Similar Questions

• LaserJet M1136 MFP: Find the MAC or the IP address of the printer

  Hi, I tried to find the IP address or MAC address of my printer of office for days without result. The printer is connected via USB to a computer on the network and others connect to it like a computer on the network.

  I need to add the printer to a Mac laptop, and I need the IP address to it. I tried the config/print test pages but they do not have the information, I looked in the Ports tab in the printer properties, but port poster not the IP address, on the contrary, it didn't USB001

  I also used 'arp - a' command in CMD to get a list of attached devices, I have the list of IP and MAC addresses, but I don't know what is the printer. So I tried to watch the MAC address and could not find anyone.

  Can you help me?

  Hello

  What the below URL :-).

  https://support.Apple.com/en-in/HT3049

• WGA600N and change the MAC addresses wireless! Grrr!

  The exec summary: why in fire the wireless MAC address changes with each power cycle? It can be stopped?

  The rest of the story: just got my adapter and had problems he connect my Linksys WRT110. Discovered the hard way that the MAC address on the label is the * wired * address, not the wireless MAC address. Has been able to configure the adapter and use the admin software to watch the Mac wireless. I plugged this address into my WRT110 that has the MAC address filtering turned on. Smart card, life was good.

  Unplug the adapter and it moved to its final location. Plugged in, no connection. Received a computer laptop and connected to the card, and this amazed my eyes see but the wireless MAC address has changed with the power cycle! Unplugged the card even once, waited a few minutes, then plugged in. The wireless MAC address verified again and of course, once again changed.  When did it become an acceptable practice?

  It is of course difficult to use the card in an environment with MAC address filtering turned on. Is it possible to prevent this address change?

  Thank you

  Found the answer - the wireless adapter takes the MAC address of the device, it is well plugged. Interesting.

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• Graphics card Quadro 4000, installed in the Mac Pro, but CS5.5.2 will not enable playback of mercury. I ' watched v

  Graphics card Quadro 4000, installed in the Mac Pro, but CS5.5.2 will not enable playback of mercury. I ' v looked but can't find any information. Install the cuda driver 4 - 2.2.10 said if Nvidia running OS 10.7.4 driver install is not necessary. In CS5.5.2, the parameters of the project, general, video playback and rendering, the only option is only the MPE software and it is grayed out. I tried to restart the computer.

  as a side note when I open PP I get an error - video filter missing AE > ADBE SubspaceStablizer missing - I don't know what this means, but do not think that it has nothing to do with the issue of mercury reading.

  I also downloaded driver Nvidia - Quadro ODE graphics driver. Under Nvidia drivers downloads, it gives several options for the 4000 Quardo for Mac, but the only one that will download is the graphics driver ODE.

  IM new to this so I really appreciate your help.

  Thanks - John

  the last two posts fixed the issue of the mercury playback engine not activated GPU accelerator. I hope this helps someone else. Thanks for all the help I received.

• Unlock the Mac with Apple iWatch

  I have a MacBook to 2015 and iWatch. The Mac is on MacOS Sierra and the iWatch is on version 3, so both devices are on the latest version of the software. I also have an iPhone on the latest IOS that the watch is twinned with 6. All devices are on the same iCloud account.

  I tried everything I can do the iWatch unlock the Mac. I'm getting very fed upwards with it's complicated. I spent 2 step 2-factor authentication audit and I read each thread and an article I can find, but I can't get it to work. It seems I'm not the only one. I thought that Apple was easy to work, but with each update and the new feature which is launched, it becomes more complicated.

  I spent hours trying to work and decided that he would save me more type my password every time I have unlock the mac it takes to implement this feature from time to time saving!

  In any case, after trying everything I always get the message "your Mac was unable to communicate with your Apple Watch."

  

  If anyone can help I would really appreciate. Otherwise, I will ditch the idea to get this feature to work.

  Thank you Apple lovers.

  Try these similar thematic subjects - Impossible to unlock MacBook Pro with Apple Watch OR your Mac was unable to communicate with your Apple Watch OR your Mac was unable to communicate with your Apple Watch

  Allow automatic on your Mac and Apple Watch unlock OR similar link

• Apple Watch will not unlock MacBook

  I have a Macbook 2016 on MacOS, iPhone 6 more current iOS10 of execution, first-generation Apple Watch running Watch OS3 and two steps on authentication.  As shown in the screenshot below, I was able to check the possibility of allowing my Apple Watch unlock my Mac.  He looked the watch and then checked.  I did this several times, however, it will not unlock the Mac.  New features to copy and paste between devices, etc seem to work well, but I can't get the unlocking function to work.

  

  Hello wow321,

  Thanks for asking for help with unlocking you Macbook with your Apple Watch here in Apple Support communities. We commend you for updates latest and your devices. Also, please check the things you already checked. I will do my best help to offer things to get this working as expected.

  I have personally reviewed article for help to unlock your Mac with your Apple Watch which is here: automatically unlock your Mac with your Apple Watch. The first thing we want to do is to check that everything is correctly configured through this step by step article once more.

  A confusing area for some people is the type of security on their Apple ID. The State of necessity who need a Apple ID to use instead of the two-step verification two factor authentication. Please check the type of security on your Apple ID using this help article that deals with two factor authentication: authentication two factor for Apple IDand this second article of help dealing with two-step verification: frequently asked questions about two steps checking of Apple ID.

  If any snippet and you still have questions, I recommend you make a backup of all your data on your iPhone to make sure that everything is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Then, try to turn the iPhone, with the Apple Watch is paired both devices Mac, power off and on. Sometimes, that's all that is needed for connections reset and everything working properly again.

  If you're still having problems, please cancel the twinning of your Apple Watch from your iPhone by following the steps described here: pairing your Apple Watch and iPhone. Reset the network settings on your iPhone under settings > general > reset > reset network settings. This will remove not your personal information (contacts, photos, calendar of events, etc.), but it will remove networks WiFi recorded and passwords, as well as all the APN or previously used VPN settings and Bluetooth devices connected. After the reset of the iPhone, pair your Apple Watch with your iPhone again and check if the Apple Watch can then unlock your Mac.

  Thanks again for asking for help with this here in Apple Support communities. Have a great rest of your day.

• Can not unlock Watch

  Just bought watch today.  Updated watch OS 2.1 and can not unlock look.  It says 'Device locked Unlock iPhone to use Apple Watch.'  My phone is not locked.  I never put a password on the watch.  I restarted the watch, it powered down and back up to anything will do.  Same thing with the phone.  Bluetooth of the phone is turned on and connected to the watch. Any suggestion would be appreciated.

  Hello

  Try to press the sleep/wake button on your iPhone to lock - and then unlock your iPhone by pressing the Home button and entering your password or contact ID.

  If this does not help, it can help to restart your iPhone and your watch in this way:

  -Put the two unit set off first;

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -Restart your iPhone before restarting your watch;

  -To turn back on your watch: press and hold the side button until you see the Apple logo.

• I want to install windows os(not genuine) in the mac, I use mac air beginning 15, 4 GB of ram, 128ssd.     I want to play counter strike (overall offensive) in the windows operating system.     is 4 GB of ram enough or it takes 8 GB of ram.

  in fact, I want to install windows os (not authentic) because I'm fond of counter strike

  so, mac support this game?

  or it takes 8 GB ram to play counter strike?

  operating system windows (not authentic) will cause no effect on mac?

  If I install the windows on mac operating system, I will award 58 GB in the windows operating system and remains to mac, goes no problem in the future, due to the windows operating system?

  ALSO POINT OUT THE ADVANTAGES AND DISADVANTAGES OF INSTALLING WINDOWS ON A MAC.

  operating system Windows (not authentic)

  This means that you ask for assistance on the use of a pirate copy of Windows?

  If you install Windows, you have the advantage of being able to run Windows and the inconvenience of having to deal with all the viruses and stuff for which Windows systems are prone.

  Why not just buy the Mac version? It seems relatively inexpensive: http://store.steampowered.com/app/730/

• Home of the iTunes sharing works on Mac, not on iOS

  Hello

  I'm trying to use home sharing to play music from the iTunes library on my Mac on my iOS devices, but it does not work. The devices that I use are a Mac Mini Sierra, who has my iTunes library, a 5 c with iOS 10.0.2, iPhone an iPad 2 running iOS 9.3.5 and a MacBook Pro 2011 Sierra running. I have iTunes running on the Mac Mini, with home sharing enabled. The MacBook Pro, I can see and play the shared library. I am connected to the same on all devices iCloud account, and I am connected to home sharing within the parameters of the music on the two devices with the same account. All devices are connected to the same WIFI network to a router TP-Link Archer C7. On the iPhone with iOS 10, home sharing must be one of my options when you click the library, but it is not. On the iPad with iOS 9.3.5, home sharing should appear in the dropdown at the top of the screen my music, but it does not appear. I tried to turn home sharing and turn it back on to the host computer, turning home sharing and turn it back on client devices, restart the host computer and restart client iOS devices. In addition, I tried this on a 4th generation iPod Touch (does not work) and MacBook Air my wife (works). Why is it not this work for my iOS devices?

  I thought about it. In addition to activating iTunes home sharing preferences on the host computer, you must also go to file > home sharing > turn on home sharing and enter your iTunes account information. I doesn't make sense to me that you would have to enable home sharing on two different places to do work with different types of devices, and there is no explanation for this data in the documentation I've seen.

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• Which photos stay permanently in my library of Photos on my Mac, not only in the photo stream?

  I just upgraded to El Capitan 10.11.6 and now tries to use the new Photos app, version 1.5. I have not activated icloud photo library on the computer or the iPhone or iPad and do not want. I would like to know what pictures, cases, will actually stay in the library of Photos on the hard drive of my computer and only be in photo stream and how to make sure than I think I am importing actually stayed there.  I took some pictures with my camera and imported using an SD card, so I guess they will stay there. I also a few iPhoto events that have been converted into pictures when I first opened my latest iPhoto photo library, so I guess they will stay there. But when I receive an email with a picture and try to save it in the mail for the pictures, it seems that in my photos and not constantly flow in the Photos. Same thing happens when I drag a photo in the Photos of the office - it doesn't seem to be there permanently, in the photo stream. I really miss the Camera Roll function that I have on my iPhone and iPad running OS 9.3.2. Anything in my film I know is permanently on the device. I fear that eventually some of the pictures I think that are permanently in the pictures library on the Mac will disappear just when my Photostream deletes. The only way I seem to be able to tell which photos are really, that he must pretend to remove one in the folder "Photos" at the top of the list in the sidebar (the one that displays the photos in Moments, etc.) and then a window pops up asking you if I want to delete the photo or if I want to delete the picture from my photo stream. To summarize, my questions are once again: How can I know which photos will stay permanently in my library of Photos on my Mac and not just be in the photo stream? And how do I get the photos that I drag or that you import pictures to remain permanently in the library of Photos on my Mac? Thanks for any help you can give.

  But when I receive an email with a picture and try to save it in the mail for the pictures, it seems that in my photos and not constantly flow in the Photos.

  How you save for the email to Photos?

  If you ctrl - click the attachment of email and use "of exporting Photos", the photo will be imported to the Photos.

  Saving Photos from other applications is a little annoying, because the pictures do not appear in the album "last import. But you will see them in moments.  Only, you nned to scroll the way back, if the date of the photo capture is old. The photos will appear in the moment for the correct capture date.  If you see the pictures in my workflow so hoto, select them, ctrl-click and use ' Show in time.

  . I really miss the Camera Roll function that I have on my iPhone and iPad running OS 9.3.2. Anything in my film I know is permanently on the device.

  On Photos for Mac was added permanently to your library of Photos that you see in Photos with time display, Collections, the years.

  And how do I get the photos that I drag or that you import pictures to remain permanently in the library of Photos on my Mac? Thanks for any help you can give.

  The pictures that you have imported this way must have been added to your photo library, or you would not see them in my photo stream.  The photo stream shows all the photos that you have recently added to the library, to transfer them to other devices.

  You will find all the photos in your photo stream in Moments?  If this is not the case, there is a corruption in your library of Photos, then post back.

• OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

  I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

  The Mac has no network to the internet via a port USB, WHY NOT?

  Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

• The printer receives do not all data. It is caused by the MAC address filtering.

  How can I solve this problem.

  The printer attempted to join the network but does not receive any data.  This may be caused by the MAC address filtering. If MAC address filtering is enabled and you want to keep enabled, add the MAC address of your printer in the list of devices allowed for your wireless access point or router before continuing.

  HP Officejet 4500 - G510n wireless all-in-one printer

  Not at all use MAC filtering.  Make sure it is off in your router.

• The version of iPhoto installed on the Mac is not compatible with OS X Yosemite. How can I find the compatible version?

  When I try to open iPhoto, I get this message

  The version of iPhoto installed on the Mac is not compatible with OS X Yosemite. Download the latest version from the Mac App Store for free.

  When I search the latest version of iPhoto in App store, I get nothing. How to make compatible version of iPhoto for my OS X Yosemite.

  Mac OS X 10.10.3 and newer include Photos, which is designed as a replacement for iPhoto. If you want to go on the use of iPhoto in addition to or instead of switch to Photos, click here and try following the instructions; you will only be able to do if you got before where associated with iPhoto on the Mac App store.

  (141623)