Group home is not only to create home group is displayed

Similar Questions

• v.31: NoScript, initial home page are displayed correctly, but the tabs are not displayed correctly

  I'm under FF with NoScript, never "do not forget history," "Tell sites I don't want to be followed," not selected "Remember passwords for sites" and no Flash. My search engine is Duckduckgo. I use FF for private surfing. If I want to watch the video, I use IE11.

  V.30 with before, I could never see how to configure FF to view my homepage of duckduckgo.com , when I created a new tab. But this is only a minor annoyance because I just click on the Home button.

  Now with v.31, when I create a new tab I see nine rectangles where my story would be represented, if I had not turned off. At the top is a search box with Duckduckgo. However, when I try to use the search box, I see a message 'this page requires JavaScript. Download no - JS here. »

  What is the point of allowing my Duckduckgo home page to display properly when FF is displayed first, but the following tabs require is at the bottom right of the screen and select NoScript "temporarily allow all this page" or by clicking on the Home button? From my point of view, this is not an improvement, just something different to look at.

  I put my home page at https://duckduckgo.com/html/, in other words, the version that FF suggested, but nothing has changed.

  I don't need JavaScript enabled for the new integrated tab page, but it might be because I disabled the search suggestions.

  Here's how to set your new tab to DuckDuckGo page:

  (0) as the first step, copy the full URL in the address bar of the search page. This will stick you to step 3.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page - paste here

  Press Ctrl + t to open a new tab and check that it worked. Success?

• Ctrl-alt for double layer now duplicates groups not only the layer?

  I almost always duplicate the objects or layers by using ctrl-alt drag (while using move tool) to duplicate the layer.  Now, in the last Photoshop CC 2014 it duplicates the not only the layer group.  Is this a setting?  Thank you

  Well, obviously, in the December Update they fixed it... It must have been a glitch in the previous update.  So if you have this problem - update to December was last updated.

  Thank you

• Windows Search service does not have to create the search index created, 0x80040d66, failed to add the Application to collect internal error

  769 events

  The most recent Instance was on:

  Error of 2010-06-14 22:47:36 search service search 1006

  Log name: Application
  Source: Microsoft-Windows-search
  Publication date: 2010-06-14 22:47:36
  Event ID: 1006
  Task category: Search Service
  Level: error
  Keywords: Classic

  Trial has been on:

  2010-05-11 Error 1006 research service 01:46:40

  Previous info from event viewer.

  Services:

  Windows Search

  Start the service

  Error message:

  Windows could not start the Windows search on the Local computer. For
  more information, check the system event log. If it's a
  non-Microsoft service, contact the service vendor and refer to
  service special-2147218141 error code.

  Windows Journal system (in the event viewer) for the Date and this has occurred first:

  Error on 2010-05-11 01:46:40 Service Control Manager Eventlog Provider 7024 no

  The Windows Search service stopped with the special service 2147749155 (0x80040D23) error.

  Log name: System
  Source: Service Control Manager
  Date: 2010-05-11 01:46:40
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic

  We are all ONE!

  I tried some of the solutions that offered you, but I think what was my problem was caused by the presence of the index on an external hard drive and when the computer has been restarted the drive letter of the USB drive was not the same.  If I remember well, it was a problem that I wasn't yet able to rebuild the index.

  I now have the index on my hard C at the level of the root drive.  I was about to point to the other half of a 16 GB flash drive which is also USB, but Windows Vista Home Premium does not only because it appears that are considered removable flash drives, but external USB drives are not presented in this category.

  Currently I have about 74 000 items indexed.

  We are all ONE!

• How is it that after that I updated to Firefox 8.0.1 I have not only lost my bookmarks toolbar, but FF opens two tabs, whenever I open it?

  After I updated to FF 8.0.1 I lost my bookmarks toolbar. Every time I open FF, the toolbar is missing; only the stars and "Bookmarks" will appear on the line, but everything else is missing. Can I get back if I uncheck it and then save in the options.

  Not only that, but now, when I open FF, it automatically opens two tabs, instead of one.

  I tried to uninstall and reinstall, I tried to reset my toolbars and opening in safe mode, but none of this has worked.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Windows 7 - import of photography wants to import all THE photos, not only news

  Try to import some pix of my camera.  Windows want to copy all of them, not only in the new.  How can I choose what pix I want to import without having to import one at a time or having all my camera pix downloaded over and over again?

  When AutoPlay appears, select open folder to view files, select view by date, highlight them with the date you want, doing a right click and select copy.  Navigate to where you want (probably a folder in my pictures), create a new folder with the title you like, go to this folder and right click, select Paste.

• Was a backup, and the only file created was mediaID.bin.

  Title of the Moose: I ran a backup and the only file created was mediaID.bin.  That all my personal files, but also the backup system files contain?

  I am running Win 7.  I chose to let Windows choose the files, but I thought he said that personal folders could be saved.  Not sure if.  If this .bin file contains everything, I can choose just to restore personal files from it?  I am naïve.

  I saved on a flash drive.  When the backup finished the only file in the Explorer was mediaid.bin, but when I reinserted the drive he showed several zip files and those that do not contain my personal backups, so all is well!  Sorry for the problems with my idiocy!

• Can I apply changes in tone to a layer and not only some cut of my film?

  I can't explain it properly, I'm eager to apply the same color to my whole film correction and not only the edited part of my film that I would need to do this for all the clips, and that feels like a marathon task.

  So I want to affect blacks and shadows for all "Video 1"and not just the clip cut as shown below."

  Thank you in advance...

  

  Remove the Lumetri effect on the first clip.

  Go to the menu sequence > add tracks.

  Set it to add a video track after track 1 and 0 audio tracks. Click OK.

  Go to the file menu > New > adjustment layer and create an appropriate adjustment layer.

  Once it is created in your program Panel, drag it to the new video track (empty), you just create and stretch the length of the clip it so that it covers all the video clips on track 1.

  Click on the adjustment layer to select it, go to the color workspace and make the desired settings. Everything below the adjustment layer will receive the same treatment of color.

  MtD

• Files not found when creating a catalog of "master".

  I've been using V LR 5.7.1 and today I bought LR V6.

  With the old version I was using multiple catalogs and decided to create a master catalog for use with the new v 6.0

  With the keys v 5.7 in an external drive, I created a "master" catalog I imported a .lrcat but there were several photos, that the application was not found. I don't know where these files reside, but I don't know the best way to add these images to the master cat and have LightRoom "move" the file on the external drive.

  Your help on this is much appreciated.

  Since the images have already been imported, there is no "find and move." These are two separate actions.

  If you have missing files, first find the records.

  Then find the missing photos.

  If your Panel records not only shows the directory tree as Explorer/Finder made, right-click "show parent" until he does.

  If you need to move a small number of files, LR can do for you in the library module.

  If you need to move a large number of images, you are better to use Explorer/Finder to make the gesture, then 'find' the files again in LR.

• I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf

  I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf

  Hello

  Reader is software to view PDF' only.

  You must either a pack PDF to perform the function of thin or Acrobat.

  Reader is not the software to perform editing functions.

  Concerning

  Sukrit diallo

• Photoshop CS5 (12.0.4) could not open or create documents

  Hello

  Since today on a customers PC Photoshop CS5 is not open any file and create a new document.

  All other Standard Suite Design programs work as it should - only Photoshop behaves badly, both 64-bit and 32-bit version.

  OS is Windows 7 64 bit on a Fujitsu Celsius with a SSD workstation.

  Photoshop not any file create journal or no entry in the system event log.

  What can I do to solve it?

  Thanks for any help!

  Wolfgang

  Samsung magician uninstalling and restarting the computer appear to have solved...

  Very strange...

  Wolfgang

• four digits starting with 1 0001 and not only the numbering.

  How do I re name and renumber a folder of photos and include four numbers starting with 1 0001 and not only the numbering. I need this for an another computer program can keep the images in numeric order

  Now I have number say marriage... 1 Smith_Jones ect up to 659, but a program that I use to create the albumes blurs all my photos because they say the digital system must have 4 digits so number 1 is 0001 so stay in order.  I have d see how to assign 3 zeros on numbers-# 344 front would therefore 0344 LR wants to keep 344.

  In the rename library use the following custom parameters.

  

• ORA-00604 with ORA-20010: the user is not authorized to CREATE Table

  Hello
  
  I use 11.1.0.7 database
  
  I'm only running this SQL logged on as a schema PLAN. PLAN scheme a DBA privilege but I receive error message-
  

  create table SALARY.test (ID NUMBER);
  create table SALARY.test (ID NUMBER)
  *
  ERROR at line 1:
  ORA-00604: error occurred at recursive SQL level 1
  ORA-20010: PLAN is not allowed to CREATE this -
  SALARY.TEST
  ORA-06512: at line 15

  What can be the problem here?
  
  Thank you!

  user608897 wrote:

  I know that we cannot use in a DDL trigger, but how can this be a DDL trigger.

  As sybrand hinted it often allows to read a manual.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16508/srvrside.htm#CNCPT118

  >
  Overview of triggers

  A database trigger is a stored program unit compiled, written in PL/SQL or Java, that Oracle Database ("fire") automatically calls whenever one of the following occurs:

  1. DML instructions on a particular table or view, issued by a user
  The DML statements modify data in the schema objects. For example, inserting and removing lines are DML operations.

  * 2. DDL statements issued by a particular user or any user *.
  DDL statements define schema objects. For example, create a table and add a column are DDL operations.

  3. database events
  User login or closing of session, errors and database startup or a stop are events that can call triggers.
  >

  A DDL trigger is one that runs when the DDL is made as in 2 above.

  When you create the table, you run DDL, someone wrote a trigger that runs when you try to create the table, and in this trigger, they raise a user-defined exception ORA-20010: the user is not authorized to CREATE Table to tell you that you are not authorized to create the table.

• You are not allowed to create or update this content

  I am trying to create a new post, but when I click on 'Post' I get the error message "you are not allowed to create or update this content.

  Is this a bug or is it user error?

  Try again in a little, it's a known bug. Also try to refresh the page or signing in.

• Whenever I start Firefox, my home page is displayed, and then another tab of a page I looked at in the past. I don't know how to do stop loading up this extra page on start up. Suggestions? Thank you!

  Whenever I start Firefox, my home page is displayed, and then another tab of a page I looked at in the past. I don't know how to do stop to load to the top of this additional page at startup and can't seem to find information on how to disable this junk page. Any suggestions? Thank you!!

  Maybe you inadvertently set both pages to be your Homepage"(s)"?

  See How to set the home page