Having a problem installing a program. Get the BSOD. Can I try to install in safe mode or in execution of the order?

Similar Questions

• Getting the error "there was a problem starting C:\Program. The specified module could not be found"during the uninstallation of Panda antivirus.

  When I try to download a new security software on my laptop, he insisted first of all, I uninstall my existing software, but when I click on uninstall, I get the following message:

  "There was a problem starting C:\Program. The specified module could not be found. »

  Then, I went in my C: drive and tried to uninstall by clicking on it and clicking Security software on uninstall, but the same message came.

  Help, please!  I don't know that I now have no security.

  Thank you.

  Original title: Windows 8 - error DLL Run

  Use the uninstall program to remove it from the computer:

  http://www.pandasecurity.com/resources/SOP/Uninstaller.exe

  Directions for use:

  http://www.pandasecurity.com/homeusers/support/card?ID=55509

• I'm having a problem installing Premier Pro cs6, I open it after the instalation can´t

  I'm having a problem installing Premier Pro cs6, I open it after the instalation, my pc its 32-bit can´t, it can work with that?

  No.... Premiere Pro requires a 64-bit operating system

  Premiere Elements is a 32-bit version

  Purchase http://www.adobe.com/in/products/photoshop-premiere-elements.html

• I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  Hi Laurent,.

  Please try the steps listed in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

  Kind regards

  Rave

• I'm having a problem installing my laptop any idea how should I di it?

  I am having a problem installing my printer to laptop can help you how should I do?

  Perhaps you could share the brand and model with us.

  Have you been on the printer manufacturer driver support site yet?

  Or here... http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• Problem installing Windows XP Mode in 7 Winjdows

  I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram.  This machine supports hardware virtualization, and it is enabled in the BIOS.

  Before downloading software in XP Mode, the MS download required Windows validation Web site.  Downloaded and reported validation validation and a successful installation.  Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko).  Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.
  According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."
  My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked.  There is, however, a new directory called
  c:\ProgramFiles\Windows XP Mode\
  but it contains no exe file.  It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it.  There is also a tutorial subdirectory.
  I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed.  Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.
  I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."
  If at this point, my question is simple, "what to try next?
  Thanks in advance.

  The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.

  You must install both files:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run

  Restart the system, and then install:

  2 WindowsXPMode_en-we

  ------------

  Uninstall Windows XP Mode:

  Click Start, type: programs and features

  Press enter on your keyboard

  Scroll down

  Select Windows XP Mode

  Click Change/uninstall in the command bar

  Uninstall Windows XP Mode

  -----------------

  Restart your computer

  Proceed with the installation of Windows XP Mode in the right order.

  --------------

  If it does not always show upward:

  Click Start, type: enable or disable windows features

  Scroll down

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows updates can be installed in safe mode with networking?

  Re: Vista Home Premium 32 bit w/sp2.

  Windows update takes forever to download and even more time to install any update files. Then it configures when stopping down, then he sets up when power is on, oops one of your edits was not able to install and all the process begins again. I absolutely refuse to let the process run on its own if it is not an option. I personally oversee what, when and if something moved at all. I was wondering if updates can be installed in safe mode with network for a minimum amount of system resources are used and this could help speed up things a bit.

  Re: Vista Home Premium 32 bit w/sp2.

  Windows update takes forever to download and even more time to install any update files. Then it configures when stopping down, then he sets up when power is on, oops one of your edits was not able to install and all the process begins again. I absolutely refuse to let the process run on its own if it is not an option. I personally oversee what, when and if something moved at all. I was wondering if updates can be installed in safe mode with network for a minimum amount of system resources are used and this could help speed up things a bit.

  Clean boot the computer to see if that helps: http://support.microsoft.com/kb/929135

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

• I'm having a problem with "Windows Installer"... Can't find a way to heal or recharge the program?

  I'm having a problem with "Windows Installer"... Impossible to find a solution to heal or recharge the program

  Hello

  1. what question do you face with Windows install on your computer?
  2. do you have an error message regarding the Windows Installer on your computer? If Yes, what is the error message?
  3. what task you were trying to do when you got the error message?
  4. have you done any software or hardware changes on your computer before this problem?

  Please refer to the section: Windows Installer issues in the following link.

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651/#reso1

  Further,.

  Please responses to the above questions and add additional information so that we can better guide you.

• I can't install the new program in my laptop and delete old programs, get the error message "windows service install is not installed correctly.

  I have problem with installer in windows vista, I can not install the new program in my laptop and delete old programs.

  I can't update windows vista.

  Help me fix my laptop.

  Solve the problem. I reinstal windows vista, I have install microsoft security, I don't use antivirus hid the dangerous virus. I use more cnet.com is very dangerous.

• Impossible to download programs, get the error could not access network location %APPDATA%\protector.exe

  Help, please

  I am trying to download the new version of Microsoft Messenger and get up then stop downloading and I gat the message - could access the network % APPDATA%\.--aussi location, I get the same message when trying to domnload i tunes.  CAN ANYONE HELP PLEASE.

  Hi, Neil,.

  FixIt - You receive an "Error 1606" error message when you try to install or remove a program from Microsoft

  http://support.Microsoft.com/kb/886549

  You can also try to create a new user account.  Retry - the same problem occurs in the new account?  If this isn't the case, you have a corrupted profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Error 1606: Could not access network location %APPDATA%\protector.exe

  http://forums.techarena.in/operating-systems/1127524.htm

• Installation of elements of problems. I always get the info to download the Advisor after installation

  Version of 64-bit items downloaded 4times, installed a desinstallion delete all including the time adobe in the registry. I have alwas get the info to download the Advisor after installation! I have the file on my desktop, but nothing else!

  Hi gerhards34108030,

  I'm sorry that you are having a frustrating installation. You receive the prompt to download the Advisor because a previously installed Adobe app has been incorrectly removed. You can use the Adobe Creative Cloud cleaning tool to resolve installation problems.

  If this does not resolve your problem, we need additional information to solve problems. What is your operating system and which version of elements are you installing? This is Photoshop or Premiere elements?

  Best,

  Del

• When you try to open a program, get the area "Choose the program you want to use to open this file".

  When I try and open a program I get the box "choose the program you want to use to open this file. Also, when I try and access any of my icons in my control panel, I get a message saying 'C:\WINDOWS/system32/rundll32.exe. Aplication not found. "

  Uninstall mywebsearch toolbar, Zynga, my fun cards

  Check these then check fix checked. Narrow browsers

  O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - (no file)

  O3 - Toolbar: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - (no file)

  O4 - HKLM\... \Run: [NeroFilterCheck] C:\WINDOWS\system32\NeroCheck.exe

  O4 - HKLM\... \Run: [HP Software Update] C:\Program HP HP Software Update\HPWuSchd2.exe

  O4 - HKLM\... \Run: [QuickTime Task] "C:\Program Files\QuickTime\qttask.exe" - atboottime

  O4 - HKLM\... \Run: [MyWebSearch Plugin] rundll32 C:\PROGRA~1\MYWEBS~1\bar\1.bin\M3PLUGIN. DLL, UPF

  O4 - HKLM\... \Run: [my Web Search Bar scope monitor research] "C:\PROGRA~1\MYWEBS~1\bar\1.bin\m3SrchMn.exe" / m = 2/w/h

  O4 - HKLM\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  O4 - HKLM\... \Run: [SunJavaUpdateSched] "C:\Program Files\Fichiers Java Update\jusched.exe"

  O4 - HKLM\... \Run: [adobe Reader Speed Launcher] "C:\Program 9.0\Reader\Reader_sl.exe Adobe."

  O4 - HKLM\... \Run: C:\PROGRA~1\MYFUNC~2\bar\1.bin\c8brmon.exe [MyFunCardsbarIE Browser Plugin Loader]

  O4 - HKLM\... \Run: [TkBellExe] "C:\program files\real\realplayer\update\realsched.exe" - osboot

  O4 - HKLM\... \Run: [KernelFaultCheck] %systemroot%\system32\dumprep 0-k

  O4 - HKCU\... \Run: [BitTorrent DNA] "C:\Program Files\DNA\btdna.exe"

  O4 - HKCU\... \Run: [BitTorrent] "C:\Program Files\BitTorrent\bittorrent.exe".

  O4 - HKCU\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  Then download malwarebytesto day then do a full scan

  You are probably infected by something you downloaded with bittorrent

• Not able to download the anti-virus program, get the error "your security settings do not allow this program to download."

  Been trying to download the Microsoft Safety Scanner and AVG free antivirus program but continue to get the following message: "your security settings do not allow this program to download." I deleted an obsolete Mcafee antivirus program and checked my security settings, and all that are in their default settings.  Any suggestions?

  Hello

  I suggest that you run the McAfee removal tool to make sure that McAfee is completely uninstalled from the computer:
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  You can check the link for details on the Microsoft and Microsoft Security essential safety Scanner and also you can download from the link.
  Microsoft security scanner:
  http://www.Microsoft.com/security/scanner/en-GB/default.aspx
  Security Essentials from Microsoft:
  http://www.Microsoft.com/security/PC-security/MSE.aspx

  I also suggest that you send the query linked to Microsoft Security Essentials in the forum link provided and check.
  http://answers.Microsoft.com/en-us/protect

• AP1131 - of-Authenticationing problem - problem users did not get the IP

  Users connected to the AP1131G cannot get DHCP!

  Hi all

  I hope that we can find a solution for my problem.

  I have access point AIR-AP1131G-E-K9 and connected to the switch 2960, under port configuration is:

  interface F0/24

  switchport mode access

  switchport access vlan 63

  switchport voice vlan 62

  !

  !

  I configured on it two SSID, on for users and the other for the voice that is hidden.

  The SSID security user.

  but the voice SSID has no security restrictions.

  (The main problem is any user to connect to AP1131G, he or she cannot get the IP via DHCP, but voice can get DHCP and connected normally)

  -Configuring AP-

  Admin-AP1 #sh run

  Building configuration...

  Current configuration: 2462 bytes

  !

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  hostname Admin-AP1

  !

  enable secret 5 iL05 $1$ $ CMki6n7Twwea0QLL58oCg0

  !

  No aaa new-model

  !

  resources policy

  !

  IP subnet zero

  !

  !

  !

  SSID dot11 HW-Admin-AP1

  VLAN 63

  open authentication

  Comments-mode

  MBSSID-guest mode

  !

  dot11 ssid voip

  VLAN 62

  open authentication

  !

  diet pre-standard trading online

  !

  !

  123A0C041104 Cisco 7 password username

  !

  Bridge IRB

  !

  !

  interface Dot11Radio0

  no ip address

  no ip route cache

  !

  VLAN 63 key 1 size 40 bit 7 589074CFA6CD transmit encryption keys

  encryption vlan 63 compulsory wep mode

  !

  VLAN 62 key 1 size 40 bit 7 76B3B1F212E9 transmit encryption keys

  encryption vlan 62 mandatory wep mode

  !

  SSID HW-Admin-AP1

  !

  SSID voip

  !

  MBSSID

  root of station-role

  Bridge-Group 1

  Bridge-Group 1 block-unknown-source

  No source of bridge-Group 1-learning

  unicast bridge-Group 1-floods

  Bridge-Group 1 covering-disabled people

  !

  interface Dot11Radio0.62

  encapsulation dot1Q 62

  no ip route cache

  no link-status of snmp trap

  Bridge-group 62

  Bridge-group subscriber-loop-control 62

  Bridge-group 62 block-unknown-source

  No source of bridge-group 62-learning

  No bridge group 62 unicast-flooding

  Bridge-group 62 covering people with reduced mobility

  !

  interface Dot11Radio0.63

  encapsulation dot1Q 63

  no ip route cache

  no link-status of snmp trap

  Bridge-group 63

  Bridge-group subscriber-loop-control 63

  Bridge-group 63 block-unknown-source

  No source of bridge-group 63-learning

  No bridge group 63 unicast-flooding

  Bridge-group 63 covering people with reduced mobility

  !

  interface FastEthernet0

  no ip address

  no ip route cache

  automatic duplex

  automatic speed

  Bridge-Group 1

  No source of bridge-Group 1-learning

  Bridge-Group 1 covering-disabled people

  !

  interface FastEthernet0.62

  encapsulation dot1Q 62

  no ip route cache

  no link-status of snmp trap

  Bridge-group 62

  No source of bridge-group 62-learning

  !

  interface FastEthernet0.63

  encapsulation dot1Q 63

  no ip route cache

  no link-status of snmp trap

  Bridge-group 63

  No source of bridge-group 63-learning

  !

  interface BVI1

  IP 172.18.63.2 255.255.255.0

  no ip route cache

  !

  default IP gateway - 172.18.63.1

  IP http server

  no ip http secure server

  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

  1 channel ip bridge

  !

  !

  !

  Line con 0

  password 7 1101180B1632595C557A

  line vty 0 4

  password 7 09444F07182545425A5C

  Synchronous recording

  opening of session

  !

  end

  -----------------------------------------------------

  I would like to know what is the problem for my setup? If there is a problem?

  I need to know why he doesn't connect as voice phones works normally and get IP via DHCP addresses.

  I would like to mention here that the source DHCP for the two vlan is same source (Core) and here it is the configuration in this topic.

  DHCP excluded-address IP 172.18.63.1 172.18.63.50

  !

  H-VLAN-wireless dhcp IP pool

  network 172.18.63.0 255.255.255.0

  DNS-server 172.18.11.16 172.18.11.18

  domain hw.net

  router by default - 172.18.63.1

  !

  pool IP dhcp H-VLAN-Users

  network 172.18.61.0 255.255.255.0

  router by default - 172.18.61.10

  DNS-server 172.18.11.16 172.18.11.18

  domain hw.net

  -172.18.11.18 NetBIOS name server

  !

  !

  ----------------------------------------------------------

  If anyone can help me how to troublehsoot this problem and how to determine the problem.

  Hello

  Change the Switchport Trunk conifig...

  On the SWITCH

  ============

  int fa 0/24

  switchport trunk dot1Q encap

  switchport mode trunk

  switchiport trunk vlan native 63

  No tap

  end

  Access point

  =========

  conf t

  interface Dot11Radio0.63

  63 native encapsulation dot1Q

  Bridge-Group 1

  end

  conf t

  int fa 0.63

  dotQ native 63 encap

  Bridge-Group 1

  end

  That will do it for you! Let me know if this answers your question!

  Please do not forget to note the useful messages!