Guard box reappear saying that msvcr100d.dll must be installed.

Similar Questions

• After System Restore Windows XP behaves strangely, said wininet.dll must be installed

  original title: XP startup problem

  My computer was slow, so I did system restore at an early date.  The system worked better, so I system restored recently.  Now the computer will just go up to my screensaver.  Does not start.  I can access taskmaster; but I am unable to run anything or to find beginning.  I have been informed that wininet.dll must be installed.  How can I restart or restore this computer.  I have windows XP.

  Hi ThomasCline,

  Try to boot your pc in safe mode to see if it works properly. http://support.Microsoft.com/kb/315222

  If everything works properly in safe mode, you need to configure your pc in clean boot mode. http://support.Microsoft.com/kb/310353

  If all above fails, try running the SFC, you are able to open the Task Manager, click application-> new task & Type-> sfc / scannow-> ok

  You will also need your cd of windows xp for this repair.

  I hope this helps...

• A little box comes up saying that uxtheme.dll is missing.

  Original title: HELP!

  my computer is a small box appear saying that I'm missing a UXTheme.dll How can I reinstall it? and how has he lost it? Well how he will be missed

  Hello

   
  1. when exactly you receive this error message?
  2 have you made changes on the computer before this problem?
  
  Uxtheme.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.
  
  Uxtheme.dll errors are caused by situations that lead to the removal or corruption of the uxtheme dll.
   
  Follow the steps mentioned below and check if that helps.
  Method 1: Run a virus with Microsoft Safety scanner scan and verify.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: Before you perform security analysis, make a backup of important data.
   
   
  Method 2: I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.
  http://support.Microsoft.com/kb/929833
   
   
   
  Method 3: If this is not enough, try to perform a system restore to the date when the computer was working properly.
  The restore of the system on your computer.
  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.
   
  To restore the operating system to an earlier point in time, follow these steps:
  a. click Start, type System Restore in the start search box and then in the list click on the system restore program.
   
  If you are prompted for an administrator password or a confirmation, type your password or click continue.
   
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  Reference: http://windows.microsoft.com/en-US/windows7/products/features/system-restore
   

• I get a msg saying that WDLCore.dll is missing

  I get a msg saying that WDLCore.dll is missing

  Hi Mike,.

  1. when exactly do you get this error message?

  2 have you tried to install or uninstall any programs recently?

  This error is related to Windows Live Messenger. If you have installed Windows Live messenger, and then uninstall and reinstall and check if this solves the problem.

  Uninstall a program

  If the problem persists, then please post your query on the Windows Live community forums to get help.
  In the Windows Live Forum

• Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
  In general, I was ignorant, but recently my PC feels like it becomes less stable.

  I'm surprised that it returns no results on any search engine.

  Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
  In general, I was ignorant, but recently my PC feels like it becomes less stable.

  I'm surprised that it returns no results on any search engine.

  Assuming that your spelling is correct, your computer is probably infected by malicious software. Download, update and perform a quick scan with Malwarebytes.

  Malwarebytes.org

  How to use Malwarebytes

• Adobe ProXI and DC are installed but box keeps saying that I have to buy.  It does not accept my serial number

  Adobe ProXI and DC are installed but box keeps saying that I have to buy.  It does not accept my serial number.  I don't know what to do.

  Hi Holly,

  Please visit: Activate and deactivate Adobe products

  Applications creative Cloud back in test mode after an update until 2015 for CC

  I hope this helps.

  concerning

  Megha Rawat

• I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed.

  I am running Windows 7. I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed. Also, I lost the ability to transfer MP3s to iTunes and convert them. All of the suggestions. I had a virus attack and had to wipe my hard drive, and then reinstall the programs. ITunes is since that happened. Before I could copy a file from my Olympus digital recorder and make the transfer. Now, I can not drag and click between the windows.

  Thank you

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  Option (2)

  Click on this link:http://www.pcerrorfixtip.com/VistaAudioLib.dll-157425.html

  He helped?

• Network controller is not properly understood, impossible to download anything, the diagnostic report saying that there is no driver installed for this device

  Original title:. network controller error?

  the device, network controller, is not understood correctly. report "tv_ConfigMgrErr1". Impossible to download whatever it is or it causes Internet Explore stops working. I get a diagnostic report saying that there is no driver installed for this device. It was working fine yesterday and then around 05:45, my computer made automatic updates and it was after that when I tried to download a game for my grandson and started to get in trouble. I'm no computer expert so I don't have any idea what to do.

  Hello

  1. you are using an internet connection wired or wireless?

  2. What is the exact error message you get when you try to download?

  3. what happens when you try to download the game?

  4. What were the updates that were installed yesterday on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can see the following link.

  Solve the problem of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  You see the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Method 3:

  I suggest you uninstall and reinstall the network card and check. Follow the steps.

  (a) click Start and type devmgmt.msc and press ENTER.

  (b) find the network card and expand it.

  (c) right click on the Uninstall adapter selection.

  (d) restart the computer.

  Windows should install the necessary drivers.

  You can now try to install the latest driver on the manufacturing site.
  Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• I can not install Illustrator, they ask me to change the direction of the application, but he always says that it can not be installed in the root directory. What can I do?

  I can not install Illustrator, they ask me to change the direction of the application, but he always says that it can not be installed in the root directory. What can I do?

  Hi alexisp25256377,

  Please mention the exact error message that you found when installing Illustrator and here are the steps that you can follow to change the installation location.

  1. go to preferences using the gear on creative cloud icon

  2. go in creative menu Cloud

  3. do Apps and then change the installation location to another directory.

• I downloaded the Adobe Pro 9 Setup program on a new mac and it says that it can not be installed because it comes from an unidentified developer. I have a serial number and want to just 9 Pro on my new machine

  I downloaded the Adobe Pro 9 Setup program on a new mac and it says that it can not be installed because it comes from an unidentified developer. I have a serial number and want to just 9 Pro on my new machine

  How to open third-party applications to developers not identified in Mac OS X "Mac tips.

• I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  Hi Marleneb3511919,

  I'm sorry for the inconvenience caused to you.

  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0

  Please let us know if this goes through.

  Kind regards

  Aurélie hamadi

• I get an error saying that plibc32.dll is not found. What is this and how do I install it?

  dll programs

  http://www.ProcessLibrary.com/directory/files/plibc32/

  Info about Eastern at the link above.

  A Malware scan to make sure that it is not Malware:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  And if it is legitimate, use Autoruns to plibc32.dll of startup, because it seems to be a start of remainders entry of...

  Read the info at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Most of the time when I try to install a game on my PC, I get error message saying that a dll file is missing

  Original title: dll error

  most of the time when I try to install a game on my pc. After I get the error message indicating that a file xxxxx.dll is missing, once again if I install this file another yyyyy.dll file is missing out of her Dungeon on entry

  Hi Prakash,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

   
   
   
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
   
   
   
  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?
  3. what game you are trying to install?
   
   
  Please follow the methods and mark the question below:
   
   
  Method 1:
   
  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.
  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
   
  Note: You must follow the step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
   
   
   
  Method 2:
   
  I suggest you to refer to the link below to use the (SFC) System File Checker tool to troubleshoot missing or corrupted system files in Windows:
   
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
   
   
  Method 3:
   
  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:
  http://www.microsoftsafetyscanner.com/
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
   
  Method 4:
   
   

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  (b) in the search box type eventvwr.msc , and then press enter.
  c. now, click Application in the observer of events (local).
  d. now, looking for event log on the right side of the event viewer window.

  Reference:

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? :
   
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  I hope that the information above helps you.

• I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

  I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

  Hello

  Have you changed the boot order?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  See you soon.

• When I try to install iTunes, I get an error saying that msvcr100.dll is missing.

  while trying to install I Tunes, I get the message cannot install because MSVCR100.dll is missing.  How do we install MSVCR100.dll?

  Install the Visual C++ Redistributable for your system

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26999