GUI for Console ESX?
Just purchased and installed with ESX vSphere. However, I'm really not up on top of the Linux CLI. Is there a GUI for the ESX console? If so, how can I install / start? Thank you.
vSphere Client is a graphical interface for ESX.
---
MCSA, MCTS, VCP, VMware vExpert 2009
Tags: VMware
Similar Questions
-
Command not found in the service console ESX 4.0 u2
Hi all
I have a very simple question.
I have haven´t access to the service console ESX 4.0 for some time and today I need run commands to verify information on some host bus adapters.
I logged a user then used 'su root' to switch to the ROOT user.
I use Putty to connect to the Service Console.
But when I try to execute the following commands it said "Command Not Found":
vmkload_mod
esxcfg-module
I read VMware KBs, that say to use these commands for this version of ESX, but I can´t do run.
I think the answer is something very simple, but I can´t find it.
Anyone have any ideas?
Thank you
Mark
Try this command:
quo
as documented in http://kb.vmware.com/kb/1006573
-
What command to get console ESX 4.0 logic unit number information
How do we get under reference information LUN from the console ESX 4.0?
LUN id LUN unit number logic of identification name, name of the logical unit number label. The example is given below
Example:
LUN name: EVA_LUN10
Label LUN: 4d0b1f3e-55a1075f-1764 - a 0017, 4770474
ID of the LUN device: naa.600508b4000e1b8b00007000024a0000
LUN ID: 20
Can what command we use to get above the need for information?
esxcfg-scsidevs - m
Use this command.
-
GUI for the PowerCLI scripting
Someone knows a software or tool that generate the GUI for the PowerCLI scripting?
There are a few, Sapien is free and it's called PrimalForms Community Edition.
-
Y at - it an update for VMware ESX 4.1 update 1?
Dear friends;
I heard that VMware releases update for VMware ESX 4.1 update 1. Could you please tell me if this is correct?
And would you please reference me this article?
ESX will not available in vSphere 5.0. It will be always supported in the same way that VI 3.5 is still supported, however. Here's an official blog stating that ESX 4.1 is the latest major version of ESX.
With the release of VMware vSphere 4.1, we announced that 4.1 will be the last version of vSphere to support the ESX and ESXi hypervisor architectures.
-
GUI for VMware Tools in Linux clients
When I install VMware Tools in a Windows client, I have a GUI to manage VMware Tools.
Are there any similar GUI for Linux guests?
If so, how can I run it?
Concerning
Marius
Simply call "/ usr/bin/vmware-toolbox" from your X terminal.
AWo
VCP 3 & 4
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
-
We have a license GPFS and SAN storage. I am trying to create a storage shared for multiple ESX and ESXi hosts share existing virtual machines. We tried once NFS, it of a little slow and consume too much bandwidth LAN.
Anyone can help answer? Thank you very much in advance!
It depends on your storage space.
You must connect all hosts to the same San, then follow the configuration guide of ESXi and specific documentation for your storage space (for sharing LUNS on multiple hosts).
André
-
Yet all the command line or are there types of gui supported in ESX 4?
If there answer is y at - it plugins preferred to do this via the GUI?
svMotion is now integrated in the GUI. When you vMotion a virtual machine, you will be able to travel to the host and/or the data store.
-
Main configuration files for vmware ESX configurations
<! [endif]
> <![if gte mso 9] ><!--
/ * Style definitions * /.
p.MsoNormal, li. MsoNormal, div. MsoNormal
{"mso-style-parent:" ";"}
margin: 0
margin-bottom: .0001pt;
MSO-pagination: widow-orphan;
font-size: 12.0pt;
do-family: "Times New Roman";
mso-fareast-font-family: 'Times New Roman' ;}
@page Section1
div. 1
->
What is the main configuration file for VMware ESX
configurations? (only one file without path name)
Thank you!
ESX.conf
-
How can I change DHCP to static IP address for my ESX Server?
Hi all:
because of my mistake, I configured the ESX for DHCP server.
So, how can I change DHCP to static IP address for my ESX Server?
Thank you very much.
hihiy
Hello
You can assign static IP using the below command
esxcfg-vswif - i
Restart the network service
restart of the #service network
Try this command to list the IPconfig
#esxcfg - vswif - l
Hope this helps!
-
Is there a GUI for MySQL on a Mac that works as the likes of Heidi SQL on PC?
Basically, I want to be able to grasp the content directly in the tables of database rather than having to build a backend.
You could try on Pro: http://www.sequelpro.com/ it's very good and best of all, it's free.
HTH
---
Hieu Bui
Dreamweaver by WebAssist extensions
-
Is it ok/possible to add a GUI to my ESX server service console?
Can I download one of the lightest LINUX GUI and run it from the service console? Also, how to connect using putty? Should be on licence somewhere?
You can add a graphical interface on the ESX console... Can be... but be careful that the console has only a limited amount of Max (above 800 MB) memory and it has been optimized to manage your virtual machines. He is also set to always run on CPU0.
If you interfaces graphics crashes... it could take down the management of all your virtual machines.
So the question is "If you do that?", then the answer is no. you'd better not.
It also cancels your support/warranty. Your ESX Server will be is no longer supported.
If it's for an experience... go ahead... If you want to run production on this same host... don't even think about it.
--
Wil
_____________________________________________________
Visit the new VMware developers at http://www.vi-toolkit.com wiki
-
GUI or Console output javascript extension
While working at webworks I have user "alert" for the values of the variables and to control the flow of control.
Now I started to write javascript in java extension
but whenever I tried Dialog.alert ("message"); the extension projects working
is it like the extension of javascript may not show any output GUI?
If that's how I can see in the console?
How can I check the values of variables?
or whenever I click on a button I want to see that the id of the function being called correctly so I usually put alert()
is there something that I can put inside the java classes or can print the output on console?
He got so called DIalog.alert I have to do
class Recording extends Thread{ public void run(){ UiApplication.getUiApplication().invokeAndWait(new Runnable() { public void run() { Dialog.inform("Thread started inside java and this is inside run"); } }); } }
-
Address IP of the Service console &; Esx server name
Hello
How to get the address Ip of the service console & the name of the ESX Server in the data center based on the cluster?
Property 'Networkinfo"of the esx server does not give advice for Service console Ip address to me.
Thanks in advance for the answer.
Try it like this
foreach($cluster in Get-Cluster){ Get-VMHost -Location $cluster | ` Select @{N="Cluster";E={$cluster.Name}}, @{N="Host";E={$_.Name}}, @{N="Console IP";E={[string]::Join(',',((Get-VMHostNetwork -VMHost $_).ConsoleNic | %{$_.IP}))}} }
-
Is it better to have all of your VMKernel ports on the same subnet or subnets separate (one for each role, iSCSI, management, vMotion, FT)? Are their potential problems with either scenario? Please include the ESX and ESXi. I want to get my setup just as it should. Please let me know also if you need additional information.
I have licenses for ESX and ESXi, but I'm leaning toward ESXi are all vSphere 4 Update 1.
Hello
In fact, you have to use separate subnets for your vmkernel ports but they can run on the same thread. You can share a subnet between a vmkernel and service console, but not between two vmkernels. Just like that. So yes, you need to use several subnets.
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]
Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]
Maybe you are looking for
-
does anyone know how to do additional custom tasks in the e-mail address address book fields?
example of... for some people, I have 3 or 4 address I need to register to this contact is it possible to do this? Ty in advance for any help you can provide!
-
I have a presario CQ57. It is stuck on the blue screen that says "enter administrative password or power on password." After I entered a wrong password 3 times, I get the stop code: 54768868. All codes or else fix it?
-
Scanning on a Laserjet M1212NF MFP
I spent a good hour 1/2 of trying to figure out to scan on this machine without a bit of luck. The answer is probably right in front of me, but I just can't figure out how to start a scan. Help...
-
I bought the Speedy PC Pro & he then ran my microsoft security essentials has stopped working. When I went online to re-download it said that I had to remove what was already installed. My system won't let me delete it! Also with the Speedy PC Pro I
-
How to reformat my laptop Vista Spanish to English Windows XP
How do I reformat my laptop Vista Spanish to English Windows XP - there was no disk Vista understood when I bought the laptop