Having a problem using the request of Sirius/XM.

Similar Questions

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• I'm having a problem in the activation. Trying to enter the key but it says try again a new key.

  I'm having a problem in the activation

  I am trying to enter the key but it says try again a new key, I have reinstalled windows on my pc when I bury the key, it is said, what can I do?

  Is it an upgrade license? If so, try the following:

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is the way it should lo

  I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
  It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
  [email address removed to protect your privacy and security]

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• Having a problem with the Muse crashing when opening a Web site I designed in Muse.

  Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

  [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

  All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

  Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

• Ideas re: ' Connect-VIServer: could not connect using the requested protocol "failure

  I know, it's a matter of weakness, but I hit the wall on this one. I've even got desperate enough that bouncing private LuD, and I tried everything we discussed, but I'm still @ deadlocked.

  I developed and tested several scripts that I am finally ready to go with Prod.

  I get this error when I am trying to connect to Vcenter server or host of the cmndline of vitoolkit (and obviously in scripts).

  «Connect-VIServer: could not connect using the requested protocol.»

  I'm runing the vitoolkit FROM the server VCenter, so I wouldn't exepct the local to be a problem connection. I expect calls the ESX servers as questions) (we have several firewalls in the game). But even once, on-site I would not expect a problem.

  I checked my ports of VC and even more precisely called listener in the connect command, but it does not help.

  I tried to watch the ports through various lines of command, but I don't see anything.

  Any suggestions?

  Add - confirm: $false and it won't be quick.

  =====

  Carter Shanklin

  Read the PowerCLI Blog
  [Follow me on Twitter |] http://twitter.com/cshanklin]

• I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

  I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
  You can restore the default user set prefs ("BOLD") via the context menu.

  • http://KB.mozillazine.org/about:config

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm having a problem, empty the trash

  I'm having a problem emptying the trash. I have downloaded microsoft fix. This cleared up all the other problems with my computer except the Recycle Bin.

  I got it fix executed yesterday from 09:00 to 23:00 last night just on this one issue. The green bar moving across the screen to indicate that something was happening. However at 11 pm last night, I had to shutt off the PC. No idea what elese I can try that the computer runs pretty slow.

  There is nothing showing in the trash when I click on explore but when I put in the cell some files I didn't, but there was still nothing showin in the tray. I checked the properties to make sure that the parameter was not set to remove permentally, which was set to normal of any idea

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =================================

  After the foregoing:

  How to repair a trash corrupted in Windows 7 and Windows Vista
  http://www.Winhelponline.com/blog/fix-corrupted-Recycle-Bin-Windows-7-Vista/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

  Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

  Go to the Photoshop preferences, then on the performance tab.

  From there please click on advanced settings, change the drawing on 'Basic' mode and uncheck the option for "Open CL" once, then try with a Jpeg file.

• I'm having a problem at the opening of the pdf document.  I get the error message: 'Adobe Reader has stopped working ".

  I'm having a problem at the opening of the pdf document.  I get the error message: "Adobe Reader has stopped working" then I get Windows to search online for a solution, but then my document is closed. I tried to uninstall and reinstall Adobe Reader XI, restarted my computer, but it did not help.  I get the same message. What should do?

  Can you open Reader by itself?  If so, check that disable the Protected Mode improves the situation [Edit |] Preferences | (Improved) security].

• Having problems using the Arabic language in Windows 7

  Original title: I have language problem with my windows home Prem 7

  Hello

  I have the problem with languages, the Arabic one.

  When I try to write Arabic words in Notepad or Arab opening for laptop or any file letters Arabs language conversion in order to understand the language.

  And I tried to change the Arabic language in the Control Panel, but there is something missing,

  Look at the picture I captured, look at the space marked in blue

  http://WWW7.0ZZ0.com/2012/12/14/20/187833468.jpg

  where is the meeting?

  How can I solve the problem?

  Hello

   

  Welcome to the Microsoft community!

   

  You have problems in the use of Arabic text.

   

  1. have you installed the language pack?

  2. do you receive any error messages?

   

  If you have not installed the language pack, and then install it from the site:

  Language packs

  http://Windows.Microsoft.com/en-in/Windows/language-packs#lptabs=Win7

  Also visit the site to add or change an input language:

  Add or change an input language

  http://Windows.Microsoft.com/en-in/Windows7/add-or-change-an-input-language

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Problem using the structure returned by the ajax request

  I'll send an ajax request that calls a method in a CFC.  The method executes a query and returns data.  I want to use the option of 'success' of the ajax call to display the return value "myString" in an empty div.  But nothing appears.  Everything else works.  Shouldn't the ajax call back for me "myString" and values "myNumber" which I can then use?  Or do I have the wrong syntax?

  <script src="//code.jquery.com/jquery-1.10.2.js"></script>
      <script>
    function getMyData()  
    { 
    $.ajax({
    type: "post",
    url: "test.cfc",
    dataType: "json",
    data: {
    method: "getMyData",
    city: 'Hartford'
    }
    , success: function(data) {$('#result').html(myString);}
    , error: function(data) {$('#result').html('That failed');}
    });
    $('#anotherDiv').html('Goodbye');
    }
    </script>
  </head>
  <body>
  
  <a href="javascript:()" onclick="getMyData();">
     <div>Click here</div>
  </a> 
  
  <div id="result"></div>
  <div id="anotherDiv"></div>
  

  <cfcomponent>
    <cffunction name="getMyData" access="remote" returntype="struct" returnformat="json">
      <cfset var stcRetVal = StructNew()>
          <cfset stcRetVal.myString = "Hello">
          <cfset stcRetVal.myNumber = 75>
      
          <cfquery datasource="#application.mainDS#">
    insert into test 
              (city) 
              values 
              (<cfqueryparam value="#arguments.city#" cfsqltype="cf_sql_varchar">)
    </cfquery>
  
  
    <cfreturn stcRetVal>
    </cffunction>
  </cfcomponent>
  

  If your function should return you structure JSON like:

  {

  'myString': 'Hello,'

  "myNumber": 75

  }

  When you succeed, you do:

  success: {function (data)}

  $('#result').html (myString);

  }

  whence "myString"?  All that gets you back is in this object 'data '.  So, you might be able to do it instead.  Try to console.log (data) inside your success Manager.

  success: {function (data)}

  $('#result').html (.myString data);

  }