Graphics and Date axis

Similar Questions

• Interactive report - bad graphic value data axis

  Hello
  
  We have created an interactive report based on the demo_orders table.
  The interactive chart displays incorrect data on the y-axis (4,00000 instead of 4 000,00)!
  Values in the table are ok, even the value displayed when the user clicks about data specific is correct.
  
  Anyone had similar problems?
  
  Request Express 3.2.0.00.27
  AnyChart #5.1.3
  
  
  Thank you.
  
  Kind regards
  Kristjan

  Hi Kristjan,

  I am able to reproduce the issue you report, using a report interactive optional APEX 3.2.1 and 4.0, where the language of the application is a non-English. So for example, if my English is * 10 000,00 graphic label * and when I pass the main language of the Application in German, so the values displayed should be * 10,000.00 * however it is incorrectly appearing as * 10 000 *. When you run in some non-English languages, used NLS decimal separator is a comma ",", but it is not properly applied to interactive report table. The problem is that the decimal separator parameter in the XML table is not correctly be escaped and is ignored. I have connected the bug 10154666 to follow this issue and a fix for this will be available in our next release. Thanks for that bring to our attention. At the same time, while ensuring that the values in your chart are displayed accurately, it might be better to create a region of separate table on the page in question, rather than using interactive report table.

  Kind regards
  Hilary

• How do I change the format of data o1 - axis and y1 - axis of an areaGraph

  Hello

  I want to change the format of o1 - axis data and y1 - axis of my AreaGraph. The sample output of the y1 - axis data format should be like (ex.105b should be 105,000) and o1 - axis data format should be like (ex. month - new year line). Is it possible to change these values, I need? Here is the image of the chart.

  

  Here is an example of photo output required to o1 - axis:

  

  Here is the code in the jsff page:

  < dvt:areaGraph id = "Chart1" subtype = "AREA_VERT_ABS".

  inlineStyle = ' height: 165px; width: 545px; »

  tabularData = "#{pageFlowScope.performanceDetailController.productionDevList}" >

  < dvt:background >

  < dvt:specialEffects / >

  < / dvt:background >

  < dvt:graphPlotArea / >

  < dvt:seriesSet >

  < dvt:series / >

  < / dvt:seriesSet >

  < dvt:o1Axis / >

  < dvt:y1Axis / >

  < dvt:o1TickLabel >

  < dvt:graphFont size = "10" / >

  < / dvt:o1TickLabel >

  < dvt:legendArea automaticPlacement = "AP_NEVER" / >

  < / dvt:areaGraph >

  Hello

  So that the axis of the time to display, your data must be provided as java.util.Dates.

  Demo:

  http://jdevadf.Oracle.com/ADF-richclient-demo/faces/feature/graph/timeAxis.JSPX

  Doc of the tag:

  http://jdevadf.Oracle.com/ADF-richclient-demo/docs/DVT/tagdoc/dvt_areaGraph.html

  Doc link above tag:

  The time axis

  The graph area displays a time axis when the dates (type java.util.Date object) are specified for the column labels. Several timeXXX attributes are defined on the chart tag to customize the time axis. The child tag timeAxisDateFormat control the format in which are displayed time axis labels.

  You will also need to set the attribute timeAxisType on the chart.

  Valid values are the following:

  • TAT_DEFAULT - (default) gives an axis of discrete-time for bar, line, area, combination or graphics stocks and for all their subtypes, if the following conditions are met: (1) the Dates must be at the forefront of group and dates (2) must be held at regular intervals. Discrete time axis is plotted on the ordinal axis, which is also known under the name of the O1 - axis. This constant indicates the following relief position if the requirements are not met: the time axis is disabled and all labels are converted to strings.
  • TAT_IRREGULAR - provides an axis of continuous time on the x axis for bar, line, area or combination of graphics (only for dual-Y subtypes and split). Stacked charts are not supported. Additional requirements are: (1) the Dates must be on the edge of the group, the dates (2) must take place at regular intervals (sorted or unsorted), and (3) that a single dimension (layer) can exist on the edge of the group, if the data is provided via interface DataAccess. This constant indicates the following relief position if the requirements are not met: Dates (if any) are converted to strings, the time axis is disabled and an AlertEvent is triggered for all the AlertListeners that are saved with the graphic.
  • TAT_MIXED_FREQUENCY - provides an axis of continuous time on the x axis for bar, line, area, combination or dispersion for subtypes dual-Y and split graphs. Stacked charts are not allowed. Additional requirements are: (1) data cells must contain dates, (2) data to plot on the x-axis must be of type Date and (3) data to trace along the y-axis must be a number.
  • TAT_DEFAULT_STRICT - using discrete time axis, as described in TAT_DEFAULT, except that no fall-back position is available. If the conditions are not met, an error message appears.
  • TAT_IRREGULAR_STRICT - using continuous time axis as described in TAT_IRREGULAR, except that no fall-back position is available. If the conditions are not met, an error message appears.
  • TAT_MIXED_FREQUENCY_STRICT - using continuous time axis as described in TAT_MIXED_FREQUENCY, except that no fall-back position is available. If the conditions are not met, an error message appears.
  • TAT_OFF - disables the time axis.

  Hope this helps,

  Katia

• Binding of WPF graphics and definition lines and plots only in the ViewModel

  Hello

  is it possible to bind all the Axes and all parcels in the Viewmodel?

  Now I've set the Axes and the plots in Xaml, but I want to generate momentum. Is this possible via the ViewModel?

  My graph now looks like this:

  My ViewModel looks like aktually like this:

  public ChartCollection[] chartCollection { get; set; }
  
     chartCollection = new[] {
          new ChartCollection(1000),
          new ChartCollection(1000),
            new ChartCollection(1000),
          new ChartCollection(1000),
                   new ChartCollection(1000),
          new ChartCollection(1000),
                   new ChartCollection(1000),
          new ChartCollection(1000)
      }; 
  
  and data-insert :
    test = hw.T_a1Actual.ToString();
      chartCollection[0].Append(hw.T_a1Actual);
      chartCollection[1].Append(hw.T_a2Actual);
      chartCollection[2].Append(hw.n_a1Actual);
      chartCollection[3].Append(hw.n_a2Actual);
  
  }));
  

  But I want to generate all the Axes and all dynamic plots. What is the best way to do it?

  I can do this via the ViewModel?

  Thanks in advance

  Manual

  Do not forget that the plots and the scales on a graph are just components and not the user interface objects themselves.

  It would be possible, with little code, take a set of models 'conspiracy' and 'axis' models and generate plots and lines of them, which could then be synchronized with a graphic. If expose you the Plot and AxisDouble components on the model, then the synchronization code would be necessary:

  public static class GraphExtensions {

  // Private property to hold on to synchronizer.
        private static readonly DependencyProperty PlotsSynchronizerProperty =
            DependencyProperty.RegisterAttached(
                "PlotsSynchronizer", typeof( CollectionViewSynchronizer ), typeof( GraphExtensions ) );

  // Public property to declare source of Graph.Plots collection.
        public static readonly DependencyProperty PlotsSourceProperty =
            DependencyProperty.RegisterAttached(
                "PlotsSource", typeof( IEnumerable ), typeof( GraphExtensions ),
                new PropertyMetadata( OnPlotsSourceChanged ) );

  public static IEnumerable GetPlotsSource( Graph g ) {
            return (IEnumerable)g.GetValue( PlotsSourceProperty );
        }

  public static void SetPlotsSource( Graph g, IEnumerable value ) {
            g.SetValue( PlotsSourceProperty, value );
        }

  private static void OnPlotsSourceChanged( DependencyObject d, DependencyPropertyChangedEventArgs e ) {
            var graph = (Graph)d;

  // Retrieve existing synchronizer, or create a new one for the target graph.
            var synchronizer = (CollectionViewSynchronizer)graph.GetValue( PlotsSynchronizerProperty );
            if( synchronizer == null ) {
                synchronizer = new CollectionViewSynchronizer { TargetCollection = graph.Plots };
                graph.SetValue( PlotsSynchronizerProperty, synchronizer );
            }

  // Synchronize graph's plots with new source.
            synchronizer.SourceCollection = CollectionViewSource.GetDefaultView( e.NewValue );
        }
    }

  In XAML, you can set the property attached on the chart as:
      
  : where the model exposes a collection or the observable collection of Plot objects.

  A similar attached property might be set to synchronize the Axes collection on a graph with a collection of model.

• When you use a left and right axis, how to choose what issed axis for the value of y GetGraphCursor?

  I use a graph with a left and right axis (2 data sets).  I try to use a slider to select a point in time (x) and the values of y in the two sets of data.  I can't understand how the control, the value that is returned for the value is when you use the GetGraphCursor call.

  GetGraphCursor (panelHandle, PANEL_GRAPH, yourCursorNumber, & x & y)

  Using SetCursorAttribute with the attribute ATTR_CURSOR_YAXIS must be what you are looking for. The online help for this attribute explains wery well:

  Description: Used to change the y-axis which is associated with the bar graph.
  When a graphics cursor is created, the Y axis with which it is associated is determined by the value of ATTR_ACTIVE_YAXIS.  Subsequently, the association can be changed using ATTR_CURSOR_YAXIS.
  The y-axis associate serves as reference for the coordinates of the cursor position in calls to SetGraphCursor and GetGraphCursor.

• Graphical waveform data to excel

  Hello

  I have the waveform CQI continues with time on the x-axis and the Amplitude on the y-axis. I want to logg in excellent for seconds of each device and data data in Excel must add to previous data. Eventually, two columns, we're at the moment and other for amplitude for 10 seconds. Some help me plz.

  First create an Excel CSV file - open Excel, choose delimited for save as type CSV comma and the name of the file to anything you want.

  It might be easier to suggest how to export data in high file if we could see your VI. You can follow the following steps to get two columns of data in Excel exported from labview.

  (1) create table to 2 dimensions for your y and x values by using the array build function.

  (2) wire the output of the array build at the entrance of meashrement vi writing 2d data. Thread at the entrance to the path to the CSV created as shown above.

  (3) wire the constant true to add to the entry of the file to write to measure vi.

  (4) make sure that it is not a broken arrow to run arrow and code is complete and all the required inputs are connected properly.

  She's. Run the vi that data should be exported to csv file that you created previously.

  It may be useful

• Envy 14 update of windows 8 1050ca, graphics and audio problems.

  After the installation of windows 8, my graphics and audio drivers are two no-shows. "This device cannot start.

  I noticed the thread referenced here for this problem of graphics and we tried everything suggested this back and forth so far without success. In General, if compatibility is set to windows 7, as suggested, it never even finished installing. Just, it freezes and sits there indefinitely.

  Is there something else to what can be done? I love this computer, I have always been happy with the HP, but this poor thing is useless for me with no graphics capability sound and only very little while both cards apparently burn simultaneously. I had problems with drivers before, but he has never been much of a dead-end.

  Help? Anyone?

  Solved my problem.

  For those who have a similar problem, this man is a magician:

  http://leshcatlabs.NET/index.php/2012/11/catalyst-12-10-WHQL-unifl-for-amdintel-graphics/ All the features, fully up to date driver.

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• Cannot delete items in documents and data for each application

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Can someone help me?

  Thanks in advance

  Omari says:

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Explain what you do and what happens when you try to delete the data.

• HELP: My Macbook Pro tells the bad year and date!

  It's horrible. I am a user of Macbook Pro of Israel. The current date SHOULD be September 1, 2016, but that's what I get for some reason any. It was good but I messed up it somehow and I tried over and over again but I can not change the year and date! It says 28 AV 5776 instead of September 1, 2016. PLEASE SAVE ME!

  what I mean:

  Go to System Preferences > region and language and make sure that the calendar is set to Gregorian

• How to remove documents and data in the iphone app podcast 6

  I know how to remove each podcast, but how do I remove "documents and data" in the application of podcast?  I have more than 4 GB of data and documents.

  I think I found a thread that is useful for you: https://origin-discussions-us.apple.com/thread/6822791?start=60 & tstart = 0

  Sonny3301 answer worked for me, «...» "(The steps are: 1) download the Battery Doctor app on your iPhone (it's the first one that appears in the search) (2) hit the"Junk"icon on the bottom and tap 'Clear Cache'." (3) repeat until your space becomes available. The people that I learned this technique of some other bulletin board said it took 10-15 tries; It took me + 30 attempts. The memory savings start small at first, then it starts to hit hundreds of MB at a time. It sounds crazy, I know, but I went to have less than 200 MB of free space for 3.6 GB. Great thing, it was my podcast app had only been hogging to 1 GB of data, so the app battery doctor found 2.6 Go elsewhere. Good luck to you all and you are welcome. »

• Time and Date setting

  In general - the time and date settings can I put two areas. I want to see two areas on my status bar. Don't want an app for that.

  I'm afraid, which is not supported by the firmware. If you want that for any update to update future iOS, let Apple know your wish using this link:

  Apple - iPhone - Feedback

• AutoComplete suggests my user ID and date of birth on the log in page of my savings account - how can I stop this?

  Most of the time the AutoComplete is really useful. However, when I connect my savings account, my user ID and date of birth are available, allowing anyone on my PC to check my account (a security code is required for all transactions which does not seem to be autocomplété!) - how can I turn off this please? This started because I reset Firefox (because of the slow, such as recommended by Firefox). Thank you.

  I know how you can do this:

  1. Delete an AutoComplete suggestion menu entry drop-down
  2. Disable completely auto form fill
  3. Clear all saved form autocomplete entries
  4. Entered AutoComplete clear form selected (using an add-on)

  but I don't think that Firefox has a built-in feature to be selective in what he recorded in the first place.

  For items numbered above:

  (1) when the suggestion appears, use the arrow keys on the keyboard to select the suggestion unwanted in the list and press the delete key.

  See: control if Firefox automatically fills in forms.

  But I don't think that this blocks Firefox to save again in the future.

  (2) change your privacy settings in the Options dialog box

  "3-bar" menu button (or tools) > Options > privacy

  If set ' Firefox will be: remember history ' to take ' conservation rules: use the custom settings for history. " Then you can uncheck the box ' Remember search and form history.

  (3) clear all AutoComplete form data saved

  To clear everything, you can use:

  button '3-bar' menu > history > clear recent history

  If you do not see a list of check boxes, click the Details button. Deselect all categories other than "Form & Search History" for those who are kept. At the top, set the time interval, and then click clean now.

  (4) clear SOME saved form autocomplete entries (when you are not currently using the form)

  You need an add-on for that. In the past, I've only tried this one, but there might be other good: https://addons.mozilla.org/firefox/addon/form-history-control/

• How I dissable graphics and have only the text when you open a site?

  Y at - it an option to turn off the graphics and text only for web content?

  Hello, the next addon comes with a toggle to disable the loading of images & plugins on the Web sites: https://addons.mozilla.org/firefox/addon/quickjava/

• Documents and data - storage leak (bug?)

  Hello

  iPhone 64 GB, ios 9.3.2 6s.

  The question is:

  Documents and data to develop up to 32 GB (what I saw), as seen on iTunes and the phone ran out of free space.

  This happens already months ago, I did not find any application causing it or either messages or e-mail account, I finally had to make full backup and restore via iTunes to purge this unknown space. I thought that behind me, but still, less than months then after full restore documents and data weight approximately 32GB, that's enough, before I restore once again, someone has an idea?

  I tried everything to locate the space of simple storage up to PhoneClean, safeeraser, iFunBox management screen, I have no idea what is causing this problem...

  also tried google the question, found only on the topics related to applications causing, but I already tried to remove all his apps manually one by one, which did not help

  We hope to get some intel.

  Thank you community

  Try to restore as new, not backup your backup is probably damaged. The fact that this has happened two times points to an application or system corruption in the backup. Then download apps you want from scratch. I had to do it myself in the past, unfortunately, no fun, I know.