Hard drive crash, need to uninstall old and re - install new Mac

Similar Questions

• I installed an external USB connected hard drive Seagate, it slowed the computer and check the new disc repeatedly

  Hello

  I installed an external USB connected hard drive Seagate to copy some movies and pictures of my HP laptop with Vista, but it became a big problem. It slowed the computer and check the new disc repeatedly. Then it wouldn't start without the external drive at all but it was working fine once he was conducting with the external hard drive. So thinking I can outsmart the computer, I uninstalled the drive from Control Panel. Now it primer not at all. The computer lights up briefly and then goes out of itself almost immediately, is there a solution to this? Thank you

  SOM

  Original title: startup problem

  Hi SomBhattacharya,

  Please try the possible fix following first thanks to Carey Frisch:

  1. open the BIOS of the motherboard.
  2. find where it says Priority Boot Device, then select CD/DVD-ROM 1, 2nd Hard Drive and disable all the rest.
  3 find somewhere in the BIOS where it says BOOT USB, Wake on USB, etc. and disable all unnecessary options.

  And second if it does not help, you can try the following with Blue Michael:

  Local Geek Squad had me intentionally set the BIOS to the correct order, then re-order and SAVE.
  It worked, even if the list of the BIOS was always in the right order.

  I hope this helps!

• My hard drive crashed need to get a copy of Vista basic to re - charge on the new hard drive

  My hard drive on my Acer Aspire 5315 has crashed. I put in a new hard drive but I have not saved copy of Windows Vista Basic supplied with the computer. I need to know how I can get a copy of Vista Basic to recharge with the product key on my computer

  Contact them Support technique Acer and ask for a disk of Vista installation for your computer model. Boulder computer Maven
  Most Microsoft Valuable Professional

• HARD drive crashed, need for Vista OS.

  Hello

  I'd appreciate help with the following problem.

  I bought a new series, G5000 HP Laptop with Vist pre insalled a few years ago and had used the recovery disk HARD to re install the OS a couple of times when the problems occurred.

  The HARD drive is now broke and is unrecoverable, and I installed a new HARD drive, but I don't have an OS disk, even if the product is registered.

  I don't want to buy another copy of Vista, because I already have the product code, I'm computer savvy, but do not know what the next move is, Ms. will provide a floppy disk to allow me to re install the operating system.

  Appreciate any help,

  Thank you.

  Hello

  In the same way that it is possible to create a disc of the retail of Windows 7, use this to perform the installation, and then use the OEM windows 7 activation key from COA label, the same process is possible if your laptop comes with Vista.  A complete description (including links to downloads of Vista Image) of it on the following link.  The Image you use must be the same as the version initially installed on your laptop.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  Software extra and you may need drivers to find from here.

  Kind regards

  DP - K

• Dell Inspiron hard drive has failed. After replacement and re - install Windows Vista, I noticed that the product key sticker is removed, and I can't read it.

  Hard disk of laptop DELL Inspiron my wife is dead! I have replaced the hard drive, but now realize the sticker with the activation of vista is so worn that I can't be a part of the code. Can I do short of buying another license?

  original title: code of Activation of Windows Vista

  If your tile is deleted, unreadable, then you must contact the manufacturer of your computer that is applied on the computer.  They can provide you with information about key details of the product.  -Karena R (Support Engineer)

  Activation of the FAQ

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

• my laptop was preloaded and hard drive crashed. Do I have to buy a new drive to install the new hard drive?

  My laptop that I bought in January this year has been preloaded with windows 7 starter. I don't have the installation disc. What I have to buy one in order to install the new hard disk

  Have you given up on trying to resolve why the computer won't start? You will need to provide more information about what happens when you try to start the computer. There are several reasons for which a computer does not start and a damaged operating system is only one. Please describe in detail what happens when you press the button.

  Remember that a computer bought in January 2011 is very likely still covered by the warranty.

  In the event of failure of the BSOD (Blue Screen of Death) system, if that's what you see, for most users there is sufficient time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  You can get the computer to boot by following the advice in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

• HARD drive crashed, need to install vista on the new drive. Pc product key is dispelled. Is this possible?

  I may be able to start my drive enough to get something out of windows itself, but the drive does often not at all. The recovery partition is toast as well. It is a true copy of Vista 32 bit Home Edition, but the key on the bottom is almost completely dissipated, essentially unusable. How should I proceed?

  Please see: How to replace lost Microsoft software

• Hard drive crashed, need to find out if my vista is 32 or 64 bits of order recovery disks. How do I do that?

  Cannot start until whether 32-bit or 64-bit.

  Hello

  When you contact the manufacturer of computrer they will ask you a serial number of your machine fron the case

  to verify that you have installed

• Hard drive crash, have no CD, they have a product key what do I do

  My son gateway computer hard drive crashed. I'll have to buy a new hard drive.  I don't have vista or bridge or other recover CD.  I have the license of vista product key.  I don't want to buy a new copy of vista.  Gateway wants to charge us just to ask a question, since the machine is out of warranty.  Ideas, suggestions? Is there an ISO somewhere?  The machine was Vista Home Premium 32-bit. Thank you.

  You don't need to buy a new copy of Vista; an unnecessary expense.

  Follow the advice of Carey to communicate with the gateway: http://support.gateway.com/support/default.aspx

  And read this:

  Vista DVD:

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good DVD (not Dell, HP, etc.) Vista.
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• My hard drive crashed, so I bought another, an SSD. I installed Microsoft Office 2007 on the new hard drive, but I can't activate it

  My hard drive crashed, so I bought another, an SSD.  I installed Microsoft Office 2007 on the new hard drive, but I can't activate it because he said I used the licensed maximum facilities.  How can I cancel the office installed on the hard drive crashed, so I can activate it on my new hard drive?

  Use for phone activation reactivate:

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

• My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My lightroom was great before the crash to work and I have a lot of work still pending.

  You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

  The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

• My hard drive crashed and was replaced. I can't uninstall CS6 Master Collection to reinstall.

  Hey everybody!  I am new to this forum and would like some direction. My hard drive crashed and was replaced. I was able to recover some of the old drive and the technician put my apps on the new drive but they are not operable (error 1) and require reinstallation. For CS6 uninstall programs is found on the disk (they are just aliases"). They installed the new 10.11 OS on my replacement drive.  I have my serial number and installation disks, but can not uninstall the product safely. I tried Adobe Creative tool for cleaning of clouds, but applications are still there. I also tried to reinstall on the existing master CS6 Collection, but it is hindering and freezes. Help, please! I would be so grateful! Thank you!

  Hello

  Try to delete the files listed below if you want to remove adobe CS6 apps of your machine it should help:

  1-go to: Finder > Applications > utilities > (delete these two files - creative cloud Adobe and Adobe Application Manager, as appropriate)

  2 - right click on the Finder icon, then select the "Go - To" folder.

  3. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")-~ / library (it will open the folder of the user's library.)

  ~/Library > application Support > Adobe (this trash folder)

  ~ / Library > Cache > Trash all Adobe files and folders from here

  ~ / Library > Preferences > trash all Adobe files and folders from here

  4. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command, and then click 'Return' key. / Library (it will open the library system folder.)

  / Library > application Support > Adobe (this trash folder)

  / Library > cache > Trash all Adobe files and folders from here

  / Library > Preferences > trash all Adobe files and folders from here

  5 - restart the machine and empty the trash

  6 - Download and reinstall CS6 from here: download Creative Suite 6 applications

  Let us know if that helps.

  Kind regards

  Bani

• My hard drive crashed how do I uninstall and then reinstall photoshop cs6 extended

  My hard drive crashed. I can uninstall and then reinstall photoshop cs6 extended without using

  My second download? And what process is associated. I have the serial number, regis day etc.

  Yes.

  If you use a new hd, ask for activation count reset: contact adobe support by clicking on the "still need help" as soon as available, https://helpx.adobe.com/contact.html

  then dl, install and activate.

  If your hard disk is unchanged, dl, install and acivate.

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• My hard drive crashed and he was replaced. However, Windows 7 Premium replaced instead of Windows Pro. I now need a product code for windows 7 Premium. Can you help me, please?

  Original title: product key

  My hard drive crashed and he was replaced. However, Windows 7 Premium replaced instead of Windows Pro. I now need a product code for windows 7 Premium. Can you help me, please?

  See instructions to reinstall the correct version:

  How to: What are my options for Windows 7 reinstall media?

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.