Has anyone install version 9.0 of the OfficeJet Pro K8600 on Windows XP SP 3 driver?

I have successfully loaded down the Basic and full versions of this driver.  The two do not settle with the error that Setup is looking for USB.inf in c:\WINNT\inf.  The only problem is that there is no file on Windows XP - have checked more than one box.  Also, there is no such folder in \WINNT...

It seems that this installation is broken, but...

The installation works on Vista and Windows 7 (after a few patches/updates).

Any suggestion or help would be appreciated.

Thank you

Bill.

I hate to reply to my message, but I found a solution.

I downloaded the version 'Corporate' drivers.  This is a very limited edition of the software, compared to what I had tried to install earlier.

Once it is not compressed and available on the system, I then could 'Add you a printer' and find the suitable driver for what XP (32 bit) planned.

Detective Conan...

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

    Cannot find a driver for the Officejet Pro 8500 on Windows 10

    Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

    Reinstall the driver of windows 8.

  • Re: There is no driver for the Officejet Pro 8500 for Windows 10?

    Tried to load the complete package of windows 8. did not work.  Tried it on 2 10 Windows - had already installed win10 and the other has been upgraded to win7.  I REALLY need to be able to scan.  Any suggestions out there?

    Thank you

    Welcome to the HP community @seamaster805,

    I came across your post about the problems you're having with installing drivers of Windows 8 on Windows 10, and I wanted to stop to help out.

    There are 10 Windows drivers available for your Officejet 8500, and you must install the full features drivers correct and the file of the software for it to work. See the image below and the link to get there. Try to install again and if you are having problems or errors during installation, let me know please and I will surely do my best to help you!

    Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

    Thank you

  • Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

    Has anyone invented a way to get the emails that went to the wrong email address until the wrong person reads?

    To answer your question, you have to assume that once you have sent the email that it cannot be recovered. Think of it as dropping an old letter in a message box - you can't get it back once it is in the message box.

    The reasons are not only technological - it security, privacy, legal and political might be too (e-mail can cross multiple international borders).

    One hand practice also, what you want would be difficult because the emails will usually quickly reach their destination server and so can be collected by the recipient of email from this server as soon as sound here.

    By ensuring that you are writing your emails correctly in first place is the best.

  • photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

    photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

    If you want any help here, you'll have to tell us what the error message.

    Which report you errors to?

  • a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

    a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

    Check if you have picked up malware in your travels.

    I see a lot of recommendations here for programs such as -

    Malwarebytes' Anti-Malware
    http://www.Malwarebytes.org/MBAM.php

    SuperAntispyware
    http://SUPERAntiSpyware.com/

    Check in safe mode.

    Vista advanced boot options
    http://Techblissonline.com/Vista-advanced-boot-options/

    See if you can isolate a possible cause.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

  • 4.3 "touchscreen of the Officejet Pro 8600 Premium could be established in the Spanish language? Help me!

    I just sent an e-mail to HP support, but unfortunately they never told me anything. I need to buy a printer for trade muy and I would like to acquire the Officejet Pro 8600 Premium, but I don't know if his screen 4.3 "touchscreen could be implemented in the Spanish language. So my question is: can the Officejet Pro 8600 Premium touch screen set up in the Spanish language? Please, ¡Anyone help me!

    Yes, you can.

    The 8600 Officejet Pro may be installed in different languages.

    I provide and example of this:

    • This screenshot is when you select the paper size for copying:

    And another example:

    • It is the main window of the façade.

    * Don't forget to click on the stars KUDOS say thank you

    * also click on the Solution button if your question is answered.

  • OfficeJet Pro K8600 install SBS2003

    What drivers?

    I had an HP 1220C printer, at the same time, connect to the DLink, fixed IP print server.   Which replaces with OfficeJet Pro K8600, USB, same DLink, IP and network.

    The CD is not drivers for SBS2003.  HP Web site has drivers for Windows Server 2003, I have downloaded and run the EXE file, screen says configuration, about five steps, no errors, no prompt to connect, etc..  If I add printers, I see K8600 HP has been added to the list, but no driver installed.  I can see all the files I downloaded and extracted, but where are the pilots?  Should which driver I use on the SBS2003?  XP?  Vista?  DOT?  Although HP offers http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=1005&lc=en&dlc=en&cc=us&lang=en&product=3434447 (consumer products?) pilots say that they do not support Windows Server 2003.  I'm trying to relieve on manually, but which driver?

    Turns out be the DLink print server - he had a USB1 instead of USB2 port.

  • OfficeJet Pro l7580 on Windows 8: always impossible to install driver

    Reopening of the question of: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-l7580-on-Windows-8-canno...

    Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

    OfficeJet Pro l7580 (connected ethernet)

    Windows 8 64 bit (clean install)

    Driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110039-1&cc=us&dlc=en&lc=en...

    Everything worked fine on Win7 64 bit

    Print with 8 default windows driver

    When you install the driver, the driver installation tells me to "uninstall L7300.

    I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

    I've tried it on 2 computers different windows 8, with the same result.  The driver seems to be fairly broken

    Hi mcevoys,

    I understand that they are freshly installed operating system, but in order for me to isolate as a cause as possible, should be done on at least one of the computers. If you do not want to perform the update to help isolate the problem, then you will need to contact support to see what they can do to help you get this printer is installed on your computer. I would like to know what you want to do?

    Do a Refresh of Windows 8:

    1. hold your mouse at the bottom or at the top right of the screen (if you have a touch screen, you can drag your finger to the right of the screen to the left) to bring up the bar of charms.
    2. click on settings.
    3. click on "change computer setting" below.
    4. click on general.
    5 scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
    6. who should start a wizard that will take you through the update process.
    7. install the printer on your computer

  • After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

    After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

    Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

    After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

    Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

    Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

  • Printing envelopes on the Officejet Pro 8600.

    Greetings.

    I'm looking for instructions on printing of envelopes with success on the Officejet Pro 8600.  The printer tries to feed a printer, but stop feeding envelopes because they are pulled in.  Using plain old monarch # 10s.  I realized I have to disable the detection auto-fonction support.  Help.

    Thank you

    Hi BishopB;

    Hope you are doing well and I'm sorry that you are having problems.

    This document shows how to load the envelopes to the printer.

    http://support.HP.com/us-en/document/c02890475

    This article will provide you also with the support of the envelopes by this printers;

    http://support.HP.com/us-en/document/c02858465

    It can be useful;

    RobertoR

  • lines down the officejet pro 8600 copy

    just got the officejet pro 8600 its great except when I copy there is a line down the Middle, but not when I print faxes reception could be tape somewhere?

    This happens when you use the automatic document feeder to copy or scan?  This is probably a place on the strip of thin glass used for scanning with the ADF.  See the Solution 2, step 5 in this document.

  • OfficeJet Pro 8600 Plus: is the Officejet Pro 8600 wireless compatible with the new standard AC dual routers.

    ISP is the Modem upgrade to DOCSIS 3.0 model. My current router, Linksis E 3200 is not fully compatible with the new modem, I have to upgrade to a model of AC Smart WiFi dual band.

    The wireless in this 8600 printer is compatible with the standard AC. If this is not the case, can it be upgraded via download to make the wireless compatible. Top of my head I have think.

    The wireless connection in the Officejet Pro 8600 is compatible with 802.11n connection on the 2.4 Ghz band.  Check your new router (or candidates for a new router), most routers AC will be also in charge of N connections.

  • Copy and scan with the Officejet Pro 8100

    Can I scan and copy with the Officejet pro 8100?   If Yes, how, is not in the manual.

    LON

    The Officejet Pro 8100 is a printer only, it is not a multifunction device.

    You can find the specifications below:

    http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=4323241&JumpID=oc_r1002_usen_c-001_r0002

  • the officejet pro 8600 can connect more than one wireless router?

    the officejet pro 8600 can connect two separate wireless routers?

    Hi Thetinman,

    No, it is not possible that you can be connected to 1 router at the same time.

Maybe you are looking for