HAL question Data Source

Similar Questions

• Basic questions about the PL/SQL web services and data source names

  Hello
  
  I've successfully generated a web service for a procedure from PL/SQL packaged JDeveloper 11.1.1.3.0).
  
  The following code was generated in the base class for web services:
  

   __dataSource = (javax.sql.DataSource) __initCtx.lookup("java:comp/env/jdbc/dbconnectionDS");

  However in the weblogic server, the data source name is jdbc/Gisele for deployment fails in a first time.
  
  What is the recommended procedure to solve this problem? The obvious solution is to manually change the source - that's what I did and it worked fine. However if I re - generate the web service I won't lose my change. Is there a better way to do it?
  
  Another question - in the web.xml file that is generated, there is a resource-ref to the data source. I was hoping that change the data source name it would help, but it didn't work. What is - it used to in this context?
  
  Thank you
  Luis

  I forgot to add, so in case some time later and you want to update the connection to your service details, all you have to do is to add the following entry in your weblogic.xml:
  .
  
  JDBC/ref_name_from_web. XML
  JDBC/new_jndi_name
  
  .
  And in this way, you will not have to change any code level to point your web service to another connection.

  Vishal-

• stupid questions on the use of mds-GOSA/bip_datasource data sources.

  Dear gurus,
  I'm confused about the use of some as securities data sources.
  And what is the relationship of them with RPD source data/connection pool setting?
  
  As I found in the turning performance guide, while I can't find where is the caller / user of these data sources and never mentioned turning guide turning data sources RPD which I think is more important...
  
  So I think I must have Miss understanding of something, need your help!
  
  Michael

  Hi Michael,

  The data sources mds-GOSA/bip_datasource etc. are for the weblogic server access to the metadata of Fusion Middleware.

  If you remember, we had used the RCU to create a repository of information of configuration settings, host of Fusion Middleware /product information/versions etc in a separate database, and these data sources are created in weblogic, and the different products that we install, in this case OBIEE/RTD/BIPublisher etc. can interact between them, transparently and through weblogic.

  Since then, it is the common platform (application server) on which all products have been deployed, it is necessary that we tune elsewhere too for optimal performance from the Infrastructure point of view.

  Now, the connection pool of the physical layer in our .rpd is all about access to data, and so the setting guide does not, in this regard because it is completely dependent on the type of data source, network interfaces of appeal, not concurrrent users, total dashboards, reports etc etc which is dependent demand.

  The setting guide is all about the setting of the Middleware Infrastructure + optimal settings for middleware (middleware) only.

  Hope that I was clear.

  Thank you
  Diakité

• A question for shared in 2 data source model of the application of the project in JDEV11

  Hi all
  My application has the following structure:
  
  ...
  | _Model_A
  | ...
  | | _Application-module-1
  | | _Application-module-2
  |
  | _ViewController_A
  | ...
  |
  | _Model_B
  | ...
  | | _Application-module-1
  | | _Application-module-3
  |
  | _ViewController_B
  ...
  
  As you can see, there are 2 projects of model and they share an Application Module: Application-Module-1
  
  I created 3 branches: APPDS_1, APPDS_2, APPDS_3. When you set up these 3 AMs in the model project, then select "JDBC URL" as the type of connection, both applications can work properly, say, source of data/JNDI are correctly at the launch of the JDEV 11 apps. Then, when select 'JDBC Data Source' as connection type, that is to say, use it as the source of data for Application-Module-1, both Model_A and Model_B: java: comp/env/jdbc/APPDS_1, app B throws an error:
  
  oracle.jbo.DMLException: Houston-27200: failure JNDI. Impossible to research data Source in the context...
  
  but app has still works.
  
  play with the value of data source in the Model_B for Application-Module-1, it is that set the JDBC data source "* jdbc / APPDS_1 *" make a app B! But, as far as I know, the correct value for 'JDBC Data Source' in 11g should be: java: comp/env/jdbc/APPDS_1.
  
  This really disturbs me. Why would this happen? Is it because that the Model_B use the same name that Model_A, IE. Application-Module-1?
  
  Just tried to rename it to Model_B so request-Module-1 becomes application-Module-4, still got the same error.
  
  
  Thank you
  Shawn
  
  Published by: shawn_abc on June 13, 2012 15:19

  # The best way is to use jdbc/APPDS_1

  The initial prefix part of the Datasource resource tree.
  Read here, http://www.coderanch.com/t/316003/EJB-JEE/java/lookup-java-comp

• Logging data source expressions

  Hello

  We use NI TestStand 2012 here in our society, and I have a simple question.

  In any test pass/fail (numeric, String, pass/fail regular), is it possible to have the TestStand to include the data source expression in the default report?

  I can add it manually in the component "Other results", but I have to do for each step.

  I see that on conditional expressions and flow measures are included in the report, but not the my expressions of pass/fail, which are found in the data source tab.

  It seems obvious to me that the data source should be there, otherwise I just in the report the name of the step and the result and no information of what has been actually tested.

  Thank you in advance!

  Leandro

  It does not show what the '10' value means: speed, voltage, current, RPM, etc. unless we call actually step in this way.

  Thanks again.

  There is a 'units' set numerical limit markets which addresses this problem. You can even specify custom units if you would like, although there are many built in those you choose as well. Also the name of the step should usually give an idea of what exactly is being tested.

  For the recording of Boolean expressions, probably the simplest thing is to use a stage model that is preconfigured to connect to the data source, or you can create a new custom step based on the test of success/failure that connects to the default data source type, or you could write a tool that passes through the sequence files and change all tests pass/fail to connect their datasource.

  -Doug

• Report Builder 1.0 will not connect to the data source for Reporting SERVICES

  We have a few users who are unable to connect to SSRS on SQL Server 2008 using the Report Builder version 1.0

  (We will be updating soon, but it's a slow process, and now users have questions)

  Instead of disputed for their IDs, they are requested to select a data source.  This information is supposed to be filled automatically when the user starts the Reporting SERVICES report designer.

  Does anyone know where/how SSRS communicates information to start the application with one click Report Builder, and where, if anywhere, it stores?

  Hello

  The following forum seems most appropriate for your question:

  https://social.msdn.Microsoft.com/forums/en-us/home?Forum=sqlreportingservices

  You can get a faster response there.

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• SSRS for lack of outer join with the Oracle data source

  It seems to be a problem with the Oracle driver used in the Reporting SERVICES query designer.

  When you use an Oracle data source, if I create an outer join in the graphic designer, it automatically inserts '{OJ' before the join and '} ' after her.  This is an incorrect syntax for Oracle and refuses to start.  The curly braces and the JO editable in designer text, but if I go back to the graphic designer and immediately to reintegrate them.

  Only, this has started to happen a year or two ago - before that it worked, but with the old (+) syntax.

  Can it not be healed?  It makes things very difficult.

  -Geoff

  Hi Geoff,

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the Forums of the Oracle Support; We recommend that you post your query in Oracle Support Forums to get help:

  https://forums.Oracle.com/forums/main.jspa;JSESSIONID=8d92100c30d8fb401bcbd10b46c38c9ddf1a3242549a.e34SbxmSbNyKai0Lc3mPbhmSc3aNe0? CategoryID = 84

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Where is able to select the GPS data source?

  Hi, guys.

  I have a question about the GPS.

  I want to know the source of GPS data.

  I think that 2 types of sources of GPS data as internal device of GPS and Bluetooth GPS Receiver.

  If the user has a BB with chip GPS and Bluetooth GPS Receiver, where it is able to resolve?

  And I thought that this version of the OS 4.2 and 4.3 and 4.5 - 4.7 have different parameters to set the GPS data source option.

  Thank you guys.

  Hello

  The GPS data source is available for consultation in Options - Advanced search - GPS. If you do not have an entry Advanced Options (pre - 4.3 software) then you should see a GPS option on the first screen of Options.

  Kind regards

  Mike.

• EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  Hi all

  When you open the HFM application below the error is thrown.

  EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  
  

  Another application is created as Test HFM, is the opening perfectly.
  

  Please help me on this issue, very urgent.

  Thanks in advance

  Concerning

  Satheesh.S

  Thanks to all of you question has been resolved by re set up again for the configuration database and upgrade from previous version.

  Concerning

  Satheesh.S

• Create the data source NoSQL Oracle using Oracle Weblogic 11 g

  Hello

  I'm working on a VINE by which I want to connect NoSQL Oracle database with Oracle Weblogic11g as a new source of data in Oracle Database 11 g of accompaniment.

  So my question is that Oracle Weblogic 11 g support NoSQL Oracle database as a data source OR can I plug NoSQL Oracle database as the source of data with Oracle Weblogic11g?

  Thank you...

  Hello

  By 'data source' I assume you mean a JDBC data source. Is this fair?

  If so, please be aware that NoSQL DB does not support SQL or JDBC, although these features can be added in the future. Currently, to access data in the NoSQL database from your application, you must use the Java APIs in the pilot of the client which is included in the package. Please see the Starter Guide for more information.

  That answer your question?

  -mark

• Getting started with Open manage the essential problem of Server Data Sources

  I installed a server for and with Open Manage Server Essentials... discovered my network and found a lot of good servers... 1 server has a green check mark and you can see in the Data Source, it uses the administrator of the server with the Version 7.1.0. I downloaded the OMSA node in 7.4.0.2 on another server, etc. SNMP installed and the server is located with a gray question mark and the data source is an Agent of Version 2.0 of Windows Hardware... is anyone has any advice how to handle? And want to install server after the server to see it in OME centrally on a single management server...

  Sorry for my bad English and thanks for all the info.

  Thomas

  OK, so make sure you check out the first installation tutorial in the console of the OME.

  1. you must on the box, so 7.4 OMSA's fine.

  2. be sure that you did the necessary SNMP parameters in the box of the OMSA (services.msc, SNMP, accept any host paackets - or use the ip address).

  3. you can use the tool for troubleshooting Dell desktop OME to test SNMP connectivity to the server with OMSA on it.

  4. I think that the FAQ (delltechcenter.com/ome) contains some tips in the discovery section (3.4)?

  That should make us started.

  Thank you

  Rob

• search form Web apps: how to retrieve the value of the data-source type field

  Hello

  My question is:

  How can I retrieve the value of the source field of a web - app data-types when you insert the "form web search apps" on a web page.

  I have a web application that contains fields from the data source of the type. These fields to recover the (data) value of the 'web app' - 'elements of the field' field of another web application.

  When I insert the form

  Web apps

  Web apps-search form

  Name of the Web application

  It displays the fields with the field (ie. string, number) types other than type of field 'data source '.

  (Note: in the mode 'model of list' module of data tags, the fields of the data source are visible).

  What other (alternative) possibilities are there to create a search form?

  Thanks for your help.

  Kind regards

  Carla

  By chance, I came up with this workaround. Of course there are other methods to get your data from a web - app, but if you want to use the 'Web apps search form', it would be a workaround.

  I noticed that the "Web apps entry form" contains all the fields of web applications for your web application (including the fields of the data source).

  It is possible to add the fields to the form of the "Web apps entry form" in the «Web apps search form»

  If you insert the "Web apps entry form" on a blank page, you will see all the fields in your web App including the "data source fields. The names of form fields contain something like.

  "

  If you copy the form field desired (containing the "CAT_Custom_number"), you can paste it on the page in the form where the "web app search form" is inserted.

  In short:

  1. Add the "Web apps entry form" form on the blank page

  2. Select & copy the form fields that contains the 'web app data source field' and its value

  3. Add the "apps Web search form" on page (empty)

  4 paste the items copied from step 3 in the "Web apps search form»

  5. structure of the form with the fields you want, including the SEND/SUBMIT button

  6 structure and style of the search with your own HTML and CSS form

  7. test the form

  Krgds, Carla

• Smart Data Source Manager seen corrupt View

  Hello

  I had updated my V11.1.1 smartview just to find out that all the new versions have not been completely works flawless for me, so I decided to downgrade to V11.1.1 again.

  Since the downgrade my opinion however "Smart View Data Source Manager" is corrupted, so I can't create, edit or delete anything (illustrated: http://www.imagesup.net/?di=1613887541459). I correctly uninstalled any previous update until I installed the old version again.

  Everyone faces the same question and could probably help me to restore the correct view?

  BRGRDS,

  Daniel

  Have you tried to remove CAOptionsXML of [HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Options]?

  HTH-

  Jasmine.

• The research of Web applications with fields of the Data Source that contains multiple values

  I have a Web application with a field that allows multiple values to be recorded similar to the list box. I need limit the allowed values for a large, over the list of the values currently stored in another Web application as a data source. I can not apply to the type of Data Source field that allows only single value selection. I also need to be able to use the search form Web App to search for items containing 1 OR more of the values in this field (a type of list control field search functionality). Here's what I tried to field types:

  • Text (String) or text (multi-line) field type - By saving a list of values separated by commas (outputs in the same way this list box) to an entry of text or textarea, the search only logic search exact string (including commas) and does not analyze individual values.
  • Type of list (checkbox) field - it allows me to search for multiple values using the logic of the GOLD, but the web application stores only the values that have been entered as an option in the field settings real web app. I tried to use a checkbox with minimal or empty options list, hoping that some values I sent more separate by a comma value chain would be still stored, but because the values come from my Web App data source and not stored with the field options list, they were not saved.

  Someone at - he found a way to do it?

  My other question is how can I use a multivalued field to similar as described above but return results containing the elements with ALL the values of this field (AND logic).

  Can someone enlighten me to the inner workings of the search BC logic web app?

  You don't need to use the predefined boxes or types of entries. Everything you can represent as a string (such as the values separated by commas in your example) can be saved in any field of webapp. The types of fields defined in the Web application are only used to translate internal representation (all channels) to the various user-friendly interpretations (checkboxes, radios, dates, links, etc.)

• Add a data source to cfm 11/Tomcat

  It is possible to add a to the tomcat container jdbc data source runs an instance of CF 11?  If so, is any documentation on how to do it?

  Thanks in advance...

  Ok. To answer your original question, yes it is possible to add a jdbc data source to the container tomcat running in ColdFusion. I will illustrate this by adding a PostgreSQL JDBC data source. Be aware that the following is experimental and, as far as I know, not documented elsewhere. Take notes that will help you, if necessary, to cancel the procedure and return the system to its original state.

  The steps are:

  1) download and install the latest version of PostgreSQL for your operating system database management system; make sure it is running. Write down the password you give to the server.

  (2) download the driver JDBC41 of PostgreSQL, version 9.3 - 1102. It is the version that corresponds to Java 1.7 and 1.8, the versions of Java Virtual Machine from ColdFusion 11. The download is a JAR file. Copy it to the Tomcat lib directory located at {CF_HOME_DIRECTORY} \runtime\lib\.

  3) you now add the driver details for the Tomcat configuration files, {CF_HOME_DIRECTORY}\runtime\conf\context.xml and {CF_HOME_DIRECTORY}\runtime\conf\web.xml. }} Make a backup of these files before continuing.

  Open the context.xml file in a text editor and add the following element just before the last end tag:

  Type = "javax. Sql.DataSource' driverClassName = "org.postgresql.Driver"

  URL = "" jdbc:postgresql://127.0.0.1:5432 / booktown ' "

  username = "cf_user" password = "cf_password" maxActive = "20" maxIdle = "10" maxWait = "-1" / >

  Open the web.xml file in the text editor and add the following element just before the last end tag:

  example of postgreSQL data source

  JDBC/postgres

  javax.sql.DataSource

  Container

  (4) the resource XML element points to the URL of the database of the booktown. I will now add this database and user for the PostgreSQL server.

  Download booktown.sql. Use it to install the database of the booktown on the command line by running a PostgreSQL command as

  psql-f /path/to/booktown.sql - U postgres template1

  If it works without a hitch, then the booktown database will be installed. The user is initially the default superuser "postgres". Use it to connect on the command line:

  psql - U postgres

  It will ask you to enter the password, the one you threw down earlier. The command line begins with the command prompt:

  Postgres = #.

  Now, create another user, cf_user, also on the command line, corresponding to the resource XML element:

  Postgres is # CREATE ROLE cf_user PASSWORD "cf_password" SUPERUSER CREATEDB CREATEROLE INHERIT LOGIN;.

  (5) you have now completed setup. Restart ColdFusion.

  To test, save the following code in a CFM file and run it.

  username = "cf_user";

  password = "cf_password";

  classObj = CreateObject ("java", "java.lang.Class");

  classObj.forName ("org.postgresql.Driver");

  driverManager = CreateObject ("java", "java.sql.DriverManager");

  connectionURL = "" jdbc:postgresql://127.0.0.1:5432 / booktown '; "

  Conn = driverManager.GetConnection (connectionURL, username, Password);

  myQuery = "" SELECT * FROM books ";"

  preparedStatement = conn.prepareStatement (myQuery);

  RS = PreparedStatement.executeQuery()) ();

  While (RS. Next {}

  WriteOutput (RS. "GetString ("title") &"
  ");

  }

  RS. Close();

  Conn.Close ();

  To cancel the procedure above, first stop ColdFusion. Then remove the jar from Tomcat lib direct and restore the context.xml and web.xml to their original state. You can also uninstall the PostgreSQL database management system.