It is possible to solve the problem with this update?

Similar Questions

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• What is malware and how do you know if it affects your pc? Is it possible to solve the problem?

  What is malware and how do you know if it affects your pc?  Is it possible to solve the problem?

  Definition of malware from Wikipedia.org

  Malware, short for malicious software, is made up of programming (code, scripting, active content and other software) designed to disrupt or deny the operation of gathering information that leads to the loss of privacy, or operating, access resources system and other abusive behavior. The expression is a general term used by the professionals for a variety of forms of software code or hostile, intrusive, or annoying program.

  One of the best (and FREE) ways to prevent it from running Microsoft Security Essentials, which will scan your (s) and eliminate the bad guys you can be picked up when you surf, opening files is sent to you etc..  Of course security software is only good if it updates often with the newly found bad, but MSE update daily and you can set to sweep once per day or more.

  http://www.Microsoft.com/en-us/security_essentials/default.aspx

  I suggest that you download and install, then let run a FULL scan and see what it finds.

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• What is the problem with this Forum? Why Adobe taking so long to reply to messages?

  What is the problem with this Forum? Why Adobe taking so long to reply to messages?
  It is in fact 'specific' Forum of Photoshop.
  I usually come back another Adobe forum responses quickly.

  Chime.

  Hi people,

  For what it's worth, there are several of us who try, in addition to our regular work, to keep an eye on two other forums.  Quite simply, we care about the product and try to make sure that we give our customers the best experience as possible.  Plus, what better way to hear about your weak points in order to solve them.  But, as Mylenium and Christmas as well stress this, the forums are officially a user experience.  If you need help fast or official, it isn't the best place to do it.

  Regarding your question of Arab, Rahzah, I answered in two different threads and would be happy to help you with your problem.  Please choose a single thread and stick with it. two tabs is a pain.

  Thank you
  David

  PS - some of us do check the forums on our time, as I did last week at the launch while I was on vacation.

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• What is the problem with this pl/sql code?

  What is the problem with this statement of the cursor? I am getting PLS-00341 error for her:

  CURSOR cur_rsource(p_sql_stmt IN VARCHAR2) IS
          SELECT plan_table_output FROM v$sql s, table(dbms_xplan.display_CURSOR(s.sql_id, s.child_number)) t WHERE sql_text LIKE '''%'||p_sql_stmt||'%''';

  How to solve this problem?
  
  Thank you
  
  Published by: PhoenixBai on December 14, 2009 14:05

  I don't have time right now to study exhaustively, but for me his vomit ORA-00942 table or view does not exist on this line:

      SELECT sql_id, child_number into tmp_sql_id, tmp_child_number
           from v$sql where sql_text like sql_statement||'%' and sql_text not like '%v$sql%';
  

  I am able to select from v$ sql in normal SQL as user I am compiling as, so don't know why it's complaing.

  Anyone know if there are certain restrictions on access to the views v$ through PL/SQL?

  EDIT: http://www.dbasupport.com/forums/showthread.php?t=22299

  Access to the views of $ v seems to be through a role - try giving explicit access to it.

  As SYS, you must grant select permissions on V_$ SQL (V$ SQL is synonymous with V_$ SQL) to your owner of the procedure. Just tested on my system and it allows him to compile.

  Published by: Cyn on December 14, 2009 10:30

• What is the problem with this URL

  Can someone tell me what is the problem with this url

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:&P3_JOBID.,3, null,||:APP_SESSION'));

  It gives me a value for P25_PG, that is to say 3 but always sets P25_JOBID to 0
  
  Gus

  Hello Gus,

  It looks like point P3_JOBID has no value for the rendering of the page.
  If the value is set subsequently, you can try the following change

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:'||:P3_JOBID||',3, null,||:APP_SESSION'));
  

  But the part at the end

  ||',3, null,||:APP_SESSION'
  

  Wil do nothing because you give only 2 items in the list separated by commas of the page elements you want to submit. Everything after the second comma in the comma separated value list is of no use for the url of the apex.

  As additional info, the URL of the Apex is built like this:
  >
  1 - application ID or alias
  2 - page ID or Alias
  3 - session & SESSION. : APP_SESSION
  4. application (for example, PRINT_REPORT = REPORT_1) & ASK. : REQUEST
  5 - debug (YES or NO) & DEBUG. : DEBUG
  6 - cache framework

  APP - clear the cache for the entire application
  SESSION - clear the current user session cache
  PR - Reset pagination
  x - clear the page cache x
  -empty the cache for the element y

  7 - separated by a comma list of items on the page
  8 - the list of values separated by commas
  9 - mode printer friendly (YES or blank)

  f? p = & APP_ID.: 1010: & APP_SESSION. : & DEBUG. : RP, 1010:P1010_ITEM1, P1010_ITEM2, P1010_ITEM3:A, B, C
  >

  Kind regards
  Kees Vlek
  -----
  Company: http://www.orcado.nl
  Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
  Twitter: http://www.twitter.com/skier66
  If the answer to question please change replied and mark the appropriate post as correct / helpful.

• What is the problem with this WHERE statement?

  What is the problem with this WHERE statement?

  < cfquery datasource = "manna_premier" name = "kit_report" >
  SELECT SaleDate,
  TerritoryManager,
  Distributor,
  DealerID,
  Variable,
  US_Dealers.ID,
  DealerName,
  DealerAddress,
  DealerCity,
  DealerState,
  DealerZIPCode
  Orders, US_Dealers
  WHERE US_Dealers.ID EQ DealerID AND SaleDate BETWEEN #CreateODBCDate (FORM. Implementation) # AND #CreateODBCDate (FORM. End) #.
  ORDER BY SaleDate
  < / cfquery >

  It's driving me crazy!

  Syntax error (missing operator) in query expression ' US_Dealers.ID EQ DealerID

  You accidentally use the CF equals operator: "EQ".

  Instead of MS Access: «=»

  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver]...

  in a query expression. AND SaleDate BETWEEN #10/1/2009 #-October 18, 2009 #'.

  I don't see how CreateODBCDate() would produce these values.  But maybe it's just a quirk of the error message?

• Could someone explain to me what is the problem with this refined expression?

  Hi, could someone explain to me what is the problem with this refined expression

  faultCode:Server.Processing faultString:' unable to invoke CFC - regular expression malformed ' ^ [0-2][0-9][/][0-1][0-2][/][1-2][0-9]{3}+$ '.»»

  Thank you

  I think that the + should not be there. Do you have a match?

• Everything has been done to solve the problem with the FileVault have to be disabled in order to get the lights on the keyboard turns on at startup on the macbook pro?

  Everything has been done so far to solve the problem associated with the FileVault have to be disabled in order to get the keyboard lights turn on at startup on the macbook pro?

  I use FileVault. The keyboard on my MacBook Pro lights work perfectly. I'm under El Capitan 10.11.3.

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• How to solve the problem with the BSOD errors of memory?

  Original title: Windows 7 BSOD "memory management".

  So basically, I made a similar post about 3/4 weeks ago and only received assistance to a certain extent.

  My problem is that I get a BSOD "memory management".
  Dumps are here for you to watch (you need to perhaps copy and paste the link in your URL):
  https://SkyDrive.live.com/redir?RESID=871E879B9D5671EC! 186 & authkey =! AL1N44iVMCM3JFw

  My OS is Windows 7 Pro.

  There are a few changes I made in recent weeks. Before, I had a Netgear USB wireless adapter and when I had that my PC had this crash at least once a day. But I now have a TP-Link wireless card. However, my PC crashes again every 3 days, no more and no less. Weird huh?

  Record PC hardware:
  Power supply 650W Powercool,
  Motherboard Asus M5970 Pro
  AMD processor with Six cores bulldozer 6100 3.3 GHZ
  Corsair Vengeance 8 GB 1600 MHZ RAM.
  Western Digital drive hard 500 GB.
  Western Digital 250 GB hard disk
  SAPPHIRE RADEON HD 7750 1 GB graphics card

  I also tried to buy the new RAM, but this did not improve the situation. I still had the accident itself, so I changed back to my old RAM and got a refund because the question is obviously not with the memory RAM (so please not a single mention to run the memtest).

  In addition, with the second disc HARD (250 GB) connected inside with my XP on, sometimes I hear it make a noise as if it is off, which is obviously because of the PSU not put enough power, I read about the BSOD memory management can easily be solved by upgrading the PSU and just want to collect some more experienced opinions before eventually trying this , I really don't want to buy a whole new PSU and then send it again that the problem is still happening (like I did with the RAM).

  
  I arrived at my own theory that perhaps I may need to lower the frequency of the RAM in my BIOS, or maybe overclock. If someone could help, it would be great. Thanks to all in advance

  The trickiest part is the every three days, not more not less. I shouldn't have overlooked than before.
  This could possibly come from a program that tries to access Windows or the
  Internet in this time (automatic update?). Perhaps something to do with your wireless network card, or even something like your anti-virus.

  "Hmm maybe it's the question then? the RAM is running at 1600 mhz, and even if my processor is a 3.3 Ghz, it is still running at 3.6 Ghz (even if I haven't myself)"
  Ooops sorry :) - looks like I got confused somehow your message with one using a Phenom 945.
  Your processor can execute with a max of 1866 Mhz RAM, but your mobo still has a 1333 Mhz max
  If the system is not what OC'd
  The 3.6 Ghz is "turbo" (auto overclocking) processor speed. If the speed of the cpu is still at 3.6 Ghz
  Perhaps because of the RAM being set at 1600 Mhz. If you set the RAM by default in the BIOS, it won't
  stop the cpu of the use of turbo mode when he needs extra grunt.
  It is also possible (I have not used a processor with turbo, then only speculate) the cpu OC is the RAM at 1600 Mhz in turbo mode.
  This could be checked if the speed of the RAM is the default value (which would be 1066 or 1333 Mhz)
  in the BIOS.
  The mini dumps have nothing conclusive. That there is a memory management problem. They suggest a possible driver conflict but cannot identify the driver.
  A possible such driver comes with Daemon tools. If you have Daemon tools installed, then
  the link below shows how to get rid of the driver.

  BSOD in the use of the high memory, fltmgr.sys - Windows 7-Forums

  A msinfo32 report is usually suggested to be included with the mini dump and can
  reveal something more.

  .