Gray and reversed when importing

Similar Questions

• Netflix and some games go gray and black when I put the mouse on them.

  When I put the mouse on some games and all the netflix movies, they're going grey and black & wont allow to interact with anything in this area, what should I do?

  Hi Michael,
   
  The issue you described could occur due to corrupted display driver. I will help you solve this problem.
   
  Please provide us with the following information so that we can better help you:
  1. What is the brand and model of the computer?
  2. don't you make changes to the computer before the show?
   
  Perform the troubleshooting steps below and check if helps solve this problem.
   
  Method 1
  Install all the Windows Update including the optional updates on hold and check the issue.
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/updates-FAQ#1TC=Windows-7
   

  M odes 2

  Check if you find an error in the Device Manager, if you find an error, update the driver for this device.
  1. press Windows + X , and then click Device Manager to open it and check if you find an error.
  2. If you see an error, then make a right click on the driver and then update.

  Method 3

  If the problem still persists, then download the website of your computer manufacturer display driver and then install it.

  You can also read the article below to learn more about the troubleshooting steps on this issue.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  https://support.Microsoft.com/kb/2681286

  Note: If you run Microsoft Safety Scanner then the data files that are infected by the virus should be cleaned exclusively by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. If not, please write to us with the required information, so that we can offer you additional troubleshooting steps.

• Resolution blurry and pixelated when importing.  Original is fine.

  I imported a 3 minute MP4 video in Premiere Pro. The original seems well but in the source window, the resolution is blurry and pixelated.  In the program window it is pixelated so I changed the resolution of reading on 'Full', but it does not help. What I need to change the original? or y at - it another way?

  Floramc & Ann Bens

  Eureka, I changed the frame rate and the video is now clear (no pixilation).  I did this:

  -In the project window right-click on the name of the video clip

  -Change

  -Film

  -Under the frame rate tab, select "Assume this Frame Rate"

  -Replace the EN you want.  I changed it to 25 and now it comes out clear.

  Thanks for all your suggestions.  It was a quick and easy solution once I found it.

• New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I have

  New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I get a message that says no. Photos import active.

  This means that you have previously imported these pictures/videos into Lightroom, and you must not (and are not allowed to) import them again.

  Go to your library Module (not the import dialog box) and find the photos, then you can make use of them in any way you want in Lightroom.

• When opening Firefox, all beginning tabs connect without websites, gray treatment circle on each tab periodically return to gray and green tours.

  When I run firefox opens not the normal page and rather the tabs start connection and without any Web site and the gray circle that each tab has fired green, and gray and the process repeats. And if I try to type an address that I can not because the support of 'w', it tries to connect to what I don't know.

  Hello, it sounds like a theme or extension could be interfering here. Please, try to start firefox in safe mode once and see if the problem occurs here also. in case it does not work, please go to firefox > addons > extensions and disable/remove no matter what extension that suspicious look / you install not intentionally, or which may interfere with the load behavior tab.

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• I'm trying to import my IE Favorites and have read the instructions on how to do it, but the import button in the file in gray and will not let me import. Any ideas?

  I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?

  Try using the import option in the Bookmark Manager (also known as the name of the library)

  1. In Firefox, select the bookmarks menu, then "organize bookmarks" open library
  2. In the library, select "Import and backup" then "Import HTML.
  3. You should get I hope that the ability to import from Internet Explorer.

• How I change DEP? When I go to the 'systems' and 'Advanced... '. "and finally access, it is gray and allow me to change

  When I go to the 'systems' and 'Advanced... '. "and finally access, it is gray and allow me to change

  Hello

  did you follow these methods?

  How to enable or disable DEP in Vista and Windows 7

  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  How to enable DEP on or off for a program in Vista and Windows 7

  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

• How to select the photos I want to import in the import Windows 7 Wizard, and how to change their name to a group of the name custom when importing?

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  ===========================================
  Perhaps the following links will propose a few ideas:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
  (don't forget to extend "Import in the view settings" at the bottom of the page)

  Windows 7 - How to make photos from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  You might find the free Picasa software or Windows Live Photo Gallery
  to be useful:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Picasa
  http://Picasa.Google.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Change the time and date of deposit when importing

  Hi everyone, when I import images in my project, automatically first change date and time with the current date and time in the finder. So each imported file have changed the time and date when I search in the finder under the "created" or "modified" column, is this normal?. There is no way to avoid this?

  Thanks in advance

  Yes, you can prevent this! Go to the preferences of first and go to the media section. Uncheck "Write XMP IDS to files on import". Boom, done. First will not add his small beacon of metadata files when you import them. This isn't a huge deal for most publishers except Adobe apps could create media Cache files more than necessary if you re - use clips in other projects. Don't forget, however, anything, if you change the metadata (in the project Panel or metadata) file, it'll still change changed data for the clips.

• I imported a bunch of photos of my Office I retouched and then when I tried to export it didn't export many and is saying that they lack :(

  I imported a bunch of photos of my Office I retouched and then when I tried to export it didn't export many and is saying that they lack

  Hi rochelleh35569723,

  I beg to reconnect please images in Lightroom: Adobe Lightroom - find folders and files moved or missing

  Kind regards

  Tanuj

• When I make a video using CC and try to import a piece of music I get the response "could not complete your request because DynamicLink is not available.

  When I do a video using CC and try to import a piece of music I get the response "Could not complete your request because DynamicLink is not available" - any ideas please?

  Could not complete your request because the DynamicLink media server is not available. | Error postal codes of Mylenium

  Mylenium

• When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

  When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

  Windows? Update your driver from the website of the manufacturer of the GPU video card.

• LR 4 and 4.1 can't create new folder manually when importing photos

  Windows 64, i7, 12 GB of RAM

  I don't seem able to create a new folder manually when importing photos.  It still works fine on the same PC with LR3.6.  Anyone else seeing this?  Thank you.

  

  Yes, I'm on Win7. I can get the result that you specify.  I right click on the folder name in LR and then choose "Create a new folder."  This shows the dialog box windows.  If I then right-click in the right pane and select new > folder, I get a new folder empty in the right pane and can type the name, then select this folder.  If, instead of click with the right button in the right pane, I try to type the name of the new folder in the bottom of the dialog box where it says "file:" then I get this error message. That's what I mean by saying that the process has changed slightly in the LR4.

• What is the difference between Unicast RPF and Reverse Path Forwarding?

  I am confused between Unicast RPF and Reverse Path Forwarding function.

  What is the difference between Unicast RPF and Reverse Path Forwarding?

  Because they have all two please check the address of the source of each package before sending it to the destination too?

  Reverse Path Forwarding is used only when the network want to build a tree shared multicast communication and then we must use Unicast RPF after creation of the shared tree?

  The mechanism of the RPF is mainly used to ensure no loop of routing traffic.

  As you probably already read, it does by ensuring that his route to the source address of a packet received is accessible via the same interface that the packet is entered in the. Think of the notion of "root port" in STP. all root ports are similar to the root, sunflower follow the Sun. Therefore, it is naturally a loop prevention mechanism.

  With multicast traffic, it is quite likely to create multiple loops of routing the nature of 'destination' traffic. For this reason, using a mechanism as the RPF to ensure you are on the "road to the root" (to say) to the source originating multicast traffic. Otherwise if you're not then you either receive this traffic route in a loop, or a suboptimal path.

  uRPF works essentially the same way, except that it is done for unicast traffic instead. Now with unicast traffic your flow is from a source and directs to a single destination. Given that, as the fact that you are using a dynamic routing algorithm (which allows to select the path to a destination), you can have loops of your network for unicast traffic flow routing; of course there may be exceptions to pitfalls of configuration route redistribution.

  However RPF when it is applied to traffic unicast can add another advantage, and it's verification IP source. That's why we can use it as a security mechanism to ensure that data are from where it is supposed to come.

  On the limit of the L2, you then have mechanisms such as guard source IP to ensure that the correct host is not usurpation of their IP address.

  By analogy RPF can be used for checking at source for multicast traffic, and it is intrinsically that however, the most important role is so that it can be used to guarantee without loop routing of multicast traffic.

  I hope that helped clear things upwards and not confused you any more with all this.

• Loss of quality when importing video to the editor. What should I do?

  I did a HD video with my camera and need to change it, but when I import it into Adobe Premiere elements 13 quality decreases. How to maintain the optimal video quality when importing it?

  Arthurs

  What version of Premiere Elements and on what operating system works - it?

  What is the brand/model/parameters of the camera that records video? What is the file extension that is associated with the file? What is the bit rate of the file that is imported?

  Is the decline in quality import and when you watch the video in the Edit area monitor? Or do you see loss of video quality when you view this Timeline content export? When you view the video in edit box monitor, you're looking at timeline rendered or unreturned content? No coloured line, orange line or a green line on the content of the timeline?

  What you are (manually) or the draft definition (automatic) the project preset to match the properties of the video source? Please tell us what the readings are for the fashion edition of time base, image size and Pixel Aspect Ratio (even if the appearance of the gray fields) under Menu/change settings/general?

  Many more questions on dating on your video/graphics card version of the pilot and others, but let us examine and consider the foregoing and then decide what then.

  For any question or need clarification, please request so that we can customize a response for you.

  Thank you.

  RTA