Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

Similar Questions

• Hardware malfunction: NMI Parity error

  Screen blue/hardware malfunction/call your provider of support material / parity memory check error / NMI:parity / this happens more frequently

  The RAM in your computer seems to be failing. Run the memory in memory diagnostic tool by typing in the search box of the start menu by pressing Enter.

  Use the scanner on this site http://www.crucial.com/ to find out what type of memory, you have to buy if it needs to be replaced.

• NMI:Parity error blue screen

  I have problem with blue screen with any program at any time. It is as it should be a hardware problem. When I run the Diagnostics on my computer everything seems to check out OK.

  Hello drichardson3,

  ·         You get this error blue screen randomly on your computer?

  ·         What exactly is the diagnostic test that you have run on the computer?

  The checking of NMI Parity error is an error related to a defective hardware on your computer. This is mainly caused by a faulty RAM.

  To resolve this problem, you may need to check on the RAM, I suggest you contact the manufacturer of your computer to check the hardware that does not work properly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• .... MALFUNCTION OF THE EQUIPMENT... CALL YOUR PROVIDER OF SUPPORT MATERIAL... THE SYSTEM STOPPED... NMI: CHANNEL CHECK / IOCHK...

  After the execution of 4/5 in my system hang and sometimes, it's the blue screen and message showed...

  HARDWARE MALFUNCTION
  CALL YOUR PROVIDER OF SUPPORT MATERIAL
  THE SYSTEM STOPPED *.
  NMI: CHANNEL CHECK / IOCHK
  Please, I beg you. someone tell me how to solve this problem...

  I would recommend that you contact the manufacturer of your computer and give them the error code, as shown.  The error means there is a serious hardware problem with your computer, it is not what Microsoft or Windows caused or can solve.

• Hardware malfunction * the system stopped *.

  Had Windows reinstalled on Dell Inspiron 1318, computer Vista laptop was working fine, then during use, the blue screen appeared with this message...

  • Hardware malfunction
  • Call your provider of support material
  • NMI: channel check / IOCHK
  • The system stopped *.

  The computer does not stop! What should I do?

  http://support.Microsoft.com/kb/315223

  The article above says that it applies to XP; but the error seems to be related to the material.

  See you soon.

  Mick Murphy - Microsoft partner

• XP - error: the system cannot find the specified file.

  I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

  Hello
   
  
  1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?
  2. are you able to boot to the desktop now?
  
  Method 1.
  Run Disk Cleanup and disable the security software and t hen try the same installation and check.
  Want to t he article below for disk cleanup:
  http://support.Microsoft.com/kb/310312
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• Error message "an error the system cannot find the file specified" when you use Bitlocker

  Original title: Bitlocker to go not accessible by car usb

  Here's the short of it: I decided to use Bitlocker To Go on my USB drive, and while he was to encrypt the drive I plugged a USB DVD - RW drive (it

  s a netbook) and then I got an error message in the Bitlocker program that says "an error the system cannot find the file specified."  I closed the error message and open the Bitlocker Unlock program, put my password and press on unlock and now it only that sit there and spin and the light flashes on my Batman of Seagate HARD drive as it is accessed.  The internal data of the car do not make the same sound, as he did while he was being... just encryption sounds like there are in an infinite loop.  The disc is good and has no errors, and I scanned with SeaTools.  I have a lot of important data on this drive, and I really don't want to lose anything.  Help!

  Hello 5thgear,

  Thank you for the question!

  I'm sorry to know that have problems you with Bitlocker. I get it right you get an error message "an error the system cannot find the file specified" when you run the bitlocker encryption.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Click on the link below.

  http://blogs.technet.com/b/ASKCORE/archive/2010/08/04/issues-resulting-in-BitLocker-recovery-mode-and-their-resolution.aspx

  Answer to us if you are having problems with bitlocker or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Error: The system cannot find the specified file. (0 x 80070002)) While performing a regular system backup

  Original title: Backup has encountered a problem

  I just tried my regular backup process and I received the following message:

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Outlook file. Error: (the system cannot find the specified file. (0 x 80070002))

  This is not the first time that I received - in the past, I have simply ignored.

  I had "worried" and thought I should come to the 'experts' to get advice.

  Any ideas?

  Thank you very much

  Hi Barbra Wagner,

  This problem may occur if you back up a library that contains custom folders that are located under your user profile.

  Could you please let us know about where are you trying to save?

  I suggest you check the steps in the section: resolution of scenario 1 of the following article and check.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281/en-us

  Please answer us on the State of the question to help you further.

• BlackBerry Smartphones "Input system error" "the system is restarted.

  I have been using my 9000 "BOLD" for 8 months, it has started to display the message "system error" "the system is restarted.

  When I push the internet browser, but now when I press "check spelling" on a sms message or email I am composing.

  I tried a hard and soft reset, but the problem persists.

  This problem can be solved without exchanging the phone?

  I've updated my "BOLD" using the Blackberry Desktop Manager on my computer, it took about 20 minutes, because it seems to read, save, stripout and reloading, which seems to have solved the problem.

  Some homescreen icons end up in a different order, but you can move it back.

• Error: The system cannot find the specified file (0 x 80070002), when you perform the backup of Windows.

  Original title: missing for InputPersonalization file

  I used the Windows 7 backup utility for several years and recently it has begun to generate the following error:

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\InputPersonalization file. Error: (the system cannot find the specified file. (0 x 80070002)

  I checked with Windows Explorer and confirmed that this file does not exist in this way. Instead, the file exists in the path under my local account.

  How can I stop this error? In addition to a clean backup, I like to keep the overall system as clean as possible.

  Hi Jeff,

  Thanks for joining us.

  Please visit the following link to resolve this problem:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281/en-AU

  Scenario 1 is similar to the issue that you are facing. However, you can also try the steps outlined in the other scenarios and see if the problem is resolved.

  Please, try the steps and get back to us with the State of the question.

• Backup has encountered a problem in file C:\Users\Laura\Saved backup sets. Error: (the system cannot find the specified file. (0 x 80070002))

  How can I stop this error after completing a back-up?

  Hello

  Thanks for posting the request in the Microsoft community forums.
  I understand that you are facing a problem when saving the file. I will definitely help you with this.
  Please answer the following questions.

  1. where exactly you are trying to save the file?
  2. what anti-virus software is installed on the computer?
  3. don't you make changes on the computer before the show?

  This problem can occur for the following reasons:

  · The computer stops responding.

  · The copy operation stops.

  To resolve the error "Backup has encountered a problem during backup of the file C:\Users\Laura\Saved games. Error: (the system cannot find the specified file. (0 x 80070002)) "on the computer, you can try the following steps:

  See the steps in the link and check:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

  Hope this information helps you. If the problem persists, feel free to let us know. It is our pleasure to be of service.

• Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002))

  At the end of the new backup, the following error message appears; Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002)) and files are the following:

  Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\Searches file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\Guest\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\Guest\Searches file. Error: (the system cannot find the specified file. (0 x 80070002)

  Any help to help solve the problem and remove these files unless they need to be backed up. I tried and failed to find the files. Please note that windows 8 pro had cleaned originally had windows Vista, even I did find something on the error code: error: (the system cannot find the specified file. (0 x 80070002))

  Hey Amer,

  You can ignore this error message. You would usually encounter this problem if the Windows Backup tries to back up files in folders LocalLow, Contacts and research and these files are not present on your computer.

  Well, you also have an option to create or exclude files missing, listed in the error message.

  If you want to exclude this folder then please refer to the following steps.

  (a) in the backup section, click on "change settings".

  (b) in the dialog box Configure the backup , click Next.

  (c) in the 'you want to save ' dialog box, click on 'Let me choose ', then click on 'Next '.

  (d) navigate to the user profile folder displayed in the error message and clear the check box next to the folders.

  (e) save and exit.

  Hope the helps of information.

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.