND a.comappstat != b.comappstat
    ) C
  
  SET
    C.comappstat = comappstat_OLD
  ;
  

  This way you can test the subquery first and know exectly what will be updated.
  This was not a sub query that is executed for each line preformance should be better.

  Kind regards

  Peter

• How to create the table with the rows and columns using the layout?

  One of my friends advised me to put my site on the mode of provision as it is better than the standard as he said
  but I couldnot make an ordinary table with the rows and columns in mode available th
  y at - there someone who can tell me how to?
  Thank you very much

  Wednesday, April 18, 2007 21:01:38 + 0000 (UTC), "Mr.Ghost".
  wrote:

  > A friend of mine advised me to put my whole site on the mode of disposal as its
  > better than standard, as he says

  Your friend won't. Don't listen to him any more. Mode of disposal creates
  very fragile and rigid code pauses at the first opportunity.

  Gary

• Count (*) with the nested query

  Hello
  I have a question about the count (*) with the nested query.
  
  I have a table T1 with these columns:
  Number of C1
  Number of C2
  Number of C3
  Number of C4
  Number of C5
  
  (The type of each column is not relevant for example).
  
  This query:
  Select C1, C2, C3, C4
  from T1
  Group C1, C2
  
  It is not correct becausa C3 and C4 are the columns specified in the GROUP BY expression.
  
  If you run this query:
  Select count (*)
  (select C1, C2, C3, C4
  from T1
  Group C1, C2)
  
  I don't have an error message (properly, the result is the number of records).
  
  Why?
  
  Thank you.
  
  Best regards
  Luca

  because the optimizer rewrites as

  SELECT     COUNT(*)
                FROM   T1
            GROUP BY   C1, C2  
  

  G.

  Edited by: g. March 1, 2011 09:19

• Not how to show a part of online data in a table in another table with even no column?

  I need to display the data from certain rows in a table in another table with the same numbers of columns and main table must be disabled. Could someone advice how to do this?    Data in the table are from the microprocessor and is intended the user can see and edit only some data.

  If someone can show me some advice, it will be a great help.

  Kind regards

  Annemariehoeven

  Disable a table: SetInputMode (panelHandle, controlID, 0);  ('1' to re - activate).

  Hide a table: SetCtrlAttribute (panelHandle, controlID, ATTR_VISIBLE, 0); ('1' to show it again).

  These commands are valid for each type of control.

  To extract values from the table, you can just use GetTableCellVal or GetTableCellRangeVals: If the range of cells has the same data type, you can use the second command which is faster; If the cells are different (for example digital and channels) you must solve each of them individually. The use of the Clipboard doesn't have this limitation.

• How to write a query to return rows with the varchar column that contains even a single occurrence of the characters, such as Ÿ and

  How to write a query to return rows with the varchar column that contains even a single occurrence of the characters, such as Ÿ and

  I have a table whose columns with values such as

  MINNEAŸPOLIS and ¿VV ¿A

  Only the characters that are allowed in this column are alphabets, numbers, spaces, points and supports.

  Please help to write a SQL SELECT with Regexp_like query or any other option.

  Thanks to you all! Under query worked for me. Thank you Frank to explain the concept of hooks inside regexp_like.

  SELECT * FROM testspecial, WHERE REGEXP_LIKE (sampletext, "[^] ^ A - Z ^ a - z ^ 0-9 ^ [^.]") ^ {^} ^]') ;

• Importing data with impdp table with 3 new columns

  Hello

  Is it possible to import data with impdp in tables with 3 new columns?

  Kind regards

  William

  To do this, I use this method:

  Add the three columns in the source table and create the package:

  CREATE OR REPLACE PACKAGE DATAPUMP_TECH_COLS

  IS

  FUNCTION SET_DML_DATE (p1 in TIMESTAMP)

  BACK TO TIMESTAMP;

  FUNCTION SET_DML_TYPE (p2 in VARCHAR2)

  RETURN VARCHAR2;

  FUNCTION SET_DML_SCN (p3 in NUMBER)

  RETURN NUMBER;

  END DATAPUMP_TECH_COLS;

  /

  CREATE OR REPLACE PACKAGE BODY SYS. DATAPUMP_TECH_COLS

  IS

  FUNCTION SET_DML_DATE (p1 in TIMESTAMP)

  RETURNS THE TIMESTAMP

  IS

  BEGIN

  SYSDATE RETURN;

  END;

  FUNCTION SET_DML_TYPE (p2 in VARCHAR2)

  RETURN VARCHAR2

  IS

  BEGIN

  RETURN ' ';

  END;

  FUNCTION SET_DML_SCN (p3 in NUMBER)

  RETURN NUMBER

  IS

  BEGIN

  RETURN 0;

  END;

  END;

  /

  Export a table with remap_data

  expdp = TEMP_DIR PARALLEL = 8 TABLES directory is PIVOTMAT2. ACCTG_LINE LOGFILE = expdp_acctg.log = COMPRESSION STATISTICS ALL EXCLUDE =.

  DUMPFILE = ACCTG1.dmp, ACCTG2.dmp, ACCTG3.dmp, ACCTG4.dmp, ACCTG5.dmp, ACCTG6.dmp, ACCTG7.dmp, ACCTG8.dmp REUSE_DUMPFILES = YES.

  REMAP_DATA = PIVOTMAT2. ACCTG_LINE. DML_TYPE:SYS. DATAPUMP_TECH_COLS. SET_DML_TYPE.------

  REMAP_DATA = PIVOTMAT2. ACCTG_LINE. DML_DATE:SYS. DATAPUMP_TECH_COLS. SET_DML_DATE.------

  REMAP_DATA = PIVOTMAT2. ACCTG_LINE. DML_SCN:SYS. DATAPUMP_TECH_COLS. SET_DML_SCN

  Import table

  Impdp "" / as sysdba "" DIRECTORY = SRC_PIVOT TABLE_EXISTS_ACTION = TRONQUER REMAP_SCHEMA = PIVOTMAT2:STGPIV.

  DUMPFILE = ACCTG1.dmp, ACCTG2.dmp, ACCTG3.dmp, ACCTG4.dmp, ACCTG5.dmp, ACCTG6.dmp, ACCTG7.dmp, ACCTG8.dmp PARALLEL = 8

  to complete the removal of the collar if necessary.

• How the values to insert into the table with the command insertion

  Dear all
  can someone tell me how the values to insert into the table with the command insert, I want to say I always use command insert behind my forms on what shutter release button press the button of my save, but today I had a form of 6i, where controls (textbox, combo, etc.) are delineated with directly the table with I guess than the Properties Windows , I created 3 columns in tand 3 text on forms fields, now kindly tell me how to do this fields to fill and do not insert command, I mean directly defined with table column
  
  
  
  Please help me its urgent

  Hello

  If the block is based on your database table, just committed the shape, then changes will be applied to the database.

  François

• How to create a table with two unique columns

  How to create a table with two unique columns. I use the following syntax below and I get the error message such unique or primary key already exists.
  
  create the table COPQ_WORKCELL_GOAL
  (
  Type_id varchar2 (4) NOT NULL UNIQUE,
  Tyle_Location varchar2 (30) NOT NULL UNIQUE,
  Type_Description varchar2 (20).
  KEY elementary SCHOOL (Type_id)
  );

  Use 1 or the other column type_id;

  create table COPQ_WORKCELL_GOAL
  (
    Type_id varchar2(4),
    Tyle_Location varchar2(30) NOT NULL UNIQUE,
    Type_Description varchar2(20),
    PRIMARY KEY (Type_id)
  );
  
  Table created
  drop table COPQ_WORKCELL_GOAL;
  
  Table dropped
  create table COPQ_WORKCELL_GOAL
  (
    Type_id varchar2(4) primary key,
    Tyle_Location varchar2(30) NOT NULL UNIQUE,
    Type_Description varchar2(20)
  );
  
  Table created
  

• How to compare the length of the data to a staging table with the definition of the base table

  Hello
  I have two tables: staging of the table and the base table.
  I get flatfiles data in the staging of the table, depending on the structure of the requirement of staging of the table and the base table (length of each column in the staging table is 25% more data dump without errors) are different for ex: If we have the city long varchar 40 column in table staging there 25 in the base table. Once data are discharged into the intermediate table that I want to compare the actual length of the data for each column in the staging table with the database table definition (data_length for each column of all_tab_columns) and if no column is different length that I need to update the corresponding line in the intermediate table which also has an indicator called err_length.
  
  so for that I use the cursor c1 is select length (a.id), length (b.SID) of staging_table;
  c2 (name varchar2) cursor is select data_length all_tab_columns where table_name = 'BASE_TABLE' and column_name = name;
  But we get atonce data in the first query while the second slider, I need to get for each column and then compare with the first?
  Can someone tell me how to get the desired results?
  
  Thank you
  Manoi.

  Hey, Marco.

  Of course, you can set src.err_length in the USING clause (where you can reference all_tab_columns) and use this value in the SET clause.
  It is:

  MERGE INTO  staging_table   dst
  USING  (
         WITH     got_lengths     AS
                   (
            SELECT  MAX (CASE WHEN column_name = 'ENAME' THEN data_length END)     AS ename_len
            ,     MAX (CASE WHEN column_name = 'JOB'   THEN data_length END)     AS job_len
            FROM     all_tab_columns
            WHERE     owner          = 'SCOTT'
            AND     table_name     = 'EMP'
            )
       SELECT     s.ename
       ,     s.job
       ,     CASE WHEN LENGTH (s.ename) > l.ename_len THEN 'ENAME ' END     ||
            CASE WHEN LENGTH (s.job)   > l.job_len   THEN 'JOB '   END     AS err_length
       FROM     staging_table     s
       JOIN     got_lengths     l     ON     LENGTH (s.ename)     > l.ename_len
                           OR     LENGTH (s.job)          > l.job_len
       )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  As you can see, you have to hardcode the names of the columns common to several places. I swam () to simplify that, but I found an interesting (at least for me) alternative grouping function involving the STRAGG user_defined.
  As you can see, only the subquery USING is changed.

  MERGE INTO  staging_table   dst
  USING  (
         SELECT       s.ename
         ,       s.job
         ,       STRAGG (l.column_name)     AS err_length
         FROM       staging_table          s
         JOIN       all_tab_columns     l
        ON       l.data_length  < LENGTH ( CASE  l.column_name
                                            WHEN  'ENAME'
                                  THEN      ename
                                  WHEN  'JOB'
                                  THEN      job
                                     END
                             )
         WHERE     l.owner      = 'SCOTT'
         AND      l.table_name     = 'EMP'
         AND      l.data_type     = 'VARCHAR2'
         GROUP BY      s.ename
         ,           s.job
         )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  Instead of the user-defined STRAGG (that you can copy from AskTom), you can also use the undocumented, or from Oracle 11.2, WM_CONCAT LISTAGG built-in function.

• Insertion XMLAgg large output in a table with a CLOB column

  Hello
  
  I need to fill a CLOB column in a table with the output of a query select using XMLAgg which returns a string length exceeds the maximum length of the SQL 32767octets.
  
  The table I ask has 300,000 lines I need to create an XML file. When I apply the query below (without XMLAgg) I get 300 000 lines that each of the 134 characters each. However, when I add the XMLAgg I can't select the results as XMLAgg concatenates my 300,000 lines in a single line, where a length of string is too long for SQL.
  
  SELECT (XMLElement ("line", XMLELEMENT ('cell', XMLATTRIBUTES ('XML_TAG_1' "colName"), attribute1)
  XMLELEMENT ('cell', XMLATTRIBUTES ('XML_TAG_2' "colName"), attribut2)
  XMLELEMENT ('cell', XMLATTRIBUTES ('XML_TAG_3' "colName"), attribut3))
  )
  of XML_TAGS_TABLE
  -Produces 300,000 lines like below
  < row > < cell colName = "XML_TAG_1" > 12345 < / cell > < cell colName = "XML_TAG_2" > abcdef < / cell > < cell colName = "XML_TAG_3" > 123xyz < / cell > < / row >
  
  With this in mind, I created a temporary table (TEMP_TAB_TEST) with a column called XML_ROW that is a CLOB. Applying XMLAgg in the above query, I would get 300,000 lines concatenated into a string. I need to get the single string output in the XML_ROW (CLOB) column XMLAgg while I can then convert them to the XML file.
  
  I don't see how I can use XMLAgg due to the length of the output it produces? Is there a way I can fill the column clob using the XMLAgg is the result of a PL/SQL package / block Anon?
  
  Thank you very much
  Simon.

  It works for me:

  CREATE TABLE TESTCLOB (ID NUMBER, DATA CLOB);
  
  insert into testclob (
    id,
    data
  ) values (
    1,
    (SELECT XMLTYPE.getClobVal(XMLAGG( XMLElement("row", XMLELEMENT("cell", XMLATTRIBUTES('XML_TAG_1' COL1),attribute1)
                                      ,XMLELEMENT("cell", XMLATTRIBUTES('XML_TAG_2' COL2) ,attribute2)
                                      ,XMLELEMENT("cell", XMLATTRIBUTES('XML_TAG_3' COL3),attribute3))
                                     )
                               )
       from (SELECT 'XXXXX' attribute1, 'xxxxxx' attribute2, 'yyyyyyy' attribute3 from dual connect by level<1000000)
    )
  );
  
  SELECT ID, DBMS_LOB.GETLENGTH(DATA) FROM TEXTCLOB;
  
  ID                     DBMS_LOB.GETLENGTH(DATA)
  ---------------------- ------------------------
  1                      118999881                
  

• Difference between an XMLType table and one table with an XMLType column?

  Hi all
  
  Still trying to get my mind on all that XML stuff.
  
  Can someone explain briefly the difference between:

  create table this_is_xmltype_tab of xmltype;

  and

  create table this_is_tab_w_xmltpe_col(id number, document xmltype);

  What are the advantages and disadvantages of each solution? How are they really different?
  
  Thank you
  
  -Mark

  Sorry Mark, as far as I know it is not a real difference despite the fact that you can use the table with the column (ID), probably more effective for document-focused while driving the query via the ID column and anything else I can think off automatically about XMLType contra XMLType table columns is that (as far as I KNOW) you can not use a column of XMLType to shred the data into it via WebDAV o FTP. But then again I never really tried to do an XMLType column-based. Alternatives, for example, a binary XML column begins with a column of $ sys_nc_oid which is indexed, so in principle you shouldn't need an ID (number) column that has an index (a read also on http://www.liberidu.com/blog/?p=494). If there has been non-null that you could use this index for document oriented applications.