Location of new mods of ram in the 4 slots?

Similar Questions

• I have 8 GB of Ram in the 1st slot DIMM... can I add another in 2nd slot?

  I ordered a HP Evny 310xt 700 with windows 8.1

  I opted to have 8ram in a Dimm location instead of 4ram in two slots...

  I had hoped to get another 8ram module into slot 2 when my pc gets... so I'll have 16 RAM, but I have a hard time to know where I can get the original parts of HP. I haven't tried th parts store to HP no chance. I don't want to throw the 8ram far which is delivered with the machine and two others... I want to keep the 8ram that comes with it... and add a unique 8ram.

  "The part number for my module memory 8 GB is part number 698651-154"

  do I have to use the exact same part of the manufacturer?

  Thank you very much in advance

  Hello

  Yes, you can add 1 piece of 8 GB to the second slot to make 16 GB as shown:

  http://support.HP.com/us-en/document/c04344813

  You can use the other RAM with the SAME characteristics but using the same RAM is much better in terms of peace of mind. HP RAM may be slightly more expensive.

  Kind regards.

• I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  This was after the 3 beep error and I couldn't restart the Mac with one of the 2 GB of Ram into the lower slot.

  Is there a way to test if the top housing is faulty or just dirty?

  Thank you

  svchild wrote:

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  Yes, the MBP will work with a single module of RAM installed, but there will be a slight performance decrease.  A MBP 2012 will accept a module of 8 GB RAM.

  Is there a way to test if the top housing is faulty or just dirty?

  Install each RAM module individually in each slot, leaving the other empty.  If the two RAM modules work in a slot and not the other, the slot is faulty.  Sometimes the adjustment screw can resuscitate the slot.  If this is not the case, make an appointment at an Apple store for a FREE evaluation.

  Ciao.

• Tecra S3 - cannot use the new RAM modules in the B slot

  Hi all

  I just bought two RAM modules of 1 GB to replace my old 512 MB one. This, as far as I know, is the maximum allowed by my Toshiba Tecra S3 (PTS30E-01000QSP).

  When I put a module in A slot, the machine works perfectly; If I place a second in location B, the computer tries to start but, at a time given, it freezes just (no activity of the HARD drive or changes on the screen) and the fun begins racing on as if some process crashes in the CPU to heat that make it up. At this point, I was always afraid that the heat can damage the computer and be turned off by pressing the on/off switch, so I can't tell if the problem is solved simply waiting.

  I swapped the two modules on A slot and the two work well when they are the only one on the machine. Pretty funny if I place (as is the case now) has the old 512 MB in the location B as well as a single module of 1 GB in slot, it works!

  My BIOS has been upgraded to the last, that I could find in these same pages (version 3.20 if I'm not mistaken), but it made no difference. If I enter the page of the BIOS when the two 1 GB modules are present, the BIOS recognizes that they are there. This behavior occurs when I try to start Windows or Linux.
  Honestly, I'm puzzled. Someone has an idea what can happen and how I could place the two modules on my machine?

  Thank you very much and sorry for the long post

  O.

  Hello

  The modules you purchased exactly for your Tecra S3? Maybe that they are not compatible with the laptop and it hangs after a few minutes.

  Normally, the Tecra S3 can handle up to 2 GB and that means 1 GB in each slot. For modules of Toshiba part number is PA3411U-1M1G.

  In my opinion you should try it with other modules with original 512 MB module everything works so I guess your new RAM is the cause of this problem.

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• HP Compaq Desktop Mod CQ511OF: W7, using the upgrade on the new hard drive disc

  Hello everyone; The 5 years, 320 GB hard drive on my HP Compaq CQ5110F desktop model is tired and I would like to replace it with a hybrid drive SSD Seagate 1 TB. My concern is that this computer has been upgraded from Vista to Windows 7. The vignette, I placed on this computer that came with the disc to upgrade the readings; "Windows Vista HmPm - Win 7 HmPm UPG fill HP".  So my question is can I use the drive of W7 upgrade to install W7 on the new 1 TB hard drive, the 'system' will use the product code located on the sticker provided with the upgrade disk? The computer is supported up to 1 TB Seagate Backup Plus.  The computer is, bicoeur AMD 2.5 GHZ, 32 bit, 3 GB of ram. I would be happy to provide additional information. I appreciate all the comments really. Thank you very much for your help, Oscarmint

  You cannot use an upgrade disc to install an OS on a new hard drive.

  You could clone the old hard drive to the new hard drive using a program like Macrium reflect free

  http://www.Macrium.com/reflectfree.aspx

• new GPU CPU RAM Motherborad everything on windows 7 wont boot in to windows at all when I turn on the screen of my power light then goes right (windows error)

  new GPU CPU RAM Motherborad everything on windows 7 does not start in Windows at all when I turn my power on the screen on then turn past directly to (windows error) I hit normal windows startup then goes to blue screen I tried safe mode, safe mode with netowrking, last know good configuretions and it stil goes to blue screen and again once it restarts please help fix this problem some

  Here's my Spece if necessary
  OS-Windows 7 Home Premium 64-bit
  Intel Core i5 processor 3570 k @ 3.40 ghz
  RAM-8 GB
  Graphics Card-MSI Nvidia Geforce 660 TI 2Go ECA
  Motherborad-H77MA G43 (Gen3)
  PSU - XFX Pro 750W Brozne Edition (Real Gamers Easy Rail)
  Hurricane box-Cyberpower (Black ATX) side Pancel Galss with blue lights)
  Monitor-LG W2340 HD 1920 x 1080 60 hz (DVI - D)
  Keyboard-Xtreme Gear (large buttons)
  Mouse-Xtreme Gear
  Here is ok all my spece pc I hope who help im going to call MSI and Cyberpower on this problem also if needed

  If win is an oem version supplied preinstalled on the PC, its coastline to the origonal material.

  If this is a start of commercial version full victory since the win dvd and see if a repair install works

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• 8 GB of RAM on the new Qosmio G50/55 X 300

  Hi to you all. I was wondering how to increase RAM on the new qosmio (G50 and X 300 series) models
  If I remember well from 8 GB of RAM are supported only with a 64 bit OS but it looking Toshiba web all around the world that seems in fact only the French model has inside a 64 bit OS, but you will see in any kind of Qosmio this possibility.
  For example, in Italy, in fact you can buy only the G50-103 with Vista Ultimate 32 bit... so, how will increase memory up to 8 GB?

  Sorry for my English (I hope you understand it...!)

  I guess you have wondered how to have 8 GB with an operating system and not only how to increase physically, or? If you want to have Vista64 you can also get a machine IN your country and buy a Vista64. As the platform supports more than 4 GB of RAM you won't have many problems to have a machine with 8 GB of RAM.

  On the other side: do you really need a lot of RAM? Each piece of the RAM to 2 GB would be recognized, but after 2-3 GB you do not recognize even when you work with photoshop. 3 GB of RAM are absolutely enough and everything would be better in a server or 3D workstation that requires a lot of RAM because of these LARGE textures and models.

  Welcome them

• Satellite L30 - 10Y black at startup the screen upward after the installation of new modules of RAM

  Hello

  I use the L30 - 10Y model with the following memory specification:

  standard: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (533 MHz)
  expansion module sizes: 256, 512, 1 024 MB

  I use Windows Vista Home Basic Edition with a 32-bit operating system.

  When installing, I removed the standard 512 MB module and added 2 modules of 1 GB compatible. At startup, it stays on a black screen.

  However, if I removed 1 1 GB modules and put the old 512 MB module to give me 1.5 GB, it works.

  I was wondering if anyone knows why this is and if there is anything that I can try to get the maximum of 2 gb, if it is indeed possible.

  Thanks in advance.

  According to the product page Toshiba Satellite L30 - 10Y is able to manage 2 GB of RAM (2 x 1 GB)
  I think that the problem is related to memory modules not fully compatible
  I think a new, fully compatible RAM modules should resolve this problem.

  PS: You updated the BIOS? If this is not the case, check if a new update of the BIOS is available on the European driver Toshiba page.

• Lightroom will not work on the computer after payment has failed and the new mode of payment put in.

  Adobe will not work.  Lightroom need to work.  Tried to uninstall Lightroom and creative cloud, they stopped working when my payment failed.  After putting in the new mode of payment that they still do not work.  Now don't reinstall it on mac 10.10.5 after several attempts and reboots.  Also, if anyone knows a phone number for adobe support.  I tried to find one, but it just shows that I have are not eligible for phone support... I pay for a product, I can call someone!

  allow a day of pst for your payment to process.  It is currently Saturday am pst.

  then check your account to see if it's what you expect.

  Otherwise, contact adobe support during the time pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  If it shows your subscription is current, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• destination of the newspaper Archive of current location to new location

  Hello
  
  I want to change my destination of the newspaper archive of current location to new location. Can you please give me the steps to change the destination of the journal archive

  No need to bounce the database.

  SQL > alter system switch logfile;

  and check the path to the new log archiving in this specific directory.

  Concerning
  Asif Kabir

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• SOUL 2015 (new version) is made all the media creation as in mode offline, but don't give any warning, and no media is offline.

  I can't describe it better than the title only.

  New version of 2015 of the SOUL is made all the media first as offline, but it is there no warning that any media is offline prior to export, and no media is offline in the project.

  Updates have been made to SOUL and Premiere Pro (and many others). Update and check if the problem persists.

  Thank you

  Regalo

• MD101LL/A + 2SSD + 16 GB of ram with the hiccups

  Hello ladies and gentlemen!

  Unfortunately my MacbookPro 13 "mid-2012 last only two years without any problem. I was more than satisfied with the purchase and modification of the Windows system and was amazed by the reliability that this computer can give you. When I bought it I also bought 16 GB RAM Kingston and asked the Apple dealer to install it. Year later, I bought the Samsung 850 PRO 128 GB SSD and put second life in this machine. Everything worked well, and by "working", I mean the intensive use of Photoshop, Lightroom, Illustrator, InDesign and same first also connected to monitor the second.

  After you install Yosemite, I started having some minor problems with sudden restarts and so on, nothing special when you're used to Windows machines. A few months later, I started having the problem with multicolored stripes on the screen who proposed the GPU problem or the motherboard. They showed only successive, especially on a very intense use. Then I went to the Iceland carrying my mac in the backpack I used to do on other trips. For 10 days, when MacBook was not connected to the secondary monitor, everything was fine. When I came back the problem began to occur more often at the point when I wasn't able to use the laptop more because he gave me only three annoying sounds and restart. I discovered that probably it's dying motherboard.

  I sent the MacBook to the Apple reseller and they cleaned the motherboard of every kind of moisture or rust might be, they have changed the two cables, run all this fancy diagnostics and my laptop was like new again. Everything started working. At least that's what I heard on the phone. When I arrived to pick up the consultant has started to show me how it works and then BAM! Scratches on the screen again! You should see his face!

  It turns out that when he holds the laptop with one hand, pressing the left side of the touchpad seeds present! Conclusion: problem with memory. The location of the bottom to be exact. Superior was beautiful, no matter what sticks of RAM, we used. The bottom has always been a failure. So I was left with only 8 GB of RAM and the upgrade of an another SSD instead of the Cd-ROM-Samsung 850 EVO 500 GB SSD.

  This configuration has worked quite fine, BUT from time to time, he showed a kind of hiccup that now are my daily problem...

  Please, watch the video below and tell me what the * is still happening?

  https://youtu.be/CMNX8esMBiU

  (ofc I know check slows performance, but it has the same appearance when the only recording not)

  TECHNICAL SPECIFICATION:

  Safari extensions installed yesterday while they is not serious

  No current in the Console kernel panic

  Yosemite 10.10.5 (14F27)

  BANK 0 / 8 GB 1600 MHz DDR3 RAM Kingston

  BANK 1 / no

  SAMSUNG SSD 850 PRO 128 GB / available: 48,85 GB / only for the system, applications and documents

  SAMSUNG SSD 850 EVO 500 GB / available: 14.59 GB / hiding of lightroom, all heavy, backups files

  ETRECHECK:

  EtreCheck version: 2.6.6 (226)

  Report generated 01/06/16 13:34

  Time 02:00

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (13-inch, mid-2012)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  Vacuum

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 555 - SN = 9G2280LMND3NC

  Video information: (Does that mean?)

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  DELL U2412M 1920 x 1200

  Software: (Does that mean?)

  OS X Yosemite 10.10.5 (14F27) - since the start-up time: 13 hours

  Disc information: (Does that mean?)

  SAMSUNG SSD 850 PRO 128 GB disk0: (128,04 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  System (disk2) /: 126,84 GB (48,83 GB free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 127,18 GB Online

  SAMSUNG SSD 850 EVO 500 GB disk1: (500,11 GB) (Solid State - TRIM: Yes)

  EFI (disk1s1) : 210 MB

  Boot OS X (disk1s3) : 134 MB

  Data (DIS3) / Volumes/data: 499,41 GB (14.59 GB free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk1s2 499.76 Go online

  USB information: (Does that mean?)

  NOVATEK USB keyboard

  Logitech USB-PS/2 optical mouse

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / System/Library/Extensions

  com.Wacom.kext.pentablet [no charge] (5.3.6 - 10.9 SDK) [click for support]

  Startup items: (Does that mean?)

  TuxeraNTFSUnmountHelper: Path: / Library/StartupItems/TuxeraNTFSUnmountHelper

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.EscrowSecurityAlert.plist [killed]

  com.apple.Maps.pushdaemon.plist [killed]

  com.apple.SafariCloudHistoryPushAgent.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.photolibraryd.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] com.paragon.NTFS.notify.plist [click to support]

  10 killed process lack of RAM

  Launch system demons: (Does that mean?)

  com.Apple.awdd.plist [killed]

  com.Apple.ctkd.plist [killed]

  com.Apple.ifdreader.plist [killed]

  com.Apple.nehelper.plist [killed]

  com.Apple.softwareupdated.plist [killed]

  com.Apple.wdhelper.plist [killed]

  6 killed process lack of RAM

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [operation] com.adobe.AdobeCreativeCloud.plist [click to support]

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  [loading] com.paragon.updater.plist [click to support]

  [operation] com.wacom.pentablet.plist [click to support]

  Launch demons: (Does that mean?)

  [operation] com.adobe.adobeupdatedaemon.plist [click to support]

  [loading] com.adobe.agsservice.plist [click to support]

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.klieme.TMSHelper.plist [click to support]

  [loading] com.klieme.TimeMachineScheduler.plist [click to support]

  [operation] com.klieme.TimeMachineScheduler.wake.plist [click to support]

  [loading] com.noatime.root.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  [loading] com.oracle.java.JavaUpdateHelper.plist [click to support]

  [loading] com.rockysandstudio.WUHelper.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [loading] com.google.keystone.agent.plist [click to support]

  [operation] com.spotify.webhelper.plist [click to support]

  [loading] com.valvesoftware.steamclean.plist [click to support]

  Items in user login: (Does that mean?)

  WD Quick View Application (/ Library/Application Support/WDSmartware/WDQuickView.app)

  Other applications: (Does that mean?)

  [loading]    QA2G25RMZ4.com.Wunderkinder.Wunderlist - helper

  [ongoing] com.adobe.Lightroom5.19912

  [operation] com.adobe.acc.AdobeDesktopService.85800.C8DB8C27-B43E-4D2C-9DCC-BB991669AA97

  [ongoing] com.Adobe.accmac.46040

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000012.Spotify

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000016.EtreCheck

  [ongoing] com.google.Chrome.26444

  [ongoing] com.wacom.ConsumerTouchDriver.84948

  [ongoing] com.wacom.TabletDriver.85516

  [ongoing] com.wdc.wdquickview.84096

  Plug-ins Internet: (Does that mean?)

  AdobeAAMDetect: Version: 3.0.0.0 - 10.9 SDK [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  Default browser: Version: 600 - SDK 10.10

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Silverlight: Version: 5.1.30514.0 - 10.6 SDK [click for support]

  JavaAppletPlugin: Version: 31 to check the version of Java 8 update

  Safari extensions: (Does that mean?)

  Facebook cleaner

  WOT

  SafariRestore

  EverNote Web Clipper

  Save in the Pocket

  SessionRestore

  Turn Off the Lights

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Java [click for support]

  MacFUSE [click for support]

  NTFS - 3G [click for support]

  Paragon NTFS for Mac® OS X [click for support]

  Tuxera NTFS [click for support]

  Tablet chart [click for support]

  WDQuickView [click to support]

  Time Machine: (Does that mean?)

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Destinations:

  TimeMachineBackup [network]

  Total size: 1.98 TB

  Total number of backups: 0

  An older backup: -.

  Last backup: -.

  Size of backup drive: Excellent

  Size of backup TB 1.98 > (disk size 0 B X 3)

  Top of page process CPU: (Does that mean?)

  12% WindowServer

  12% com.apple.WebKit.WebContent (21)

  11% kernel_task

  5% adobe CEF Helper (3)

  4% spotify Helper (2)

  Top of page process of memory: (Does that mean?)

  Com.apple.WebKit.WebContent (21) 2.30 GB

  Kernel_task 975 MB

  180 MB Spotify Helper (2)

  115 MB Adobe Photoshop Lightroom 5

  Safari of 115 MB

  Virtual memory information: (Does that mean?)

  19 MB of free RAM

  7.98 used GB RAM (865 MB Cache)

  1.95 GB used Swap

  Diagnostic information: (Does that mean?)

  January 6, 2016, 01:09:24 ~/Library/Logs/DiagnosticReports/Adobe Photoshop Lightroom 5_2016-01-06-010924_ .crash [deleted]

  January 6, 2016, 12:03:58 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2016-01-06-000358 _ [redacted] .crash

  January 6, 2016, 12:03:27 AM self-test - spent

  January 5, 2016, 11:13:23 ~/Library/Logs/DiagnosticReports/Notes_2016-01-05-111323_[redacted].crash

  January 5, 2016, 12:30:49 AM [redacted] ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-01-05-003049_ .crash

  January 4, 2016, 12:47:23 AM ~/Library/Logs/DiagnosticReports/Electron Helper_2016-01-04-004723_ [redacted] .crash

  Ashes of /Library/Logs/DiagnosticReports/PenTabletDriver_2016-01-04-000858_[redacted].cr 4 January 2016, 12:08:58 AM

  January 4, 2016, 12:08:49 AM /Library/Logs/DiagnosticReports/Kernel_2016-01-04-000849_[redacted].panic [click for more information]

  27 December 2015, 16:03:08 /Library/Logs/DiagnosticReports/Kernel_2015-12-27-160308_[redacted].panic [click for more information]

  16 December 2015, 14:52:58 /Library/Logs/DiagnosticReports/Kernel_2015-12-16-145258_[redacted].panic [click for more information]

  8 December 2015, 14:43:20 /Library/Logs/DiagnosticReports/Kernel_2015-12-08-144320_[redacted].panic [click for more information]

  Lack of RAM is hurt your performance based on the number of swaps.  Have you determined that the one RAM slot is defective or a RAM module has been/is perhaps the problem.

  Check if you have the panics of the kernel in you library.  If so, use these instructions to record and post a:

  https://support.Apple.com/en-us/HT201753

  Ciao.