has anyone used timelinejs in an apex application?

Similar Questions

• Has anyone used HP200LX (or HP100LX) Cpack software on a PC VAIO VGN-P11Z/Q?

  Has anyone used HP200LX (or HP100LX) Cpack software on a PC VAIO VGN-P11Z/Q?

  I've been using Cpack of HP100lx under Win XP software without problem on several stand-alone for a long time; However, I tried to run on a Vaio VGN-P11Z/Q under Win XP without success: the screen out blacks or give me the fatal blue screen of windows.  (I also tried the hp200Lx top of sama obtaining Cpack software bad results). I wonder if someone could help me solve this problem. Thank you.  Summary of the specification of the VAIO VGN-P11Z/Q:

  • Processor Intel Atom Z520 (1.33 GHz, 512 KB L2 cache)
  • Intel SCH US15W chipset with Mobile Intel GMA 500 graphics
  • 2 GB 533 MHz DDR2-SDRAM
  • X-black LED backlit 8 inches (native resolution of 1,600 x 768)
  • Hard disk of 60 GB ATA/100 4 200 RPM
  • Two USB 2.0 ports, a headphone jack 3.5 mm and a port replicator connector (for Gigabit Ethernet/VGA)
  • Integrated HSDPA (7.2Mbps) and 802.11b/g/Draft-n
  • Bluetooth 2.1 + EDR
  • Stereo speakers and built-in microphone
  • 0.3 megapixel webcam
  • Memory Stick and SD card slots.
  • Running Windows XP

  Hello

  Please follow the instructions in the link below.

  http://support.Microsoft.com/kb/827663

• has anyone used webserive with kxml library to blackberry?

  has anyone used webserive with kxml library to blackberry? If so can u please guide me and give me the example for the same...

  I mean examples of code for blackberry...

  Yes I want to read the xml response, but I want to read using xpath, which is possible using the kxml2 library. but for this I couldn't find the example so I need...

• need to check if a table is used nowhere in an APEX application

  Hello
  I need to know if a table is used within our APEX applications before as I have let down some of her columns. The table is not from the database of the APEX and would be used through dblink. Is it possible to do?
  Thank you very much
  Irina

  Irina,

  In the Application Builder page. upward on the toolbar under the name of your workspace. There is a text box Search Application;

  Type a string for your table name and APEX will search in any of the Application for this channel.

  Jeff

• BlackBerry Smartphones has anyone used successfully more academic Blackboard on their BB curve?

  I can not get the Blackboard application works correctly and I was wondering if anyone has run on their BB curve?

  I can connect to the Blackboard with BB browser, but once I was in I could not go anywhere from there.

  Thanks, I'll try the Bolt browser!

• has anyone used gandi as a ftp host to launch the site of muse? I'm having problems connecting to the ftp server...

  I use gandi as my webhost, but unable to connect to their server ftp to launch my site... any who use before Gandy & have problems/suggestions for me to go on the launch? Maybe, I need to sign up for their package "basic accommodation", but thought before diving into this process, I would like to check if anyone has a similar experience... Thank you!

  Hello

  According to the details provided by you I guess you bought the domain at Gandi, but you want to host on Business Catalyst.

  In my view, that the field is thehivestud.io.

  And you have set incorrect NS records at the end of the Registrar as below:

  LV 1: ns3.worldsecuresystems.com - 54.252.148.151

  LV 2: ns2.worldsecuresystems.com - 54.246.209.121

  LV 3: ns1.worldsecuresystems.com - 54.236.190.129

  They must be as follows:

  LV 1: ns3.worldsecuresystems.com

  LV 2: ns2.worldsecuresystems.com

  LV 3: ns1.worldsecuresystems.com

  Properly update the Registrar of domain and you will be ready.

  Concerning

  Vivek

• Has anyone used LABjs or Requirejs successfully?

  Hi I want to use requirejs or LABjs to load the js files,

  It must be so frickin long to test on the environment of bb that debugging is crazy, tiny change takes forever, to remedy this I thought why not ask here .

  Here's what I have if your up to test yourself.

  Enter requirejs

  Throw it in your directory:

  It's a way that I tried, I also removed the base and the paths of the config

  I get the alert requiring is responsible, but here, no error or something, someone has already tried to firebug lite here?

  Oh nvm I figured it

  best way is to use paths with local: / / / so the one at the top

  I went through and removed my app and installed the new and for some reason that it worked.

  so apparently the best practice is to install the app, test, remove app rinse repeat

• Has anyone used QooQees respond Responsive Widget?

  I downloaded the widget with the idea to use it to create appropriate anchors. I tried to find how to use it, but can't seem to make it work. I sent an email to QooQee but not yet a response yet. Anyone know how I can get this to work? Thanks in advance.

  Thanks for the reply, I'll give it a try later so will you said into account. Ironically QooQee emailed shortly after I posted this!

• Has anyone used shows them in a kayak? Or simply the potential of water damage is too big?

  Used AAnyone shows them in a kayak?  Or is it too much of a risk of water?

  Hello

  Your watch is splash and resistant to water, but it is not waterproof.

  You can learn more about the resistance to water of the shows here:

  On the resistance to water Apple Watch - Apple Support

• has anyone use the 1333 t410 memory?

  Hello

  I want to update my book of t410 2518 4ju.

  In the expedition of Tabuk is info about 8 GB max. I'm looking for people who use 8 GB in this computrers, I would like to know, is that the pleasure is safe

  Second problem is memory speed - should I buy 1333 mhz memory chips? CPUZ shows that my Rams are working real in 1066. In the expedition of Tabuk, I found info on 1066 MHz memory speed. Maybe something is changed?

  Please, if you use more than 4 GB of ram in T410 2518 4JU, or you use faster than 1066 memory, please write your opinion and whole

  concerning

  
  

• Has anyone used a 1 GB sodimm in an Inspiron 4150?

  I have an Inspiron 4150 I am trying to upgrade a little. Unfortunately, I have a common problem - in other words, one of my RAM slots is dead. The official specs for this laptop say 1 GB memory max, in the form of two 512 MB SODIMM modules. Without doubt, who wrote before the existence of unique memory 1 GB sticks.

  In any case, someone has actually tried a single sodimm 1 GB in their 4150? Will it work?

  
  

• How can I create an interactive database report using internal functions of APEX?

  Hello

  We are currently migrating our client applications of APEX 4.2 to 5 APEX. One of these APEX applications using Excel to create a page of interactive report. This means that the user can select a view, materialized in the Excel plugin as a source and he or she can select columns. After you save the changes, a stored procedure uses wwv_flow_api.create_page (...), wwv_flow_api.create_worksheet (...), wwv_flow_api.create_worksheet_rpt (...) to create a new page in the Apex with the sql query generated. To synchronize report columns, wwv_flow_worksheet_standard.synch_report_columns has been used so far (4 Apex). Apex 5 call Wwv_flow_worksheet_standard.synch_report_columns will return "Internal error ORA - 20987 APEX".

  We can create a new page in the Apex with an interactive report, but the report columns are not created. If I edit this page in the application builder and add a dummy column to the query of source of interactive report, all columns will be created. Therefore, there is a solution to create and display columns of APEX 5 report, which must be done by synch_report_columns.

  I know that it is not recommended to use not documented, apex-internal functions and procedures, but we have currently no time to implement another solution. It would be great if we could use the built-in apex to create an interactive report from a given sql query.

  Does anyone have any experience with creating a page from base to APEX 5 apex? Or is anyone know how we can sync/update the columns of an interactive report without manually adding a dummy column?

  In which case it is important: we use a database of Oracle 12 c and our theme is not universal theme.

  Thanks for your help,

  Elizabeth

  Hi Elizabeth,.

  Take a look at apex_app_builder.create_ir_page which is used by the packed app 'Data Reporter'. This type of support and also simplifies the creation of a page of the IR from the line level API set that you used before. For details have a look at the procedure of add_report_page of the EBA_DP package which is installed by the app package.

  Concerning

  Patrick

• Limitation of the APEX: sharing pages between several APEX applications

  I was hoping if someone with a little more experience architect APEX could comment on some of the limitations that I see and I have to make good decisions, working around the problem.
  
  Any suggestions are welcome.
  
  One of the limitations I've seen, it's how APEX handles applications and pages. Each application appears as an island, it has its own set of pages, the processes of connection, templates, CSS, JS, references etc.. Regarding the CSS and Javascript, you can be defined in a central location, but still, every new developed APEX application must be configured to make use of your 'standard '.
  
  The more traditional web solutions showing each as stand-alone web page and any web page can call/reference any other page and pass information to session between them.
  
  With APEX, however this doesn't seem to be the case.
  
  A solution would be to have a huge demand for APEX, where all the pages are the property of this unique application.
  
  Unfortunately, we use of APEX and EBS R11 (& R12) together; all APEX applications are started in the menus of the EBS. I had drawn a SSO solution between the two (without using oracle SSO). However, each APEX application is unique, as small modules instead of complete applications. In other words, we tend to use APEX as an alternative for Oracle Forms - each APEX application is a standalone program.
  
  I always wanted to be able to apply the same connection process and look and feel in the brand new APEX app we write.
  
  The way I went to this subject has been meticulously creating a 'model' APEX application. Embedded in the application of this model are all our shared CSS, JS and models that apply the site appearance. It also contains our custom library of signature unique code and debugging custom logger (think log4j but for APEX).
  
  So whenever a developer began work on a new APEX application, they start by cloning the model and automatically inherit all the functionally and website presentation.
  
  My concern is if this is really the best way to do it, or if I'm missing something?
  
  I am also concerned move forward when I wants to establish the change in appearance across all of our web applications that I need to touch each APEX application since. I'm trying to mitigate this by ensuring that almost all the programming logic is contained in packages of PL/SQL, CSS and Javascript only referenced and external application of the APEX. But this does not always with models, or with a logic that is rooted in the actual pages of the APEX etc.
  
  At least APEX allows you to easily enough copy pages between applications, but it does compare not just to have a single page shared between all applications of the APEX.
  
  Is there a better way to go about this?

  Hi attis.

  I think you can't really compare a module with an APEX application forms. I wouldn't say to create an APEX application every time when you have created a module of forms in the past.
  A forms module is just a few pages of an application to the APEX. Then you really should have more then a few pages in an APEX application. Certainly, a huge application is also not the way to go, but I group them for example by logical areas such as HR, logistics, order...

  As Sc0tt already mentioned, you must use the 'Subscribe' mechanism of shared components to make it easier to update all your applications with the model updates. But there is more, you should also share your user name and just have in one place and use the "simple APEX based SSO" that allows all applications within a workspace can share the same session. Simply set the 'Cookie' namesake in your authentication for all your applications and when you bind an application to another and include a valid session id you should not have to log in again and you can also set the session state in that other application.

  So here's what I'd do

  (1) creating a master application that contains
  (a) your theme and other components shared that you want to share
  (b) must be also some basic navigation lists to navigate between your applications...
  (c) create a sign with the name "Redirect to connect main app" and type accounts APEX (no matter) where you define the name of 'Cookie' to 'Cbx_missmost' and the URL of invalid session to the login page of your creation 'hand connection app '. For example: f? p = 9999:101: & SESSION.

  (2) create a model application which is a copy of the claim, but where change you the "subscription" of your models, authentication scheme and components shared in the main application. This will serve as your App developers if they want to create a new application.

  (3) create your 'hand connection app' (eg. app 9999 id) by
  ) a copy of your new model application
  (b) remove the inside authentication scheme (this is just made for this main connection app)
  (c) create a new type to use. But important: set the name of 'Cookie' to 'Cbx_missmost '. This will ensure that all applications have the same session cookie.
  (d) If you use APEX 4.1.1 you will automatically be redirected to the calling application after successful login.

  (4) start to create new applications by copying your 'model' application that contains all subscriptions.

  (5) If you run this application, it automatically redirects to your main connection application if the current session is not valid. This will avoid to have the same logic of authentication in your applications.

  (6) If you need to change your templates or shared components you just do in the "master" application and click on the "publish" button to push the changes for all your applications.

  But still, try to avoid many small applications, I think that make handling just unnecessarily complicated. It is an APEX application has a few hundred pages. For example, our APEX app Builder (app 4000) has more than 1260 pages.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• How to move or delete an APEX application programmatically using application_id and / or aliases?

  Oracle db 11 g 2

  Oracle APEX 4.2.1

  Linux RHEL 6.3

  ------------------------

  Is anyone know the function or procedure to remove or delete an APEX application programmatically using application_id and / or aliases?

  The best I can Google is:

  wwv_flow_api.remove_flow (application_id); -to drop id app by app of APEX

  Any other suggestions?  Any call APEX API I do (I do not see in the APEX API Ref).

  Thanks to a bouquet.

  Hi tx

  We use a script that calls these procedure packed high-end APEX api indeed.

  This script (called: uninstall) is called from one in Linux. Sh script file

  In our case, the application and space to work used the same name, but you can easeliy that adapt to your situation.

  The script is called in the script as .sh

  $> sqlplus / as sysdba @de - install.sql

  The script has the following content:

  DECLARE

  / * End: uninstall Apex

  Settings: 1 = name of work/application space

  */

  l_application_id NUMBER;

  BEGIN

  SELECT Application_id

  IN l_application_id

  Of apex_applications

  Workspace WHERE the = ' & 1' AND alias = ' &1';. ' -find the application with a given name to a certain workspace (with the same name)

  wwv_flow_api.set_security_group_id (p_security_group_id-online APEX_UTIL. FIND_SECURITY_GROUP_ID('&1'));) -sets the security group so that you can remove this application

  wwv_flow_api.remove_flow (l_application_id); -remove the application

  EXCEPTION

  WHEN NO_DATA_FOUND THEN - say nothing when the application does not exist

  NULL;

  END;

  /

  output

  Hope this helps you

  Best regards, Wouter

• Using the EBS API from Apex application?

  Can anyone tell me any documentation on that?
  
  I'm looking into our options, we have a customer who is using management commands and want to create a web form through Apex at the entrance of all orders.
  
  I know we could build something and store data to an intermediate table of sorts, then call a program simultaneous to take data and create orders. But I was looking for a more effective method like calling the API (plsql packets) directly from the APEX page?
  
  I'm not sure if something along these lines is possible?
  
  Thoughts?
  
  Jeremy

  Hello

  You can call these APIs (plsql packets) directly from the APEX page?

  Yes you can, simply call the API to an Apex "after submit' process. This article (http://www.oracle.com/technology/products/database/application_express/pdf/apex_ebs_wp_cabot_consulting.pdf) has some details.

  How to configure your application is so important. Many of the more complex APIs require that the current scheme for the session's APPS and consequently the Apex application must be associated with the APPS schema so that the SQL is parsed as APPS.

  Also, for performance reasons, it is sometimes preferable for Apex validate and load data into a staging table and then use a process of Apex for the kickoff a custom concurrent application which runs in the background and calls the API to load the data into the tables of the EBS.

  Rod West