Grouping of the files (pictures) by the cumulative results in a group of "long".

Similar Questions

• Show the cumulative results in three different areas?

  Is it possible to have the date entered in three different areas? For example, if I get the 13/03/2016 I want to show like this, third month, 13th day, year from 2016. In three separate fields. Can anyone help with a script to do this? Thank you guys.

  I understand perfectly, the programming is difficult and requires a different way of thinking.

  "" "You're almost there. '" It may work, but there are two questions that I see that could bite you later.

  The first is that you need to "declare" the variable "theMonth" (which was in my original script, but you probably deleted when you added the table of the names of months.) You're already declare (and initialization) variables 'leaders' and 'brassy', so just add this line to these two:

  var theMonth = "";
  

  And then at the end, you can remove a line: it's the calculation for the field 'theMonth' script, which means that we do not have to set the value of the field through 'this .getField ("theMonth") .value' - because it's a calculation script, you set the value of the field calculated using the property "event.value. Therefore, remove this line from the end of your script:

  this.getField("Month").value = theMonth;
  

  That should do it.

• How to format the cumulative results extracted from the service?

  I used to get a result date of my MySQL in YYYY-MM-DD format. When it displays on the data grid, it appears as below:

  I want to get rid of the GMT my datefield doesn't have the time. How to get rid of him?

  I used a PHP service to obtain data via ZendAMF, may need to configure something inside the ZendAMF folder?

  Or maybe something to do with the class Datetime?

  

  Hello

  Yes I used it.

  You use labelFunction in one column

  in which you want to display the Date

  Thank you

  Munira

• Windows7-how can I get my photos to allow me to move the individual to the neighbourhoods, in a file, picture when they are in a thumbnail view? __

  Windows7-how can I get my photos to allow me to move the individual to the neighbourhoods, in a file, picture when they are in a thumbnail view?
  XP has allowed this and then handed over to the correct order seen again in list format

  Thank you for visiting the Microsoft answers community.

  You can organize is more manually the files in the folders - Windows 7 change is design, but if you think this is something that you want changed, please submit your suggestion on the Microsoft Connect site for your comments.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I look for a file in Win Explorer, I get a list of files in the search results. But some of the files seem to be missing. I get a message that the directory is not found when I try to open the search results.

  I wonder if what's on my hard drive and if what Win Explorer is on my hard drive are two different things.

  If I do a search in Win Explorer to "purple", I get a number of results.
  (To search for a file, I am in the word "Purple" in the search field in the upper right Win Explorer and pressing the "Enter" button).

  There are a couple of JPG files that I wonder about the search results.
  One example is called "purple_flowers.jpg".
  When I double-click this file in the search results to open it, my paint program opens and gives me a message that the directory is not found. If I use MS Paint to try and open it by double-clicking on the file and selecting "open with...". MS Paint", I get a message that the directory is not valid.

  The location of the directory on the error message is the blue 'Images' folder for my user. But, when I opened this file, I don't have a file with that name in this directory. The same thing happens with another JPG file, called "octopus.jpg" when I search the word 'Octopus '.

  Is this something messed up between what I have on my hard drive and think what Win Explorer is on my hard drive?
  How can I fix?
  Something must be reset in Win Explorer?

  I could have the JPG files with these names at the same time. I had a large library of images for a project, but I deleted it.
  (I tried to turn on the option to show hidden files in this directory, but that did not help).

  Imane:

  I thank very you much for that answer.
  But it seems to have stumbled on the solution:

  Strangely, this worked:

  (Maybe you know why).

  I moved the files in my blue images folder in another folder, delete the folder images blue, emptied the Recycle Bin and rebooted my computer.
   
  When my computer has finished its startup routines, my folder of photos blue was there! And he had the shortcut to the folder 'Sample Pictures' inside.
   
  When I searched "the Octopus" and "purple", I no longer saw these JPG files in the search results.
   
  I don't really know what happened, but I thought that after these results just in case someone else knows this.

  I'll read and watch in your information. I don't want to know more about what is happening in my computer.

  Marz

• If I delete a file in the search results pane, am I actually delete the file or just the result of search?

  I'm a bit confused about the Windows XP search results pane.  I need to winnow down remove some of the documentation noted that the results do not apply.  If I remove them in the search results pane, am I actually remove the document from the PC or just delete the search result and leave the document in its original file?

  Hello

  You delete the file. Try it yourself...

  • For example, create a document with a unique name (say qwerty987.doc) word
  • Search all files and folders to qwerty987
  • Right-click on the file in the search results, and then click Open containing folder
  • Research of two results of window and the window of the folder containing the visible file (resizing and movement to achieve, as appropriate)
  • Remove the test file in the search results window and watch it disappear from the other window too

  Tricky

• Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.

  Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.

  Right click issues are usually caused by a third-party software that put an entry in the context menu. You can solve this with the free ShellExView.

  http://www.nirsoft.net/utils/shexview.html - ShellExView

  Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
  Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

• When I run "sfc/scannow" he gave the following results; "windows resource protection found corrupt files but was unable to fix some of them

  * O.T. AND NON-RESPONSE ERROR

  Hi, my laptop (Dell vostro) has been very slow lately, when I run "sfc/scannow" he gave the following results; "protection of resources windows found corrupt files but was unable to solve some of them"

  How ca I fix it please help

  Select Start, all programs, accessories, right-click right-click command prompt and click Run as administrator in the menu dropdown. Type or copy / paste: findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt' and press the ENTER key. You will find a sfcdetails.txt file on your desktop.

  "Please note there are three spaces in the command: findstr - c/c/c, between [SR]" and%windir% between CBS.log and > ' % userprofile .

  Please download a copy of your file sfcdetails.txt on your OneDrive as a shared file and post a link here. Enter sfcdetails.txt in the search box above the Start button and press the ENTER key to locate the file created.

  Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• installation of the software gives an error 1320, too long file name

  During the installation of the CAD of DraftSight software on a system running Windows 7 Prof I get an error message 1320, too long file name and the software cannot be installed.  A work around DraftSight suggested to rename the data folder C:\ProgramData\Application, DraftSight installation and then restore the original name of the file.  A second workaround was to delete the folder, install the program and then restore the folder.  A third workarounds solution had to drag or copy and paste the Application Data folder on the desktop, install the software and then return the ProgramData folder in the directory.

  For Windows 7 teacher the problem with alternatives a & is the shortcut to the application data to other programs is lost when the name or the file is restored, leaving only an Application Data folder and delete the shortcut.  The problem with the three workaround is that the shortcut cannot be dragged or cut and paste on the desktop.

  How can I temporarily allow the program to install and create a folder of Application data in the ProgramData directory and then move the program information in the folder the shortcut pointing to?

  I would also like to know how to get the same result with Windows Home Premium where the Application data file is not a shortcut, but is actually a locked folder.  I would need to enter the locked folder information on the program.  Some users of DraftSight say the two alternatives have worked for them and I suspect that they may work for Windows 7 Home Premium, but the impact on other programs may not be obvious.

  When you try to install the program?

  Assuming that you have the ability to choose where to install the program, you can try to shorten the location.
  For example, you can try to install to C:\Program Files\Draftsight\ or if necessary C:\Draftsight

  If this does not work, there is nothing that we will be able to suggest other than to contact the developer again. Change the ProgramData folder should not affect this type of problem and the only thing that is likely to affect the writing on the application folder data would be the length of your username, but even then I would feel that the application is something wrong in this case.

• I'm trying to download the trial version for Acrobat DC edit PDF files, but when download initializes, it gets to 11%, gets stuck, then gives the message "request from Web Get failed. I canceled, downloaded the installer again and got the same result.  I'

  I'm trying to download the trial version for Acrobat DC edit PDF files, but when download initializes, it gets to 11%, gets stuck, then gives the message "request from Web Get failed. I canceled, downloaded the installer again and got the same result.  I'm on a PC running Windows 8. Any suggestions?

  Hiddm93421458,

  Restart your system and then try again to install Acrobat Reader DC using this link Download Adobe Acrobat free trial | Acrobat Pro DC.

  Let me know if the problem persists.

  Kind regards

  Nicos

• While you take the cumulative incremental backup RMAN. Meanwhile users ke

  While you take the cumulative incremental backup RMAN.
  During this time users keep be updated, insert the corresponding schema.
  But my Client doesn't backup up-to-date. Is it possible to get the up-to-date backup?
  (If I have something wrong, sorry about that, that was my interview question)
  
  Thanks for all,
  Kind regards
  DB

  DB wrote:
  While you take the cumulative incremental backup RMAN.
  During this time users keep be updated, insert the corresponding schema.
  But my Client doesn't backup up-to-date. Is it possible to get the up-to-date backup?
  (If I have something wrong, sorry about that, that was my interview question)

  Thanks for all,
  Kind regards
  DB

  RMAN backup is not compatible and easy to follow on-line transactions. If it's something any purpose of migration suggest taking COLD backup.
  If it's no way suggested, then after your entire + cumulative backups, however, that data will be available in archives

• Changed the behavior of opening the files of the search results?

  I've recently updated to...

  Version: 3.0.0

  Build: 290423

  When I perform a search on my workspace, I get results based on the corresponding channel. {good}

  When I click on the line of a particular file in the search panel (results), open the file (A) and the examined string is highlighted. {good}

  Among the search results, are references to other files, the string has been found. {good}

  If I click on the line item for another file (file B), firm file A and file B takes its place in the main file editing panel. {bad}

  Previously, matches 'clicked' search results would be to open the file and add it to the control panel in a new Panel. With enough screen real estate I could compare the files. However, any file opened now since search results replaces any previous search file.

  I hope that this is not a bug, but rather just a preference that needs changed.

  I guess I can answer myself.

  In the general preferences > search. I deselected 'reuse of publishers to show matches.

  And now each file opens without "reuse space Editor".

• I noticed that the logo of my company is no longer included in the download page (for example, for files sent to clients). The custom logo is still a feature of the subscription to Adobe send?

  I noticed that the logo of my company is no longer included in the download page (for example, for files sent to clients). The custom logo is still a feature of the subscription to Adobe send?

  Hi Val (and David),

  Yes, custom branding will be absolutely included in Adobe send; We know that this is an important feature for many customers and don't dream of it remove! We plan to add this feature later this summer. Until the option of customization is available in Adobe send, you can keep using SendNow to do all your mail files and use the logo/personalization feature here. We'll let you know when you can brand your matches send Adobe, and is then going to be sure to make the transition to the new service - but it is perfectly fine to stick to SendNow so far here.

  I hope that helps to clarify things! Let me know if you need more info from us on this front.

  Best,

  Rebecca

• Query for the cumulative data

  HI friends,
  
  
  I need output like this.
  
  Frequency (%) Cumulative
  Frequency cumulative percentage
  4468 0.91 0.91 4468
  21092 4.31 25560 5.23
  57818 11.82 83378 17.05
  6274 1.28 89652 18.33
  
  I use Oracle 9i.
  My data of output like that and I need to write the query for 3 columns (for cent, the cumulative frequency and cumulative percentage)
  
  1: the formula for the percentage column data is (frequency/amount of cumulative frequency) * 100
  2: is the formula for the cumulative frequency column data (data of the cumulative frequency column of)
  3: is the formula for the cumulative percentage column data (data for the cumulative percentage column of)
  
  What should be the analytical function and how to write the query.
  
  Thank you
  Lony

  Hi, Lony,

  SUM is the function that adds several different line numbers:

  SELECT  frequency
  ,     percent
  ,     SUM (frequency) OVER (ORDER BY  x)     AS cumulative_frequency
  ,     SUM (percent)      OVER (ORDER BY  x)     AS cumulative_percent
  FROM     table_x
  ;
  

  In your data, not frequency = 4468 on the first line, and not the line with frequency = 21092 come from then? If Yes, then you must have another column (or expression) that determines what are words like 'next', 'first' and 'after' means. I called x in the above query.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data. Beespecially erase everything that makes a line come before or after the other.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

  It looks like you posted another copy of the same question: {message identifier: = 10271688} maybe it's not your fault; This site can be leafed through like that. No matter who's fault, mark the other thread as "Answered" immediately, so only look in one place to find answers, and other people won't waste their time, answering a question that is answered elsewhere.

• coil only the SQL result to a text file

  Hello
  
  Here's my script for getmetadata.sql. The sql script retrieves the metadata of objects for a schema specific to start from a specific date.
  
  Set serveroutput off
  the feeding off value
  fixed lines 200
  set of 2000 pages
  set verify off
  Set term on
  object_name format a30 column
  coil result_ddl.lst
  Select dbms_metadata.get_ddl (object_type, object_name). ';' from dba_objects where owner_name = '& schema_name' and to_date (to_char (created, 'DDMMYYYY'), 'DDMMYYYY') > = to_date ('& DDMMYYYY ', ' DDMMYYYY');
  
  In the hold with the result file I get the below lines too.
  
  "
  Enter the value of schema_name:CUSTOM
  Enter the date value: 08032011
  "
  
  I wish that this text does not do print and only the metadata script is created.
  Please guide.

  A - K wrote:
  Hello

  Here's my script for getmetadata.sql. The sql script retrieves the metadata of objects for a schema specific to start from a specific date.

  Set serveroutput off
  the feeding off value
  fixed lines 200
  set of 2000 pages
  set verify off
  Set term on
  object_name format a30 column
  coil result_ddl.lst
  Select dbms_metadata.get_ddl (object_type, object_name). ';' from dba_objects where owner_name = '& schema_name' and to_date (to_char (created, 'DDMMYYYY'), 'DDMMYYYY') > = to_date ('& DDMMYYYY ', ' DDMMYYYY');

  In the hold with the result file I get the below lines too.

  "
  Enter the value of schema_name:CUSTOM
  Enter the date value: 08032011
  "

  Is it really what you see? "Do not enter value for DDMMYYYY '?
  Be sure to view the results you get in fact from the code you post.

  I wish that this text does not do print and only the metadata script is created.

  Probably the best way is to explicitly set substritution variables before you start curling, like this:

  set serveroutput off
  set feed off
  set lines 200
  set pages 2000
  set verify off
  set term on
  column object_name format a30
  
  ACCEPT  schema_name       PROMPT "Please enter the schema name (case-sensitive, e.g. CUSTOM): "
  ACCEPT     ddmmyyyy       PROMPT "Please enter the minimum created date (DDMMYYY, e.g. 28022011): "
  
  spool result_ddl.lst
  
  select     dbms_metadata.get_ddl(object_type,object_name)
       ||     ';'
  from    dba_objects
  where      owner_name     ='&schema_name'
  and     created          >= to_date ('&DDMMYYYY', 'DDMMYYYY')
  ;
  
  ...
  

  Beware of round-trip conversions, such as

  to_date(to_char ...
  

  They are almost never necessary in Oracle. If you have a reason why you can't use just created, then it is almost certainly to get the same results without changing the types of data more efficiently (and less confusing).