GTX 285, Fermi 470, 480 playback engine (MPE) Mercury.

Similar Questions

• EVGA GTX 480 and Mercury playback engine

  I think that my first Pro CS 5.5 supports the GTX 480, BUT the Mercury playback engine is only the software.  Any ideas on how to get hardware acceleration work?  If it is not supported by Adobe is there a Hack to replace the software only.  Thanks for the help.

  Hello

  Make sure that you have the video card is entered correctly.  It should be GeForce GTX 480 is case-sensitive.

  Also, try to put it on the first line of the file cuda_supported_cards.txt.

  I assume that you are running Windows 7.  If you are, follow these steps:

  1. which Start in the lower left corner of Windows 7 icon.

  2. then click on all programs , and then click the Accessories folder.

  3. look in the Accessories folder for Notepad and RIGHT click on Notepad

  4 the left, click on run as administrator

  5. When Notepad opens, click on file , then Open

  6. go to the folder Program Adobe Adobe first Pro CS5.5

  7. find the file: cuda_supported_cards.txt then click on it to select the file, then click Open

  9. you will see a list of maps, add your video card to the list like this GeForce GTX 480

  10. click on file , then click Save.  Then quit Notepad.

  Now start first CS5.5 and you should be able to put it to GPU acceleration.

  Dave

• GTX 480 vs GTX 285

  Regarding video cards that I don't know, says the Adobe site on the system requirements:

  Supported NVIDIA graphics cards for GPU acceleration:

  GeForce GTX 285 (Windows and Mac OS)

  In my opinion, that they list cards can use the maximum error allowed for better display.

  This is one I can afford.  However I noticed that some who have best performance machines use the 480. Why?

  Wouldn't better not get this card and change the cuda_supported_cards.txt file?  I'd get as good, or even better performance than the 285?

  Also the amount of memory in the card would make a difference?

  1 correct.

  2 correct. Fix. Fix.

  Maybe in a year and a half the 480/470 will be much faster that the 285 can never be, due to the hearts, the memory bus and allowed it.

  I wouldn't worry about the 'hack' as being unsupported by Adobe. Often, you get better support here, as some support person according to the India, which has never used the program and the only bed aloud instruction leaflets.

• Active not material Mercury playback engine

  I am a novice first pro CS5 user (Beginner) and bought the next video card:

  MSI N470GTX Twin Frozr II NVIDIA GeForce GTX 470 (Fermi) 1280 MB 320 - bit GDDR5.  The 470 is on the compatibility list.

  When I opened the Premier and go on:

  'project' / 'settings of the project' / 'general' - and go to the bottom of the menu, the selection for the equipment / engine software mercury playback engine is grayed out, and it is in the mode of selection of software.  I can't use the drop down menu to change equipment.  I've updated my NVIDIA driver directly tonight too and that did not help.  Is there something I need to add (software) or something I need to change to make it work?  I read a post where they said I needed to load the CUDA SDK to work (from NVIDIA).  I forget something basic here to make this work?

  Thanks in advance...

  That should fix it. Read here: Premiere Pro CS5 (5.0.2) update: bug fixes and support CUDA "Premiere Pro workspace .

  Premiere Pro CS5 (5.0.2) for Windows also supports the following graphics cards speed up using CUDA on GPU technology: GTX 470, Quadro 4000 and Quadro 5000.

  Yes, it's for 5.0.2 but which is included in 5.0.3 (current) as well. Your card is "official." just need to the appropriate platform.

• Mercury playback engine

  Hello, I just bought first Pro CS 6 and the Mercury playback engine does not work. I also first pro CS 5 and the Mercury playback engine works perfectly. I have a Nvidia GTX 285 graphics card. How to operate also in Version CS6 first pro?

  The standard answer n ° 1: update your graphics driver.

  Mylenium

• Problem with the Mercury playback engine?

  I have am using a the Gtx 560 TI Overclock edition. My problem is, when I turn on CS5.5, I can't choose to use material made video and playback, its gray (its software said on black) so I can't change it at all, im afraid all this time ive been using HD 2000 my i5-2400 for video editing. I don't have still done no editing hardcore, ripping the moment wasn't long but usually my video were only 5 6mins long and export was not bad at all too. So my Gtx works or it uses the video card in my procie? I tried the Hack when you open a file in adobe Premier to upgrade your GPU on the list, but did not know if it works. I typed in Geforece GTX 560 TI with OC and without did not work for end of mercury is still greyed out. I download the CUDA drivers now who could help.

  HD 2000? N °

  I use a GTX 560 TI, all good here. He added the map to the list and run the gpu sniffer.exe.

  Your GPU list should look like this:

  GeForce GTX 285

  GeForce GTX 470

  GeForce GTX 560 Ti

  GeForce GTX 570

  GeForce GTX 580... and so on.

• Mercury Playback Engine active GPU is gray. Why?

  Hello

  I use first Pro CS5 with a Mac Pro Quad Core x 2 CPU, 16 GB of RAM and EVGA GTX 285 nVidea graphics card and I just noticed THE project / RENDERING AND PLAYBACK VIDEO / RENDERER: Mercury Playback Engine software only (selected). It is also greayed out and I can't change it to GPU enabled on this page or any other project. Why? Is there something I need to do?

  I have supported all the hardware and yet I do not get full use of the Mercury playback engine.

  Can anyone help please?

  See you soon

  Download the latest drivers nVidia GPU, as well as the drivers CUDA.

• CUDA Mercury playback engine in Premiere Pro CS6 but not show in first Pro CC. Why is this?

  G ' Day of the Australia again.

  I've been using Premiere Pro CS6, and during this time the Mercury Playback Engine GPU acceleration of the reduction (CUDA) appears as an option for the rendering engine.

  But now that I've updated for first Pro CC, the rendering engine does not appear, only the Mercury Playback Engine software.

  My computer is

  Windows 7 Professional

  Service Pack 1

  Processor Intel R COre TMi7

  24 GB RAM

  64-bit operating system

  Graphics card

  NVIDIA GeForce GTX 570

  Could someone help me please get the CUDA converter to appear with first Pro CC.

  Thanks a lot for your help.

  The following text appears when I run the Premiere Pro Cs6

  

  Adobe switched to a DLL that universally supports all GPU 'qualified '.  You upgrade the drivers for that?

• With the help of NVIDIA GTX970, it will allow acceleration GPU rendering and playback instead of Mercury playback engine software only option?

  I want to buy GTX 970 NVIDIA,

  With the help of NVIDIA GTX970, it will allow acceleration GPU rendering and playback instead of Mercury playback engine software only option?

  Yes.

• Missing Mercury Playback Engine GPU acceleration after computer crash. How can I get it back

  Hi, I am missing the Mercury Playback Engine GPU acceleration after computer crash. How can I get it back?  I got my husband to update my graphics driver.  How what should I do?  When I check the project settings > general, he still has the field of software reading Mercuy only in gray.

  Adobe Premiere CC CC 2014 CS6 CS5.5 CS5 video cards with CUDA Mercury Playback unlock MPE Hack David Knarr

• Mercury CUDA does not allow when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks installed

  Use the same configuration from CS5 with mercury CUDA works perfectly. After that the recent upgrade of the OS X 10.9 mercury CUDA is no longer available and the only lets me run with either OpenGL or software. IM using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the program GPUSniffer in the latest files from Premiere Pro 7.1.0. The LAST line made me hugoverolariviere because it first on the list of supported map in the file 'cuda_supported_cards.txt '. Someone else has seen this?

  -OpenGL Info-

  Provider: NVIDIA Corporation

  Rendering engine: NVIDIA GeForce GTX 285 engine OpenGL

  The OpenGL Version: 2.1 NVIDIA - 8.18.27 310.40.05f01

  GLSL Version: 1.20

  Monitors: 1

  Monitor properties 0-

  Dimensions: (0, 0, 1920, 1080)

  Texture size max: 8192

  Supports the power of two: 1

  444 shaders: 1

  422 shaders: 1

  Shaders 420: 1

  -Calculation GPU info-

  Found 1 devices that support for GPU Computing.

  Peripheral OpenCL - 0

  Name: GeForce GTX 285

  Provider: NVIDIA (Apple platform)

  Capacity: 1.2

  Driver: 1

  Total video memory: 1024 MB

  * Is not enabled by default because it does not match the list named cards.

  Since it worked before mavricks and does not work after... the mavericks that leaves a conclusion... mavericks

  Go to http://forums.adobe.com/community/premiere , and the area just below to ask a Question, typeRegeditdans

  Mavericks

  You can now read all the previous discussions on this topic... do not forget to click on see more results at the bottom of the initial list, if the initial list does not answer your question

  I am Windows so do not favorite the message, but at least a message thread has a possible solution for SOME problems of mavericks

• Mercury Playback Engine GPU is not available

  I have read through the forum messages and have not found a solution, so I apologize if there is only a solution posted elsewhere.

  I have an iMac 27 "(fin 2012) with NVIDIA GeForce GTX 680MX running Mac OS graphics card 10.8.5."

  I use Adobe first Pro CS6.0.3, and when I upgraded my OS to 10.9 Maverick, I started to experience several problems, including:

  1. The dreaded spinning beachball and "first meets not.»
  2. "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA) which is not available on your system. Mercury Playback Engine Software only will be used.
  3. Video files - I think they were all. MOV - became "crushed" to the top of the program screen (film picked up only about 1/3 of the window the program monitor).

  After a long conversation with the Support from Adobe, it stated that the update to 10.9 Maverick was the problem, then i:

  1. Updated for first 6.0.5 but who has not fixed any issues.
  2. Logged in as 'Root', who worked for a while but I got 3 'first encountered problem and must close.'
  3. Remove preferences, repaired permissions, database troubleshooting practices, etc., but problems persist.
     

  No help.

  Finally I restored my computer from a Time Machine backup to a day before the OS 10.9 update and this seemed to resolve all issues. So I was for Mac 10.8.5 and first 6.0.3.

  But the. MOV-compressed-in-the-program-monitor problem began to surface again (see photo below).

  

  So I updated for first to 6.0.5 (but not my OS - it is still 10.8.5), and the "Mercury playback engine" error is returned.

  

  And the. MOV files are always compressed in the program monitor. I have a project that I finished in 6.0.3 but is now messed up in 6.0.5.

  Help please. Is the only solution without downgrading to first 6.0.3 and if so, should I do a clean install of the program of the DVD?

  Thank you

  RW Harris, Director of training

  Express oil change & tire engineers

  Birmingham, AL

  NVidia Windows Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a file 'supported cards' - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

• When the latest EVGA video card will be approved for Mercury Playback Engine GPU acceleration?

  I built my system of video editing, Windows 7 Ultimate, EVGA GeForce GTX 570 graphics card and motherboard ASUS Rampage III Extreme i7 920 Mhz, 24 GB of RAM. I decided to update my video card for EVGA 660Ti with many more CUDA processors and 3 GB of memory, but when I made the video I got this message "the project last used with Mercury Playback Engine acceleration GPU, which is not available on this system." Software playback engine Mercury only will be used. "and it seemed that the rendering is slower. Even if the newer video cards EVGA have more memory and processor and power more CUDA cores and best score on Intex experience Windows, Adobe does not approve them and say that they use the GPU Merecury Playback Engine acceleration. Why? Quadro cards are much more expensive have less memory, less CUDA cores but are rated higher by Adobe for creating and rendering, why is - this? What gives? Why EVGA which seem more powerful and cheaper cards rated lower than cards Quadro? This will never change?

  These cards just have not been tested yet, is all.  But if you go in the program of the PP folder and just delete the cuda_supported_cards.txt file, you should be good.

• Impossible to activate the Mercury Playback Engine GPU acceleration

  Cannot activate the Mercury Playback Engine GPU acceleration.

  Just bought an Asus GeForce GTX 560 it just so that I can use the graphics acceleration on Adobe first Pro CS5.

  Followed every step of most of the tutorials like this great http://Vimeo.com/13440307 and still the Mercury Playback Engine GPU acceleration option is always dimmed. 

  

  http://www.urbanistgame.com/wp-content/uploads/2012/06/CUDA-supported.gif Add the last two lines that wasn't sure if it took "Ti", he came "supported" in cmd after the 'Ti', so I guess that's what she held.

  You can see in bold that I put the option Multi-display/mixed-accelerating GPU 'compatibility performance Mode '.

  Splash screen confirms Version 5.0.3 (update to enable the Mercury Playback Engine GPU acceleration).

  After all that 'Make and video playback' option is always used in output.

  Any ideas? Information System

  

  List installed programs from Nvidia

  I hope someone can help.

  PROBLEM SOLVED.

  I have reinstalled CS5 on the bookdisk and it worked fine. Past 9 hours trying everything else sound was really the only thing left and the last thing I wanted to do.

  Results:

  Rendering of a clip 32 min with Gaussian blur effect

  Before CUDA, it took 4 hours and thus my move to buy a card CUDA.

  After 23mins CUDA! using the encoder

  Question:

  I noticed that the GPU is not pointing out that a lot still. Operating only at 30% of the activity?

• GTX 570 and first CS 5.5: engine reading Mercury does not seem to work

  Hello world

  I get choppy playback and a red bar on first CS5.5 whenever I apply to a clip of one of these effects: no effect on the deformation, the noise alpha folder or the Magic Bullet Looks 2.

  The sequence is an AVCHD 1080/24 p, first preset and multimedia files are AVCHD to a GH2 (1080/24 p to 24 Mbps).

  My system is more or less like this:

  • Motherboard: Gigabyte Z68X-UD4-B3
  • Processor: Core i7 2600 k
  • RAM: 16 GB DDR3 Kingston HyperX 1600
  • Graphics card: Gigabyte GTX 570 1280 MB (it comes factory overclocked)
  • (Only a screen 1920 * 1080 is attached to the graphics card right now)
  • Hard drives: 3 Western Digital Caviar Black 1 TB set out the following:

  OS c:, Program Files, swap file

  g: the project files and media

  h: Previews

  And now the symptoms: sequence In an AVCHD 1080/24 p with clips AVCHD 24Mbps, all in the same video track, whenever I have applied an effect of alpha folder, Magic Bullet Looks, or noise of deformation (and probably no hardware acceleration effect) render bar changes from yellow to red and I get choppy playback unless I set the resolution of reading to 1/2. If I change the playback engine Mercury adjustment of the hardware to the software as usual. So I think that the GTX 570 does not work with first CS5.5 for some reason any. In this thread (http://forums.adobe.com/message/3736541) some people had even complained. Also feels quite slow. For example, a clip of 30 seconds with an applied effect of Magic Bullet Looks takes 150 seconds to pass from red to green.

  I tried to completely uninstall the nvidia drivers and installing the last to no effect. I'm kind of frustrated, I chose this system and CS5.5, thinking that it was going to be a smooth experience and I'm a little disappointed right now. If all goes well, there will be a fix for this. Or maybe I am doing something wrong myself.

  Thank you in advance and sorry to bother you with this.

  See you soon.

  Diego

  It depends on your memory and the degree to which pass you the RA, EN, AE and PS and others. With 24 GB, it is not really important. With 12 GB but switching limited and the use of AVCHD material, it is not terribly important. Material Red4K and no more than 12 GB it can pay to move the pagefile to H.

  Therefore, there is no clear answer. It depends on your workflow, your source, your memory material.