Grep question: withdrawal dates and media

Similar Questions

• Operating system will not start and run - error codes 2000-142, 0F00:075 D, 41166486 uncorectable data error media wrtie block protect error code 0F00-0244

  I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks.  Can I fix?  Joe

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to start the computer in safe mode and check if you can start the computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Windows Media Center photo date AND time

  Is it possible to have Windows Media Center to deliver photos in Date AND time order.  I have several photos taken at a given date in my folder, but WMC puts in the random time sequence in a date.  My Pictures folder is in date and time order

  Hi gingerandbuddy,

  Follow the steps below to organize photos in media center in groups.
  You can only group by alphabetical order and date wise, but you can also add the tag for photos that would make it easier to find photos.

  1. on the Start screen, navigate to pictures + videos, and then click picture library.
  2. click on Folders to sort your files and folders in alphabetical order, click date taken to sort your folders and files by date or click tags to sort your files by tags that have been applied. (To learn more about labels and how to use them, see tag pictures so they are easier to find.)

  Play video and watch pictures in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/play-video-and-watch-pictures-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Release date and modified Date Scripting Question

   var contentsOfFrame =  
              doc.name+"\r"+  
              getLogInUserName() +"\r"+  
              getLocaleDateString() +"\r"+  
              getDateModification() +"\r"+ // Whats the Coder for Date Modified?
              getOutputDate()+"\r"+ // Whats the code for Output date?
              getAppUserName();  
  

  I can't find anywhere what should be the Modification Date and the release date.  Can you please help.

  Try this site:

  http://www.indesignjs.de/extendscriptAPI/indesign11/#VariableTypes.html

• Question about the Date and TO_CHAR fields

  I ran into a date format today I need to replicate but I don't default with. I work with a based REST webservice that wants its dates and hours of formatting to ' 2009 - 09-29T 17: 00:00 - 04:00 '. When is 2009-09-29 17:00 et. Is there an easy way to reproduce this output in oracle, so I can feed him in the web service?

  You are looking for:

  with my_tab as (select to_timestamp_tz('2009-09-29T17:00:00-04:00', 'yyyy-mm-dd"T"hh24:mi:ssTZH:TZM') col from dual)
  select to_char(col, 'yyyy-mm-dd"T"hh24:mi:ssTZH:TZM') ts_col
  from   my_tab;
  
  TS_COL
  -------------------------
  2009-09-29T17:00:00-04:00
  

  Published by: Boneist on October 6, 2009 16:59
  Realized it's timestamp-> tank you were after, not the reverse. Fixed!

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• L20-198 error 0271 check date and time settings

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

• Two questions about SP1 and Vista startup

  Hi all
  two questions:

  (1) I understand that if I want SP1 on my machine, I have to install manually, because it is not included in the automatic update routines?

  (2) my machine failed yesterday, I received a message "unable to start Windows. A recent hardware of software change might be the cause. "The only thing I can think is that before turning off the previous time, I inserted a USB hard drive to copy the files on it. But I continued to work normally on the machine. Another unusual event, it is the day before, it was very slow to start, so afer it finished start, I restarted.

  When the system could not start, I tried several times, automatic procedures that always ended with "windows cannot resolve the issue automatically,
  Contact your service provider. In the last attack, I also clicked on a 'Advanced tab' and restored the system, but it does not solve the problem. Then, this morning I turned on the machine again to write the exact error I have, and message instead, unexpectedly (and rather willingly), the machine starts normally. So, what could happen? Should I get my machine (which is less than one month) verified?
  Thank you!

  Paola

  Hi polla.

  (1) Yes, Yes. You must download and install SP1 manually.

  (2) No, I'm Don t think that you should check. I would say: work with it and if the error appears, back up all your data and restore complete your system, so you can exclude any type of software problem...

  Welcome them

• Satellite A200 - Question on RAM and HARD disk partitions

  Maybe it's in the wrong section... I do not know.

  I've never owned an OEM operating system and I do not understand why the HARD disk is partitioned, 90, 2, 90 (who thought of that?).

  The thing is that I have to format and partition differently (since I dual boot Linux) and need to create a structure more like 40,40,100 or such. (100 in fat32, so data is available for both)

  Now I wonder what data should I keep these readers. There is a folder called Toshiba on the C:\ drive that seems to have the drivers and such, some wallpapers and who knows what else. Then there's the WinRE called D: drive which has a kind of sdi and wim files.

  Another question, if I buy the 2 GB that is listed in the compatible options for my laptop (A200 - 28 p)
  Link: [http://uk.computers.toshiba-europe.com/innovation/jsp/individualOptions.do?service=UK&OPTION_ID=138301&t oshibaShop = true & SelCategorie = 4700]
  It will match the 2 GB already in the laptop? It will void the warranty anyway?

  Hello

  > I've never owned an OEM operating system and I do not understand why the HARD disk is partitioned, 90, 2, 90 (who thought of that?).
  I assume you are using Vista.
  The 2 GB partition is a hidden partition which contains the data and the backup files in Vista. This partition will be automatically created during the installation of Vista.

  On the other partition 90GB.
  Well, this partition (partition of data) can be used to store files such as photos, movies, personal documents, etc. it s always recommended to partition a large HDD in more partition. This improves performance because the OS can access files much faster.

  Of course, you can change the size of the partitions. In Vista, you can change this in disk management.

  Regarding the upgrade of RAM;
  The laptop seems to supports the Intel® PM965 chipset and it manages 4 GB of RAM. It seems that you could use a 2 GB of RAM in one slot.

  Welcome them

• Removal of Documents and data and other

  Material: iPhone 5

  Software: iOS 9.2 (at day, on this day)

  I have an old iPhone 5 that I'm redirecting as music player. I did a thorough cleaning ("erase all content and settings') of the device before you start. I copied the music on it (via iTunes on my MacBook). After a few moments, I noticed that the use of "Documents & data" is now about 900MB, and 'Other' is about 350 MB. What is this, and how do I empty?

  There are no installed applications (other than those which are by default on the phone). He has been in flight since the reset mode (but with WiFi and Bluetooth on), and it is an inactive SIM (got a new with my new phone, so this SIM has been disabled by my company). The only active account on my Apple account. No email, social media, etc. accounts are configured. There is no photos, videos, podcasts, or anything else on it. The use of the storage (under 'manage storage') shows some nominal storage by default applications (from 16 KB to 2 MB) and there is nothing further stated within each application.

  Then... What is only 1.25 GB of things which are appeared unexpectedly? And more importantly, how can I get rid of him? Other than music files (and the music app), there is no other applications or data on the iPhone that needs to be saved.

  Thank you.

  'Other' data the iOS itself, as well as any app data, messages or email.  350 MB is low, so it's mainly the iOS.  The Documents and the data is most likely the work of art album data, and associated playlists etc.

• Adding a date and time to create a channel in a data plugin

  I would like to preface this question with the fact that I am new to VBS programming.  What I want to do is to create a plugin. Most of it is done, but I'm having a problem with the addition of two times to a.  I have a text file that stores the date and time separated by a tab character.  This file format was designed to excel.  When I bring him both the date and time are in different channels and I can not figure out a way to add both and either replace them or even place it in a separate variable.  Here is an example.

  Chan (1) contains the date, Chan (2) contains both.  This statement, which places the data in the string is:

  The StandChannels value (0). Values (k) = Chan (1). Values (i)

  I tried:

  The StandChannels value (0). Values (k) = Chan (1). Values (i) + Chan (2). Values (i)

  error: object doesn't support this property or method

  or

  Chan (1). Values (i) = Chan (1). Values (i) + Chan (2). Values (i)

  error: object doesn't support this property or method

  I tried several other iterations and have had no success.  This seems to be an easy task, Miss me probably something simple.

  Hi Eric,.

  The first problem is that your datetime format string was wrong, you need to use:

  File.Formatter.TimeFormat = "MM/DD/YY SS.fff.

  Or maybe if your year is first of all it must be:

  File.Formatter.TimeFormat = "YY/MM/DD SS.fff.

  The second question was slippery.  The newsgroups (0) you throw combines the ProcessedChannel values correctly, but you were not successfully picking off those that you wanted to leave Chan (0).  I don't really know why the method you were using did not work, but I found a similar one that does.  Note that I've only changes part SUB New_File (file, ChanNames) of the code, not the SUB Previous_File (file, ChanNames) part of the code (got tired of typing).

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• 'RT Set date and time' does not define the UTC seconds

  Hallo,

  I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the vi "the Date and time value. But the second I get home are ADDED to the current time and not defined as the new value.

  Even the vi illustrates this behavior: I've set up a vi time where in a loop (100ms delay) and reread. When I put in local time stop the clock (as expected), but when I put the UTC time the Dungeon seconds on the run...

  Can someone help me with this problem?

  Thank you

  Florian

  Hi Florian.

  After posting your version of LabVIEW, I found an answer to your question:

  The behavior you're seeing is a known bug that has been fixed in LabVIEW 8.5.1. Workaround is to use set local time instead.

  Let me know if you have any other questions.

• Save the text data and digital

  Hello

  It is two part question/need help: -.

  1. I want to display the same number of decimal places on the table as in the attached picture.  In addition, include text on the last column of entry (as shown in the picture).

  2. I also want to save the data in a file where there are also many digital data and textual data as shown in the picture as an attachment.

  Any help will be greatly appreciated.

  Thank you

  hiNi.

  You must format the values separately and mount it as an array of strings. I don't understand the purpose of the shift register. Why are there controls and a case user operated inside the loop structure, because the loop will run so fast that any user control would be unpredictable.

  Here's a simple code (LabVIEW 8.5) that you could use. Modify if needed.