Have updated to maverick no drivers for printer or scanner says no software installed.

Similar Questions

• Pro9 Acrobat on Mac suddenly will not print pdf unless I put it on the Image to print.  Downloaded drivers for printer Canon updated and rebooted - same problem.  Problem appeared after update of Adobe, but not sure we - in the last 45 days.

  Acrobat 9 pro, suddenly will not print pdf except for the print image.  Begun in the last 45 days after the update from Adobe.  Have installed drivers for Canon updated and rebooted, but no change.

  If you look at system requirements for Acrobat 9 for Mac, you will see that it is only compatible with Mac OS X v. 10.4.11 or 10.5.

• I don't find Windows 7 drivers for printer hp deskjet 970c on the HP website.

  Hewlett-Packard doesn't seem to have a driver for this printer in windows 7

  Hello
   
   
  
  1. could you give us the model number full of this printer?
   
   
  I. find the exact model of your printer.
  With the model number, you have given I was able to follow the two different printers HP Deskjet 970cse printer and HP Deskjet 970cxi Printer.
  Here is the link.
  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=DeskJet+970C&submit=go+%BB
   
   
  II. download link for both printers.
  And two printers have Windows 7 drivers available. I have listed the links below to download the drivers.
  HP Deskjet 970cse printer range.
  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=60097&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20 A.
  b. HP Deskjet 970cxi Printer
  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=61818&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20 A.
   
  III. information additional aboput installation of printers.
  You can check the items below for additional help on hardware drivers and installing printers in Windows 7.
   
  a. install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
   
  b. find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
  
  c. maintain a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  d. automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need to update the BIOS and drivers for Satellite Satellite Pro A10

  I have a Toshiba Satellite SPA10 model num E = 09VYL-PSA15-EN. I searched everywhere but can not find update BIOS and drivers for this model of laptop.

  Please provide me with a link.

  Hello Debbie

  There is no such thing as SPA10 satellite. You either have Satellite A10 or P10. Please check on the label at the bottom of your laptop. Correctly identify your laptop model and you will find everything you need on Toshiba download page.

• Re: Drivers for printer Scanner Fax E-studio 200s

  Hello guys,.

  I have the model e-studio 200 s (printer + scanner + fax) and I can't find the drivers.
  I visit the http://www.eid.toshiba.com/support/drivers/drivers.shtml and I download the drivers for GA-1030 and GA-1031.
  I try and the USB and Com port but nothing.

  Firstly, I download the right drivers for my machine?
  And on the other hand, I want to use 2 PC (server: win2000 and second in windows xp + sp2).

  Thank you.

  Hello

  Why you chose the drivers for GA-1030 and 1031 GA?

  You've got an e-studio 200s then choose the copiers-e-Studio 200 >

  Then, you should get the correct drivers!

• HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

  This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

  I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

  Thank you.

  Hello

  Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

  Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

  In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

  Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

  Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

  Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

  From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

  Now, try to reinstall the most recent drivers and check for the difference.

• drivers for printer 2840

  Hello

  I have a HP all in one 2840 printer.  He constantly live and I have to go re-download the drivers.  However, when I went there today he says that is not what can be downloaded.  Anyone know why or how to get the drivers

  Thank you

  LueyD

  OK I'll do it like this but I used to find the drivers on the hp site much easier to unplug computers and plug it into the printer whenever she decides to not work
  Well thank you very much for the replies

• Compatible with MAC OS 10 system drivers for printer HP 5 L

  Is one knows if pilots for 5L HP printer compatible with MAC OS 10 telephony are available? We have drivers for MAC OS 9 system, but they do not work with MAC OS 10 system? Thank you for your help.

  Hello

  Although it is not clear of what version of OS X you are referring to, the Laserjet 5 L printer is not supported on Mac OS X 10.8:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c03411613

  The same also applies to OS X 10.7 and 10.6 as well:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=25480&prodTypeId=18972&prodSeriesId=25480&ObjectID=c02925114

  If you have any of the operating systems mentioned above, although this is not officially supported you may still try the 3rd pilot third HPIJS which compatiblw with any of these versions of OS and list printers Laserjet 5 L as supported.

  Don't forget to install one of the 3 required downloads before using the printer Set Up Instructions below:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs

  Good luck

  Shlomi

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Need drivers for printer Windows 7 to Acrobat Pro DC?

  When I try to print a PDF printer is just in a cycle with no end of printing without printing anything.  You have a driver for my Windows 7 program?

  Please refer to Adobe - PostScript printer drivers: for Windows

  See if that helps.

  Thank you

  Varun

• Where to find the Vista drivers for printer Toshiba Estudio 170F

  I need estudio 170F drivers for Vista

  Hi Igor

  Maybe Google can help, but on the support page for laptop certainly not find here any printer driver. Talk to your local dealer or technical assistance from Toshiba for printers.

• Can not find the drivers for printer Canon CP400

  Cannot copy my photos on printer Canon CP 400. It works ok on Windows XP, but on Windows 7 It keeps me saying no driver

  There are some Windows 7 drivers for the CP400 Canon on the Canon support site: http://usa.canon.com/cusa/support/consumer/printers_multifunction/selphy_compact_photo_series/selphy_cp400#DriversAndSoftware

• Can I use the device drivers XP (printer and scanner) with Windows 7 Professional in XP mode?

  I have a Business Inkjet 2800 printer and scanner HP Scanjet 5470c on my XP PCs that HP doesn't provide drivers for Windows 7.

  Can I attach these devices for my new PC running Windows 7 Professional in XP mode?  I have searched for hours on the site of Microsoft and Google, but couldn't find a definitive answer.  Any information would be appreciated. Thank you.  Ed

  You could attach and use both in XP Mode with XP drivers.

  There is a driver Windows 7 for Business Inkjet 2800. Go to control Panel\Hardware and Sound\Devices and printers and select Add a printer. When the list of drivers, update Windows Update and there is under the heading of HP drivers.

• DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

  My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

  The task was ok until the bond required of the Dekjet to the USB port.

  Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

  The system indicates that the problems appear in the USBsetup.exe

  Can someone help on this subject?

  Horacio

  Hi @Horacio_B,

  Thanks for joining the Forums of HP Support for a solution to your installation problem.

  I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

  I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

  Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• beatsaudio all in one office: drivers for broadcom WLAN dual band do not install

  After the upgrade to windows 10, I checked the updates from Microsoft and HP through the HP support Assistant.  All updates installed HP exceptiont for 'dual-band Broadcom WLAN drivers for Windows 10'. It will go through the controls and good download.  I retried several times after you restart the computer.  Also do not install is Office XP Service pack 3 - microsoft updates.  Error message 0 x 80096004.  I was wondering if I missed something.

  Hello

  I seemed to have solved my problem with the installation. I went on HP website and download drivers page

  http://WWW8.HP.com/UK/en/drivers.html

  then I went through the features of the device (I put in my model number product after choosing a couple of options).

  This led me to a page showing a photo and a description of my all-in-one and below and on the left side who has been

  Solution and Update Finder

  • Troubleshooting
  • Software and Drivers 3
  • How
  • Product information
  • User guides
  • Video tutorials
  • Several Support Options

  Solution and Update Finder

  The update and the Solution finder scans the connected HP product that you use to identify and recommend possible solutions:

  • Software and firmware updates or missing drivers
  • Errors and hardware problems

  Find Solutions

  How to install the software and collect HP?