Half of the programs begin with a different program

Similar Questions

• Mail crashes when the address begins with 'j '.

  Hello

  When I opened a new mailwindow in AppleMail and start typing that address whitch starts with the letter j, the program crashes.

  Any other letter works very well.

  It is possibel to trigger the crash over and over again.

  So far, only solution is to copy and paste the address.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Oracle Text returns no results when the string begins with two consecutive vowels

  Hello

  I hope someone can shed some light on a strange problem, that we face.

  Oracle Database 11 g R2 (11.2.0.4) EE 64 bit running on Windows 2008 Server R2.

  When I create an index of context on a column varchar2 (surname), it works fine when the surname begins with a consonant or a vowel. But when the family name starts with two vowels, that it fails to return the file?

  Please see example below:

  create table t1 (surname varchar2(50));
  
  insert into t1 values ('OURS');
  insert into t1 values ('JOURS');
  insert into t1 values ('ONES');
  
  commit;
  
  -- sync every 10 mins
  CREATE INDEX PERSON_SURNAME_IDX ON t1
  (SURNAME)
  INDEXTYPE IS CTXSYS.CONTEXT
  PARAMETERS('MEMORY 50M sync (every "SYSDATE+10/1440")')
  NOPARALLEL;
  
  -- no rows
  SELECT surname 
  FROM t1
  WHERE CONTAINS(surname, 'OURS') > 0;
  
  -- 1 row
  SELECT surname 
  FROM t1
  WHERE CONTAINS(surname, 'JOURS') > 0;
  
  -- 1 row
  SELECT surname 
  FROM t1
  WHERE CONTAINS(surname, 'ONES') > 0;
  

  Any help or advice greatly appreciated.

  Thank you

  Ours is in the list of default stoplist (list of words that are ignored)

  http://docs.Oracle.com/CD/B19306_01/text.102/b14218/astopsup.htm#CEGBGCDF

• Download photoshop for free twice on the same computer with a different account?

  Download photoshop for free twice on the same computer with a different account?

  No, you can use the trial only once on a single computer.

  Concerning

  Hervé Khare

• Determine if the result of the query begins with a number

  I have the results of the query like this
  
  123PKM
  AAPL
  WB
  9865W
  FC
  QRST
  
  How can I determine if the result of the query begins with a digit?
  As 123PKM and 9865W do not start with a number.
  
  But others did not.

  The refind() would make this task very easily. Not tested, but I think that
  It would be the idea.

  #refind('^[0-9]',myQuery.aField,1,false) #.

  ColdFusin documentation in all directions will define completely the
  refind() function capabilities. It will give even some basics
  the syntax of the regular expressions used by this function.

• CS6 installed, but half of the programs do not open and give me an error message 'Bad Image'

  3 days ago, I installed CS6, opened the first time no problem, now it gives me an error called "Adobe Premiere Pro.exe - bad Image":

  C:\Windows\system32\MSVCP100.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  After that, I deleted CS6 completely from my computer and reinstalled it, after that I scanned for virussus. Still the error message is displayed.

  I use Windows 7.

  Manually install the MSVC 2010 runtime by downloading the correct version of Microsoft.

  Mylenium

• Card problem OBIEE - points on the map illustrated with two different images.

  VI have obiee 11.1.1.7.1 where we have an analysis with a card.

  The base map and the theme is created in 11.1.1.7.3 mapbuilder.

  VI have a variable shape layer in the OBIEE plan. The shape is a circle, and has four different locations (using four different colors to show the differences).

  A query can show 20-30 positions on the map.

  So far so good.

  When we run the analysis, the following occurs:

  1. circles of 20-30 (with one of four different colors) are presented correctly on the map. These results appear directly on the map once we click on "Apply"

  2 an hourglass appears and we will have to wait for 20 to 60 seconds.

  3 then an "x" appears in each of the 20-30 circles and the hourglass disappears. The 'x' is the mapbuilder theme that we created if we do not have any Style 'Render' associated with the Style. If we have a rendering style, for example a simple small point, this point then appears with the circle.

  Our question is how we can force mapbuilder for not making the 'x' in the map. That's where we get terrible response time.

  
  

  Best regards

  Joel
  

  We have solved the problem using only the datawharehouse data to generate BI data layers.

  We have created a new BI data layers using variable forms. Then, we chose a layer of bridge custom rather than use the MapBuilder theme that we created earlier. Then, we used the points Long/Lat for the generation x and y.

• Merge two of the same photo with applied different exposures

  I have a picture that I copied a couple of times and imported to LR. I've adjusted to the exposure of the sky in a single copy and then in the foreground in another. How to merge two photos to make the sky a as well as the first plan of the other?

  Combination of two images requires another program like Photoshop, Photoshop Elements, or some other software pixel editing program. If you have two different exposures to different contexts and use Lightroom 6 or Lightroom CC you have an option to use Photomerge and choose merge to HDR. But the part that there is no way to combine the two images using only Lightroom.

• Return the same row with 2 different queries

  Can I set up a hint of context that will allow me to do a search on '21-12345' or '21 & 12345' and have the same return line?

  There are various ways you could do this. You could create a lexer which sets the hyphen as white space, so that the chips would be indexed separately. However, the hyphen has a special meaning in the Oracle text. This means less, so if you search for "word1-word2" score by searching "word2" in the document and who subtracted from the score obtained by searching for "word1" in the document. If you want to treat the hyphen as a regular character without meaning of the Oracle text then you need to escape by placing a backslash immediately seized. Similarly, the ampersand has a special meaning; This means and. So, if you search for 'word1 & word2' will be produced documents with the "word1" and "word2" in there. Please see the demo below.

  SCOTT@orcl_11gR2> -- test environment:
  SCOTT@orcl_11gR2> create table your_table
    2    (clob_column  clob)
    3  /
  
  Table created.
  
  SCOTT@orcl_11gR2> insert into your_table (clob_column)
    2  values ('21-12345')
    3  /
  
  1 row created.
  
  SCOTT@orcl_11gR2> insert into your_table (clob_column)
    2  values ('21 & 12345')
    3  /
  
  1 row created.
  
  SCOTT@orcl_11gR2> insert into your_table (clob_column) values
    2  ('some other data you do not want just for testing')
    3  /
  
  1 row created.
  
  SCOTT@orcl_11gR2> begin
    2    ctx_ddl.create_preference ('your_lexer', 'basic_lexer');
    3    ctx_ddl.set_attribute ('your_lexer', 'whitespace', '-');
    4  end;
    5  /
  
  PL/SQL procedure successfully completed.
  
  SCOTT@orcl_11gR2> create index your_index
    2  on your_table (clob_column)
    3  indextype is ctxsys.context
    4  parameters ('lexer your_lexer')
    5  /
  
  Index created.
  
  SCOTT@orcl_11gR2> select token_text from dr$your_index$i
    2  /
  
  TOKEN_TEXT
  ----------------------------------------------------------------
  12345
  21
  DATA
  OTHER
  TESTING
  WANT
  
  6 rows selected.
  
  SCOTT@orcl_11gR2> set define off
  SCOTT@orcl_11gR2> select *
    2  from   your_table
    3  where  contains (clob_column, '21\-12345') > 0
    4  /
  
  CLOB_COLUMN
  --------------------------------------------------------------------------------
  21-12345
  21 & 12345
  
  2 rows selected.
  
  SCOTT@orcl_11gR2> select *
    2  from   your_table
    3  where  contains (clob_column, '21 & 12345') > 0
    4  /
  
  CLOB_COLUMN
  --------------------------------------------------------------------------------
  21-12345
  21 & 12345
  
  2 rows selected.
  
  SCOTT@orcl_11gR2>
  

• How to associate the same contact with two different accounts to import

  Hello
  
  (1) I want to associate the same contact (ex: person) to two different accounts (account A and account B) import.
  
  I tried with the Unique ID from outside Contact but it is accidental and in the end, I am able to associate this Contact with a single account.
  
  
  
  (2) I also can't records to import custom object with the same name through the import process.
  
  
  
  Could someone advice on the same.

  With regard to your questions:

  (1) currently, it is not possible using the Import Wizard. However, it could be done using web services.
  (2) the name must be different.

• How to mount the afp share with two different users

  I use Terminal to mount three actions of my SIN.  I want to mount a mount point in my user folder.  One of the actions has a user name and password, so that the other two mount as a guest.  I can ride through Finder > to connect to the server without any problem, but this goes to /Volumes and not in my user folder and also indicates the actions on my desk.  I use to get the following:

  mount_afp o nobrowse 'afp://username:password@Servername/Share1' ~/Mount point/folder 1 /.

  This example goes up the part properly, but when I run the following command:

  mount_afp o nobrowse 'afp://Servername/Share2/' ~/Mount point/folder 2 /.

  I have the following error:

  mount_afp: AFPMountURL returned error-5023, errno is-5023

  This happens if I invert the controls as well, for example to get the comments share first, then the part of the user.

  Am I missing something?  I can't get different actions for different credentials?

  OS X has no Linux - bind option that allows multiple points of Assembly of nickname for the same file system.

  OS X allows a file system mounted only once.

  I suggest you get the file normally, system create an OS X Alias, can put copies of this Alias in the account of each use.

  And/or create symbolic links that point to the real mount point.

• Can I run outlook and outlook Express on the same computer with two different e-mail addresses?

  My e-mail with outlook express and my wife with outlook email address.

  Yes. You can run them with the same email address as well.

• Wait for the event begins with SQL * Net message from client-time wait 178577 units

  Hello
  
  I'm watching events waiting for a request from long time in TOAD.
  I start the query on an instance of TOAD, and open the browser to log on to another instance.
  But I am surprised to see that in "TOtal expected" on the RIGHT part->
  SQL * Net message from client is the longest time and is already - > 178577 units while I just to start the query.
  
  Considering that, in the current waiting she shows DB file scattered read correctly for a few seconds.
  
  Please suggest.

  user8941550 wrote:
  Hello. No explanation for this... :-(

  Hello

  people work here, you don't know?
  I think Tom Kyte explains it well enough. This wait event is linked to your session database waiting for the guest to say to do something.

  So it is not related to the database, but to your application.
  Also as it is a wait of session event you might have had your session inactive for some time (do nothing)

  If you want to check the waiting events correctly I suggest using tkprof and start a new session in SQL more as shown by Tom Kyte in the link I posted.

  Then, run your query in sqlplus setting track and pull it out as soon as your statement is completed.
  that is to say:

  -- myest.sql
  alter session set events '10046 trace name context forever, level 12';
  SELECT ... -- your query here
  exit
  

  Run in sqlplus in this way:

  sqlplus user/password@db @mytest.sql
  

  Then check with tkprof.

  Kind regards.
  Al

• Can I open Apex application for the same user with 2 different sessions.

  Hello
  
  I have a problem with apex application session.
  
  In a new browser window, I logged in with user name and password and I get in the application of the apex.
  I want to open the same application in a separate window and I connect again.
  but when I return to my previous window to do something it prompts me to the login screen.
  I'm losing the session. Is there a way to keep the two live sessions.
  
  Any ideas?
  
  Thank you.
  
  Ally.

  See this thread for a possible idea... : Re: two active sessions in the two tabs of the browser - how?

  Thank you

  Tony Miller
  Webster, TX

• Fill in the select list with two different queries depending on the user's group

  Hello
  
  I finished my first production application using apex. I have a Select list that takes its values from a sql query. Now, I want this different query for each user based on the group. Basically each user sees only the projects they are responsible - that works fine. But I want all the people of the admin group to see all the projects - how can I do this?
  
  Thank you very much!!!
  Henrik

  Hello

  Try this

  SELECT s.caption || ' - ' || s.sapnr display_value
        ,s.sharedservice_id return_value
  FROM   sharedservices s, sharedservicelead l
  WHERE  (   s.sharedservicelead_id = l.sharedservicelead_id
          OR s.ssldeputy_id = l.sharedservicelead_id
         )
  AND    l.username = :app_user
  UNION
  SELECT s.caption || ' - ' || s.sapnr display_value
        ,s.sharedservice_id return_value
  FROM   sharedservices s
  WHERE  HTMLDB_UTIL.get_groups_user_belongs_to(:APP_USER) = 'capacitymanagement'
  

  See you soon

  Ben