Groups & subs

Similar Questions

• How can I rename or remove Tags in FireFox

  How to change (rename) or remove unused tags in ForeFox. So that's my main question.

  A related issue is that is it an add-on that will allow me a classify and categorize under (as a group, sub-group and so on) tags.

  Sorry about that...

  Well, the tags that are no longer used are removed from Firefox. You can not edit the tags by themselves, but rather to change the bookmarks with these tags. As the article says.

  Regarding the add-on, I really have no idea, but in case you don't know where to look, here's where: https://addons.mozilla.org/

• Outlook Express - repair/restoration of corrupted DBX files

  Hello

  I recently lost a number of local folders in my Outlook Express (OE) I found in the store DBX. However OE does not read/open them very probably because they are corrupt. It is apparently a common problem.

  I searched and found a few tools that claim to repair/recover corrupted DBX and I tried three demo versions. None of them were able to repair corrupt DBX files. One of the tools has been honest enough to admit that some files may be irremediably, and he provided a full scan of the drive that found a number of lost/deleted messages, some of which were originally in the records the of OE that I had lost. Although no no trouble so far, no cost using the versions demo.

  A number of experts suggested a tool called DBXPRESS claiming to recover the corrupted DBX files. Unfortunately, no demo version is available as proof of effectiveness before buy you.

  Are repairable corrupted DBX files, as claimed by the softwar ecompanies and if so, how, and with what software?
  As it is a common and potentially disastrous problem, not Microsoft should be persuaded to provide a radical solution to avoid a manual tedious backup process.

  All views / advice is much appreciated.

  Concerning

  Paul

  Outlook Express is an e-mail and news client supplied with Internet Explorer. Outlook Express is a different application from MS Outlook. The two programs do not share a common code base, but share a common architectural philosophy. Outlook Express uses the Windows address book to store contact information and integrates tightly with it. Microsoft Internet Mail and News was a freeware e-mail and news client and ancestor of Outlook Express.

  The executable file of Outlook Express, msimn.exe, is a remnant of the era Internet Mail and News. Internet Mail and News managed only plain text and rich text email ( RTF), lack of HTML e-mail message.

  Outlook Express has been subject to a number of problems which can corrupt its files database, especially when the database increases volume due to the increase in number of stored emails and during compaction of the database.

  The dbx file Corruption can occur due to these reasons:

  1 MSIMN has caused an IPF in module Msoe.dll.

  2 MSIMN caused a page fault in module Msoe.dll at address.

  3 outlook Express could not be started. It cannot be installed correctly. Make sure that your disk is not full or that you're not out of memory.

  4 outlook Express could not be started because Msoe.dll could not be initialized. Outlook Express is not installed properly.

  Outlook Express stores e-mail messages in the databases that have a .dbx file extension. Each folder in Outlook Express (same subfolders) has a database that are associated with; so if you have 20 folders you have twenty databases. The databases have the same name files so the Inbox folder has a database called Inbox.dbx.

  In these cases over corruption is probably in the file "Folders.dbx". It's the main index more of the entirety of the record Store and without it, Outlook Express is unable to do anything, in this case, the only solution is to delete the file corrupted in the storage folder. This will allow Outlook Express to start and to build a new "Folders.dbx" by re-indexing of all the DBX files it finds in the storage folder.

  For lost information, follow these steps:

  1. recreate your e-mail folders hierarchy by dragging files in place in the list of folders. Note that any folder that you've created to group sub files but that does not itself contain messages will not appear in the list of the files and must be recreated.

  2 re - download the list of groups of discussion of each news account.

  3 reset your subscribed discussion groups and re-download the messages.

  4. set options on IMAP folder synchronization and newsgroup.

  5. modify a message rule that moves or copies the messages in folders other than the Inbox.

  Here are the steps from which you can return the loss of information. And if your information not recovered again then it could be a serious problem. In this case, go for the recovery software to recover your data from dbx files. I can send you a link that can surely help you recover your lost data. Try this link:

  Good bye.

• Dividing into sub-groups Contacts

  How can I share my contacts into sub-groups, i.e. the Quilters and golfers

  You can do that through any account you synchronize your contacts with. If iCloud, sign in to your account iCloud on your computer and make your groups there.

• show sub in the second group header on each page without page break

  Hi all. I need to display each page sub header in the output pdf using rtf. I have two grouping region and category. I used the beginning: body and end: concept to repeat the header of each page. The region is repeated on each page, but I also want the category to repeat on each page without a page break. All of the suggestions. Thanks, Sushil

  Could you added the category value in the header row and the table row properties to repeat on each page... I sent a response to your e-mail. Take a look to see if the output is by expectations.

  Thank you
  Bipuser

• Force summary Sub totals on the same page as the repeating group

  Hello people,
  I have a group of left report where I show Patients and visits they have taken for each Department.
  I then did a Sub Total of the number of visits, the Patient took. I want to assure you that the subtotal shows
  upward on the same page as the data in the repeating group. I tried to use an anchor, but the report doesn't.
  It gives an error: REP 1213 - reference field column to a frequency lower than his group when I have the extendable chassis anchor foot sub total
  and 1814 REP report cannot be formatted. Object "Horizontal" can never fit into 'M_1' when I try to anchor the opposite effect.
  
  My goal is to show totals of Sub (Total) on the same page as the Patient and do not go to the next page. I have attached the dotted line and Total (label and field) in one frame.
  
  Release of the report:

  Patient ID     Patient Name              Department              Visit
  ======================================================================
  1001           Mary Poppins              Department 001              3
                                           Department 002              4
                                           Department 003              1
                                           -----------------------------
                                           Total                       8
                                           -----------------------------
  
  1002           Peter Pan                 Department 001              2
                                           Department 002              1
                                           Department 003              2
                                           -----------------------------
                                           Total                       5
                                           -----------------------------

  Thanks in advance!

  Pls set the property (page protect the patient details and framework that contains two sub total) to yes.

• Sorting and grouping and Sub total

  Hello

  I'm looking for some generic advice here, not necessarily a specific technical recommendation.

  We have a requirement for about 15 reports/forms. The reports would be the same layout using the same sets of data, with the exception that they be sorted, grouped and Sub totalled differently.

  Use Adobe Livecycle, can you design a form and then control the behavior of sorting, grouping and Sub totaling somewhat (perhaps via the parameters passed to its interface)? We do not need to allow a user on these differences control.

  I know that something like this is pretty simple in tools such as Crystal Reports, but is possible and practical by using Adobe Livecycle? We probably want to avoid a solution that uses Javascript excessively complex and plentiful.

  We try to use Adobe for something, so it's not really meant?

  Thank you!

  You can render PDF forms during execution using XML as input. If you want to avoid the JavaScript code in the form of coding, you can do all the calculations before generating the XML file. In this scenario, I assume that you have the server software to view the PDF with the dynamic XML data during execution.

  Another option could be written the Java Script in the case of calculated fields to sort / group / total values. Since all your reports use the same provision, it is not so difficult to write code. Propably if you check the PurchaseOrder.xdp form that comes with your samples as well as the installation Designer do you a basic idea on how to calculate the values that you add more lines to the shape.

  If you still have questions, you can always contact me or the team on this forum.

  Thank you

  Srini

• Problem with several sub-groups through case structure Enum: 'the VI isn't in a State compatible with this operation.

  Hello

  I'm using LabVIEW 8.0 and I'm trying to create a subgroup of experts which shows the façade of a subvi according to the choice made by the user via the menu drop down Enum.  I wired the Enum to a case structure and apply a coding identical to each structure of individual cases with the exception of course change the source of sub - vi.  However, you receive an error "The VI isn't in a State compatible with this operation."  I have managed to make a single sub - vi work within a subgroup of experts using a true/false case structure and the same exact coding.  However, now that I use an Enum box connected to a structure of the case, I get this error.  I enclose my diagram as well.  Could someone help me as to where it is that I am wrong?

  Thanks in advance!

  If your VI runs already, when you try to run it? Which returns the error you get.

  Check the State of VI before trying to run or make an error handling.

• Sub-group under the main do not repeat group

  Hi all
  
  I have the G2 where I DOCNUM_DESCRIPTION, and I've linked G3 where I can have one or more subgroup called REASON.
  
  Something like that
  
  G2 - DOCNUM_DESCRIPTION
  -A
  B
  -C
  G3 - REASON N ° 1
  X
  Y
  G3 - DESIGN 2
  X
  Y
  
  Native BI, I'm able to use the repeat of group function and detail but in rtf I repeating group, and it does not repeat itself. for each docnum_description, I only get the first reason coming out not all. How can I go about it?

  It is difficult for me to say logical without seeing the xml and rtf model.
  Can you please write me model and xml. I'm going to sed if I can help you or not.
  E-mail: [email protected]

• The sub-groups and access policies

  It seems that when I add a user to a subgroup, the access policies of the parent that user Group does not occur. However, the user is added to the parent company of the Group of users
  Can someone please verify this?
  
  Thank you

  Subgroups does not inherit the access policy of SuperGroup in IOM [ID 815373.1]

  Bug 5985475 :

  Define an event handler after insertion and attach it to Manager data access policies as an object so that when a group is assigned to an access policy, it checks and add its subgroups to the access policy (just the first level as it will recursively the same it keeps adding subgroups). Verify that you have the same event handler attached to the event after removal of the access policy, so that to delete the access of a group policy, all subgroups are also dismissed by the access policy

  Good luck!

• Essbase server URL of the SSP sub-folder of application groups can not see...

  I installed successfully hyperion EPMA 11.1.2.3 on windows server 2008 R2. I can connect to all the components hyperion essbase except succussfully. While trying to connect to essbase by EAS it gives me below error.

  "Error: 103: error unexpected Essbase 1051293 Error: 1051293: connection fails due to invalid credentials".

  In shared services, I do not see essbase cluster while the other components are visible.

  Please suggest...

  Thank you

  Try this stop essbase, rename the essbase.sec, essbase start-up, check the essbase.log to see if it registers properly with Shared Services.

  See you soon

  John

  http://john-goodwin.blogspot.com/.

• Kind for groups under construction according to the Source file name property

  Hello

  I use a script to load the 4 files in th data portals and later graphic some selected channels. The problem is that when I choose the files via a dialog box, the order mixes in the data portal. I wish the files to be sorted according to the name of the source file. Here's the script of loading:

  Dim i, intLoop, group b
  
  Call Data.Root.Clear)
  
  If FileDlgShow (DataReadPath, "TDMS files, *.tdms", "DataSelection", True) = "IDOk" then
  
    For i = 0 to UBound (FileDlgNameList)
  
  Call the DataFileLoad (FileDlgNameList (i), "TDMS", "Load") DataFilename, FileImportFilter, ImportAction
  
  Next
  
  End If

  Is there a way I can do?

  Thank you!

  Hi Saloutios,

  You can sort the table of FileDlgNameList using the BubbleSort algorithm, for example:

  Void BubbleSort (arr)
  
      Dim value, numEls
  
      Dim index
  
      Dim firstItem
  
      Dim indexLimit, lastSwap
  
      "take into account the optional arguments.
  
      numEls = UBound (arr)
  
      firstItem = LBound (arr)
  
      lastSwap = numEls
  
      Do
  
          indexLimit = lastSwap - 1
  
          lastSwap = 0
  
          For index = firstItem to indexLimit
  
              value = arr (index)
  
              If (value > arr (index + 1)) then
  
                  "If the elements are not in order, redeem them
  
                  (Index) ARR = arr (index + 1)
  
                  ARR (index + 1) = value
  
                  lastSwap = index
  
              End If
  
          Next
  
      LastSwap loop while that
  
  End Sub

  The input array is sorted after that you called this procedure.

  Hope this helps

  Winfried

• move the cluster for sub vi

  Hello

  I want to spend a cluster that can change its content to one under VI. The cluster does not change by program, but during programming, that is, I could add or remove items in the / cluster. Using direct wire or local variables I would have to change each sub VI that uses the cluster updated the. I also tried the typedefs, but I met the same problem.

  At the same time the Subvi should be able to update the cluster I spent.

  In C++, I use classes like struct (equivalent to the cluster of LV) and pass a pointer to a class object to a function. Within the function, I choose the members of the class I want to use inside this function. If I change the class structure, the functions of the Word are not affected (of couse only as long that I remove irrelevant of class members of the called function).

  Example (from C++):

  settings * param;  'settings' is a class that I use to group variables

  doSomethingUseful (param);

  / * the doSomethingUseful function uses the pointer to parameter and accesses the members of

  Param-> variable1

  Param-> variable2

  ...

  Hereby, I can change the values of variables stored in the param object

  */

  Best,

  Max

  
  

• Group execute Trigger on 2 DMMs

  Hello

  I'm trying to use software trigger to trigger two Agilent 34401 DMM "simultaneously".  I found this article from 2007:

  http://forums.NI.com/T5/LabVIEW/how-do-I-use-visa-to-perform-get-Group-execute-trigger-to-three/m-p/...

  However, the answer is less useful, because it does not address the issue.

  What I'm trying to use is the function GPIB 488.2 Trigger List (such as recommended by NEITHER).  However, generating a list by program turns out a touch... interesting.

  Given that the selection of the device is made using aliases VISA, I am trying to use a property node to retrieve the GPIB address.  As a temporary trial, I use a VI with the attached excerpt included code.  With DMM configured in GPIB0::6:INSTR and GPIB0::22:INSTR (but try this at home with no real hardware attached), my probe shows all the values of property as 0.

  I tried the wrong approach?  Try this at the office with the DMM attached would produce a different result?  (I'll try again tomorrow anyway.)

  All comments would be appreciated.

  Kind regards

  Geoff

  Try to work with the connected digital multimeters (and turned on), the primary address property returns exactly what I expect and the code snippet works - apparently - perfectly.

  I had been struggling with getting the DMM to trigger and retrieve the measurements of the DMM.  I tried to use the 'Trigger' function, but it doesn't seem to work without additional steps to ensure that the right listeners are selected - so the function "basic list".  I also had problems of data recovery - partially because he was (probably) not trigger, but especially because I wasn't not wait long enough so that all samples must be collected.

  For more information, this system has (by default, but configurable) 10 samples being played at intervals of 0.1 s, so you have to wait a second.  I could just have increased the timeout, but it's a bit messy.  Otherwise, I guess I could loop waiting for signals to be ready, but the driver for this DMM does not seem to include a query function.

  The screw with a symbol of the timer on them simply contain a call to Wait (ms).  It's cleaner (in my opinion) that put in a frame.  Now that I have the work function, I also replaced the frame function timestamp and relaxation with a sub - VI.

  Kind regards

  Geoff

• Several panels of Sub to call same VI

  Hello

  I would like to create a test sequencer allows to test on several device at the same time.

  I just created a VI that has 2 panels sub to call the sequencer.vi, both panels void able to run the test in parallel and asynchronously.

  Now my problem is, if my VI has test on the device 50 at the same time, develop the block diagram is the only way can do?

  Someone at - it better idea to come easier maintainbility and sustainability?

  Here, I have attached my VI.

  Thank you.

  It is possible, just create references to the sub-panels, group them into a table, and use a loop for.