Graphic error 4.2 APEX

Similar Questions

• DV7-1210eo Black Screen with CPU and graphic Error Codes

  I'm running out of ideas on how repair this laptop so I thought I would ask here. Like so many other people with these portable mine seemed to go right after my warranty expires. I went to power on one day and he presented that a directed graph code error with a black screen. Instead of trying to fix the original slide myself I thought it would be best to just replace it. After the new Board of Directors came and I reassembled it all has been great to work for a few days. I went to power on one morning and he presented the same graphics code error as before. I then reset and tried again, but this time that he gave me the CPU error instead, after 15 seconds or later he would begin to switch between error a CPU and graphics. I assumed that the jury who sent was defective, so I sent a replacement. Once the replacement card has been installed it would always give me the same errors, sometimes it would be the graphics and other CPU.

  I was told the jury that I sent worked great and replacement has been tested before it was sent, it even came with the results of the tests to check. I tried to replace the CPU and memory with a work known and same notebook AC adapter, which does not seem to help.

  If anyone has any idea as to what could be the problem I would be acknowledging the entry.

  Thank you

  I want to just update to anyone who seems to have the same problems as me.

  I finally had time to replace the CPU and specifications works fine now. It seems the controller memory on the old CPU came out and was causing memory to not be detected properly and causing graphic errors. Before you spend money on a new motherboard, you may want to consider the processor as the problem.

  Now if only I can figure out how to keep it from cooking itself...

  Thanks for all the help,

  Domo

• Graphical error in photoshop cc 2015 with the help of the Selection tool

  Hello

  for about 2 days, I have a problem with photoshop. As you can see on the capture screen there is something like a graphic error and I could not find any solution for this problem yet.

  I hope someone can help me with this.

  Thanks in advance.

  

  This is a known bug that will be fixed in the next update, which should be out soon. At present, turn off your GPU in preferences or press 'Q' twice to take you to the Quick Mask mode.

• Graphic error 'no graphics appropriate' when playing games

  Why "no suitable graphics" don't pop up would be when using microsoft games? Worked well yesterday

  Hi Steamy4000,

  • You receive this error message when you play integrated windows?
  • Check if there is no yellow bang or error message or listed in next to the Graphics Device Manager error code. To check follow the steps below:

  i. Click Start

  II. in the search box, type in devmgmt.msc

  III. develop the graphics card and double-click the sub element

  With regard to:

  Samhrutha G S - Microsoft technical support.

• The mouse graphic error, impossible to get rid of him, until I restart. Loading screen error, video included.

  OK, so here is the thing. I'm a gamer, I play Everquest right now and Im having problems with my computer 'new '. It was bought used, but when we test tried at home to the owner initial, everything worked perfectly. Since then, my husband has reformatted and put on Windows Vista Buisness on it. After a post on the game forums, Kevin helped me to get the PC to stop locking up. Yet, I still have the other problem with the mouse pointer.

  First thing first: computer information!
  Edition of Windows: Windows Vista Business Service Pack 2
  System:
  -Processor: AMD Athlon (TM) 64 X 2 Dual Core Processor 5000 + 2.61 GHz
  -RAM memory (RAM) 3.00 GB
  -System type: 32-bit operating system
  Graphics card: Radeon HD 4850
  Motherboard: nForce 590 SLI

  Next: I am 100% positive that there is no update pending for the operating system. There are things in option that I can install it, but they are not relevant to the problem that I currently have.

  So here's the question:

  (1) for the loading of Windows Vista Business. I see the text channel 0 Slave and in the lower right of my two monitors, both monitors so it is important, there is a rectangle that is 1/2 at the bottom of the screen.
  I included a video of him: [URL = http://tinypic.com/r/jhae14/5] View My video [url]
  (2) sometimes when the games, I see a square box that resembles film developed that appears randomly on the screen.
  Note: I only see the error all in game, because when the PC is on that's what I do. Here is the screenshot [IMG] [line] http://i44.tinypic.com/2evqekg.jpg
  (3) I have experience this behavior in and out of the game, but the screenshots in EQ are easier and faster to make and Vista does not see the problematic mouse pointer when you take a screenshot of it. Sometimes I will be able to tab in and out of what I do and it will go away, othertimes it requires a complete closed system and then it will go away. Here is the screenshot: [IMG] [line] http://i43.tinypic.com/qqswtx.jpg With the image that I just linked, there are three examples of the problem. The upper left corner has the double serrated edge, the other two posted on a character's head to make it easier to see. (Not sure if the 2nd link works or not. List of URL to Tinypic to show errors: http://tinypic.com/r/qqswtx/5)

  These problems don't always cause me down, but there are moments where I feel this graphic glitch, so the computer has locked up. It's incredibly less frequent that another EQ crashing the computer problem, I had. He posted the question here, happens once or twice every two days, when it isn't something I can deal. In the 2nd picture the edge serrated turning into that, you can always click in the right place. One would think that you would use just the tip to click on something, but sometimes this does not work and must continue to go upward or downward a bit to get to what you were tryin to close / open / whatever.

  Thank you for your time!

  Hello Dewifey,

  Thank you for posting.  I checked the other thread just so that I would have a complete understanding of the problem.  I studied him this strongly and I came up with some possible solutions for you.  As seems to be more than a gliche graph, I will propose common fixes first.  The first is to check the site ati.amd.com for updated for your video card drivers.  The second is to check for updates or patches for the game Everquest game.  Now we can get right to my search results.

  The only problem with EQ is really changes to security of XP to Vista.  EQ always assumes that users will run as administrator with full access to all under the directory %ProgramFiles%.  In Vista, even if logged in as an administrator, you don't actually run as administrator.  You must explicitly elevate your rights before becoming administrator (such as right click, run as administrator, or configure the program to run as administrator).  Just put the game to run in compatibility mode for Windows XP Service Pack 2 and run in administrator mode.
  If you forget to do this, the patch cannot connect records and will be silently _ it's short films before leaving.

  This step applies only if you run the game in windowed mode.

  One way to expedite EQ in Vista is to click right on eqgame.exe and on one of the tabs that you can disable "desktop composition" that disables the interface Aero and stop the GUI running on your video card.

  Please let me know if this helps you.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• WOW/graphics error "display driver nvlddmkm stopped responding and was retrieved successfully."

  Help, please. On the next computer I have terrible crash problems while playing WoW. Critical error WOW States: "not enough memory to process command - 11 538 bytes requested."

  When running 3D Mark Vantage I can reproduce the "display driver nvlddmkm stopped responding and was recovered successfully.

  Processor Intel Core i7 CPU 920 @ 2.67GHz
  Details of the component
  NVIDIA GeForce GTX 295 graphics
  4 095 MB total graphics memory available graphic set
  Main hard drive 53GB free (140 GB Total)
  64 bit version with service PAC 2 Vista Ultamate

  Forums are full of posters indicating that it is a Vista / Nvidea incompatibility problem that has been around for years and that the problem is not treated. I tried everything I can think of, check the RAM to download new drivers, to the removal of unnecessary records of WOW. I reinstalled everything, run each diagnostic tool in the plane, patches downloaded, checked for the virus and still no help.

  I am currently able to play WOW on the smaller graphics settings and avoid cities. With this level of equipment, it's a shame, really, I should be able to do more.

  Did anyone have any suggestions of what I can do at this point?

  OK, I did a lot of research on this issue.  The problem lies in the Blizzard, most of the time.

  World of Warcraft is a set of 32 bits.  Because it is strictly 32 bit, it only has access to 2 gigabytes of memory.  Windows manages the other 2 giga of addressable space.

  Most of the developers of games flag their games before the compile time to use larger amounts of memory.  Blizzard doesn't do this, because their anti-cheat system and third-party tools rely on the 32-bit addressing and address 64-bit would mean that they must all be rewritten.

  What happens in the game, is that your footprint large capacity memory card is mapped in the game.  In general, it is when your settings are high, because it uses the most memory, which explains why the game is playable when you use minimal settings.  Given that the configuration of your particular graphics card uses close to 2 gig of RAM itself, quickly force you the game short of memory addressable space.

  To resolve this problem, you may be able to play with reduced settings.  Reduce your resolution is usually the best way to limit the use of memory, since it increases exponential use RAM when you increase the resolution.  You might have to play with different parameters.  You can open the upward Task Manager and monitor the use of your memory WoW game to see where the sweet spot is maintaining your memory under control.

  Blizzard will have to make the difficult choice to eventually allow access extended memory.  More people are buying equipment like yours, this problem will be more widespread.

• new javax.microedition.lcdui.Graphics () error (not public are accessible)

  Hey. Just do some drawing and had a compilation error

  Graphics is not public in javax.microedition.lcdui.Graphics; are not accessible from the outer packaging

  javax.microedition.lcdui.Graphics gr = new javax.microedition.lcdui.Graphics ();   //

  gr.drawRect (100,50,200,100);

  In the online JDE 4.7 QAnywhere, the class is public not private. There's no docs for the Builder. I have tried providing an arg but no dice. I use this class of lcdui because other graphics can't shoot a picture object.

  Ideas appreciated, has soon

  J

  Hey-learned that the only way to get an instance of the javax.microedition.lcdui.Graphics object is to use

  myGraphics = javax.microedition.lcdui.Image.getGraphics)

  So that's it.

  JD

• Error on the Apex 5.0.1 installation process. Oracle 11.2.0.1.0 Linux 64-bit

  Hello! I install Apex 5.0.1 on my Oracle DB 11.2.0.1.0 64-bit Linux OS, following the: Application Express installation and configure Embedded PL/SQL Gateway but there is a problem when I try to run the @apex_epg_config.sql. I would be grateful if someone can help me

  SQL> @apex_epg_config.sql /home/oracle
  
  PL/SQL procedure successfully completed.
  PL/SQL procedure successfully completed.
  PL/SQL procedure successfully completed.
  PL/SQL procedure successfully completed.
  
  . Loading images directory: /home/oracle/apex/images
  Directory created.
  
  declare
  *
  ERROR at line 1:
  ORA-29903: error in executing ODCIIndexFetch() routine
  ORA-31001: Invalid resource handle or path name ""
  ORA-06512: at line 39
  
  begin
  *
  ERROR at line 1:
  ORA-29903: error in executing ODCIIndexFetch() routine
  ORA-31001: Invalid resource handle or path name ""
  ORA-06512: at line 2
  
  declare
  *
  ERROR at line 1:
  ORA-29903: error in executing ODCIIndexFetch() routine
  ORA-31001: Invalid resource handle or path name ""
  ORA-06512: at line 6
  ORA-06512: at line 57
  
  Commit complete.
  
  Directory dropped.
  
  timing for: Load Images
  Elapsed: 00:00:00.13
  PL/SQL procedure successfully completed.
  Commit complete.
  
  SQL> 
  

  Hello!

  The s/n of my company's it. There was an error on the configuration of the ACL. He made the resettlement of the installation of all the ACLs and Apex worked right.

  Thak you all!

• Clear cache page after deletion to avoid errors ora-1403 Apex 5.01

  Hi all

  Always 'new' at Apex!

  I'm getting ORA-01403: no data available error after deleting a line in a 5.01 Apex form created from the interactive report + model form.

  After searching the forum, I found a direct reference to this situation:

  ORA-01403: no data available on the deletion of a record

  --------------------------------------------------------------------------------

  Denes Kubicek December 9, 2014 01:40 (in response to 2805872)

  After deleting a record, you must clear the page cache. If you do not have the primary key item session state can keep the old value of the deleted record. The page loading process will try to retrieve this value from the table and meet no data found.

  ---------------------------------------------------------------------------------

  Unfortunately, I do not know where or how to " " " clear the cache of the page ' after deleting a record.

  I saw the reverence to APEX_UTIL. CLEAR_PAGE_CACHE but I don't know where to use

  Others say still set the value of the key null column.

  The documentation of the Apex is said to use the URL:

  2.9.3.2.2 example: clear cache on a Page and passing an element value

  This example shows how to implement a form of update. It erases the existing information and sets the value of the element (usually a primary key).

  f?p=6000:6003:&APP_SESSION.::NO:6003:MY_ITEM:1234 

  This example:

  • Runs the application 6003 6000 page and uses the ID of the current session
  • Specifies to not show debug information ( NO )
  • Clears all values maintained by the current session for the items on page 6003 cache
  • Sets the State of an element called session MY_ITEM value1234

  But I do not know where or how to do that in the context of the key Suppr.

  Can someone point me in the right direction? I'm learning the Apex using as many integrates native as possible features.

  If clearing the cache of the page, that's what needs to be done after the removal of a line, would not these features have been integrated to the Delete key?

  Thank you

  Mason

  OK, after wandering in the desert for a while, I tried this approach to clear the cache once you press the button Delete and it doesn't seem to work.

  I created a new process called "Clear the cache" after the process of "line process of...» »

  The process to clear the cache was of type PL/SQL Code with the section of Code PL/SQL, the value 'APEX_UTIL. CLEAR_PAGE_CACHE (2); »

  I don't know if it's a good way to do this, or if the accepted practices, or what side effects will rain down on me that they are, but at least I got a result that has solved my immediate problem.

  So nice to click on delete and not greeted with an ORA-01403 error!

  Thanks to everyone who helped me in on it!

  Mason

• Error during the apex 5.0 is installed

  Hello to everyone

  I get an error when I install APEX 5.0

  REQUEST 4411 - Oracle APEX System Messages and Native Types

  application/delete_application

  Start

  *

  ERROR on line 1:

  ORA-04098: trigger "APEX_050000.WWV_FLOW_SESSIONS_T2" is not valid and does not

  revalidation

  ORA-06512: at "APEX_050000.WWV_FLOW_SESSION", line 946

  ORA-06512: at "APEX_050000.WWV_FLOW_API", line 2154

  ORA-06512: at line 2

  Disconnected from the database to Oracle 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production

  I Don t know what happened?

  I solved this problen falls (waterfall)

  users

  APEX_050000

  FLOWS_FILES

  roles

  APEX_ADMINISTRATOR_ROLE

  APEX_GRANTS_FOR_NEW_USERS_ROLE

  And finally install again.

• Error in 5 APEX with scope of column

  Hello

  I test my application with the new apex.oracle.com environment and an old page that normally work in 4.2.6 has this error. I don't understand!

  
  

  Tag of the Page element MY_ITEM cannot be made that the label span setting column grid for this element of the page is not valid. It is set to be displayed with a scope of column label of 3. It is not supported, because the page itself has only 3 columns available.

  
  

  

  Hello

  the final docs have not yet been published. But I don't think you can find more information, because this layout behavior is specific theme. I can try to provide additional information.

  "Optional - top" shows the label above the page item, that's why it will NOT consume any horizontal space next to the page. This is also the reason why "Scope of the column label" is not exposed to this label template.

  'Optional' displays the label before the page element. That's why you need to consume to the horizontal space. As several labels can have a different width, it should be noted the space the longest label will consume. If we don't do that, it would be not possible to align the page under the other items. By default, a label will consume 3 columns of the grid (this default value is set in the Page template). The default value can be changed by setting "Scope of the column label" for your page element.

  The error arose because your shipment of page itself had only 3 columns of the grid for rendering. The label for this element of the page tried to occupy 3 columns of the grid of your 3 columns available. An error has been raised, because the field itself also needs space for rendering, but no column of the grid was left.

  Concerning

  Patrick

• Error after migrating APEX app to a different database instance

  Oracle EE 11 GR 2

  APEX 4.2.x

  ------------------------

  After the migration of an APEX application and underlying database objects into a new database, I get the following error (blackened my name of component specific to the application and the id for security reasons):

  

  In APEX, this error occurs when you try to run the application after logging in the workspace of the application.

  A specific to APEX table might be damaged or not migrated as it should have?  No tables starting with APEX were imported.

  No, these can be customized (self defined) so it's to the application developer.

  If you go to the request of the manufacturer and open the application and go to "shared components", then the "authorisation schemes' and open the schema with the name mentioned in your error message (behind" component name: ') you should see the authorization code that fails somehow. Search for the tables and the data mentioned in this piece of code.

• Error: error - not found (Apex 4.2)

  Hello

  I get this weird error trying to add lines in the tabular presentation manual using collections.

  After you have added the first line, the error will come out when I tried to hit the button "Add" again.

  

  It comes from the DA for the Add"" button.

  

  It's the application process on: Add_Status_Row

  

  Help, please.

  Thank you.

  Hello

  Yes, you can "reuse" tables f01 - f20 when transmitting data on process request using apex.server.process.

  But for the elements of the page, keep the current name. Especially if you have a process that works with the data in the tables on submit.

  Kind regards

  Jari

• Graphics error after latest update

  Windows 8.1 970 GTX graphics card. I get an error message:

  "Illustrator has detected an error with your material or graphics processing software and went to the preview of the CPU."

  After the most recent Illustrator happned updated 18/07/15

  has worked well before.

  so boring.

  Hello

  I'm the technical team of the Illustrator.

  Starting 19.0.1 we implemented a back drop in CPU errors of OpenGL. There are various reasons why an OpenGL errors may arise from issues implemented in Illustrator, bug in the drivers, the lack of memory in the GPU to render the content, an error of computation on the GPU or even a bug in the OS etc...

  The reason why we have implemented a back fall with 19.0.1 is to prevent undesirable rendering problems when these errors occur. Please click on does not show them the check box and continue to work on Illustrator. Illustrator turn off automatically the GPU acceleration momentarily when it detects an error. This momentary exit ramp is applicable only for the current session. The next time you start Illustrator, we will try to reuse the GPU.

  With Apple and Microsoft we also work with different hardware vendors such as NVIDIA, AMD, and Intel is to get these issues resolved or to implement workaround in our own product.

  If you get a fallback error please let us know of your file by email at [email protected] . Please reference this thread in your communication. Get us this investigation and see how these situations can be handled better.

  Thank you.

  Kind regards

  Ashutosh chikh

• Error ORA-01422 apex: exact fetch returns more than the required number of line

  Hi people,
  
  Apex 4.1
  I have a page that works like a charm.
  
  Based on my application I need I have to perform the same operation for the different regions. As a quick and better method, I copied the page and branched, it inspires tab for this region.
  
  The problem is that the original page works fine.
  I haven't changed anything except the parent set to this copied page tab and works that I find with the above error.
  
  It allows me to make the first entry on this page, but when I try to access the page again it gives me this error.
  
  The error in detail is as below:
  
  is_internal_error: false
  ora_sqlcode:-1422
  ora_sqlerrm: ORA-01422: exact fetch returns more than number of lines
  Component.type: APEX_APPLICATION_PAGE_PROCESS
  Component.ID: 214936714355373108
  Component.Name: EMP_LEAVE_INFO line
  error_backtrace:
  ORA-06512: at line 1
  ORA-06512: at "SYS." DBMS_SYS_SQL", line 1926
  ORA-06512: at "SYS." WWV_DBMS_SQL', line 973
  ORA-06512: at "SYS." WWV_DBMS_SQL', line 999
  ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 806
  ORA-06512: at "APEX_040200.WWV_FLOW_DML", line 336
  ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 332

  >
  As a quick and better method, I copied the page and branched, it inspires tab for this region.
  >

  Copy paste is never advisable. It can be fast in some cases, there is an anti-pattern.

  Be aware that the automatic extraction of the APEX line is based on a component of demand.

  It is possible that your automatic rowfetch is based on the element of your previous page. If you for example to change the name of the table, but do not change the reference is the primary key value, then you can pass a value to your table that was not unique. This would result in ORA-01422.

  Find the value of the session element and run your query.

  Concerning

  Nico