graph track color

Similar Questions

• How to change the plot point of the graph XY color programmatically fill?

  Hello everyone,

  I want to make a graph for my project. This graph in x axis date and there is the value. I made this graph XY.

  Now I want two conditions

  One is to draw the average value of the total value. Then traced the fill point color will change according to the average value. For example, my data values between 286 to 295 (any value present in the meantime) my average value is 290,6. So over 290,6 fills point color is GREEN and below the average value is RED. It is in fact I want. I did draw my data and also the average value. But I tried to change color, I couldn't. So please answer me someone. How can I do this task?

  Thanks in advance

  Joel M

  India

  I've attached real output and the power required

  All points of a field must have the same color.  What you can do is create a 3rd no line and red dots.  You can create a trace that contains all of the 'bad' XY pairs and intrigues.  Make sure that your parcel number is such that the red dots to draw on top of the green dots

• track color: line against points

  The color picker when you manually change the color of the field line gives you a toggle for the color line and point, which allows you to have a different color for the line and the data points.

  Looking for a way to do a program if it exists. Currently, I can only set the line color.

  Hi Bill,

  There are two properties for a field: ' point/fill color' and 'draw the color... "

• How can I change the color of ground on a type of dynamic data graphic waveform?

  I have several different plots on different graphics, and I want to set the colors different waveforms.

  To view the waveforms on different graphs, I went to the dynamic and then divided data type wire

  According to the number of channels I have.

  I can set the background color of the chart with a property node and create sliders of different colors without problem

  using the table of references that I created, so there's nothing wrong with my table of references or the property node.

  As soon as I try and a box of thread in the plot color > control color to draw, I get error 1055 on the property node.

  I was wondering if it was an error between keyboard and Chair, but now I think it's something more sinister.

  The error box appears and cannot be fired left the update until I run TASKKILL on LabVIEW and terminate.

  Any ideas on how to achieve my goal would be appreciated.

  (LabVIEW 8.6)

  My colleague has just acknowledged my problem and pointed me to the solution. It seems I need wiring in the value of "active conspiracy" of the loop each time and to ensure that this takes place before the update to track color.

  I have attached a picture of a labour code. I intend to combine the whole lot to the node of a property with the active plot at the top so that it executes first.

  Thank you for taking an interest Sheela

• Color XY gra [h using a gradient?

  Hello

  I searched on the Web site and forums a lot, but I could not find what I was looking for.

  I have a set of data that represents the thickness of a piece of metal, it is measured in many ways to make a data grid and I traced using a graph of intensity to show topographic information. I then added a XY chart next to it and added a cursor to the intensity curve. When you move the cursor, it displays the profile in this installment.

  I wonder if it is possible to color my XY graph of the intensity of the same way graph is colored? If I have a field for each region or is it possible to interpolate the colors on a xy chart?

  Joined a VI showing what I try to do, I did.

  Thank you!

  -Nick

  If you want the line color instead, you could do something as in this very old example.

  

• Maintaining color of conspiracy with the right data

  I have a vi written in 7.1 which has three tracks in a chart.  I have radio selector buttons so the user can enable or disable any channel.  The problem is the color of the track is automatically entered by the vi and chooses the color in function trace is turned on first, second and third.  Then, if the user disables all channels and then turns them on one at a time, from top to bottom, they are correct, then green, blue and red.  But if they turn on their bottom first, then the traces of the first and third don't follow the track color legend.  Basically, I want to know how to lock a track to a given channel color.

  Kind regards

  Ron

  
  

• Find colors

  I'm trying to create a script to find and replace the fill colors. The pseudo code would look like this:

  CMYK_value_1 the selected track color value

  Select all the paths the fill color is CMYK_value_1

  set the color of foreground to CMYK_value 2

  So far, I tried this with Applescript, but without success. It turns out that the color that the script gets in illustrator in the first line does not match the actual colors in the document. A rounding error or whatever happens. Is there a way to get around this?

  I have a little bit of searching around online and couldn't see all the scripts that even remotely to do something like that, makes me suspect it is a fundamental problem with the way the color information is transmitted between Illustrator and any scripting environment.

  Here you go... it should work for what you need...

  var color = app.activeDocument.selection [0] .fillColor;

  var OBJS = new Array();

  for (j = app.activeDocument.pageItems.length - 1; j > = 0; j-) {}

  If (CompareColors (app.activeDocument.pageItems [j] .fillColor, color)) {}

  OBJS.push (App.activeDocument.pageItems [j]);

  }

  }

  function CompareColors (c1, c2) {}

  If (c1.typename! = c2.typename) return false;
  {Switch (C1. TypeName)}
  case "CMYKColor":
  If (c1.cyan == c2.cyan & c1.magenta == c2.magenta & c1.yellow == c2.yellow & c1.black == c2.black) {}
  Returns true;
  }
  break;
  case "GrayColor":
  If (C1. Gray is C2. Gray) return true;
  break;
  case 'LabColor ':
  If (c1.a = c2.a & c1.b == c2.b & c1.l == c2.l) {}
  Returns true;
  }
  break;
  case "RGB":
  If (c1.red == c2.red & c1.green == c2.green & c1.blue == c2.blue) {}
  Returns true;
  }
  break;
  case "SpotColor":
  CompareColors (c1.spot.color, c2.spot.color);
  break;
  by default:
  Returns false;
  }
  }
  if(App.activeDocument.DocumentColorSpace == DocumentColorSpace.CMYK) {}
  var prompt = DLG ("what your new color?") ("He entry as delimited by commas (for example: 10,20,40,100) ', '0,0,0,0", 'New color?');
  clrs = var (dlg! = null)? DLG. Split(","): [];
  If (clrs. Length == 4) {}
  var myCMYK = new CMYKColor();
  myCMYK.cyan SRTC = [0];
  myCMYK.magenta SRTC = [1];
  myCMYK.yellow SRTC = [2];
  myCMYK.black SRTC = [3];
         
  for (I = objs.length - 1; i > = 0; i--) {}
  OBJS [i] .fillColor = myCMYK;
  }
  } else {}
  Alert ("invalid data passed!");
  }
  } else {}
  var prompt = DLG ("what your new color?") ("He entry as delimited by commas (for example: 10,20,40) ', '0,0,0', 'New color?');
  clrs = var (dlg! = null)? DLG. Split(","): [];
  If (clrs. Length == 3) {}
  var myRGB = new RGBColor();
  myRGB.red SRTC = [0];
  myRGB.green SRTC = [1];
  myRGB.blue SRTC = [2];
                 
  for (I = objs.length - 1; i > = 0; i--) {}
  OBJS [i] .fillColor = myRGB;
  }
  } else {}
  Alert ("invalid data passed!");
  }
  }

  It can be useful;

  see you soon;

• How to reset the graphics path properties

  Hello

  When a Labview graph is populated by the data for the first time, the plot attributes (color, style of line,...) are generated automatically by Labview.

  Imagine that the user changes the way the plot resembles his own taste. Let's say the plot 0 was blue and it's Green.

  Now it loads a new set of data in the graph, the color of the field 0 is always green.

  I wish that Labview to reassign some random colors for the plots as he did when given here where it is loaded in the chart for the first time.

  How can I do?

  Best regards

  Like any other control in LabVIEW, the properties that you manually change to stick around. Now, you can have your land constitute up to be the default colors and attributes, and it will load this way whenever the VI loads. If you pull the initial attributes when the first load of your VI, you can then use these reset all programmatically when you want.

• How to make Custom Bitmap ButtonField background transparent and not black?

  I have a buttonfield bitmaps customized using a png with transparent rounded corners. It appears as a black rectangle with the image on it. How can I make transparent blackground? I think that my problem lies in this code and I tried to use "alpha" with no results:

  Protected Sub paintBackground (Graphics Graphics) {}

  try {}
  graph.setGlobalAlpha (0);
  graph.setBackgroundColor (Color.BLACK);
  Graph.Clear ();
  }
  Finally {}
  }

  I'm sure it's a simple answer, but thanks anyway for the help!

  So I tried to do the same thing to paint override, and now the buttons are not displayed at all the haha. In any case, another programmer has helped me too and came up with the following code, it works and the problem is resolved. Thanks for your help guys, I'll put 'likes' for you. If anyone needs the code here, this is:

  SerializableAttribute public class BitmapButtonField extends {field}
  _onPicture private bitmap;
  _offPicture private bitmap;
  private int id;

  public BitmapButtonField (Bitmap onImage, Bitmap offImage) {}
  Super(Field.FOCUSABLE |) Field.FIELD_HCENTER);
  _offPicture = offImage;
  _onPicture = onImage;
  }

  {public setButtonImage Sub (onImage, offImage Bitmap Bitmap)
  _offPicture = offImage;
  _onPicture = onImage;
  }

  {} public void setButtonId (int id)
  This.ID = id;
  }

  public int getButtonId() {}
  return this.id;
  }

  public int getPreferredHeight() {}
  Return _onPicture.getHeight ();
  }

  public int getPreferredWidth() {}
  Return _onPicture.getWidth ();
  }

  protected void drawFocus (Graphics g, boolean on) {}
  }

  Protected Sub layout (int width, int height) {}
  setExtent (Math.min (width, getPreferredWidth()),
  Math.min (height, getPreferredHeight()));
  }

  Protected Sub paint (Graphics Graphics) {}
  graph.drawBitmap (0, 0, getWidth(), getHeight(), isFocus()? _onPicture: _offPicture, 0, 0);
  }

  protected boolean navigationClick (int status, int time) {}
  fieldChangeNotify (0);
  Returns true;
  }

  {} public boolean keyChar (key char, int status, int time)
  If (key == Characters.ENTER) {}
  fieldChangeNotify (0);
  Returns true;
  }
  Returns false;
  }
  }

• integer to another class problem, please help :D

  I tried a day now to solve this problem and I'm stumped. Could someone please point out what's wrong with the following code? I'm moving an integer of a class to another.

  ButtonField nextBut = new ButtonField ("Next", Field.FIELD_HCENTER) {}
  protected boolean trackwheelClick (int status, int time) {}
  If (firstChoice == 0) {}
  Dialog.Alert ("you must choose!");
  }
  else {}
  int firstChoices = firstChoice;
  UiApplication.getUiApplication () .popScreen (Ui.getUiEngine () .getActiveScreen ());
  UiApplication.getUiApplication () .pushScreen (new newGame3 (firstChoices));
                     
  }
  Returns true;        }
  public int getPreferredWidth() {}
  Return Display.getWidth ();
  }
  Protected Sub paint (Graphics Graphics) {}
  graph.setBackgroundColor (Color.BLUE);
  graph.fillRect (0, 0, getWidth(), getHeight());
  graph.setColor (Color.RED);
  Graph.Clear ();
  Super.Paint (Graph);
  }
  };
         
  nextBut.setFont (Font.getDefault () .derive (Font.BOLD));
         
  FieldChangeListener lnextBut = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  }
  }
  ;
  nextBut.setChangeListener (lnextBut);
  VMAN. Add (nextBut);

  the other class

  public class newGame3 extends form {}
     
  public newGame3 (int firstChoices) {}
  LabelField t1 = new LabelField ("new game 3" + firstChoices);
  Add (T1);
  }
  }

  I think Rexdoug meant firstChoice.

  Give a look at this example. You should get whats wrong on your code.

  public class TestScreen extends MainScreen
  {
      int firstChoice = 5;
      public TestScreen()
      {
          ButtonField nextBut = new ButtonField(" Next ", Field.FIELD_HCENTER | ButtonField.CONSUME_CLICK);
          FieldChangeListener lnextBut = new FieldChangeListener()
          {
              public void fieldChanged(Field field, int context)
              {
                  UiApplication.getUiApplication().popScreen(Ui.getUiEngine().getActiveScreen());
                  UiApplication.getUiApplication().pushScreen(new NewGame3(firstChoice));
              }
          };
          nextBut.setChangeListener(lnextBut);
          this.add(nextBut);
      }
  } 
  
  class NewGame3 extends MainScreen
      {
          public NewGame3(int firstChoice)
          {
              LabelField t1 = new LabelField(" New Game 3 "+ firstChoice);
              this.add(t1);
          }
      }
  

  Concerning

  Bika

• Button screen bitmap PopUp do not use opaque background

  I have a custom button png I created, it includes an opaque background. I use this button anywhere in my app and it works perfectly in the normal screens. However when I put them in the custom context menu screens, the opaque turns into a white color. I need to solve this problem. Please tell me any code you must see. Thank you!!

  I think the problem might be in the substantive Manager, it's here for a normal screen:

  this.getMainManager (.setBackground)
  BackgroundFactory.createBitmapBackground (Bitmap.getBitmapResource ("background1.png")));

  This is for a pop-up screen:

  () this.setBackground
  BackgroundFactory.createBitmapBackground (Bitmap.getBitmapResource ("backgroundProfile.png")));

  For the pop-up screen, I can't use getMainManager(), and when I try to use getManager() gives me a nullPointer exception.

  Please help, thanks

  I mentined about that I wasn't convinced thuis was your problem, the important thing that I told you about PopupScreen was how to find the NManager.

  That said, some of your code LabelField seems wrong:

  Protected Sub paint (Graphics Graphics) {}
  graph.fillRect (0, 0, getWidth(), getHeight());
  graph.setColor (Color.RED);
  Super.Paint (Graph);
  }

  You have not set a color for the first fillRect, so it will be whatever color the LabelField normally use, who is black.  So I think you're just lucky that your code works.

  In the LabelField PopupScreen you added

  graph.setBackgroundColor (Color.BLACK);

  This in fact has no effect on the fileRect, but is effective the next graph.clear (), and then it will take your Bkacground color.

  I would recommend that you change these two areas to do the following, which I think will give you black backgrounds and red text in both cases:

  LabelField t1 = new LabelField ("Example")
  {

  Protected Sub paintBackground (Graphics Graphics) {}

  try {}
  graph.setBackgroundColor (Color.BLACK);

  Graph.Clear ();

  }
  Protected Sub paint (Graphics Graphics) {}
  graph.setColor (Color.RED);
  Super.Paint (Graph);
  }
  };

  If you make this change and corrects LabelField, perhaps a similar change will fix your buttons?

  In fact, to make sure that your code has no effect in Sweden, I would like to change your code as follows:

  LabelField t1 = new LabelField ("Example")
  {

  Protected Sub paint background (Graphics Graphics) {}

  int currCol = graph.getBackgroundColor ();

  try {}
  graph.setBackgroundColor (Color.BLACK);

  Graph.Clear ();

  } {Finally

  graph.setBackgroundColor (currCol);

  }

  }
  Protected Sub paint (Graphics Graphics) {}

  int currCol = graph.getColor ();

  try {}
  graph.setColor (Color.RED);
  Super.Paint (Graph);

  } {Finally

  graph.setColor (currCol);

  }
  }
  };

• Graphics customization OBIEE

  Hello Hello!

  
  I tried to change my graphic's default colors in OBIEE style, but I could not run.
  Does anyone have an idea what is happening?

  
  Thank you.

  Hello

  Watch this

  https://shivabizint.WordPress.com/2011/04/17/setting-default-graph-series-colors-in-OBIEE-11g/

  We have a lot of discussions about this on the forum of the RTO

  Felipe Idalgo

• "Clips selected razor" cut all clips

  I have a Multi-track project and when I select "razor selected clips" ALL clips for editing. I double checked that I don't have a single track selected and I use mode ' clips ' the razor tool. Selected track color becomes brighter when selected, and the razor tool icon shows a unique Blade (instead of two smaller blades). What could I hurt to cause all the clips to selected account?

  I'm sure that this is most relevant for you, but for someone else who might be reading this thread, press "r" again. The 'r' key switches between the razor tool modes. You'll notice that in a way, there are two razors and blue line runs through all tracks; in the other mode, there is a razor and the blue line only through a single track. Here's how to know which mode you are. I hope this helps someone in the future.

• Percentage predefined a progress bar

  I want to use a progress bar to indicate the current progress of tasks in our project. How can I set the bar during execution. Ex; all 50%, 2% full, 100% full.
  
  Thanks for the help

  jlopes151,

  You need to set the 'manual' mode progress bar and then you can use the setProgress() method to set the % complete.

  For an example, see rol http://blog.flexexamples.com/2008/02/08/setting-the-track-color-of-a-flex-progressbar-cont / or control http://blog.flexexamples.com/2008/02/09/using-an-embedded-font-with-the-flex-progressbar-c /.

  Hope that helps,
  Peter

• keep the same color of track of a multiple XY graph

  Hello world

  I want to draw the last 5 plots on the same XY graph with different colors. For this I use a shift register. Using registers at offset makes the colors of the plot change.

  ex:

  Imagine that I chose the parcel 1 to be red, parcel 2 orange and 3 yellow plot (graph XY properties)

  When I start the VI is what happpens

  First parcel of iteration: Red

  ----------

  Second plot of iteration: Red

  First parcel of iteration: orange

  ----------

  third parcel of iteration: Red

  Second plot of iteration: orange

  First parcel of iteration: yellow

  The shift register makes the landslide down making the new plot always in red.

  What happens if I want the plot to keep the same color, even if they are shifded? (first iteration plot always in the red and the second in orange...)

  Thanks in advance,

  F

  Then initialize an array of 5 parcels.  Subset of table replace to replace each parcel in order.